Danfoss BOCK HGX34e 2 Pole Hg Compressors

Tlhahisoleseding ya Sehlahiswa

Sehlahisoa seo ho buuoang ka sona ke compressor ea sehatsetsi e entsoeng ke Bock. E fumaneha ka mefuta e mengata: HGX34e/255-2, HGX34e/315-2, HGX34e/315-2 S, le HGX34e/380-2. Sehlahisoa se tla le tataiso ea ts'ebetso le phetolelo ea litaelo tsa mantlha.

Mabapi le litaelo tsena:
Litaelo tsena li lokela ho baloa pele li kopanya le ho sebelisa compressor ho qoba ho se utloisisane le ho thibela tšenyo. Kopano le tšebeliso e fosahetseng li ka baka kotsi e tebileng kapa e bolaeang. Litaelo tsa polokeho tse fanoeng litaelong tsena li tlameha ho lateloa. Litaelo li lokela ho fetisetsoa ho bareki ba ho qetela hammoho le unit ea compressor.

Litaba:

• Litaelo tsa polokeho
• Lintlha tsa khokahano ea motlakase
• Litaelo tsa ho laela
• Tataiso ea tlhokomelo
• Lintlha tsa tekheniki
• Litekanyo le likhokahano
• Phatlalatso ea ho kenyeletsoa

Polokeho

Ho khetholla litaelo tsa polokeho:

• KOTSI: E bontša boemo bo kotsi bo ka bakang kotsi e bolaeang hang-hang kapa e tebileng.
• TLHOKOMELISO: E bontša boemo bo kotsi bo ka bakang kotsi e bolaeang kapa e mpe.
• TLHOKOMELISO: E supa boemo bo kotsi bo ka bakang kotsi e mpe kapa e nyane.
• HLOKOMELA: E bontša boemo bo ka bakang tšenyo ea thepa.
• INFO: E fana ka lintlha tsa bohlokoa kapa malebela mabapi le ho nolofatsa mosebetsi.

Litšoaneleho tse hlokahalang ho basebetsi:
Ho sebetsa ka li-compressor ho hloka basebetsi ba tšoanelehang ho sebetsa lits'ebetsong tsa lihatsetsi tse hatelitsoeng. Sena se kenyelletsa lienjiniere le litsebi tse nang le koetliso e tšoanang tse khonang ho kopanya, ho kenya, ho hlokomela le ho lokisa litsi tsa sehatsetsi le li-air-conditioning. Basebetsi ba tlameha ho tseba ho lekola mosebetsi le ho lemoha likotsi tse ka bang teng.

Litaelo tse akaretsang tsa polokeho:
Li-compressor tsa sehatsetsing ke mechini e hatelletsoeng 'me li hloka tlhokomeliso le tlhokomelo nakong ea ts'ebetso. Khatello e phahameng ka ho fetesisa e lumelletsoeng ha ea lokela ho fetisoa, esita le molemong oa liteko.

Tšebeliso e reriloeng:
Compressor ha ea lokela ho sebelisoa libakeng tse ka bang kotsi. Litaelo tsena tsa kopano li hlalosa mofuta o tloaelehileng oa compressor e entsoeng ke Bock mme e reretsoe ho kenngoa mochining.

Litaelo tsa Tšebeliso ea Sehlahisoa:

Latela litaelo tsena bakeng sa tšebeliso e nepahetseng ea compressor ea sehatsetsing:

Ho laela:

1. Etsa litokisetso tse hlokahalang bakeng sa ho qala.
2. Etsa teko ea matla a khatello ho netefatsa botšepehi ba compressor.
3. Etsa tlhahlobo ea ho lutla ho bona hore na ha ho na ho lutla ha sehatsetsing.
4. Qetella mokhoa oa ho falla.
5. Kenya chelete e hlokahalang ea tefiso ea sehatsetsing.
6. Qala compressor.
7. Qoba ho slugging nakong ea ts'ebetso.

Tlhokomelo:

1. Lokisetsa mesebetsi ea tlhokomelo.
2. Etsa mosebetsi o hlokahalang joalokaha ho boletsoe.
3. Sheba likarolo tse ling tse khothaletsoang le lisebelisoa bakeng sa ho nchafatsa.
4. Sebelisa mafura a khothalletsoang kapa oli bakeng sa tlhokomelo.
5. Latela mokhoa oa ho tlosa mosebetsi ha ho hlokahala.

Hlokomela: Bakeng sa lintlha tse qaqileng tsa tekheniki, boholo, likhokahano, le phatlalatso ea kenyeletso, ka kopo sheba buka ea mosebelisi.

Polokeho

	KOTSI	E supa boemo bo kotsi boo, ha bo sa qojoe, bo tla baka kotsi e bolaeang kapa e mpe hanghang.
	TLHOKOMELO	E supa boemo bo kotsi boo, ha bo sa qojoe, bo ka bakang kotsi e mpe kapa e mpe.
	TLHOKOMELO	E supa boemo bo kotsi boo, ha bo sa qojoe, bo ka bakang kotsi e mpe kapa e nyane.
	TLHOKOMELO	E supa boemo boo, ha bo sa qojoe, bo ka bakang tšenyo ea thepa.
	TSEBISO	Lintlha tsa bohlokoa kapa malebela a ho nolofatsa mosebetsi.

