Akwụkwọ ntuziaka onye ọrụ DELPHIN COODER

Ntụziaka onye ọrụ

Tọọ mkpu eletrọnịkị ya na nnata
NKE NKE NKE NSOGWU:
Ugboro ugboro: 433.92 MHz
RF ike: 5.09 dBm

Nnata / ọrụ:

Ọkwa olu 5 (ụkwụ V, gụnyere ọnọdụ jụụ)

5 ụda mgbaàmà dị iche iche (T wheel)
Ụdị ịma jijiji (mgbanwe mgbanwe - ọnọdụ ziri ezi)

LI agba mgbama LEDs
Ntọala ahọpụtara na-echekwa na ebe nchekwa

NA m agbanyụrụ m VIBRATION toggle mgba ọkụ
diode ebe nchekwa – ọkụ na-aga n'ihu maka 15 sekọnd. mgbe aruchara ya

Ngosipụta batrị dị ala (ịkpọ ụda na-aga n'ihu)
Ụdị ule nso nke ngwa

Oke 1LIOm dabere na ala
Ọkụ ọkụ lx9V batrị

Mkpu mkpu / ọrụ:

Waterproof

Ọkwa olu 5 (ụkwụ V, gụnyere ọnọdụ jụụ)
5 ụda mgbaàmà dị iche iche

Ọkwa ọgụgụ isi 5 (wheel S)
Agba 7 enwere ike nke diode mgbaàmà

Ntọala ahọpụtara na-echekwa na ebe nchekwa
Mgbama azụ azụ – ụda dị iche iche

diode ebe nchekwa – ọkụ na-aga n'ihu maka 15 sekọnd. mgbe aruchara ya
Ngosipụta batrị dị ala na obere ụda

Ọnọdụ abalị diode
Akwa mkpanaka na-adịghị amị amị

Ntinye maka jakị 2.5 mm
Ọkụ ọkụ lx12V (ụdị LR23A)

ọdịnaya zoo

1 Atụmatụ bọtịnụ

2 Akwụkwọ ntuziaka

3 Kaadị akwụkwọ ikike

4 Akwụkwọ / akụrụngwa

4.1 Ntụaka

5 Ozi ndị metụtara

Atụmatụ bọtịnụ

Akwụkwọ ntuziaka

Tupu ịmalite: Mepee mkpuchi azụ nke oti mkpu nnata/tapịa iji fanye batrị. Na oti mkpu na-ata ahụhụ site na ịdọrọ akụkụ ala elu, na onye nnata site n'itinye ya ala. Oti mkpu aru bụ batrị lx 23A, ihe nnata sitere na lx 9V. Tupu ịtinye batrị ahụ, lelee ha nke ọma ma hụ na ha anaghị agbapụta ma ọ bụ mebie n'ụzọ ndị ọzọ. Fanye batrị dị ka polarity ziri ezi (+ na -). Weghachite mkpuchi ma chekwaa ya.

Ịgbanye oti mkpu na-ata ahụhụ na-agbanye / gbanyụọ: Site na ijide bọtịnụ “ike” na-acha uhie uhie n'akụkụ ala maka nkeji abụọ. Mgbe ole na-agbanye Oti mkpu na-ata ata na-akụ ugboro 3 na LED agba abụọ ahụ na-enwu ugboro atọ. Mgbe ole ịgbanyụ, Oti mkpu na-ata aru na-akụ otu ugboro na LEDs agba abụọ ahụ na-enwu otu ugboro.

Ịtọ ntọala ụda mkpu: Ka agbanyụrụ oti mkpu, jituo bọtịnụ “IKE” na-acha ọbara ọbara maka nkeji ise. Oti mkpu na mbụ na-akụ obere oge ugboro atọ

na mgbe nke anọ ogologo ụda ụda. Mgbe mgbaàmà a gachara, hapụ bọtịnụ "POWER" wee họrọ ụda achọrọ site na ịgbanye mgba ọkụ S. Iji kwado ụda ahọpụtara, gbanyụọ mkpu site na ijide bọtịnụ "IKE" na-acha uhie uhie maka 2 sec.

Na-edozi agba nke diodes: Ka agbanyụrụ oti mkpu, jituo bọtịnụ “IKE” na-acha ọbara ọbara maka nkeji ise. Oti mkpu na mbụ na-ada ụda ugboro atọ ma emezie ụda ụda nke anọ dị ogologo. Mgbe mgbaàmà a gachara, hapụ bọtịnụ “Ike” wee pịa ya obere oge ọzọ. switcher S na-atụgharị na-ahọrọ agba nke diodes chọrọ. Iji kwado agba ahọpụtara, gbanyụọ mkpu site na ijide bọtịnụ “ike” na-acha ọbara ọbara maka nkeji abụọ.

Ọnọdụ LEDs abalị: Site na oti mkpu na-ata ahụhụ, enwere ike ịgbanye / gbanyụọ LEDs site na ịpị bọtịnụ “IKE”.

Na-ejikọta nnata na mkpu ntanye: Ka agbanyụrụ onye nnata ma gbanye ngwaọrụ oti mkpu, jituo ya P bọtịnụ n'akụkụ nke nnata. Tọọ ngbanwe ngbanwe n'otu oge na ọnọdụ ON/aka ekpe. Jidesie ike P bọtịnụ ruo mgbe diode uhie na-acha anụnụ anụnụ na-enwu. Mgbe ọkụ ndị a na-enwu, hapụ ya. Ugbu a, pịa nkenke P bọtịnụ ka ịhọrọ agba achọrọ wee “mee ata ahụ” na oti mkpu na ị chọrọ ijikọ, ya na mpempe akwụkwọ. Iji mezue njikọ ahụ nke ọma, gbanyụọ ma gbanye nnata.

Nnwale nso njikọ: Ka agbanyụrụ oti mkpu, jituo bọtịnụ “IKE” maka nkeji asaa. Oti mkpu na-ebu ụzọ na-ada obere oge 7, mgbe ahụ ụda ụda nke anọ dị ogologo, na-etinye bọtịnụ ahụ ruo mgbe ụda ụda na-aga n'ihu ngwa ngwa na LEDs na-amalite na-egbuke egbuke. Ugbu a ị nwere ike ịpụ na oti mkpu na onye nnata iji chọpụta ebe ọ na-anata akara.

Kaadị akwụkwọ ikike

* debe kaadị a nke ọma maka nkwupụta ọ bụla dị mkpa /

Ụdị: Tọọ Delphin CODER	Ọrụ akwụkwọ ikike mgbe ire ere:
Ụbọchị ịzụrụ: Stamp na mbinye aka nke onye na-ere ere:	Mgbe ọrụ akwụkwọ ikike gasịrị: