Lipontšo tsa data VSLS Variable Speed ​​Limit

Tlhahisoleseding ya Sehlahiswa

• Mohlala: DataSign-VSLS
• Li-LED: Li-LED tse khanyang tse nang le khanya e ikemetseng
• Likarolo: Karete ea SIM bakeng sa ho lekola hole, banka ea betri bakeng sa ts'ebetso e tsoelang pele, maoto a moea bakeng sa botsitso

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho Bea Letšoao
Ha u beha Letšoao, etsa bonnete ba hore liphanele tsa letsatsi li ke ke tsa ba moriting motšehare. Ikopanye le ba boholong sebakeng sa heno pele u beha sebaka.

Ho fihla Sebakeng

1. Phahamisa sekwahelo sa Lebokose la Taolo la VSLS ka ho suthela latch e patiloeng ka ho le letona.
2. Kopanya mariki a park holim'a coupling ea tereilara.
3. Theola lebili la jockey.
4. Theola khokahanyo ea tow 'me u boloke thapo ea tereilara tlas'a raka.
5. Etsolla ketane ea polokeho koloing ebe o lokolla tow coupling.

Drawbar e ka khutlisetsoang

1. Etsa bonnete ba hore maoto a moea a theoha ho thibela ho kokota.
2. Tlosa brake ea mabili le ho hula drawbar.
3. Sireletsa "drawbar" ka ho tsamaisa phini ka mokhoa o nepahetseng.

LBH

P: Ke ntlafatsa melaetsa joang ho VSLS?
A: Tobetsa konopo ea SHOW MESSAGE phanele ea taolo ho hlahisa melaetsa e mecha.

DataSign-VSLS Overview

Sets'oants'o se ka tlase se bonts'a sebaka sa likarolo tseo hangata ho buuoang ka tsona bukeng ena kaofela. Le hoja likarolo tse ling li fetoha ha nako e ntse e ea, likhopolo tse tšoanang lia sebetsa. Likarolo tse ling ke litlatsetso tsa boikhethelo 'me li kanna tsa se ke tsa kenngoa Letšoao la hau.

Ha u beha Letšoao, etsa bonnete ba hore liphanele tsa letsatsi li ke ke tsa ba moriting nakong ea letsatsi. Buisana le lekhotla la lehae kapa balaoli ba litsela pele u beha DataSign-VSLS, ho latela sehlopha sa litsela.

Ha u fihla sebakeng seo…

1. Phahamisa sekwahelo sa Lebokose la Taolo la VSLS ka ho thellela latch e patiloeng ka tlas'a sekwahelo ho ea ka ho le letona.
2. Kopanya mariki a park holim'a coupling ea tereilara.
3. Theola lebili la jockey.
4. Theola khokahanyo ea ho hula. Tlohela sekotwana ho phomola joalo ka ha ho bonts'itsoe.
5. Etsolla thapo ea tereilara 'me u boloke sena tlas'a raka ka har'a lebokose la taolo la VSLS
6. Etsolla ketane ea polokeho koloing 'me u tsokotse lebili la jockey ho lumella khokahanyo ea tow hore e se be le bolo ea koloi.
7. Eketsa matsoho a 4 a tsoang kantle.
8. Theola moea o 4 maotong a tlase.
   Sekhechana sa ho phunya bakeng sa ho theola maoto se boetse se fanoa ka mokotleng oa polasetiki tlas'a shelofo. Ho potlakisa ts'ebetso ena ho ka sebelisoa drill e tsamaisoang ke betri. TLHOKOMELISO: Haeba u sebelisa drÅ(l, e liehe ho qoba ho raha morao ha e fihla pheletsong.
9. Lokolla mariki a Mast.
   TLHOKOMELISO: Ho hloleha ho lokolla mariki a mast ho tla baka tšenyo ho mariki a mast kapa actuator.
   SHEBA hodimo 'me SHEBA SEBAKA HO HLAKILE.
10. Ho Hlophisa Ts'ebetso: Phahamisa Hlooho ea Letšoao u sebelisa Hoist Up Switch ho hlakola bethe le lebokose la taolo le bulehileng sekoahelo.
11. Fetola hlooho ea Letšoao ho shebana le sephethephethe se tlang 'me U LOLA mariki a mast hape.
12. Fepa liketane tsa ts'ireletso ka mabili 'me u kenye liloko
13. Sireletsa lintlha tse ling kaofela tsa linotlolo.

Letshwao le beilwe.
Ka kopo bala karolo e setseng ea tokomane ena ho tloaelana le thepa ena.

Ho qala
Tobetsa konopo ea SHOW MESSAGE ho Panel ea Taolo ea VSLS. Molaetsa o tla hlahisa "DRIVE SAFELY"
E nchafatsoa ho tsoa ho DS-Live kapa molaoli oa lehae kamora sena.

Drawbar e ka khutlisetsoang

Drawbar e ka khutlisoa ho fokotsa sebaka sa maoto fatše ha se seta le ho matlafatsa ts'ireletso ea Trailer.

1. Netefatsa hore maoto a mabeli a ka pele a theoleloang fatše a theotsoe sebakeng se tlase ho thibela ho phunya nako le nako ha "drawbar" e khutlisetsoa morao.
2. Lokolla mariki a lebili. Lebili la jockey le lokela ho ama fatše feela hore ho se ke ha e-ba le khatello e nyolohelang holimo holim'a drawbar; u lokela ho khona ho sisinya drawbar. Sena se tiisa hore phini e khona ho tsamaea ka bolokolohi.
3. Phahamisa pinana 'me u tsamaee ka ho le letona ho ema sebakeng se phahameng, sutumelletsa "drawbar" ka hare ho fihlela hoo e batlang e le tsela eohle, ebe u suthela letsoho la pin ka morao ho le letšehali ebe u sutumelletsa "drawbar" ka ho feletseng, pinana e tla oela hape.
4. Tsamaisa lepina la senotlolo ka har'a borakete ho tšoara le ho tiisa sebakeng seo ka senotlolo.
   Ho atolosa drawbar hape, latela mokhoa o ka holimo ka morao.

Saena Ho theoha le Lipalangoang tse Sireletsehileng tsa Letšoao

Ho bohlokoa hore Letšoao le theohe ka nepo ebe le hokelloa koloing e hulang. Haeba Letšoao le theoha, kotsi e mpe kapa lefu le ka hlaha. Mekhoa e nepahetseng ea ho theola le ho otla e hlalositsoe ka tlase.
Litereilara ha lia lokela ho huloa ka mor'a teraka e nang le 4.5t GVM kapa holimo ntle le "suspension tow hitch/draw bar". Litereilara li etselitsoe ho huloa litseleng tsa sekontiri.

1. Tlosa liketane tsa tšireletso ho tloha ka mabili.
2. Hlakola Brake ea Mast ho theola Hlooho ea Letšoao.
   Hlooho e Tlase ea Letšoao ka har'a bethe ea lipalangoang joalo ka ha ho bonts'itsoe.
3. Theola Hlooho ea Letšoao u sebelisa konopo ea Hoist Down ho VSLS
   Control Panel ka lebokoseng la taolo la VSLS.
4. Ho Koala Fatše: Letšoao le LOKELA ho ba LE HLOKO ha le huloa.
   Senya lets'oao ka ho sebelisa switch ea BLANK SIGN ho Panel ea Taolo ea VSLS.
5. Khutlisetsa Moea fatše Maoto holimo 'me u thelle holim'a li-outrigger mahlakoreng' ohle a mane.
   
   TLHOKOMELISO: Haeba u sebelisa mochini oa ho phunya, o liehe ho qoba ho khutlela morao ha o fihla qetellong.
6. Hula pinana ea selemo 'me u fetole maoto a eang fatše, ho etsa bonnete ba hore pinana ea selemo e khutlela morao ho notlela leoto la winddown sebakeng sa holimo.
7. Sebelisa lebili la Jockey ho theolela tow coupling holim'a bolo ea tow. Netefatsa hore tow coupling e lekana hantle le bolo e hulang ea koloi e hulang. Sena se tšohloa hape bukeng ena.
8. Etsa ketane ea tšireletso.
9. Qetella lebili la jockey 'me u le phahamise ho le beha boemong. Etsa bonnete ba hore lebili la jockey ha le tsamaee hang ha le le sebakeng sa ho hula.
10. Netefatsa hore senotlolo sa ho Khutlisa sekoting sa tow coupling sea lokolloa pele u tsamaea, joalo ka ha ho bonts'itsoe.
11. Tlosa brake ea letsoho haeba sena se ntse se sebetsa.
12. Hokela thapo e hulang polakang ea tereilara le koloing e hulang. Sheba hore mabone a tereilara a sebetsa hantle.
13. Tsamaea ho potoloha Letšoao ho netefatsa hore e se e loketse ho tsamaisoa le hore ha ho mehato e fetotsoeng.
    Lebelo le phahameng le khothalelitsoeng la ho hula ke 80 km/h.

Nahana ka Bophahamo ba Letšoao ha u hula.
Ha u hula Letšoao, marokho le litšitiso tse ling tse tlaase li ka 'na tsa kopana le tsona. Bophahamo ba ho hula: 2300mm.

Sesebelisoa sa betri

Motlakase oa Battery o fumaneha tlas'a raka ka lebokoseng la taolo la VSLS.
Ho tjhaja dibetri, hokela thapo ya motlakase ho matla a 240V Mains.
Ho nka lihora tse ka bang 15 ho tjhaja libeteri ka botlalo ho tsoa boemong bo tlase bo amohelehang ba tefiso. Sesebelisoa sa Pontšo sa Solar Regulator
Solar regulator e lutse ka har'a lebokose la taolo la VSLS, tlasa shelofo. Skrine sa Solar regulator se kentsoe shelofong ka boeona

Haeba taolo ea letsatsi e sa bonahale e le teng, hlahloba fuse ea SOLAR e sebetsa. SOLAR FUSE e ka fumanoa ka letsohong le letšehali la taolo ea letsatsi.
The Amps e tla ba holimo ha solar panel e shebane le Letsatsi, ha boemo ba tjhaji ea Battery bo nyoloha Amps tla fokotseha.
Tlhokomeliso: Chaja ea letsatsi e kanna ea fapana le e bontšitsoeng.

Tataiso ea Tlhokomelo ea VSLS

Li-Solar Array le Libetri

Liphanele tsa letsatsi li sebelisetsoa ho tjhaja betri ea 12V ka sesebelisoa sa solar regulator. Lethathamo la betri le matlafatsa Letšoao. Libetri li nkoa li bataletse ha li fihla ka tlase ho 10.5 V. Hang ha voltage ka libeteri e theoha tjena, Letšoao le tla kena ho Battery Recharge mode 'me pontšo e tla be e se na letho.

Haeba libeteri tsa hau li le tlase

• Netefatsa hore liphanele tsa letsatsi li lula li hloekile ebile ha li na lerōle.
• Etsa bonnete ba hore Letšoao le behiloe e le hore liphanele tsa letsatsi li fumane bonyane lihora tse 6 tsa letsatsi ka letsatsi. Ho seng joalo, li-betri li tla qetella li fokola.

Tow Coupling Tokiso

Fetola khokahanyo ea ho hula hore e lekane hantle holim'a bolo ea koloi e hulang ho ntlafatsa ho palama ha koloi. Australia, tow coupling e etselitsoe ho lekana bolo ea 50mm. Phetoho ena ha e phethoe nakong ea ho etsoa kaha bolo e 'ngoe le e 'ngoe ea tow e ka ba bophara bo fapaneng hanyane ka lebaka la ho roala, kapa lintlha tse ling. Ena ke tataiso feela ka kopo view boitlhaloso qetellong ya tokomane. Ho feta moo, etsa bonnete ba hore towball e bophahamong bo nepahetseng ho hula tereilara.