Litšoaneleho tse hlokahalang ho basebetsi

	TLHOKOMELO	Basebeletsi ba sa rutehang ka mokhoa o lekaneng ba baka kotsi ea likotsi, phello e ba kotsi e mpe kapa e bolaeang. Ka hona, mosebetsi oa li-compressor o boloketsoe basebetsi ba tšoanelehang ho sebetsa lits'ebetsong tsa sehatsetsi tse hatelletsoeng: Bakeng sa mohlalaample, setsebi sa lihatsetsi, moenjiniere oa mechine ea lihatsetsi. Hape le liporofeshene tse nang le lithupelo tse bapisoang, tse nolofalletsang basebetsi ho bokella, ho kenya, ho hlokomela le ho lokisa litsi tsa sehatsetsi le li-air-conditioning. Basebeletsi ba tlameha ho khona ho lekola mosebetsi o lokelang ho etsoa le ho lemoha likotsi tse ka bang teng.
	TLHOKOMELO	Kotsi ea likotsi. Li-compressor tsa sehatsetsing ke mechini e hatelletsoeng ka matla, ka hona, li hloka tlhokomeliso e matla le tlhokomelo ha li sebetsoa. Khatello e phahameng e lumelletsoeng ha ea lokela ho fetisoa, leha e le ka mabaka a tlhahlobo.Kotsi ea ho cha! Ho itšetlehile ka maemo a ts'ebetso, mocheso oa holim'a metsi o fetang 60 ° C ka lehlakoreng la ho tsoa kapa o ka tlase ho 0 ° C ka lehlakoreng la ho monya o ka finyelloa. Qoba ho kopana le sehatsetsi hakaalo. Ho kopana le sehatsetsing ho ka baka ho chesa ho matla le ho senyeha ha letlalo.

Tšebeliso e reriloeng

TLHOKOMELO

Compressor e kanna ea se sebelisoe libakeng tse ka bang le ho phatloha!

Litaelo tsena tsa kopano li hlalosa mofuta o tloaelehileng oa compressor e boletsoeng sehloohong se entsoeng ke Bock. Li-compressor tsa sehatsetsi sa Bock li reretsoe ho kenngoa mochining (ka har'a EU ho latela Melao ea EU 2006/42/EC Machinery Directive le 2014/68/EU Pres-sure Equipment Directive).
Ho romelloa ho lumelloa feela haeba compressor e kentsoe ho latela litaelo tsena tsa kopano 'me tsamaiso eohle eo e kopantsoeng ho eona e hlahlobiloe le ho amoheloa ho latela melao ea molao.
Li-compressor li etselitsoe ho sebelisoa lits'ebetsong tsa sehatsetsi ho latela meeli ea ts'ebeliso.
Ke feela sehatsetsi se boletsoeng litaelong tsena se ka sebelisoang.
Tšebeliso efe kapa efe e 'ngoe ea compressor e thibetsoe!

Tlhaloso ea Sehlahisoa

Tlhaloso e khutšoanyane

• Semi-hermetic four-cylinder reciprocating compressor e nang le lubrication ea pompo ea oli.
• Ho ikhethela ka moralo o bobebe oa aluminium
• Enjene ea ho hula khase e pholileng

Litekanyo le boleng ba khokahano li ka fumanoa Khaolong ea 9

 Letlapa la mabitso (mohlalaample)

1. Tlhaloso ea mofuta
2. Nomoro ea mochini
3. boholo ba hajoale bo sebetsang
4. E qala hona joale (rotor e thibetsoe)
5. ND (LP): max. tshebetso e dumelletsoeng
6. Moqtage, potoloho, maqhubu
7. Lebelo la ho potoloha ka lebitso
8. Ho falla
9. Mofuta oa oli o tlatsitsoeng fekthering
10. Khatello ea mofuta oa tšireletso ea lebokose la terminal (g) Lehlakoreng la khatello e tlase HD (HP): max. khatello ea tšebetso e lumelletsoeng (g) Lehlakore la khatello e phahameng

Ela hloko meeli ea lits'oants'o tsa ts'ebeliso!

Lisebelisoa tsa motlakase li ka fetola sehlopha sa ts'ireletso ea IP!

Tlanya senotlolo (mohlalaample)

• HG - Hermetic Gas-Cooled (e monyang khase-e pholileng)
• X - Tefiso ea oli ea Ester
• S - Enjene e matla haholoanyane, mohlala, lisebelisoa tsa moea o fehlang moea

Libaka tsa kopo

Lihatsetsi

• HFKW / HFC: R134a, R407C

Tefiso ea oli
Li-compressor li tlatsitsoe ke feme ka mefuta e latelang ea oli:

• BOCK lub E55

Li-compressor tse nang le tefiso ea oli ea ester (BOCK lub E55) li tšoailoe ka X ka mofuta oa mofuta (mohlala, HGX34P/380-2 A).

TSEBISO		Bakeng sa ho tlatsa, re khothaletsa mefuta e ka holimo ea oli. Mekhoa e meng: sheba khaolo ea 7.4
			TLHOKOMELO	Boemo ba oli bo tlameha ho ba ka holimo. karolo e bonahalang ea khalase ea pono; Tšenyo ea konpressor ke boemo ba oli bo ka khonehang haeba bo tletse kapa bo le tlase. tlatsitsoe

Meeli ea kopo
TLHOKOMELO Ts'ebetso ea compressor e ka khoneha ka har'a meeli ea ts'ebetso.
Tsena li ka fumaneha ho sesebelisoa sa khetho sa Bock compressor (VAP) tlasa vap.bock.de. Ela hloko lintlha tse fanoeng moo.

• Mocheso o lumelletsoeng oa tikoloho (-20°C) - (+60°C)
• Max. mocheso o lumellehang oa ho qetela oa 140°C.
• Max. lumello ea ho fetola maqhubu a 8x / h.
• Nako e fokolang ea ho sebetsa ke 3 min. boemo bo tsitsitseng (ts'ebetso e tsoelang pele) e tlameha ho finyelloa.
  Bakeng sa ts'ebetso e nang le taolo ea bokhoni:
• Ts'ebetso e tsoelang pele, ha taolo ea matla e sebetsa, ha e lumelloe mme e ka baka tšenyo ho compressor.
• Mocheso oa mocheso o matla oa khase o ka hloka ho fokotsoa kapa o behoe ka bonngoe ha o sebetsa haufi le monyako.
• Ha matla a taolo a sebetsa, lebelo la khase tsamaisong ha le khone ho netefatsa hore oli e lekaneng e khutlisetsoa ho compressor tlas'a maemo a itseng.

