DELPHIN COODER Buka ea mosebelisi

TATAISO MOETSISI

Setha sa alamo ea elektroniki e nang le seamoheli
LITŠOANTŠISO TSA LITŠOANTŠISO:
Sehlopha sa maqhubu: 433.92 MHz
Matla a RF: 5.09 dBm

Kamohelo / mesebetsi:

Maemo a bophahamo ba modumo ea 5 (V-lebili, ho kenyelletsa le mokhoa o khutsitseng)

Lithapo tse 5 tse fapaneng tsa ho saena (lebili la T)
Mokhoa oa ho thothomela (toggle switch - boemo bo nepahetseng)

LI e bontšang li-LED
Litlhophiso tse khethiloeng li boloka mohopolong

ON I Off I VIBRATION fapoha sesebelisoa
Diode ea memori e bonesitsoe khafetsa metsotsoana e 15. kamora ho longoa

Pontšo ea betri e tlase (beep e sa khaotseng ea ho loma)
Mokhoa oa tlhahlobo ea lisebelisoa tsa Kit

Boemo ba 1LIOm ho latela sebaka sa naha
Phepelo ea motlakase lx9V betri

LULA ALARM / mesebetsi:

Ha e kenele metsi

Maemo a bophahamo ba modumo ea 5 (V-lebili, ho kenyelletsa le mokhoa o khutsitseng)
5 melumo e fapaneng ea ho bontša

Maemo a 5 a kutloisiso (lebili la S)
Mebala e 7 e ka bang teng ea diode e bontšang

Litlhophiso tse khethiloeng li boloka mohopolong
Letšoao la mokokotlo - molumo o fapaneng

Diode ea memori e bonesitsoe khafetsa metsotsoana e 15. kamora ho longoa
Pontšo ea betri e tlase ka bipi e khuts'oane

Boemo ba diode bosiu
Bethe ea molamu e sa thellisoang

Ho kenya jack ea 2.5 mm
Phepelo ea motlakase lx12V (mofuta LR23A)

Litaba pata

1 LITLHAKU TSEBONO

2 MOEKETSI

3 KARETE EA TIISETSO

4 Litokomane / Lisebelisoa

4.1 Litšupiso

5 Related Posts

LITLHAKU TSEBONO

MOEKETSI

Pele o qala: Bula sekoaelo se ka morao sa alamo ea seamohedi / ho loma ho kenya libeteri. Ka alamo ea ho loma ka ho hulela karolo e ka tlase holimo, ho moamoheli ka ho e thellela tlase. Alamo ea ho loma e tsamaisoa ke betri ea lx 23A, e e amohelang ka lx 9V. Pele o kenya libeteri, li hlahlobe hantle 'me u netefatse hore ha li tsoe kapa ho senyeha ka litsela tse ling. Kenya libeteri ho latela polarity e nepahetseng (+ le -). Khutlisa sekoaelo 'me u se sireletse.

Ho chencha alamo ea ON / OFF: Ka ho ts'oara konopo e khubelu ea "MATLA" ka lehlakoreng le tlase bakeng sa metsotsoana e 2. Neng ho bulela alamo ea ho loma e lla makhetlo a 3 mme li-LED ka bobeli li bonesa makhetlo a 3. Neng tima, alamo ea ho loma e lla hanngoe 'me ka bobeli li-LED tsa mebala li phatsima hang.

Ho beha molumo oa alamo: Ha alamo e loma, ts'oara konopo e khubelu ea "MATLA" metsotsoana e 5. Alamo e lla hanyane ka hanyane makhetlo a 3

ebe ho utloahala molumo oa bone oa bipi e telele. Kamora lets'oao lena, lokolla konopo ea "MATLA" ebe u khetha molumo o batlang ka ho chencha switch S. Ho netefatsa molumo o khethiloeng, tima alamo ka ho ts'oara konopo e khubelu ea "MATLA" metsotsoana e 2.

Ho fetola mmala oa diode: Ha alamo e loma, ts'oara konopo e khubelu ea "MATLA" metsotsoana e 5. Alamo e qala ho lla makhetlo a 3 ebe ho utloahala molumo oa bone oa bipi e telele. Kamora letšoao lena, lokolla konopo ea "MATLA" ebe u e tobetsa hape hakhutšoanyane. Switcher switjha S e khetha mmala o batlang oa diode. Ho netefatsa mmala o khethiloeng, tima alamo ka ho ts'oara konopo e khubelu ea "MATLA" metsotsoana e 2.

Boemo ba li-LED bosiu: Ka alamo ea ho loma, li-LED tsa boemo li ka buloa / tima ka ho tobetsa konopo ea "MATLA" ka bokhutšoanyane.

Ho kopanya moamoheli le alamo ea ho loma: Ha seamoheli se koetsoe 'me sesebelisoa sa alamo se lutsoe, ts'oara P konopo ka lehlakoreng la seamohedi. Ka nako e le 'ngoe, beha switch ea switch to the ON / left. Tšoara the P konopo ho fihlela diode e khubelu le e putsoa e bonesa. Ha li-LED tsena li bonesa, e lokolle. Joale tobetsa hanyane P konopo ho khetha 'mala o lakatsehang ebe o "loma" ho alamo eo u batlang ho e kopanya, joalo ka pampiri. Ho phethela pairing ka katleho, tima le ho amohela seamohedi.

Teko ea marang-rang: Ha alamo e loma, ts'oara konopo ea "MATLA" metsotsoana e 7. Alamo e lla pele makhetlo a mararo ha khutšoane, ebe molumo oa bone oa bip e telele, o boloka konopo e hatelloa ho fihlela molumo o potlakileng oa beep le li-LED li qala ho bonesa. Hona joale o ka tloha alamo ea ho loma le moamoheli ho fumana hore na e amohela lipontšo ho fihla kae.