Danfoss AK-CC 550B Case Controller
Litlhaloso:
- Mohlala: AK-CC 550B
- Phepelo ea Matla: 230 V ac, 50/60 Hz
Litaelo tsa Tšebeliso ea Sehlahisoa
Lihokelo tse Eketsehileng:
- RS485 (terminal 51, 52, 53)
- RJ45 (bakeng sa puisano ea data)
- Li-sensor: S2, S6, S3, S4, S5
- MODBUS (bakeng sa puisano ya data)
Litaelo tsa Tšebeliso:
Netefatsa hore likhokahano tsohle li lumellana le litlhoko tsa likhokahano tsa data. Sheba lingoliloeng: RC8AC bakeng sa lintlha tse ling.
Phepelo ea motlakase:
Netefatsa hore phepelo e fana ka voltage ke 230 V ac, 50/60 Hz.
Khokahano ea DO1:
Hokela valve ea katoloso ea mofuta oa AKV kapa AKVA. Khoeli e tlameha ho ba 230 V ac khola.
Khokahano ea Alarm ea DO2:
Maemong a alamo le ha molaoli a se na matla, hokela terminal 7 le 8.
Boitsebiso
Litekanyo
Molao-motheo
S2:
Sensor ea insulate
Lintlha tsa AKV!!
AK-CC 550B
| Tlhahisoleseling e 'Ngoe: | Bukana ea Senyesemane | RS8GL… | www.anopela.com |
Mookameli o fuoa matšoao a tsoang fekthering a bontšang kopo 1.
Haeba u sebelisa ts'ebeliso e 'ngoe, matšoao a fanoa e le hore u ka hlomella e loketseng.
Puisano ya data
Bohlokoa Likhokahano tsohle tsa puisano ea data MODBUS, DANBUSS le RS 485 li tlameha ho lumellana le litlhoko tsa likhoele tsa puisano tsa data. Sheba lingoliloeng: RC8AC.
Motsamaisi oa sistimi / Gateway
Hlahisa EKA 163 / 164
L <15 m
L > 15 m
Lihokelo
Fetileview ea liphetho le lits'ebetso.
Sheba hape litšoantšo tsa motlakase pejana ho taeo
DI1
Letšoao la ho kenya la dijithale.
Ts'ebetso e hlalositsoeng e sebetsa ha ho kenya letsoho ho khutsufalitsoe/ho buloa. Mosebetsi o hlalosoa ho o02.
DI2
Letšoao la ho kenya la dijithale.
Ts'ebetso e hlalositsoeng e sebetsa ha ho kenya letsoho ho khutsufalitsoe/ho buloa. Mosebetsi o hlalosoa ho o37.
Mohatelli oa khatello
AKS 32R
Hokela ho terminal 30, 31 le 32.
(Cable e sebelisitsoeng 060G1034: E Ntšo=30, Blue=31, Brown=32)
Letšoao le tsoang ho mochine o mong oa khatello le ka amoheloa ke balaoli ba ka bang 10. Empa ha feela ho se na khatello e matla e fokotsehang pakeng tsa lievaporator tse lokelang ho laoloa. Sheba setšoantšo leqepheng la 36.
S2, S6
Pt 1000 ohm sensor
S6, senotlolo sa sehlahisoa
EA-3-S4
Pt 1000 ohm sensor kapa PTC 1000 ohm sensor. Tsohle li lokela ho ba tsa mofuta o le mong.
S3, sensor ea moea, e behiloeng moeeng o futhumetseng pele ho mouoane
S4, sensor ea moea, e behiloeng moeeng o batang ka mor'a mouoane (tlhokeho ea S3 kapa S4 e ka tlosoa ho hlophisoa) S5, sensor ea defrost, e behiloeng holim'a evaporator.
EKA Pontšo
Haeba ho na le ho bala ka ntle / ts'ebetso ea molaoli, mofuta oa pontšo EKA 163B kapa EKA 164B o ka hokahanngoa.
RS485 (terminal 51, 52, 53)
Bakeng sa puisano ea data, empa feela haeba mojule oa puisano ea data o kenngoa ho molaoli. Mojule e ka ba LON RS485, DANBUSS kapa MODBUS.
- Terminal 51 = skrine
- Theminale ea 52 = A (A+)
- Terminal 53 = B (B-)
(Bakeng sa LON RS485 le mofuta oa heke AKA 245 heke e tlameha ho ba mofuta oa 6.20 kapa ho feta.)
RJ45
Bakeng sa puisano ea data, empa feela haeba module ea TCP / IP e kenngoa ho molaoli. (OEM)
MOHAPI
Bakeng sa puisano ea data.
- Terminal 56 = skrine
- Terminal 57 = A+
- Terminal 58 = B-
(Ka lehlakoreng le leng, li-terminal li ka hokeloa ho mofuta oa kantle oa EKA 163A kapa 164A, empa ha li khone ho sebelisoa bakeng sa puisano ea data. Khokahano efe kapa efe ea data e tlameha ho etsoa ke o mong oa mekhoa e meng.)
Phepelo voltage
230 V ac, 50/60 Hz
DO1
Khokahano ea mofuta oa valve ea ho atolosa AKV kapa AKVA. Khoeli e tlameha ho ba 230 V ac khola.
DO2
Alamo
Ho na le kamano pakeng tsa terminal 7 le 8 maemong a alamo le ha molaoli a se na matla.
Mocheso oa terene le lisebelisoa tsa ho futhumatsa ka har'a terei ea marotholi
Ho na le khokahano lipakeng tsa terminal 7 le 9 ha ho futhumatsa.
Bosiu bo foufetseng
Ho na le khokahano lipakeng tsa terminal 7 le 9 ha blind blind e felile.
Suction line valve
Ho na le khokahano lipakeng tsa terminal 7 le 9 ha mohala oa ho hula o tlameha ho buloa.