Bakeng sa ts'ebetso e nang le frequency converter:

• Laola mefuta e fapaneng ea konpresser 15 - 50 Hz (K Design 15 - 60 Hz).
• Tšebeliso e phahameng ea hona joale le ea matla ha ea lokela ho fetisoa. Tabeng ea ts'ebetso ka holim'a maqhubu a motlakase, moeli oa kopo o ka fokotsoa
• Sebelisa thermostat e sireletsang mocheso.
• Ho khutlisa oli ka maqhubu a tlase a tlameha ho fanoa.
  Ha o sebetsa sebakeng sa vacuum, ho na le kotsi ea hore moea o kene ka lehlakoreng la ho hula. Sena se ka baka liphetoho tsa lik'hemik'hale, ho phahama ha khatello ka har'a condenser le mocheso o phahameng oa khase. Thibela ho kena ha moea ka litšenyehelo tsohle!

Libaka tsa kopo

Max. khatello e lumelletsoeng ea ho sebetsa (LP/HP)1):
19/28 bar

1. LP = Khatello e tlaase
   HP = Khatello e phahameng

Kopano ea Compressor

TSEBISO
Li-compressor tse ncha li tlatsitsoe ke fektheri ka khase ea inert.
Tlohela tefiso ena ea tšebeletso ka har'a compressor nako e telele kamoo ho ka khonehang 'me u thibele ho kena ha moea. Sheba sekontiri bakeng sa tšenyo ea lipalangoang pele u qala mosebetsi ofe kapa ofe.

Polokelo le lipalangoang

• Ho boloka ho (-30°C) - (+70°C), mongobo o phahameng o lumellehang o lekanyelitsoeng 10% - 95%, ha ho condensation
  Se boloke sebakeng se senyang, se lerole, se nang le mouoane kapa sebakeng se chang.
  
• Sebelisa leihlo la lipalangoang. U se ke ua phahamisa ka letsoho!
• Sebelisa lisebelisoa tsa ho phahamisa!

Ho beha

TLHOKOMELO Li-fittings (mohlala, li-pipe, li-unit tse eketsehileng, likarolo tse ntseng li eketseha joalo-joalo) holim'a compressor ha lia lumelloa!

• Fana ka tumello e lekaneng bakeng sa mosebetsi oa tlhokomelo.
• Etsa bonnete ba hore ho na le moea o lekaneng oa compressor.

• Se sebelise sebakeng se senyang, se lerole, damp sepakapaka kapa tikoloho e chang.

• Seta holim'a bokaholimo bo lekanang kapa matla a ho beha foreime.
• Compressor e le 'ngoe ka ho khetheha ho vibrate damper.
• Li-circuits tsa Duplex le tse tšoanang li lula li le thata.

• Tšireletso ea letsatsi: Haeba compressor e behiloe ka ntle, e tlameha ho sireletsoa letsatsing le tobileng.

Boholo bo lumelletsoeng tšekamelo

• HLOKOMELA: Mafutsana lubrication ka compressor. Hlompha litekanyetso tse boletsoeng

Lihokelo tsa liphaephe

TLHOKOMELO Tšenyo e ka bang teng.
U se ke ua solder ha feela compressor e ntse e le tlas'a khatello. Ho chesa haholo ho ka senya valve.
Ka hona, tlosa litšehetso tsa liphaephe ho tloha ho valve bakeng sa solder, 'me ka hona u pholile 'mele oa valve nakong le ka mor'a ho soasoa. Ke solder feela e sebelisang khase ea inert ho thibela lihlahisoa tsa oxidation (sekala).

• Lihokelo tsa liphaephe li felletse ka hare ho bophara e le hore liphaephe tse nang le limilimithara tse tloaelehileng le boholo ba lisenthimithara li ka sebelisoa.
• Li-diameter tsa khokahanyo tsa li-valve tse koalang li lekantsoe bakeng sa tlhahiso e phahameng ea compressor. Karolo ea 'nete e hlokahalang ea phaephe ea sefapano e tlameha ho bapisoa le tlhahiso. Ho joalo le ka li-valve tse sa khutleng.

Liphaephe

• Liphaephe le likarolo tsa tsamaiso li tlameha ho hloeka le ho omella ka hare le ho se be le sekala, sekoti le lihlopha tsa mafome le phosphate. Sebelisa likarolo tse thibelang moea feela.
• Beha lipeipi ka nepo. Li- compensation tse loketseng tsa vibrate li tlameha ho fanoa ho thibela liphaephe hore li phatlohe le ho robeha ke ho thothomela ho matla.
• Etsa bonnete ba ho khutlisa oli e nepahetseng.
• Boloka tahlehelo ea khatello ho bonyane bo felletseng.

Ho beha methapo ea ho hula le ea khatello
TLHOKOMELO Liphaephe tse kentsoeng ka tsela e fosahetseng li ka baka mapetsong le ho lla, phello e ba ho lahleheloa ke sehatsetsing.
TSEBISO Peakanyo e nepahetseng ya mela e hulang le ya ho ntsha ka ho toba ka mora hore compressor e be karolo ya tshebetso e thellang le boitshwaro ba ho thothomela.
Molao oa letsoho: Kamehla beha karolo ea pele ea lipeipi ho tloha ho belofo e koalang ho ea tlase le e bapileng le shaft ea koloi.

Ho sebetsa li-valve tsa ho koala

• Pele o bula kapa o koala belofo e koalang, lokolla valve spindle ka hoo e ka bang. ¼ ea ho chenchana ka tatellano ea oache.
• Ka mor'a ho kenya valve e koalang, tiisa seal spindle spindle ho ea ka nako.

Mokhoa oa ho sebetsa oa likhokahano tsa lits'ebeletso tse notlehang tsa Suction line valve

Ho bula valve ea ho koala:
Spindle: retelehela ka ho le letshehadi (counter-clockwise) moo e tla ya teng.
—> Valofo e koetsoeng e butsoe ka botlalo / khokahano ea tšebeletso e koetsoe. Khokahano e ke keng ea koaloa e etselitsoe lisebelisoa tsa polokeho.

Ho bula khokahano ea litšebeletso

• Spindle: Fetolela ½ – 1 ho ea ka ho le letona.

→ Khokahano ea lits'ebeletso e butsoe / valve e koalang e butsoe.
Khokahano e ke keng ea koaloa e etselitsoe lisebelisoa tsa polokeho.
Ka mor'a ho kenya letsoho, ka kakaretso kenya sekoahelo sa tšireletso ea spindle hape 'me u tiise ka 14-16 Nm. Sena se sebetsa e le tšobotsi ea bobeli ea ho tiisa nakong ea ts'ebetso.

