HO ETSA MOKHOABI
PHELELA MOKHOA
MOQEBI NETE
Tataiso ea Moralo
VLT® Soft Starter - MCD 100
MCD 100 VLT Soft Starter
Tsohle ka MCD 100
Tataiso ea Moqapi oa MCD 100
1.1.1 Selelekela
Li-starter tsa MCD 100 tse bonolo li etselitsoe ho qala le ho emisa li-motors tsa 3 phase ac, kahoo li fokotsa matla a ho phalla le ho felisa liphello tse senyang tsa ho qala ho phahama ha torque.
Starter e bonolo e laoloang ka dijithale e na le litlhophiso tse nepahetseng le ho kenya habonolo. Mookameli o na le linako tsa ho potlakisa le ho fokotsa lebelo ka bomong.
Ka lebaka la torque ea pele e feto-fetohang le ts'ebetso e ikhethang ea ho arohana (kick start) starter e bonolo e ka ntlafatsoa bakeng sa ts'ebeliso efe kapa efe.
Li-starter tse bonolo tsa MCD 100 hangata li sebelisoa lits'ebetsong tsa makoloi moo palo e boreleli le/kapa ho emisa e leng advan.tageous, joalo ka li-conveyors, li-fan, lipompo, li-compressor le meroalo e phahameng ea inertia. Li-starter tse bonolo tsa MCD 100 li boetse li totobetse e le sebaka sa linaleli / delta starters.
1.1.2 Likarolo
- Boholo ba boima ba motlakase. 25 A
- Linako tsa ho potlakisa lia fetoha: 0-10 metsotsoana
- Linako tsa deceleration lia fetoha: 0-10 metsotsoana
- Torque ea pele e ka fetoloa ho fihla ho 85%
- Ts'ebetso ea Breakaway (ho qala ho raha)
- Universal control voltage: 24 - 480 V AC / DC
- Ho lemoha ka tsela e iketsang ea mekhahlelo e sieo
- Ho ikamahanya le maemo ho 50/60 Hz
- Pontšo ea Boemo ba LED
- Ts'ebetso e sa lekanyetsoang ea ho qala / emisa ka hora (15A & 25A)
- E hahiloe ka har'a tšireletso ea varistor
- Moqapi o kopaneng oa modular
- DIN seporo mountable
- CE (EN 60947-4-2)
- CULUS (UL 508)
1.1.3 Liphetoho
Setšoantšo sa 1.1
1.1.4 Tataiso ea Khetho
| Mofuta | Max. matla | Max. FLC | Moqtage | DD khoutu ea taelo |
| MCD 100-001 | 0,75 kW | 3 A | 208 - 240 V | 175G4000 |
| MCD 100-001 | 1,5 kW | 3 A | 400 - 415 V | 175G4001 |
| MCD 100-001 | 1,5 kW | 3 A | 440 - 480 V | 175G4002 |
| MCD 100-001 | 2,2 kW | 3 A | 550 - 600 V | 175G4003 |
| MCD 100-007 | 4 kW | 15 A | 208 - 240 V | 175G4004 |
| MCD 100-007 | 7,5 kW | 15 A | 400 - 480 V | 175G4005 |
| MCD 100-007 | 7,5 kW | 15 A | 500 - 600 V | 175G4006 |
| MCD 100-011 | 7,5 kW | 25 A | 208 - 240 V | 175G4007 |
| MCD 100-011 | 11 kW | 25 A | 400 - 480 V | 175G4008 |
| MCD 100-011 | 15 kW | 25 A | 500 - 600 V | 175G4009 |
Lethathamo la 1.1
Lintlha tsa Tekheniki
| Litlhaloso tsa sephetho | MCD 100 - 001 | MCD 100 - 007 | MCD 100 - 011 |
| Ts'ebetso ea hona joale boholo. | 3A | 15A | 25A |
| Boholo ba koloi ho: 208 - 240 V AC 400 - 480 V AC 550 - 600 V AC |
0.1-0.75 kW (0.18-1 HP) 0.1-1.5 kW (0.18-2 HP) 0.1-2.2 kW (0.18-3 HP) |
0.1-4.0 kW (0.18-5.5 HP) 0.1-7.5 kW (0.18-10 HP) 0.1-7.5 kW (0.18-10 HP) |
0.1-7.5 kW (0.18-10 HP) 0.1-11 kW (0.18-15 HP) 0.1-15 kW (0.18-20 HP) |
| Leakage current max. | 5 mA | ||
| Min. ts'ebetso ea hona joale | 50 mA | ||