DO3
Sehatsetsi, mocheso oa terene, tšebetso ea mocheso, Defrost 2
Ho na le khokahano lipakeng tsa terminal 10 le 11 ha ts'ebetso e tlameha ho sebetsa.
Ntho e futhumatsang ka har'a terei ea marotholi
Ho na le khokahano lipakeng tsa terminal 10 le 11 ha ho futhumatsa.
DO4
Kheloha
Ho na le khokahano lipakeng tsa terminal 12 le 14 ha defrosting e etsahala.
Khase e chesang / valve ea drain
Ho na le khokahano lipakeng tsa terminal 13 le 14 nakong ea ts'ebetso e tloaelehileng.
Ho na le khokahano lipakeng tsa terminal 12 le 14 ha li-valve tsa khase e chesang li tlameha ho buloa.
DO5
Fane
Ho na le khokahano lipakeng tsa terminal 15 le 16 ha fan e buletsoe.
DO6
Relay e khanyang
Ho na le kgokahanyo lipakeng tsa terminal 17 le 18 ha lebone le tlameha ho tuka.
Mocheso oa terene, Compressor 2
Ho na le khokahano lipakeng tsa terminal 17 le 19 ha ts'ebetso e tlameha ho sebetsa.
DI3
Letšoao la ho kenya la dijithale.
Letšoao le tlameha ho ba le voltage ea 0 / 230 V AC.
Mosebetsi o hlalosoa ho o84.
Puisano ya data
Haeba puisano ea data e sebelisoa, ke habohlokoa hore ho kenngoa ha mohala oa puisano ea data ho etsoe ka nepo.
Sheba lingoliloeng tse arohaneng No. RC8AC...
Lerata la motlakase
Lithapo tsa li-sensor, li-input tsa DI le puisano ea data li tlameha ho bolokoa li arohane le likhoele tse ling tsa motlakase:
- Sebelisa literei tsa cable tse arohaneng
- Boloka sebaka se pakeng tsa likhoele bonyane 10 cm
- Lithapo tse telele tse kenyang DI li lokela ho qojoa
Mehopolo ea ho kenya
Tšenyo ea tsietsi, ho se kenngoe hantle, kapa maemo a sebaka sa marang-rang, a ka baka ho se sebetse hantle ha sistimi ea taolo, 'me qetellong ea baka ho senyeha ha semela. Tšireletso e 'ngoe le e 'ngoe e ka khonehang e kenyelelitsoe lihlahisoa tsa rona ho thibela sena. Leha ho le joalo, kemiso e fosahetseng, bakeng sa mohlalaample, e ntse e ka hlahisa mathata. Litaolo tsa elektroniki ha li nke sebaka sa tloaelo e ntle ea boenjiniere. Danfoss e ke ke ea ikarabella bakeng sa thepa leha e le efe, kapa likarolo tsa semela, tse senyehileng ka lebaka la liphoso tse ka holimo. Ke boikarabello ba motho ea kenyang letsoho ho hlahloba ho kenya ka botlalo, le ho lumellana le lisebelisoa tse hlokahalang tsa tšireletso. Ho buuoa ka ho khetheha mabapi le tlhokahalo ea lipontšo ho molaoli ha compressor e emisoa le tlhokahalo ea ba amohelang metsi pele ho li-compressor. Moemeli oa hau oa lehae oa Danfoss o tla thabela ho u thusa ka likeletso tse ling, joalo-joalo.
Defrost e hokahaneng ka likhokahano tsa cable
Li-controller tse latelang li ka kopanngoa ka tsela ena:
EKC 204A, AK-CC 210, AK-CC 250, AK-CC 450, AK-CC 550A,
Sehatsetsi se tsosolosoa ha balaoli bohle ba "lokolla" letšoao la ho qhibiliha.
Defrost e hokahaneng ka puisano ea data
Litlhophiso tsa balaoli ho hokahanya defrosting ea bona li etsahala hekeng / mookameli oa sistimi.
Sehatsetsi se tsosolosoa ha balaoli bohle ba "lokolla" letšoao la ho qhibiliha.
Tshebetso
Pontšo
Litekanyetso li tla bontšoa ka linomoro tse tharo, 'me ka tlhophiso u ka tseba hore na mocheso o lokela ho bontšoa ho °C kapa °F.
Li-diode tse hlahisang leseli (LED) ka phanele e ka pele
Li-LED tse karolong e ka pele li tla khantša ha relay e amehang e butsoe.
Li-diode tse hlahisang leseli li tla benya ha alamo e hlaha.
Boemong bona, o ka khoasolla khoutu ea phoso ho ponts'o ebe o hlakola / saena bakeng sa alamo ka ho fa konopo e kaholimo ho sutumetsa hakhutšoanyane.
Likonopo
Ha u batla ho fetola tlhophiso, likonopo tse holimo le tse tlase li tla u fa boleng bo holimo kapa bo tlase ho latela konopo eo u e tobang. Empa pele o fetola boleng, o tlameha ho fihlella ho menu. U fumana sena ka ho tobetsa konopo e kaholimo metsotsoana e 'maloa - ebe u kenya kholomo ka likhoutu tsa paramethara. Fumana khoutu ea parameter eo u batlang ho e fetola 'me u tobetse li-buttons tse bohareng ho fihlela boleng ba parameter bo bontšoa. Ha o fetotse boleng, boloka boleng bo bocha ka ho tobetsa konopo e bohareng hape.
Examples
Seta menu
- Tobetsa konopo e ka holimo ho fihlela paramethara r01 e bonts'oa
- Tobetsa konopo e ka holimo kapa e ka tlaase 'me u fumane parameter eo u batlang ho e fetola
- Tobetsa konopo e bohareng ho fihlela boleng ba parameter bo bonts'oa
- Tobetsa konopo e ka holimo kapa e tlase ebe u khetha boleng bo bocha
- Tobetsa konopo e bohareng hape ho emisa boleng.