 Mokhoa oa ho sebetsa oa likhokahano tsa lits'ebeletso tse notlehang Hlakola valve ea mohala

Ho bula valve ea ho koala:

• Spindle: retelehela ka ho le letshehadi (counter-clockwise) moo e tla ya teng.

→ Belofo ea ho tima e butsoe ka botlalo / khokahano ea litšebeletso e koetsoe.

Ho bula khokahano ea litšebeletso

• Spindle: Fetolela ½ – 1 ho ea ho le letona ho ea ka tšupa-nako.

→ Khokahano ea lits'ebeletso e butsoe / valve e koalang e butsoe.

Ka mor'a ho kenya letsoho, ka kakaretso kenya sekoahelo sa tšireletso ea spindle hape 'me u tiise ka 14-16 Nm.
Sena se sebetsa e le tšobotsi ea bobeli ea ho tiisa nakong ea ts'ebetso.

Khokelo ea motlakase

KOTSI
Kotsi ea ho tsosoa ke motlakase! Phallo e phahamengtage!
Etsa mosebetsi feela ha sistimi ea motlakase e khaotsoe phepelong ea motlakase!

TLHOKOMELO Ha o hokela lisebelisoa ka thapo ea motlakase, ho tlameha ho bolokoe radius e kobehang bonyane 3 x bophara ba cable bakeng sa ho beha mohala.

TSEBISO
Hokela enjene ea compressor ho latela setšoantšo sa potoloho (sheba kahare ho lebokose la terminal).

• Sebelisa thapo e loketseng ea ho kena ea mofuta o nepahetseng oa tšireletso (sheba poleiti ea lebitso) bakeng sa ho tsamaisa likhoele ka har'a lebokose la terminal. Kenya li-reliefs tsa khatello 'me u thibele matšoao a likhoele holim'a likhoele.
• Bapisa voltage le makhetlo a mangata le data bakeng sa phepelo ea motlakase ea mantlha.

Hokela enjene feela haeba litekanyetso tsena li tšoana.

Tlhahisoleseding bakeng sa khetho ea sehokahanyi le motlakase
Lisebelisoa tsohle tsa ts'ireletso le li-switching kapa tsa ho beha leihlo li tlameha ho hlophisoa ho latela melaoana ea polokeho ea lehae le lintlha tse behiloeng (mohlala, VDE) hammoho le tlhaiso-leseling ea moetsi. Li-switches tsa ts'ireletso ea likoloi lia hlokahala! Likhokahano tsa enjene, likhoele tsa phepelo, li-fuse le li-switches tsa ts'ireletso ea makoloi li tlameha ho lekanyetsoa ho latela boholo ba hajoale bo sebetsang (sheba poleiti ea mabitso). Bakeng sa ts'ireletso ea enjene, sebelisa sesebelisoa sa ts'ireletso se itšetlehileng ka bongata le se liehang ho feta nako bakeng sa ho beha leihlo mekhahlelo eohle e meraro. Beha sesebelisoa sa ts'ireletso ea boima bo feteletseng hore se tlameha ho sebelisoa nakong ea lihora tse 2, haeba ho na le makhetlo a 1.2 ho feta. sebetsa jwale.

Khokahano ea enjene e khannang le potoloho ea linaleli

Ho qala ha delta ea linaleli ho khoneha feela ka 230 V voltage phepelo. ExampLe:

Khokahano ea enjene e khannang e nang le seketsoana sa matsoelintsoeke

ExampLe:

HLOKOMELA: Ho hlōleha ho etsa sena ho fella ka masimo a rotary a hanyetsanang le ho baka tšenyo ea motlakase. Kamora hore enjene e qale ka mokhoa o sa fellang oa 1, moea o sa fellang oa 2 o tlameha ho buloa ka mor'a tieho e kholo ea motsotsoana o le mong. Ho hloleha ho ikamahanya le maemo ho ka ama bophelo ba tšebeletso ea koloi hampe.

Setšoantšo sa potoloho bakeng sa qalo e tobileng

BT1	Cold conductor (PTC sensor) motor winding
BT2	Thermostat e sireletsang mocheso (sensor ea PTC)
FC1	Laola li-switches tsa polokeho ea potoloho
FC2	Laola fuse ea potoloho ea matla
BP1	Tlhokomelo e phahameng ea tšireletso ea khatello
BP2	Ketane ea polokeho (ho beha leihlo khatello e phahameng / e tlase)
BT3	Sesebelisoa sa ho lokolla (thermostat)

QA1	Phetoho e kholo
SF1	Taolo voltage switjha
EC1	Compressor motor
QA2	Mohokahanyi oa compressor
INT69 G	Yuniti ea ho bulela elektroniki INT69 G
EB1	Mofuthu oa ho futhumatsa oli

Yuniti ea ho bulela elektroniki INT69 G
Enjene ea compressor e kentsoe li-sensor tse batang tsa mocheso oa conductor (PTC) tse hokahaneng le yuniti ea trigger ea elektroniki INT69 G ka lebokoseng la terminal. Boemong ba mocheso o feteletseng ha o potoloha enjene, INT69 G e koala sehokelo sa enjene. Ha e se e pholile, e ka qalisoa hape ha senotlolo sa elektroniki sa phepelo ea phepelo (li-terminals B1 + B2) se ka lokolloa ka ho sitisa phano ea phepelo.tage.
Lehlakore le chesang la khase ea compressor le ka boela la sireletsoa khahlanong le mocheso o feteletseng ka ho sebelisa li-thermostats tsa tšireletso ea mocheso (sesebelisoa).
Yuniti e tsamaea ha maemo a ts'ebetso a le boima haholo kapa a sa lumelloeng. Fumana le ho lokisa sesosa.

TSEBISO
Sephetho sa relay switching se etsoa joalo ka khokahano e phaphametseng ea phetoho. Potoloho ena ea motlakase e sebetsa ho latela molao-motheo oa hona joale o khutsitseng, ke hore, relay e oela sebakeng se sa sebetseng ebe e tima sekontiri sa enjene leha ho ka ba le khefu ea kutlo kapa potoloho e bulehileng.