1. Lokolla nate e notlelang ea 19mm.
2. Etsolla nate e notlellang ho fana ka monyetla.
3. U sebelisa sekoti se nang le hlooho e bataletseng sekoting se ka holim'a phini, reteleha ho fihlela se tiisitsoe, ebe u khoehlisa hanyenyane haholo. Sena se tla hula khokahanyo pele holim'a bolo ea tow le ho e tšoara.
4. Etsa bonnete ba hore o ntse o khona ho hula khokahanyo ntle le boiteko bo boholo, empa ho boloka ho lekana ka thata holim'a bolo ea tow ha e hoketsoe.
5. Tiisa nate e notlelang ka thata.
6. Tlhokomeliso: ha u hula, etsa bonnete ba hore senotlolo se ka morao ha se sebetse. Suthela hole le tsela, joalo ka ha ho bonts'itsoe.

Ho tlosa/Ho tsosolosa Matla a Letshwao

Hakolla matla ho Letšoao bakeng sa polokelo ea nako e telele (e leng nako e telele ho feta khoeli), bakeng sa lipalangoang tsa sebaka se selelele, kapa ha u sebetsa ho Letšoao. Ho hakolla motlakase latela litaelo tse ka tlase.

1. Bula lebokose la taolo la VSLS.
2. Phahamisa sethala ho fihlella boto ea fuse.
3. Ho tlosa matla a Letshwao, ntsha fuse ya SIGN SUPPLY.

TLHOKOMELISO: Haeba ho sebetsa Letšoao bakeng sa ho lokisoa (ke hore, tjheseletsa) hakolla fuse TSOHLE.
Ho busetsa matla a Letshwao, kenya fuse ya SIGN SUPPLY. Suthela fatše ho netefatsa hore e kentsoe hantle.

Lintlha tsa polokelo e ka tlas'a sekhukhu:
Ho kgothaletswa ho boloka ka ntle e le hore dibetri di kgone ho boloka tefiso ka solar array. Haeba u boloka sekoahelo sa Letšoao ka nako e telele (ke hore khoeli e fetang e le 'ngoe), ntša polaka fuse ea SIGN SUPPLY. Ka kopo hlokomela hore libeteri li tla fela ha nako e ntse e ea; ka hona ho kgothaletswa ho kenya tjhaja ya betri. Tiisetso ea betri e felloa ke matla haeba libeteri li lumelletsoe ho tsoa ka botlalo.

Motlakase oa Motlakase - Manual Hand Crank

Sesebelisoa sa motlakase se sebelisetsoa ho phahamisa le ho theola Hlooho ea Letšoao. Ketsahalong ea molumo o tlasetage, libeteri tse sa sebetseng kapa ho hloleha ha actuator, actuator ea motlakase e ka theoleloa ka letsoho.
Lisebelisoa tsa ts'ebeletso bakeng sa ts'ebetso ena ea tlhokomelo li ka rekoa ho Matšoao a Boitsebiso. Likotoana tsa lisebelisoa tsa M5 le M6 Hex li tlameha ho ba bolelele ba 250mm.

1. Motlakase o LOKELA ho khaoha nakong ea ts'ebetso ea ho theola ka letsoho, ntša li-fuse TSOHLE tse fumanoang tlas'a raka ka lebokoseng la taolo la VSLS.
2. Lokolla mariki a Mast.
   Tlatsa tse latelang ka tlas'a chesi ea tereilara.
3. Tlosa sekoahelo sa sekoahelo u sebelisa M5 HEX TOOL BIT ka tlas'a actuator. (e boloke e bolokehile hore u ka e khutlisetsa hape ka mor'a moo)
4. Kenya M6 HEX TOOL BIT ka limilimithara tse 10 ho feta karolo ea khoele ea sekoaelo 'me u qale ho nyenyefatsa actuator HANYANE!Ho seng joalo ho na le kotsi e ka bang teng ea hore motlakase o felisoe ha o ntse o tsoelipana 'me o ka senya actuator.
   