Relay ea alamo ea cutout / alamo ea rasiti/bona khoutu ea alamo
- Tobetsa e khutšoanyane ea konopo e ka holimo
Haeba ho na le likhoutu tse 'maloa tsa alamo li fumaneha ka har'a stack. Tobetsa konopo e ka holimo-holimo kapa e tlase ho feta ho skena stack.
Seta mocheso
- Tobetsa konopo e bohareng ho fihlela boleng ba mocheso bo bonts'oa
- Tobetsa konopo e ka holimo kapa e tlase ebe u khetha boleng bo bocha
- Tobetsa konopo e bohareng hape ho phethela tlhophiso.
Ho bala mocheso ka sensor ea defrost (Kapa sensor ea sehlahisoa, haeba e khethiloe ho o92.)
- Tobetsa e khutšoanyane ea konopo e ka tlaase
Manuel o qala kapa o emisa ho senya
- Tobetsa konopo e ka tlase metsotsoana e mene.
Qala hantle
Ka mokhoa o latelang o ka qala taolo kapele haholo:
- Bula paramethara r12 'me u emise molao (ka yuniti e ncha e sa beoang pele, r12 e tla be e se e behiloe ho 0 ho bolelang hore taolo e emisitsoeng.)
- Khetha khokahano ea motlakase ho latela litšoantšo tse leqepheng la 2 le la 3
- Bula parameter o61 mme u behe nomoro ea khokahanyo ea motlakase ho eona
- Joale khetha e 'ngoe ea li-setting tse seng li setiloe tafoleng
Lenane la tlatsetso bakeng sa litlhophiso (seta ka potlako) Nyeoe Kamore Defrost stop on Defrost stop on nako S5 nako S5 Li-setting esale pele (o62) 1 2 3 4 5 6 Mocheso (SP) 2°C -2°C -28°C 4°C 0°C -22°C Max. temp. tlhophiso (r02) 6°C 4°C -22°C 8°C 5°C -20°C Min. temp. tlhophiso (r03) 0°C -4°C -30°C 0°C -2°C -24°C Letšoao la kutlo bakeng sa thermo-stat. S4% (r15) 100% 0% Moeli oa alamo o holimo (A13) 8°C 6°C -15°C 10°C 8°C -15°C Moeli oa alamo o tlase (A14) -5°C -5°C -30°C 0°C 0°C -30°C Letšoao la kutlo bakeng sa alarmfunct.S4% (A36) 0% 100% 0% Nako e pakeng tsa defrost(d03) 6 h 6h 12h 8h 8h 6h Sensor ea defrost: 0=nako,1=S5, 2=S4 (d10) 0 1 1 0 1 1 DI1 config. (o02) Ho hloekisa mekotla (=10) Mosebetsi oa monyako (=2) Lets'oao la kutlo bakeng sa ponts'o view S4% (017) 0% - Bula paramethara o62 ebe u beha nomoro bakeng sa letoto la litlhophiso tsa pele.
Litlhophiso tse 'maloa tse khethiloeng joale li tla fetisetsoa ho menu. - Khetha sehatsetsing ka parameter o30
- Bula parameter r12 'me u qale molao
- Etsa tlhahlobo ea litlhophiso tsa feme. Litekanyetso tsa lisele tse grey li fetoloa ho latela khetho ea hau ea litlhophiso. Etsa liphetoho tse hlokahalang ho li-parameter tse fapaneng.
- Bakeng sa marang-rang. Beha aterese ho o03
- Romella aterese ho yuniti ea sistimi:
- MODBUS: Kenya ts'ebetso ea scan ninete ho yuniti ea sistimi
- Haeba karete e 'ngoe ea puisano ea data e sebelisoa ho molaoli:
- LON RS485: Kenya tshebetsong tshebetso o04
- DANBUSS: Kenya ts'ebetso ea scan ninete ho yuniti ea sistimi
- Ethernet: Sebelisa Aterese ea MAC
| Paramethara | EL-setšoantšo leqepheng la 2 le la 3 | Min.- boleng | Max.- boleng | Feme tlhophiso | Nnete tlhophiso |
|||||||||||
| Mosebetsi | Khoutu | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |||||
| Ts'ebetso e tloaelehileng | ||||||||||||||||
| Mocheso (setulo) | --- | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | 2 | ||
| Thermostat | ||||||||||||||||
| Phapang | r01 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0.1 K | 20 K | 2 | ||
| Max. moedi wa setpoint setting | r02 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -49°C | 50°C | 50 | ||
| Min. moedi wa setpoint setting | r03 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 49°C | -50 | ||
| Phetoho ea pontšo ea mocheso | r04 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -10 | 10 | 0 | ||
| Thempereichara (°C/°F) | r05 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0/°C | 1/F | 0/°C | ||
| Tokiso ea lets'oao le tsoang ho S4 | r09 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -10 K | 10 K | 0 | ||
| Tokiso ea lets'oao le tsoang ho S3 le S3B | r10 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -10 K | 10 K | 0 | ||
| Ts'ebeletso ea letsoho, taolo ea ho emisa, molao oa ho qala (-1, 0, 1) | r12 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -1 | 1 | 0 | ||
| Ho falla ha litšupiso nakong ea ts'ebetso ea bosiu | r13 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50 K | 50 K | 0 | ||
| Hlalosa tšebetso ea thermostat 1=ON/OFF, 2=Modulating | r14 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 | 1 | ||
| Tlhaloso le boima, haeba ho hlokahala, tsa thermostat lisensara – S4% (100%=S4, 0%=S3) |
r15 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0% | 100% | 100 | ||
| Nako pakeng tsa linako tsa ho qhibiliha | r16 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | Lihora tse 0 | Lihora tse 10 | 1 | ||
| Nako ea nako ea ho qhibiliha | r17 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 mets. | 30 mets. | 5 | ||
| Setting ea mocheso bakeng sa thermostat band 2 . Joalo ka tšebeliso e fapaneng r01 | r21 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | 2 | ||
| Tokiso ea lets'oao le tsoang ho S6 | r59 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -10 K | 10 K | 0 | |||