Khokahano ea yuniti ea trigger INT69 G
TSEBISO  Hokela yuniti ea trigger INT69 G ho latela setšoantšo sa potoloho. Sireletsa yuniti ea trigger ka fuse e liehang ho sebetsa (FC2) ea max. 4 A. E le ho netefatsa ts'ebetso ea ts'ireletso, kenya mochine oa trigger e le ntho ea pele ho potoloho ea matla a ho laola.

TLHOKOMELO
Lekanya potoloho ea BT1 le BT2 (sensor ea PTC) ha ea tlameha ho kopana le matla a kantletage.
Sena se ka senya li-sensor tsa INT69 G le PTC.

Khokahano ea kantle INT69 G

Teko ea ts'ebetso ea yuniti ea trigger INT69 G
Pele o laela, ka mor'a ho rarolla mathata kapa ho etsa liphetoho ho potoloho ea matla a taolo, hlahloba ts'ebetso ea "trigger unit". Etsa tlhahlobo ena u sebelisa continuity tester kapa gauge.

	Lekhalo naha	Relay boemo
1.	Boemo bo sa sebetseng	11-12
2.	Ho bulela INT69 G	11-14
3.	Tlosa sehokelo sa PTC	11-12
4.	Kenya sehokelo sa PTC	11-12
5.	Seta bocha ka mor'a ho bulela lithapo tse kholo	11-14

Ho laela

Litokisetso tsa ho qala
TSEBISO Ho sireletsa compressor khahlanong le maemo a sa lumelloeng a ts'ebetso, khatello e phahameng le li-pressostats tse tlase li tlamehile ka lehlakoreng la ho kenya.
Compressor e entse liteko fekthering mme mesebetsi eohle e lekoa. Ka hona, ha ho na litaelo tse khethehileng tsa ho sebetsa.
Sheba konpresser bakeng sa tšenyo ea lipalangoang!

Teko ea matla a khatello
Compressor e 'nile ea lekoa fekthering bakeng sa botšepehi ba khatello. Leha ho le joalo, haeba tsamaiso eohle e lokela ho ba tlas'a teko ea botšepehi ba khatello, sena se lokela ho etsoa ho latela EN 378-2 kapa maemo a ts'ireletso a ts'oanang ntle le ho kenngoa ha compressor.

Leak teko
KOTSI
Kotsi ea ho phatloha!
Compressor e tlameha ho hatelloa feela ka ho sebelisa nitrogen (N2). Le ka mohla u se ke ua hatella ka oksijene kapa likhase tse ling!
Khatello e phahameng ka ho fetesisa e lumelletsoeng ea compressor ha ea lokela ho fetisoa ka nako efe kapa efe nakong ea tlhahlobo (sheba data ea poleiti ea mabitso)! Se ke oa kopanya sehatsetsi leha e le sefe le naetrojene kaha sena se ka etsa hore moeli oa ho tima o fetele sebakeng sa bohlokoa.
Etsa tlhahlobo ea ho lutla setsing sa sehatsetsi ho latela EN 378-2 kapa maemo a ts'ireletso a ts'oanang, ha u ntse u shebile khatello e phahameng e lumelletsoeng ea compressor.

Pholoso
TLHOKOMELO U se ke ua qala compressor haeba e le tlas'a vacuum. U se ke ua sebelisa leha e le efe voltage - esita le bakeng sa liteko (e tlameha ho sebetsoa feela ka sehatsetsing).
Tlas'a vacuum, bohole ba hona joale ba spark-over le creepage ea liboutu tsa khokahano ea boto ea terminal lia khutsufala; sena se ka fella ka ho senyeha ha boto ea matsoelintsoeke le terminal.

• Ntlha ea pele, tlosa tsamaiso 'me u kenye compressor ts'ebetsong ea ho tlosa. Fokotsa khatello ea compressor.
• Bula li-valve tsa ho koala le ho koala line ea khatello.
• Tlosa mahlakore a khatello ea ho hula le ho ntša metsi ka pompo ea vacuum.
• Qetellong ea ts'ebetso ea ho tsoa, ​​vacuum e lokela ho ba <1.5 mbar ha pompo e tima. Pheta ts'ebetso ena hangata kamoo ho hlokahalang.

Tefiso ea sehatsetsing
TLHOKOMELO Apara liaparo tsa boitšireletso tse kang likhalase le liatlana tse itšireletsang!

•  Etsa bonnete ba hore li-valve tsa ho koala le tsa khatello li bulehile.
• Ha konpresser e tima, eketsa sehatsetsi sa metsi ka ho toba ho condenser kapa receiver, ho senya vacuum.
• Haeba sehatsetsi se hloka ho phahamisoa ka mor'a ho qala kompressor, se ka phahamisoa ka mokhoa oa mouoane ka lehlakoreng la ho huloa, kapa, ho nka mehato e loketseng ea ho itšireletsa, hape ka mokhoa oa mokelikeli sebakeng se kenang ho mouoane.

TLHOKOMELO

•  Qoba ho tlatsa sistimi ka sehatsetsing!
• Ho qoba ho fetoha ha maikutlo, metsoako ea sehatsetsi sa zeotropic e tlameha ho tlatsoa feela ka sehatsetsing ka sebopeho sa mokelikeli.
• Se ke oa tšela se pholileng ka metsi ka valve ea ho monya holim'a compressor.
• Ha ho lumelloe ho kopanya li-additives le oli le sehatsetsing.

E qalang
TLHOKOMELO Netefatsa hore li-valve tse koalang ka bobeli li bulehile pele u qala komporo!

• Sheba hore lisebelisoa tsa polokeho le ts'ireletso (switch switch, ts'ireletso ea koloi, mehato ea ts'ireletso ea likhokahano tsa motlakase, joalo-joalo) kaofela li sebetsa hantle.
• Tlosa compressor 'me u lumelle ho sebetsa bonyane metsotso e 10.
• Sheba boemo ba oli ka: Oli e tlameha ho bonahala ka khalase ea pono.