| Lintlha: AC-53a Asynchronous motors AC-53b Asynchronous motors tse nang le bypass AC-58a Hermetic sehatsetsi compressors |
– 3A : AC-53b : 4-10 : 110 – |
15A : AC-53a : 8-3 :100 - 3000 – 15A : AC-58a : 6-6 : 100 - 3000 |
25A : AC-53a : 8-3 : 100-3000 – 25A : AC-58a : 6-6 : 100-3000 |
Lethathamo la 1.2
| Laola Litlhaloso tsa Potoloho | |
| Taolo voltagmatla, 230 V | 24-230 V |
| Taolo voltagmefuta ea eona, 400-600 V | 24 - 480 V AC / DC |
| Pick-Up voltagle max. | 20.4 V AC / DC |
| Ho tlohela sekolo voltage min. | 5 V AC / DC |
| Max. laola hona joale bakeng sa ho se sebetse | 1 mA |
| Laola hona joale / Matla a maholo. | 15 mA / 2 VA |
| Nako ea karabo max. | 70 ms |
| Ramp- nako ea ho qetela | Fetola. ho tloha ka metsotsoana e 0-10. |
| Ramp- nako ea ho theoha | Fetola. ho tloha ka metsotsoana e 0-10. |
| Torque ea pele | Fetosa ho tloha ho 0-85% ea torque ea lebitso ka boikhethelo, Kick start. |
| Ho itšireletsa mafung le ho tsoa ha EMC | E kopana le litlhoko tsa EN 60947-4-2 |
Lethathamo la 1.3
| Insulation | |
| Rated insulation Voltage, ue | 660 V AC |
| E lekantsoeng ho mamella Voltage, umpe | 4 kV |
| Sehlopha sa Tlhophiso | III |
Lethathamo la 1.4
| Thermal tobileng | MCD 100 - 001 | MCD 100 - 007 | MCD 100 - 011 |
| Ts'ebetso e tsoelang pele ea ho felloa ke matla ka matla.: | 4W | 2W/A | |
| Mosebetsi oa nakoana oa ho felloa ke matla. | 4W | 2W/A x Potoloho ea mosebetsi | |
| Boemo ba mocheso o tikolohong | -5 ° C ho isa ho 40 ° C | ||
| Mokhoa oa ho pholisa | Tlhahiso ea tlhaho | ||
| Ho phahamisa | E otlolohileng +/- 30° | ||
| Max. mocheso o phelang o nang le tekanyo e lekanyelitsoeng | 60°C, bona derating bakeng sa mocheso o phahameng serapeng Ho sebetsa at Phahameng Mocheso. | ||
| Tempele ea polokelo. mefuta | -20°C ho isa ho 80°C | ||
| Tekanyo ea tšireletso / tekanyo ea tšilafalo | IP 20 / 3 | ||
Lethathamo la 1.5
| Lisebelisoa | |
| Matlo | PPO UL94V1 e itimang matla |
| Ho oela ha mocheso | Aluminium e ntšo e nang le anodized |
| Motheo | Tšepe ea motlakase |
Lethathamo la 1.6
Setšoantšo se Sebetsang sa 1.3.1
ExampLe 1:
Ho qala ho bonolo le ho emisa ha bonolo
ExampLe 2:
Qala e bonolo ka ho raha le ho emisa ha bonolo Qala e bonolo
Lethathamo la 1.7
1.3.2 Tlhaloso ea Ts'ebetso
Ramp up
Nakong ea ramp-ho fihlela molaoli o tla eketsa butle-butle molumotage ho enjene ho fihlela e fihla moleng o felletseng voltage. Lebelo la enjene le tla ipapisa le mojaro oa 'nete ho shaft ea motor. Enjene e nang le moroalo o monyane kapa e se nang letho e tla fihla ka lebelo le felletseng pele ho molumotage fihletse boleng ba eona bo phahameng. Ea sebele ramp nako e baloa ka mokhoa oa dijithale 'me e ke ke ea susumetsoa ke litlhophiso tse ling, maqhubu a marang-rang kapa phapano ea mojaro.
Torque ea pele
Torque ea pele e sebelisetsoa ho beha molumo oa pele oa ho qalatage.
Ka tsela ena hoa khoneha ho fetola molaoli ho kopo e hlokang torque e phahameng ea ho qala. Ka linako tse ling kopo e tla hloka torque e phahameng ea khefu.