| Tlhaloso le boima, haeba ho hlokahala, tsa lisensara tsa thermostat ha sekoaelo sa bosiu se buletsoe. (100%=S4, 0%=S3) | r61 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0% | 100% | 100 | ||
| Mosebetsi oa mocheso
Sebaka se se nang lehlakore pakeng tsa sehatsetsi le mosebetsi oa mocheso |
r62 | 1 | 0 K | 50 K | 2 | |||||||||||
| Nako ea ho lieha ho fetoha pakeng tsa sehatsetsing le mosebetsi oa mocheso | r63 | 1 | 0 mets. | 240 mets. | 0 | |||||||||||
| Dialamo | ||||||||||||||||
| Ho lieha bakeng sa alamo ea mocheso | A03 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 mets. | 240 mets. | 30 | ||
| Ho lieha ha alamo ea monyako | A04 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 mets. | 240 mets. | 60 | ||
| Ho lieha ha alamo ea mocheso ka mor'a ho qhibiliha | A12 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 mets. | 240 mets. | 90 | ||
| Moeli o phahameng oa alamo bakeng sa thermostat 1 | A13 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | 8 | ||
| Moeli o tlase oa alamo bakeng sa thermostat 1 | A14 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | -30 | ||
| Moeli o phahameng oa alamo bakeng sa thermostat 2 | A20 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | 8 | ||
| Moeli o tlase oa alamo bakeng sa thermostat 2 | A21 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | -30 | ||
| Moeli o phahameng oa alamo bakeng sa sensor S6 ho thermostat 1 | A22 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | 8 | |||
| Moeli o tlase oa alamo bakeng sa sensor S6 ho thermostat 1 | A23 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | -30 | |||
| Moeli o phahameng oa alamo bakeng sa sensor S6 ho thermostat 2 | A24 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | 8 | |||
| Moeli o tlase oa alamo bakeng sa sensor S6 ho thermostat 2 | A25 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | -30 | |||
| Ho lieha ha nako ea alamo ea S6
Ka setting = 240 alamo ea S6 e tla siuoa |
A26 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 mets. | 240 mets. | 240 | |||
| Ho lieha ha nako ea alamo kapa lets'oao ho kenyelletso ea DI1 | A27 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 mets. | 240 mets. | 30 | ||
| Ho lieha ha nako ea alamo kapa lets'oao ho kenyelletso ea DI2 | A28 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 mets. | 240 mets. | 30 | ||
| Letšoao la thermostat ea alamo. S4% (100%=S4, 0%=S3) | A36 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0% | 100% | 100 | ||
| Ho lieha ha S6 (alamo ea sensor ea sehlahisoa) kamora ho senyeha | A52 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 mets. | 240 mets. | 90 | |||
| Ho lieha ha alamo ea mocheso S3B | A53 | 1 | 1 | 0 mets. | 240 mets. | 90 | ||||||||||
| Sekontiri | ||||||||||||||||
| Min. Ka nako | c01 | 1 | 1 | 1 | 1 | 0 mets. | 30 mets. | 0 | ||||||||
| Min. NAKO-nako | c02 | 1 | 1 | 1 | 1 | 0 mets. | 30 mets. | 0 | ||||||||
| Ho lieha ha nako bakeng sa ho khaola ha comp.2 | c05 | 1 | 0 metsotsoana | 999 metsotsoana | 5 | |||||||||||
| Kheloha | ||||||||||||||||
| Mokgwa wa ho qhibidiha: 0=Ho theoha, 1= EL, 2= Khase | d01 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0/Tlokotsi | 2/gAs | 1/EL | ||
| Defrost setopong mocheso | d02 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0°C | 50°C | 6 | ||
| Nako e pakeng tsa defrost e qala | d03 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 hrs/Ho tima | Lihora tse 240 | 8 | ||
| Max. defrost nako | d04 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 mets. | 360 mets. | 45 | ||
| Nako ea ho falla ha ho fokotseha ha leqhoa ha ho qala | d05 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 mets. | 240 mets. | 0 | ||
| Nako ea ho phomola | d06 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 mets. | 60 mets. | 0 | ||
| Ho lieha ha fan ho qala ka mor'a ho qhibiliha | d07 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 mets. | 60 mets. | 0 | ||
| Mocheso o qalang oa fene | d08 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50 °C | 0 °C | -5 | ||
Fene e ile ea khaoha nakong ea defrost 0: E emisitsoe
|
d09 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 2 | 1 | ||
| Tsoela pele | Khoutu | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Min. | Max. | Fac. | Nnete | |
| Defrost sensor: 0 =Emisa ka nako, 1=S5, 2=S4, 3=Sx (Kopo 1-8 le 10: ka bobeli S5 le S6. Kopo ea 9: S5 le S5B) |
d10 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 3 | 0 | ||
| Pompeta ho lieha | d16 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 mets. | 60 mets. | 0 | ||
| Ho lieha ha ho ntša metsi (e sebelisoa ha ho felloa ke khase e chesang feela) | d17 | 1 | 0 mets. | 60 mets. | 0 | |||||||||||
| Max. aggregate sehatsetsi nako pakeng tsa defrosts tse peli | d18 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | Lihora tse 0 | Lihora tse 48 | 0/OFF | ||
| Chesa ka tereing ea marotholi. Nako ea ho tloha ho emisa ho qhibiliha ho isa ho ho futhumatsa ka tereing ea marotholi e a tima | d20 | 1 | 0 mets. | 240 mets. | 30 | |||||||||||