TLHOKOMELO Haeba palo e kholo ea oli e tlameha ho eketsoa, ​​​​ho na le kotsi ea litlamorao tsa hamore ea oli.
Haeba ho joalo, hlahloba ho khutla ha oli!

Ho qoba slugging
TLHOKOMELO Slugging e ka senya compressor mme ea etsa hore sehatsetsi se lutle.

Ho thibela slugging:

• Sistimi e felletseng ea lihatsetsi e tlameha ho etsoa ka nepo.
• Likarolo tsohle li tlameha ho lekanngoa ka tsela e lumellanang mabapi le tlhahiso (haholo-holo evaporator le li-valve tsa ho atolosa).
• Mocheso o matla oa khase ea suction ha o kenya compressor o lokela ho ba min. 7 - 10 K. (hlahloba boemo ba valve ea ho atolosa).
• Tsamaiso e tlameha ho fihla boemong ba tekano.
• Haholo-holo lits'ebetsong tse mahlonoko (mohlala, lintlha tse 'maloa tsa mouoane), mehato e khothaletsoa joalo ka ho nkela maraba a metsi, valve ea solenoid moleng oa mokelikeli, jj.
• Ha hoa lokela ho ba le motsamao oa se pholileng leha e ka ba ofe ha konpresser e ntse e eme.

Tlhokomelo

Tokisetso
TLHOKOMELO
Pele o qala mosebetsi ofe kapa ofe oa compressor:

•  Tlosa compressor 'me u e sireletse ho thibela ho qala bocha. Fokotsa compressor ea khatello ea sistimi.
  Thibela moea ho kena ka har'a sistimi!

Ka mor'a hore tlhokomelo e etsoe:

• Hokela senotlolo sa polokeho. Tlosa compressor. Lokolla switch lock.

Mosebetsi o tlameha ho etsoa

•  Phetoho ea oli: Ha e le hantle, phetoho ea oli ha e tlamehe haeba sistimi e etsoa le ho sebelisoa ka nepo. Leha ho le joalo, ho ipapisitse le boiphihlelo ba lilemo tse mashome, re khothaletsa hore ho etsoe mosebetsi o latelang oa phetoho / litšebeletso tsa oli:
  • Phetoho ea pele ea oli nakong ea tlhokomelo ea pele ea sistimi.
  • Ebe ka mor'a lihora tse ling le tse ling tsa 10,000 - 12,000 tsa ts'ebetso, le hoja e se lilemo tse fetang 3, hloekisa sesepa sa oli ka nako e le 'ngoe. Lahla oli ka hare ho latela melaoana e sebetsang ea naha.
• Litlhahlobo tsa selemo le selemo: Boemo ba oli, ho dutla ho tiileng, lerata le mathang, likhatello, mocheso, ts'ebetso ea lisebelisoa tse thusang joalo ka heater ea sump ea oli, switch switch.

Litlhahiso tsa likarolo tse ling / lisebelisoa
Likarolo tse ling tse fumanehang le lisebelisoa li ka fumanoa ho sesebelisoa sa rona sa khetho sa compressor tlasa vap.bock.de hammoho le ho bockshop.bock.de.
Sebelisa likarolo tsa 'nete tsa Bock feela!

Lisebelisoa / oli
Mofuta oa oli o tlatsitsoeng joalo ka maemo fekthering o tšoailoe letlapeng la mabitso, 'me sena se lokela ho sebelisoa kamehla, esita le maemong a litsi tsa tlhokomelo. Mefuta e meng ea oli e ka fapana haholo ka boleng ka lebaka la li-additives kapa lisebelisoa tse tlase tse tala tse entsoeng ke moetsi. Ho netefatsoa ka har'a li-compressor ho ke ke ha netefatsoa, ​​haeba ho sebelisoa mefuta e meng ea oli. Ke ka lebaka lena, hore re khothaletsa feela tšebeliso ea oli e tsoang ho Bock! Bock ha e nke boikarabello bakeng sa tšenyo leha e le efe e bakoang ke mefuta e meng ea oli.

Lihatsetsi	Mefuta ea oli e tloaelehileng ea Bock
HCFC (mohlala R134a, R407C)	BOKANG hloa E55

Ho tlosa
Koala li-valve tse koalang holim'a compressor. Hlakola sehatsetsing (ha sea lokela ho ntšoa tikolohong) 'me u se lahle ho latela melaoana. Ha konpresser e tepeletse maikutlo, hlakola li-screws tsa li-valve tse koalang. Tlosa compressor u sebelisa sehole se loketseng. Lahla oli ka hare ho latela melaoana e sebetsang ea naha.

Lintlha tsa tekheniki

Mofuta

No. ea lisilindara

Tlosa- ka 50Hz (2900 rpm)

Lintlha tsa motlakase 3

Boima ba 'mele

Likhokahano 4

Tefiso ea oli

Molumo khatello boemo

Moqtage     1

Max. Ho sebetsa jwale 2 Y

Max. matla sebelisa- tion 2

Ho qala jwale (rotor notletsoe) Y

Hlakola mohala oa DV

Ho hula mohala oa SV

L / M / H 5

m3/h

A

kW

A

kg

mm (inch)

mm (inch)

Ltr.

dB(A)

HGX34e/255-2

4

44,3

380-420 VY - 3 - 50 Hz

25,8

16,0

117

95

22 (7/8)

35 (13/8)

1,3

62 / 59 / 58

HGX34e/315-2

54,7

24,3

14,7

117

94

64 / 62 / 60,5

HGX34e/315-2 S

54,7

32,2

19,0

172

102

66 / 64 / 63

HGX34e/380-2

66,1

38,0

23,5

172

102

67 / 64,5 / 64

Mamello (± 10%) e amanang le boleng bo bolelang ba voltage range. Karolo e 'ngoetages le mefuta ea hona joale ka kopo. Litlhaloso tsa max. tšebeliso ea matla e sebetsa bakeng sa ts'ebetso ea 50Hz. Bakeng sa ts'ebetso ea 60Hz, litlhaloso li tlameha ho atolosoa ke ntlha ea 1.2. The max. mosebetsi oa hona joale o ntse o sa fetohe. Nahana ka max. e sebetsang hajoale / max. tšebeliso ea matla bakeng sa moralo oa li-fuse, likhoele tsa phepelo le lisebelisoa tsa polokeho. Fuse: Sehlopha sa tšebeliso AC3 Litlhaloso tsohle li ipapisitse le karolelano ea voltage fapaneng Bakeng sa likhokahano tsa solder L = mocheso o tlase (-35 / 40 °C), M = pholiso e tloaelehileng (-10 / 45 °C), H = boemo ba moea (5 / 50 ° C) boemo ba khatello ea molumo bo lekantsoeng sebakeng sa ho metha se bonahatsang, sebaka se lekanyang 1m . Ts'ebetso ea konpresser ho 50 Hz (1450 rpm), sehatsetsing R404A. Maemo a boletsoeng ke litekanyetso tse tloaelehileng, mamello ± 2 dB(A).