Mona, boemo ba torque ea pele bo ka kopanngoa le ts'ebetso ea ho qala ho raha. Ho qala ho raha ke nako ea 200 ms moo enjine e fumanang molumo o felletsengtage.
Setopo se bonolo
Nakong ea ramp-down the controller e tla fokotsa butle butletage ho enjene kahoo fokotsa torque le hona joale. Ka lebaka leo, lebelo la enjene le tla tima.
Karolo e bonolo ea ho emisa ke advantagEous ho qoba ho hamore ha metsi le cavitation holim'a lipompo, le ho qoba thepa e thekeselang holim'a conveyors.
1.3.3 Letšoao la Boemo ba LED
1.3.4 Ho kenya mohala
Setšoantšo sa 1.2 MCD 100 - 007 / MCD 100 - 011
1.3.5 Liphetoho
MCD 100 e fana ka Nako ea Moqtage Ramp holimo. Sena se bolela hore motlakase oa voltage butle-butle ramped up to full line voltage ho latela nako e behiloeng ke switch ea rotary.
Ho qoba tšenyo e bonolo ea ho qala, litlhophiso tse nepahetseng tsa boemo ba torque ea pele le ramp nako ea ho qetela e tlameha ho nahanoa. Ho bohlokoa ho etsa bonnete ba hore enjene e potlakisoa ka lebelo le felletseng pele sebatli se bonolo se sebetsa ka botlalo.
Ho beha boemo ba torque ea pele:
- Beha ramp up time to max.
- Beha phetoho ea torque ea pele ho min.
- Kenya lets'oao la taolo metsotsoana e seng mekae. Haeba enjene e sa potolohe hang-hang eketsa boemo ba torque ea pele ka mohato ebe o leka hape.
Pheta ho fihlela motlakase o qala ho potoloha hang ka mor'a hore letšoao la taolo le sebelisoe.
Ho beha ramp nako ea ho qetela:
- Beha ramp up time to max.
- Fokotsa ramp nako ho fihlela ts'ebetso ea mochini e bonoa.
- Eketsa ramp nako ka mohato o le mong.
1.3.6 Li-Fuse le tšireletso ea potoloho e khutšoanyane
Haeba ho e-na le lipotoloho tse khutšoanyane, li-fuse tse tloaelehileng li ka sebelisoa ho sireletsa ho kenya - empa eseng ho qala ka bonolo. Lethathamo le latelang le thathamisa lintlha tsa khetho ea li-fuse tse tloaelehileng.
| MCD 100-001 | Tshireletso max 25 A gL/gG |
| MCD 100-007 | Tshireletso max 50 A gL/gG |
| MCD 100-011 | Tshireletso max 80 A gL/gG |
Lethathamo la 1.9
Li-fuse tsa semiconductor li ka sebelisoa le li-controller tse bonolo tsa MCD 100. Tšebeliso ea li-fuse tsa semiconductor e tla sireletsa SCR's haeba ho e-na le li-circuits tse khutšoanyane le ho fokotsa monyetla oa tšenyo ea SCR ka lebaka la maqhubu a mangata a nakoana. Ha u khetha li-fuse tsa semiconductor etsa bonnete ba hore fuse e na le tekanyo e tlase ea ho hlakola I2 t ho feta SCR (sheba lintlha tse tafoleng e latelang), le hore fuse e ka tsamaisa nako ea ho qala bakeng sa nako ea sebele ea ho qala.
| Setšoantšo sa MCD100 | SCR I2t (A2s) |
| MCD 100-001 | 72 |
| MCD 100-007 | 1800 |
| MCD 100-011 | 6300 |
Lethathamo la 1.10
1.3.7 Litekanyo
1.3.8 Ho sebetsa ka Mocheso o Phahameng
| Mocheso oa tikoloho | Nako e tsoelang pele | ||
| MCD 100 - 001 | MCD 100 - 007 | MCD 100 - 011 | |
| 40°C | 3 A | 15 A | 25 A |
| 50°C | 2.5A* | 12.5 A | 20 A |
| 60°C | 2.0A* | 10 A | 17 A |
Lethathamo la 1.11
* Bonyane 10 mm lehlakoreng tumello pakeng tsa lihlahisoa
| Mocheso oa tikoloho | Boemo ba nako ea mosebetsi (15 min. max. ka nako) | |
| MCD 100 - 007 | MCD 100 - 011 | |
| 40°C | 15 A (100 %-duty-cycle) | 25 A (100 %-duty-cycle) |
| 50°C | 15 A (80 %-duty-cycle) | 25 A (80 %-duty-cycle) |
| 60°C | 15 A (65 %-duty-cycle) | 25 A (65 %-duty-cycle) |
Lethathamo la 1.12
1.3.9 Tšireletso e Fetang Mocheso
Haeba ho hlokahala selaoli se ka sireletsoa khahlanong le mocheso o feteletseng ka ho kenya thermostat sekoting se ka letsohong le letona la molaoli.