| Ho fetoha habonolo: 0=ha e sebetse, 1=ho beha leihlo feela, 2=tlola letsatsi le lumelletsoeng, 3=ho tlola ho lumelletsoe bosiu le mots'eare, 4=tekanyetso ea hae + kemiso eohle |
d21 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 4 | 0 | ||
| Ho lieha ha nako pele ho buloa valve ea khase e chesang | d23 | 1 | 0 mets | 60 mets | 0 | |||||||||||
| Mocheso oa seporo nakong ea defrost 0=off. 1=ho qala. 2=Ho hula | d27 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 2 | 2 | |||||
| Max. nako ya -d- pontshong | d40 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 5 mets. | 240 mets. | 30 mets. | ||
| Tekanyo ea mocheso bakeng sa Fan e emisa nakong ea defrost ha d09 e seta ho 3 | d41 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -20°C | 20°C | 0°C | ||
| Mosebetsi oa ho laola ente | ||||||||||||||||
| Max. boleng ba superheat reference (katoloso e omileng) | n09 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2°C | 20°C | 12 | ||
| Min. boleng ba superheat reference (katoloso e omileng) | n10 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2°C | 20°C | 3 | ||
| Mocheso oa mocheso oa MOP. Koala haeba mocheso oa MOP. = 15.0 °C | n11 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 15°C | 15 | ||
| Nako ea nako ea AKV pulsation Feela bakeng sa basebetsi ba koetlisitsoeng | n13 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 3 metsotsoana | 6 metsotsoana | 6 | ||
| Tekanyetso e phahameng ea mocheso o phahameng haholo ha Moroallo o sebetsa | P86 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1°C | 20°C | 3 | ||
| Tekanyetso e nyane ea mocheso o phahameng haholo ha Moroallo o sebetsa | P87 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0°C | 20°C | 1 | ||
| Fane | ||||||||||||||||
| Thempereichara ea ho emisa fan (S5) | F04 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | 50 | ||
| Opereishene ea ho otla ha moea ho lifenehi: 0=Ha ho ts'ebetso ea ho otla ha pelo, 1=Ho thermostat e khaola feela, 2= Ha feela thermostat e khaola nakong ea ts'ebetso ea bosiu. | F05 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 2 | 0 | ||
| Nako ea nako ea fan pulsation (ka nako + nako ea ho se sebetse) | F06 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 mets. | 30 mets. | 5 | ||
| Ka nako ho % ea nako ea nako | F07 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0% | 100% | 100 | ||
| Nako ea nako ea 'nete | ||||||||||||||||
| Linako tse tšeletseng tsa ho qala ho qhibiliha. Ho beha lihora. 0 = TSOANG |
t01 -t06 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | Lihora tse 0 | Lihora tse 23 | 0 | ||
| Linako tse tšeletseng tsa ho qala ho qhibiliha. Litlhophiso tsa metsotso. 0 = TSOANG |
t11 -t16 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 mets. | 59 mets. | 0 | ||
| Oache - Ho beha lihora | t07 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | Lihora tse 0 | Lihora tse 23 | 0 | ||
| Tshupanako – Peakanyo ya motsotso | t08 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 mets. | 59 mets. | 0 | ||
| Oache - Ho beha letsatsi | t45 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 letsatsi | 31 letsatsi | 1 | ||
| Tshupanako – Tlhophiso ya kgwedi | t46 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 khoeli. | 12 khoeli. | 1 | ||
| Oache - Ho beha selemo | t47 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 selemo | 99 selemo | 0 | ||
| Tse fapaneng | ||||||||||||||||
| Ho lieha ha matšoao a tlhahiso ka mor'a ho tima matla | o01 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 metsotsoana | 600 metsotsoana | 5 | ||
| Letšoao la ho kenya ho DI1. Mosebetsi: 0=ha e sebelisoe. 1=boemo ho DI1. 2=ts'ebetso ea monyako ka alamo ha e butsoe. 3=alamo ea monyako ha e butsoe. 4=ho qala ho thetheha ha leqhoa (pulse-signal). 5=feela. switjha ka sehloohong. 6=ts'ebetso ea bosiu 7=thermostat band changeover (kenya r21). 8=ts'ebetso ea alamo ha e koetsoe. 9=ts'ebetso ea alamo ha e butsoe. 10=ho hloekisa khetsi (lets'oao la ho otla ha pelo). 11=ho tsidifatswa ho qobelletsweng ha kgase e tjheswa ke serame, 12=sekoahelo sa bosiu. 15=ho tima sesebelisoa. 20=alamo ya ho dutla ha sehatsetsing. 21=sebetsa likhohola. |
o02 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 21 | 0 | ||
| Aterese ea marang-rang | o03 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 240 | 0 | ||
| Ho bulela / Off switch (Molaetsa oa Pin ea Ts'ebeletso) BOHLOKOA! o61 tlameha e behoe pele ho o04 (e sebelisoa ho LON 485 feela) | o04 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0/Tlokotsi | 1/Ho qala | 0/Tlokotsi | ||
| Khoutu ea ho kena 1 (litlhophiso tsohle) | o05 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 100 | 0 | ||
| Mofuta oa sensor e sebelisitsoeng: 0=Pt1000, 1=Ptc1000, | o06 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0/Pt | 1/Ptc | 0/Pt | ||
| Nako ea ho boloka nako e telele ka mor'a ho qhibiliha ho hokahaneng | o16 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 mets. | 360 mets. | 20 | ||
| Khetha lets'oao bakeng sa pontšo view. S4% (100%=S4, 0%=S3) | o17 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0% | 100% | 100 | ||