Litekanyo le likhokahano

Tlhaloso: HGX34P 2-pole 

SV DV	Suction line bona data ea tekheniki, Khaolo ea 8 Ho tsoa line
A	Lehlakore la khokahanyo, ha le notleloe	1/8" NPTF
A1	Lehlakore la ho hula la kgokelo, le notlellwang	7/16 “UNF
B	Lehlakore la ho lahla khokahanyo, ha le notleloe	1/8" NPTF
B1	Lehlakore la ho lahla la khokahanyo, le notlelloa	7/16 “UNF
C	Phetoho ea tšireletso ea khatello ea oli ea khokahano	1/8" NPTF
D1	Ho khutla ha oli ea khokahanyo ho tloha karohanong ea oli	1/4" NPTF
F	Sekhahla sa oli	M12 x 1,5
H	Plaka ea tefiso ea oli	1/4" NPTF
J	Ho kopanya oli ea ho futhumatsa sump	3/8" NPTF
K	Khalase e bonang	1 1/8“- 18 UNEF
L	Khokahano ea thermostat ea tšireletso ea mocheso	1/8" NPTF
M	Sesefa sa oli	M12 x 1,5
O	Taolo ea boemo ba oli ea khokahano	1 1/8“- 18 UNEF

Phatlalatso ea ho kenyeletsoa

Phatlalatso ea ho kenngoa ha mochini o sa fellang ho latela EC Machinery Directive 2006/42/EC, Annex II 1. B

Moetsi:
Bock GmbH
Benzstrasse 7
72636 Frikenhausen, Jeremane

Rona, joalo ka moetsi, re phatlalatsa ka boikarabello ba hore mochini o sa phethahalang

• Lebitso: Semi-hermetic compressor

Mefuta:

• HG(X)12P/60-4 S (HC) ………………………HG(X)88e/3235-4(S) (HC)
• UL-HGX12P/60 S 0,7…………………………… UL-HGX66e/2070 S 60
• HGX12P/60 S 0,7 LG ………………………….. HGX88e/3235 (ML/S) 95 LG
• HG(X)22(P)(e)/125-4 A ……………………… HG(X)34(P)(e)/380-4 (S) A
• HGX34(P)(e)/255-2 (A) …………………….. HGX34(P)(e)/380-2 (A)(K)
• HA(X)12P/60-4 ……………………………… HA(X)6/1410-4
• HAX22e/125 LT 2 LG ………………………. HAX44e/665 LT 14 LG
• HGX12e/20-4 (ML/S) CO2 (LT) ……….. HGX44e/565-4 S CO2
• UL-HGX12e/20 (S/ML) 0,7 CO2 (LT)… UL-HGX44e/565 S 31 CO2
• HGX12/20-4 (ML/S/SH) CO2T………….. HGX46/440-4 (ML/S/SH) CO2 T
• UL-HGX12/20 ML(P) 2 CO2T…………. UL-HGX46/440 ML(P) 53 CO2T
• HGZ(X)7/1620-4 ……………………………. HGZ(X)7/2110-4
• HGZ(X)66e/1340 LT 22……………………… HGZ(X)66e/2070 LT 35
• HRX40-2 CO2 TH…………………………….. HRX60-2 CO2 TH

Lebitso: Bula mofuta oa compressor

• Mefuta:
  • F(X)2 ……………………………………… F(X)88/3235 (NH3)
  • FK(X)1…………………………………….. FK(X)3
  • FK(X)20/120 (K/N/TK)…………….. FK(X)50/980 (K/N/TK)
• Nomoro ea serial: BC00000A001 - BN99999Z999

e lumellana le lipehelo tse latelang tsa Taelo e boletsoeng ka holimo:
Ho ea ka Annex I, lintlha 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.3, 1.3.7, 1.5.1, 1.5.2, 1.5.13 le 1.7.1 ho 1.7.4 ( ntle le 1.7.4 f) li phethahala.

Ho sebelisoa litekanyetso tse lumellanang, haholo-holo:

• TS EN ISO 12100 Tšireletseho ea mochini - Melao-motheo e akaretsang ea moralo - Tekolo ea kotsi le phokotso ea likotsi.
• TS EN 12693 Sistimi ea sehatsetsi le lipompo tsa mocheso - Litlhoko tsa polokeho le tikoloho - Li-compressor tse ntle tsa sehatsetsi

Maikutlo:
Re boetse re phatlalatsa hore litokomane tse khethehileng tsa tekheniki tsa mochini ona o sa fellang li entsoe ho latela Annex VII, Karolo ea B, 'me re tlamehile ho fana ka tsena ka kopo e utloahalang ho tsoa ho balaoli ba naha ka bomong ka ho fetisetsa boitsebiso.

Komisi e thibetsoe ho fihlela ho netefalitsoe hore mochini oo mochini o sa fellang ka holimo o tla kengoa ho ona o lumellana le EC Machinery Directive le EC Declaration of Conformity, Annex II. 1. A e teng.

Motho ea nang le tumello ea ho hlophisa le ho fana ka litokomane tsa tekheniki:
Bock GmbH
Alexander Layh
Benzstrasse 7
72636 Frikenhausen, Jeremane

Frickenhausen, la 04 Pherekhong 2021
ke. A. Alexander Layh, Hlooho ea Lefatše ea R&D

Phatlalatso ea ho kenyeletsoa ha mechini e seng e phethiloe ho latela melaoana ea UK Statutory Instrument Supply of Machinery (Safety) 2008, Annex II 1. B.