5. Pele o theola ka ho feletseng, etsa bonnete ba hore bethe ea Letšoao e hlophisitsoe ka tsela e bontšitsoeng.
6. Emisa ho tsoelipana ha u theolela botlaaseng.
   TLHOKOMELISO: Ho theola hole haholo ka letsoho ho tla baka tšenyo ea mochini.
7. Ha o qetile, notlela Mast brake.
8. Khutlisetsa sekoahelo morao u sebelisa M5 HEX TOOL BIT ka har'a actuator.
9. Ts'ebeletso e sebetsang ea ho saena ha ho hlokahala

Mabili a Trailer le Wheel Bearings

Kamehla hlahloba khatello ea mabili. Ka nako e ts'oanang hlahloba boemo ba thaere le hore linate tsa mabili li tiile. Likhoeli tse ling le tse ling tse 6-'me ka mor'a likhoeli tse' maloa tsa tšebeliso e-ba le mochine ea tšoanelehang ea hlahlobang likoloi tsa mabili. Tlosa li-bearings tsa mabili likhoeli tse ling le tse ling tse 12 tlas'a maemo a tloaelehileng a ho sebetsa. Hangata bakeng sa tsela e mpe/e thata kapa maemo a ts'ebetso. Ho feta moo, hlahloba ka mor'a hore u tsamaee 1500 km.

Litlhophiso tsa torque bakeng sa linate tsa mabili: 65ibs.ft kapa 90Nm
Likhatello tsa mabili bakeng sa mohlala o mong le o mong oa Letšoao li hlalositsoe ka botlalo holim'a poleiti ea VIN. Netefatsa hore linate tsa mabili li tiisitsoe ho latela lintlha tsa moetsi bakeng sa boholo ba mabili a tereilara ena. Haeba o sa tiisehe, ikopanye le makheniki a sebakeng sa heno. Khatello ea thaere ea 55 PSI e khothalletsoa.

Tlhoekiso e Akaretsang

Karolo e ka pele ea hlooho ea Letšoao (skrine ea poly-carbonate) le tereilara li ka ts'oaroa. Ha ho li-solvents kapa li-thinner tse ka sebelisoang kae kapa kae ho Letšoao.
Karolo e ka morao ea hlooho ea Letšoao e lokela ho ts'oaroa ka hloko kaha ho kenella ha metsi ka lifensetere tsa moea ho ka baka tšenyo ea metsi ho elektronike e ka hare.
Qoba li-louvers tsa fan ha u tšoara hlooho ea Letšoao ka morao, joalo ka ha ho bonts'itsoe.

Lense ea Sensor ea Leseli
Li-sensor tsa leseli (lisele tsa motlakase oa lifoto) li fumaneha ka morao ho hlooho ea Letšoao. Sena se lokela ho bolokoa se hloekile. Bongata ba khanya e kenang lenseng ena e ama boemo ba ho khanya ha Letšoao.

DS-Live™ – E hlophisa lets'oao le hole
Matšoao a Boitsebiso Web-e thehiloeng Sign Programming.

Matšoao a Lintlha DS-Live™
Data Signs DS-Live™ e sebetsa ho bohle web libatli (e ntlafalitsoe hore e sebetse hantle ho Google Chrome le Microsoft Edge). E loketse ka ho fetisisa ho sebetsa ho PC kapa Laptop.
E ka boela ea sebetsa le lisebelisoa tse sa tšoaneng tse tummeng tse kang iPad, Samsung tablet, joalo-joalo, leha ho le joalo skrine e ka 'na ea hloka ho scrolled ho bona lintho tse fapaneng ka lebaka la boholo ba skrine bo fokolang).