| Lethathamo la ho sebetsa la phetisetso ea khatello - min. boleng | o20 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -1 bar | 5 bar | -1 | ||
| Sebaka sa ho sebetsa sa "Premitter" - max. boleng | o21 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 6 bar | 200 bar | 12 |
| Tsoela pele | Khoutu | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Min. | Max. | Fac. | Nnete | |
| Litlhophiso tsa sehatsetsing:
1=R12. 2=R22. 3=R134a. 4=R502. 5=R717. 6=R13. |
o30 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 42 | 0 | ||
| Letšoao la ho kenya ho DI2. Mosebetsi:
(0=ha e sebelisoe. 1=status on DI2. 2=ts'ebetso ea monyako ka alamo ha e butsoe. 3=alamo ea lemati ha e butsoe. 4=ho qala ha leqhoa (pulse-signal). 5=ext. main switch 6=ts'ebetso ea bosiu 7=thermostat band changeover (kenya r21). 8=ts'ebetso ea alamo ha e koetsoe. 9=alamo |
o37 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 21 | 0 | ||
| Tlhophiso ea ts'ebetso ea leseli: 1=Leseli le latela ts'ebetso ea mots'eare / bosiu, 2=Taolo ea leseli ka puisano ea data ka 'o39', 3=Taolo ea leseli ka DI-input, 4=E le "2", empa lebone le khantšitsoeng le sekoaelo sa bosiu se tla buleha haeba marang-rang a khaotsoe ho feta metsotso e 15. | o38 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 4 | 1 | ||||
| Ts'ebetso ea relay e khanyang (feela ha o38=2) E butse=leseli | o39 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0/Tlokotsi | 1/Ho qala | 0/Tlokotsi | ||||
| Mocheso oa terene Ka nako nakong ea ts'ebetso ea letsatsi | o41 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0% | 100% | 100 | |||||
| Mocheso oa terene Ka nako nakong ea ts'ebetso ea bosiu | o42 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0% | 100% | 100 | |||||
| Nako ea mocheso oa terene (Ka nako + Nako ea ho tima) | o43 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 6 mets. | 60 mets. | 10 | |||||
| Ho hloekisa nyeoe. 0=ha ho na ho hloekisoa ha mekotla. 1=Barati feela. 2=Lipoelo tsohle Li tima. | *** | o46 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 2 | 0 | |
| Khetho ea setšoantšo sa EL. Bona hapeview leqepheng la 12 le la 13 | * | o61 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 10 | 1 | |
| Khoasolla sehlopha sa li-setting tse reriloeng esale pele. Bona hapeview leqepheng la 27. | * | o62 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 6 | 0 | |
| Khoutu ea phihlello 2 (phihlello e sa fellang) | *** | o64 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 100 | 0 | |
| Fetola li-setting tsa feme ea balaoli ka li-setting tsa hona joale | o67 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0/Tlokotsi | 1/Ho qala | 0/Tlokotsi | ||
| Letšoao la ho kenya ho DI3. Mosebetsi: (high voltagkenya) (0=ha e sebelisoe. 1=status on DI2. 2=ts'ebetso ea monyako ka alamo ha e butsoe. 3=alamo ea lemati ha e butsoe. 4=qalo ea defrost (pulse-signal). 5=ext. main switch 6=ts'ebetso ea bosiu, 7=thermostat band changeover (activate r21). 8=Ha e so sebelisoe. 9=10=Ha e sebelisoe. 11=ho tsidifatswa ho qobelletsweng ha kgase e tjheswa ke serame, 12=sekoahelo sa bosiu. 13=Ha e sebelisoe. 14=Sehatsetsi se emisitsoe (ho koaleha ka likhoka)). 15=ho tima sesebelisoa. 21=sebetsa likhohola. |
o84 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 21 | 0 | ||
| Taolo ea mocheso oa terene 0=ha e sebelisoe, 1=taolo ea pulse e nang le timer (o41 le o42), 2=taolo ea pulse e nang le ts'ebetso ea phoka |
o85 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 2 | 0 | |||||
| Theko ea phoka moo mocheso oa terene o leng tlase | o86 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -10°C | 50°C | 8 | |||||
| Theko ea phoka moo mocheso oa terene o leng 100%. | o87 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -9°C | 50°C | 17 | |||||
| Phello e tlase haholo e lumelletsoeng ea mocheso oa terene ho% | o88 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0% | 100% | 30 | |||||
| Ho lieha ha nako ho tloha sehatsetsing sa "monyako o bulehileng" ho qala | o89 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 mets. | 240 mets. | 30 | ||
| Opereishene ea fan sehatsetsing se emisitsoeng (ho koaloa ka likhoka): 0 = E emisitsoe (ho fokotsa leqhoa ho lumelletsoe) 1 = Ho matha (ho senya ho lumelletsoe) 2 = E emisitsoe (ho senya ha ho lumelloe) 3 = Ho matha (ho senya ha ho lumelloe) |
o90 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 3 | 1 | ||
| Tlhaloso ea ho bala ka konopo e ka tlase: 1=thempereichara ea setopong, 2=S6 mocheso, 3=S3 mocheso , 4=S4 mocheso |
o92 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 3 | 1 | ||
| Pontšo ea mocheso 1= U56 mocheso oa moea (o behiloe ka bohona ho 1 ts'ebelisong ea 9) 2= mocheso oa sehlahisoa sa u36 |
o97 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 | 1 | ||
| Lifofu tse khanyang le bosiu li hlalositsoe
0: Leseli le tima 'me bosiu bo foufetse bo bulehile ha sesebelisoa se seholo se tiisitsoe |
o98 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 |