Moetsi:
Bock GmbH
Benzstrasse 7
72636 Frikenhausen, Jeremane

Rona, joalo ka moetsi, re phatlalatsa ka boikarabello ba hore mochini o phethiloeng ka karolo e 'ngoe

Lebitso: Semi-hermetic compressor

Mefuta:

• HG(X)12P/60-4 S (HC) ………………………HG(X)88e/3235-4(S) (HC)
• UL-HGX12P/60 S 0,7…………………………… UL-HGX66e/2070 S 60
• HGX12P/60 S 0,7 LG ………………………….. HGX88e/3235 (ML/S) 95 LG
• HG(X)22(P)(e)/125-4 A ……………………… HG(X)34(P)(e)/380-4 (S) A
• HGX34(P)(e)/255-2 (A) …………………….. HGX34(P)(e)/380-2 (A)(K)
• HA(X)22e/125-4 …………………………….. HA(X)6/1410-4
• HAX22e/125 LT 2 LG ………………………. HAX44e/665 LT 14 LG
• HGX12e/20-4 (ML/S) CO2 (LT) ……….. HGX44e/565-4 S CO2
• UL-HGX12e/20 (S/ML) 0,7 CO2 (LT)… UL-HGX44e/565 S 31 CO2
• HGX12/20-4 (ML/S/SH) CO2T………….. HGX46/440-4 (ML/S/SH) CO2 T
• UL-HGX12/20 ML(P) 2 CO2T…………… UL-HGX46/440 ML(P) 53 CO2T
• HGZ(X)7/1620-4 ……………………………. HGZ(X)7/2110-4
• HGZ(X)66e/1340 LT 22……………………… HGZ(X)66e/2070 LT 35
• HRX40-2 CO2 TH…………………………….. HR(Z)X60-2 CO2 T (H)(V)

Lebitso: Bula mofuta oa compressor

Mefuta:

• • F(X)2 ……………………………………………… F(X)88/3235 (NH3)
  • FK(X)1…………………………………………….. FK(X)3
  • FK(X)20/120 (K/N/TK)……………………….. FK(X)50/980 (K/N/TK)

Nomoro ea letoto: BC00000A001 – BN99999Z999

e tsamaellana le lipehelo tse latelang tsa sesebelisoa sa Molao se boletsoeng ka holimo:
Ho ea ka Schedule 2, part1, lintlha 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.3, 1.3.7, 1.5.1, 1.5.2, le 1.7.1 ho 1.7.4 (ntle le 1.7.4 f) li phethahala. TS EN ISO 12100 Melao-motheo e akaretsang ea moralo - Tekanyetso ea kotsi le phokotso ea kotsi ea TS EN ISO 2010:12693 Sistimi ea sehatsetsi le lipompo tsa mocheso - Litlhoko tsa polokeho le tikoloho

Maikutlo: Re boetse re phatlalatsa hore litokomane tse khethehileng tsa tekheniki tsa mochini ona o seng o phethiloe o entsoe ho latela Sehlomathiso II, 1. B 'me re tlamehile ho fana ka tsena ka kopo e utloahalang ho tsoa ho balaoli ba naha ka bomong ka ho fetisetsa data.

Ho romelloa ho thibetsoe ho fihlela ho netefalitsoe hore mochine oo karolo e 'ngoe e tlatsitsoeng ka holimo e tla kenngoa ho oona o lumellana le melaoana ea UK Statutory Instrument Supply machinery (Safety) 2008 le EC Declaration of Conformity, Annex II, 1. A e teng.

Motho ea nang le tumello ea ho hlophisa le ho fana ka litokomane tsa tekheniki:
Bock GmbH
Alexander Layh
Benzstrasse 7
72636 Frikenhausen, Jeremane

Frickenhausen, la 14 Mphalane 2022
ke. A. Alexander Layh, Hlooho ea Lefatše ea R&D

Danfoss A / S
Litharollo tsa Boemo ba Leholimo
danfoss.com
+45 7488 2222 Tlhahisoleseding efe kapa efe, ho kenyeletsoa, ​​empa e sa felle feela ho tlhahisoleseling mabapi le khetho ea sehlahisoa, ts'ebeliso ea sona kapa ts'ebeliso ea eona, moralo oa sehlahisoa, boima, boholo, bokhoni kapa data efe kapa efe ea tekheniki ho libuka tsa lihlahisoa, litlhaloso tsa likhatiso, lipapatso, joalo-joalo le hore na e fumaneha ka ho ngola, ka molomo, ka mokhoa oa elektroniki, inthaneteng kapa ka ho khoasolla, e tla nkuoa e le tsebo, 'me e tlama feela haeba, ho isa boholeng boo, ho etsoa litšupiso tse hlakileng khotheishene kapa netefatso ea taelo. Danfoss e ke ke ea amohela boikarabello bofe kapa bofe bakeng sa liphoso tse ka bang teng libukeng, libukana, livideo le lintho tse ling. Danfoss e na le tokelo ea ho fetola lihlahisoa tsa eona ntle le tsebiso. Sena se sebetsa le ho lihlahisoa tse otarang empa li sa tlisoa ha feela liphetoho tse joalo li ka etsoa ntle le liphetoho sebopeho, ho lekana kapa tšebetso ea sehlahisoa. Matšoao 'ohle a thepa ena ke thepa ea lik'hamphani tsa Danfoss A/S kapa tsa Danfoss. Danfoss le logo ea Danfoss ke matšoao a khoebo a Danfoss A/S. Litokelo tsohle li sirelelitsoe.

AQ452817532729en-000201
© Danfoss | Litharollo tsa Tlelaemete | 2023.06

Litokomane / Lisebelisoa

Danfoss BOCK HGX34e 2 Pole Hg Compressors [pdf] Tlhophiso Tataiso BOCK HGX34e 2 Pole Hg Compressors, BOCK HGX34e, 2 Pole Hg Compressors, Hg Compressors, Compressors

Litšupiso

• Bukana ea Mosebelisi