K'homphieutha ea VSLS
- Bakeng sa lenaneo la lehae la QuickStart Guide Bakeng sa kopano ena ea matsoho, Letšoao le bolela Matšoao a Melaetsa a feto-fetohang a data kapa VSLS.

K'homphieutha ea VSLS

Bakeng sa kopano ena ea matsoho, Letšoao le bolela Matšoao a Melaetsa a feto-fetohang a data kapa VSLS
VSLS COMPUTER e sebelisoa e le mokhoa oa matsoho oa ho beha moeli oa Lebelo e le karolo ea Australian Standards AS 5156-2010 Letšoao la moeli oa lebelo la elektronike. E rekoa ka boikhethelo ba bareki.
E sebelisoa ho hlophisa, ho beha leihlo le ho thusa ho fetola litlhophiso ho Letšoao la VSLS.

E qalang
Haeba VSLS COMPUTER e hoketsoe empa e sa sebelisoe nako ea metsotso e 2 kapa ho feta, ponts'o le leseli le ka morao la LCD li tla ea STANDBY MODE, ho kenya VSLS COMPUTER bocha, sutumelletsa MENU konopo.

Konopo ea MENUMENU e boetse e sebelisoa ho khutlela sebakeng se tsitsitseng sa ho qala

Haeba likarolo tsa ts'ireletso li kentsoe tšebetsong, VSLS COMPUTER e tla u kopa ho kenya nomoro ea phini ea linomoro tse 4 le ho kena ha VSLS. Sheba karolo ea "Security Settings" ea tataiso ena.
Kamora ho kena skrineng sa ho Qala, Pin le VSLS (haeba e nolofalitsoe), Menu e tla hlahisoa.

Ho theha Molaetsa oa VSLS

Se latelang ke thuto ea mohato ka mohato e hlalosang mokhoa oa ho sebelisa VSLS COMPUTER ho etsa molaetsa le ho o bontša ho Letšoao.

1. Tsamaisa skrineng sa Menu u sebelisa konopo ea le linotlolo ho khetha khetho ea 'Create Message'. Hang ha naleli e le haufi le khetho ea 'Create Message', sutumelletsa KENA konopo.
   Ho theha molaetsa, khetha lebelo kapa Sets'oants'o, Nako ea Frame kapa Setting ea Annulus ka tatellano efe kapa efe ebe o tobetsa konopo E 'NGOE senotlolo sa ho khetha foreime e latelang. Ho ka khethoa liforeimi tse fihlang ho tse 9.
   Tlhokomeliso ea Conspicuity ha e sebetse 'me likonopo li hlokomolohuoe.
   U ka ea morao kapa u ea pele leha molaetsa o sebelisa kapa likonopo.
2. Ho bōptjoa ha molaetsa oa rōna oa pele ho phethahetse.
   Jwale re batla ho bontsha molaetsa E 'NGOE hodima Pontsho.

Sututsa the konopo. Kamora sena, molaetsa o bontshwa letshwaong mme menu e kgolo e hlahiswe hape.
Haeba litšoantšo tse ling, se bonts'itsoeng keyboard sea hlokahala, tobetsa konopo.
Lethathamo la litšoantšo tse ling lia bonts'oa 'me li ka khethoa ho sebelisoa the linotlolo le KENA konopo.

Ho hlophisa Molaetsa

Se latelang ke example ea mokhoa oa ho Rulahanya molaetsa. Tlatsa mehato e latelang ho tsoa skrineng sa MENU.

1. Khetha 'Etsa Molaetsa' 'me u thehe molaetsa oa hau joalo ka leqephe le fetileng.
2. Ka mor'a hore u thehe molaetsa oa hau, tobetsa konopo.
3. Sebelisa likonopo ho lokisa letsatsi le nako.
4. Hang ha seo se entsoe KENA tobetsa konopo ebe o tobetsa konopo
5. Pontšo e tla bontša "molaetsa oa kemiso o sebetsa" ebe o khutlela ho menu e kholo.
   ELA HLOKO: haeba ho na le molaetsa o sebetsang o tla tsoelapele ho sebetsa ho fihlela molaetsa o hlophisitsoeng oo o o rekileng.
6. Sebelisa DS-Live ho hlahloba le ho boloka tlaleho ea molaetsa o reriloeng.