| Tsoela pele | Khoutu | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Min. | Max. | Fac. | Nnete | |
| Tlhophiso ea ho fetisoa ha alamo Mohala oa alamo o tla kengoa tšebetsong ha ho letsoa alamo ho tsoa lihlopheng tse latelang: 0 - Alarm relay ha e sebelisoe 1 - Li-alarms tsa mocheso o phahameng 2 - Lialamo tsa mocheso o tlase 4 - Phoso ea kutlo 8 - Kenyelletso ea dijithale e nolofalitsoe bakeng sa alamo 16 - Lialamo tsa defrosting 32 – Mesanyane 64 – Dialamo tsa ente Lihlopha tse lokelang ho kenya alamo ea alamo li tlameha ho hlophisoa ka ho sebelisa boleng ba linomoro e leng kakaretso ea lihlopha tse lokelang ho etsoa. (Mohlala: boleng ba 5 bo tla kenya lialamo tsohle tsa mocheso o phahameng le liphoso tsohle tsa sensor. |
P41 | 1 | 1 | 1 | 1 | 1 | 0 | 127 | 111 | |||||||
| Tshebeletso | ||||||||||||||||
| Mocheso o lekantsoe ka sensor ea S5 | u09 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | *) E ka beoa feela ha taolo e emisitsoe (r12=0) **) E ka laoloa ka letsoho, empa ha feela r12=-1 ***) Ka khoutu ya phihlello 2 phihlello ya dimenu tsena e tla fokotswa Ditlhophiso tsa feme di bontshwa bakeng sa diyuniti tse tlwaelehileng. Linomoro tse ling tsa khoutu li na le litlhophiso tse ikhethileng. |
||||
| Boemo ba ho kenya DI1. ka/1=kwetswe | u10 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Nako ea sebele ea ho qhibiliha (metsotso) | u11 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Mocheso o lekantsoe ka sensor ea S3 | u12 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Boemo ba ts'ebetso ea bosiu (ho buloa kapa ho tima) 1=ho | u13 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Mocheso o lekantsoe ka sensor ea S4 | u16 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Thermostat mocheso | u17 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||||
| Sebelisa nako ea thermostat (nako ea ho pholile) ka metsotso | u18 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Thempereichara ea evaporator outlet temp. | u20 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Mocheso o moholo ho pholletsa le mouoane | u21 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Reference of superheat control | u22 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Tekanyo ea ho bula ea valve ea AKV | ** | u23 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||||
| Khatello e fetohang mouoane Po (leloko) | u25 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Thempereichara ea Evaporator Ho (E baloa) | u26 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Mocheso o lekantsoeng ka sensor ea S6 (mocheso oa sehlahisoa) | u36 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||||||
| Boemo ho tlhahiso ea DI2. ka/1=kwetswe | u37 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Mocheso oa moea . E boima ba S3 le S4 | u56 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Mocheso o lekantsoeng oa thermostat ea alamo | u57 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Boemo ho relay bakeng sa ho pholisoa | ** | u58 | 1 | 1 | 1 | 1 | ||||||||||
| Boemo ho relay bakeng sa fan | ** | u59 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||||
| Boemo ho relay bakeng sa defrost | ** | u60 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Boemo ho relay bakeng sa mocheso oa terene | ** | u61 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||||
| Boemo ho relay bakeng sa alamo | ** | u62 | 1 | 1 | 1 | 1 | 1 | |||||||||
| Boemo ho relay bakeng sa khanya | ** | u63 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||||||
| Boemo ho relay bakeng sa valve e moleng oa ho hula | ** | u64 | 1 | |||||||||||||
| Boemo ho relay bakeng sa compressor 2 | ** | u67 | 1 | |||||||||||||
| Mocheso o lekantsoeng ka sensor ea S5B | u75 | 1 | ||||||||||||||
| Mocheso o lekantsoeng ka sensor ea S3B | u76 | 1 | 1 | |||||||||||||
| Boemo ho relay bakeng sa valve e chesang ea khase- / drain | ** | u80 | 1 | |||||||||||||
| Boemo ho relay bakeng sa ho futhumatsa element ka har'a terei ea marotholi | ** | u81 | 1 | |||||||||||||
| Boemo ho relay bakeng sa lifofu tsa bosiu | ** | u82 | 1 | |||||||||||||
| Boemo ho relay bakeng sa defrost B | ** | u83 | 1 | |||||||||||||
| Boemo ho relay bakeng sa ts'ebetso ea mocheso | ** | u84 | 1 | |||||||||||||
| Bala ka phello ea mocheso oa sebele oa terene | u85 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||||||||
| 1: Thermostat 1 e sebetsa, 2: Thermostat 2 e sebetsa | u86 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Boemo ka matla a phahamengtagke kenya DI3 | u87 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Ho baloa ha li-thermostats ho fokotsehile ka boleng | u90 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Ho baloa ha li-thermostats ka boleng ba 'nete bo khaotsoeng | u91 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Ho baloa ha boemo ba sehatsetsi se feto-fetohang 0: tima. Ts'ebetso ha e so kenngoe 'me ho na le zero set 1: Phoso ea kutlo kapa S3/S4 e khutlisitsoe morao. 2: Tokiso e ntse e tsoela pele 3: Tloaelehile 4: Ho bokellana ha leqhoa ha bobebe 5: Ho bokellana ha leqhoa ha mahareng 6: Leqhoa le leholo |