Taelo: UP 62 thermostat 037N0050
Ho itšetlehile ka kopo ea thermostat e ka hokahanngoa letotong le potoloho ea taolo ea contactor ka sehloohong. Ha mocheso oa sinki ea mocheso o feta 90 ° C sekontiri se seholo se tla tima. Ho tsosolosa ka letsoho hoa hlokahala ho qala potoloho ena hape.
Bakeng sa dikgokelo tsa methapo sheba 1.4 Tshebediso Examples.
1.3.10 Litaelo tsa ho Hloma
Selaoli se etselitsoe ho beha holimo. Haeba molaoli o kentsoe ka holimo, moroalo o tlameha ho fokotsoa ka 50%.
Mookameli ha a hloke tumello ea lehlakore.
Sebaka pakeng tsa lilaoli tse peli tse theohileng li tlameha ho ba bonyane 80 mm (3.15").
Ho hlaka pakeng tsa selaoli le mabota a holimo le a tlase e tlameha ho ba bonyane 30 mm (1.2").
Kopo Examples
1.4.1 Tšireletso ea mocheso o feteletseng
Example 1
The thermostat e ka kopanngoa ka letoto ka kenyelletso ea taolo ea se qalang se bonolo. Ha thempereichara ea sinki ea mocheso e feta 90°C se qalang se bonolo se tla tima.
HLOKOMELA
Ha mocheso o theohile hoo e ka bang 30°C, molaoli o tla buloa hape ka bohona. Sena ha se amohelehe lits'ebetsong tse ling.
Example 2
Thermostat e hokahane ka letoto le potoloho ea taolo ea contactor ka sehloohong. Ha mocheso oa sinki ea mocheso o feta 90 ° C sekontiri se seholo se tla tima. Potoloho ena e hloka reset ea letsoho ho qala enjene bocha.
1.4.2 Qala e Bonolo e Laolehileng
Ha konteraka C1 e fetisetsoa ho ON-State, starter e bonolo e tla qala motlakase, ho latela litlhophiso tsa R.amp- nako ea ho qetela le liphetoho tsa pele tsa torque.
Ha contactor C1 e fapoha ho OFF-State, enjene tla tima hang-hang.
A kopo ena contactor tla ba le ha ho mojaro nakong ho etsa tshebetso. The contactor tla jara le senya ka lebitso la motlakase hona joale.
1.4.3 Input Controlled Soft Start
Ha taolo voltage e sebelisoa ho A1 - A2, Starter e bonolo ea MCD e tla qala enjene, ho latela litlhophiso tsa R.amp- nako ea ho qetela le liphetoho tsa pele tsa torque.
Ha taolo voltage e emisitsoe, enjene e tla emisoa habonolo ho latela litlhophiso tsa Rampliphetoho tsa nako e tlase.
Ho tima hang-hang, seta Ramp- nako e tlase ho isa ho 0.
Danfoss e ke ke ea amohela boikarabello bakeng sa liphoso tse ka bang teng libukeng tsa libuka, libukana le lintho tse ling tse hatisitsoeng. Danfoss e na le tokelo ea ho fetola lihlahisoa tsa eona ntle le tsebiso. Sena se sebetsa le ho lihlahisoa tse seng li ntse li le teng ka taelo ha feela liphetoho tse joalo li ka etsoa ntle le liphetoho tse latelang tse hlokahalang ho latela litlhaloso tse seng li lumellane.
Matšoao ohle a thepa ena ke thepa ea lik'hamphani tse amehang.
Danfoss le mofuta oa logo ea Danfoss ke matšoao a khoebo a Danfoss A/S. Litokelo tsohle li sirelelitsoe.
MG12A202 - VLT®
ke lets'oao la khoebo le ngolisitsoeng 
www.danfoss.com/drives
175R0997
MG12A202
MG12A202
Litokomane / Lisebelisoa
 |
Danfoss MCD 100 VLT Soft Starter [pdf] Bukana ea Mosebelisi MCD 100-001, MCD 100-007, MCD 100-011, MCD 100 VLT Soft Starter, MCD 100, VLT Soft Starter, Soft Starter, Starter |