Litlhophiso tsa Tšireletso

Sena se o lumella ho beha Litlhophiso tsa Ts'ireletso lipakeng tsa Khomphutha ea VSLS le Letšoao la VSLS. Sekema sa phasewete sa mekhahlelo e 'meli se fanoa bakeng sa ts'ireletso e phahameng.
Joalo ka Khiboto ea VSLS e sa tsoa rekoa, phini e behiloe ho '0000'. Haeba phini e fetotsoe empa o sa hopole phini e ncha mme e kentsoe ka phoso makhetlo a 5, VSLS COMPUTER e tla u notlela ka ntle le ho hlahisa Khoutu e phephetsang. Ikopanye le DS-Live™ Administrator ea Khampani ea hau ea ka u fang khoutu ea ho seta phini ea VSLS Computer ho khutlela ho 0000.
Hape, joalo ka yuniti e ncha e rekiloeng, lets'oao la VSLS le behiloe ho '123456'

Fetola Pin Setting
O ka fetola phini ea VSLS COMPUTER o sebelisa lethathamo le ka tlase.

Haeba o kgetha HO BUYA, kenya nomoro ya PIN e ntjha le KENA tobetsa konopo, PIN ena e tlameha ho kenngoa nako le nako ha keyboard e buloa. Haeba OFF e khethiloe ha ho hlokahale PIN.

Matshwao a Lintlha a khothaletsa ho siea PIN e lumelletsoe bakeng sa ts'ireletso e kholo le ho thibela batho ba sa lumelloeng ho fetola melaetsa ho Letšoao la hau.

Fetola ho kena ha VSLS
Ena ke sebaka sa bobeli sa ts'ireletso bakeng sa ho lumella melaetsa hore e romelloe ho Letšoao. Haeba sebaka sa ho kena sa VSLS se behiloeng ho VSLS COMPUTER se sa lumellane le ho kena ha VSLS ho Letšoao, joale u ke ke ua khona ho ntlafatsa melaetsa.
Ho seta ho kena ha VSLS ho VSLS COMPUTER, tlatsa mehato e latelang:

1. Kgetha Setting ya Kena.
2. Haeba u khetha ON, kenya nomoro ea ho kena ea linomoro tse 6 ebe o tobetsa konopo. Ho kena hona ho tlameha ho kenngoa nako le nako ha keyboard e buloa. Haeba OFF e khethiloe ha ho hlokahale hore u kene ho eona Hlokomela hore Login e bolokiloe ho lets'oao la VSLS, eseng keyboard ea VSLS, kahoo PIN ke ho fumana monyetla oa ho kena VSLS Keyboard.

Haeba ho se karabo e tsoang ho Letšoao

• Etsa bonnete ba hore Letšoao la hau le buletsoe haeba u batla ho buisana ho tloha ho VSLS Computer ho ea ho Letšoao.
• Puisano ea DS-Live™ e ntse e tsoela pele.
  Ho kena ho VSLS ho fosahetseng. Sheba karolo ea Litlhophiso tsa Tšireletso.
• Netefatsa hore karete ea SD e kentsoe ka nepo

© 2024 Data Signs Pty Ltd. Litokelo tsohle li sirelelitsoe | HA E LAOLE HA E printa | MAN 010AE Khatiso ea 2 | Rev: 21-10-2024

Litokomane / Lisebelisoa

Lipontšo tsa data VSLS Variable Speed ​​Limit [pdf] Buka ea Taelo VSLS Variable Speed ​​Limit, VSLS Variable Speed ​​Limit, Variable Speed ​​Limit, Speed ​​Limit, Limit

Litšupiso

• Bukana ea Mosebelisi