U01 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Palo ea li-defrosts tse entsoeng ho tloha ha motlakase o qala ho nyoloha kapa ho tloha ha ts'ebetso e etsoa bocha | U10 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Palo ea li-defrosts e tlositsoe ho tloha ha motlakase o qala ho nyoloha kapa ho tloha ha ts'ebetso e etsoa bocha | U11 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Mocheso o lekantsoeng oa thermostat ea alamo karolong ea B | U34 | 1 | 1 | |||||||||||||
| Mocheso oa moea karolong ea B | U35 | 1 | 1 | |||||||||||||
| Molaetsa wa phoso | ||
| Boemong ba phoso, li-LED tse ka pele li tla benya 'me mohala oa alamo o tla kengoa tšebetsong. Haeba u tobetsa konopo e ka holimo boemong bona u ka bona tlaleho ea alamo ponts'o. Ho na le mefuta e 'meli ea litlaleho tsa liphoso - e ka ba alamo e hlahang nakong ea ts'ebetso ea letsatsi le letsatsi, kapa ho ka ba le sekoli ho kenngoeng. Li-alamo li ke ke tsa bonahala ho fihlela tieho ea nako e behiloeng e felile. Ka lehlakoreng le leng, lialamo tsa elektronike li tla bonahala hang ha phoso e etsahala. (Alamo e ke ke ea bonahala ha feela ho na le alamo ea E e sebetsang). Melaetsa e ka hlahang ke ena: |
||
| Mongolo oa Khoutu / Alamo ka puisano ea data | Tlhaloso | Lihlopha tsa li-alarm (P41) |
| A1/— Phahameng t. alamo | Alamo ea mocheso o phahameng | 1 |
| A2/— Tlase t. alamo | Alamo ea mocheso o tlase | 2 |
| A4/— Alamo ea monyako | Alamo ea monyako | 8 |
| A5/— Nako e telele ea ho tšoara | Ts'ebetso ea "o16" e kentsoe tšebetsong nakong ea defrost e hokahaneng | 16 |
| A10/— Enta prob. | Bothata ba ho laola | 64 |
| A11/— Ha ho Rfg. rekisa. | Ha ho sehatsetsi se khethiloeng | 64 |
| A13/— Mocheso o phahameng S6 | Alamo ea mocheso. Phahameng S6 | 1 |
| A14/— Mocheso o tlase S6 | Alamo ea mocheso. S6 e tlase | 2 |
| A15/— alamo ea DI1 | Alamo ea DI1 | 8 |
| A16/— alamo ea DI2 | Alamo ea DI2 | 8 |
| A45/— Boemo ba standby | Boemo ba standby (sehatsetsi se emisitsoeng ka r12 kapa DI input) | – |
| A59/— Nyeoe e hloekile | Ho hloekisa nyeoe. Letšoao le tsoang ho DI | – |
| A70/— Mocheso o phahameng oa S3B | Alamo ea mocheso o phahameng, karolo ea B | 1 |
| A71/— Mocheso o tlase S3B | Alamo ea mocheso o tlase, karolo ea B | 2 |
| AA2/— Refg. dutla | Alamo ea ho lutla ka sehatsetsing | 8 |
| AA3/— alamo ea CO2 | Alamo ea ho lutla ha CO2 | 8 |
| - phoso ea AD | Phoso tšebetsong ea adaptive defrost | 16 |
| - AD Iced | Evaporator e kentsoe leqhoa. Phokotso ea phallo ea moea | 16 |
| - AD ha e fokotsehe. | Defrost ea evaporator ha e khotsofatse | 16 |
| - AD khase ea khase. | Khase ea flash e thehoa ka valve | 16 |
| E1/— Ctrl. phoso | Liphoso ho molaoli | 32 |
| E6/— phoso ea RTC | Sheba oache | 32 |
| E20/— Pe phoso | Phoso ho mochini o fetisang khatello Pe | 64 |
| E24/— Phoso ea S2 | Phoso ho sensor ea S2 | 4 |
| E25/— Phoso ea S3 | Phoso ho sensor ea S3 | 4 |
| E26/— Phoso ea S4 | Phoso ho sensor ea S4 | 4 |
| E27/— Phoso ea S5 | Phoso ho sensor ea S5 | 4 |
| E28/— Phoso ea S6 | Phoso ho sensor ea S6 | 4 |
| E34/— S3 phoso B | Phoso ho sensor ea S3B | 4 |
| E37/— S5 phoso B | Phoso ho sensor ea S5B | 4 |
| —/— Max Def. Nako | Defrost e ile ea emisa ho latela nako ho fapana le, joalo ka ha ho ne ho batloa, ka mocheso | 16 |
| Boemo ba ts'ebetso | (Tekanyo) | |
| Molaoli o feta maemong a mang a laolang moo a ntseng a emetse ntlha e latelang ea taolo. Ho etsa hore maemo ana a "hobaneng ho se letho le etsahalang" a bonahale, o ka bona boemo ba ts'ebetso ponts'o. Tobetsa hakhutšoanyane (1s) konopo e ka holimo. Haeba ho na le khoutu ea boemo, e tla bontšoa skrineng. Likhoutu tsa maemo a motho ka mong li na le meelelo e latelang: | Ctrl. boemo: (E bonts'itsoe lits'ebetsong tsohle tsa menu) | |
| Taolo e tlwaelehileng | S0 | 0 |
| E emetse pheletso ea ho qhibiliha ho hokahaneng | S1 | 1 |
| Ha kompressor e sebetsa e tlameha ho sebetsa bonyane metsotso e x. | S2 | 2 |
| Ha kompressor e emisoa, e tlameha ho ema bonyane metsotso e x. | S3 | 3 |
| Mouoane oa rotha ebe o emela hore nako e fele | S4 | 4 |
| Sehatsetsi se emisitsoe ke main switch. Ekaba ka r12 kapa DI-input | S10 | 10 |
| Sehatsetsi se emisitsoe ke thermostat | S11 | 11 |
| Defrost tatelano. Defrost e ntse e tsoela pele | S14 | 14 |
| Defrost tatelano. Ho lieha ha fan - metsi a khomarela mouoane | S15 | 15 |
| Sehatsetsi se ile sa emisa ka lebaka la ho buloa ho ON kapa ho emisoa ke melaoana | S16 | 16 |
| Monyako o butsoe. DI input e butswe | S17 | 17 |
| Ts'ebetso ea ho qhibiliha e ntse e tsoela pele. Sehatsetsi se sitisoa | S18 | 18 |
| Taolo ea thermostat e feto-fetohang | S19 | 19 |
| Pholiso ea tšohanyetso ka lebaka la phoso ea sensor *) | S20 | 20 |
| Bothata ba taolo mosebetsing oa liente | S21 | 21 |
| Mokhahlelo oa ho qala oa 2. Mouoane o lefisoa | S22 | 22 |
| Taolo e ikamahanyang le maemo | S23 | 23 |
| Ho qala mohato oa 1. Ho tšepahala ha pontšo ho tsoa ho li-sensor ho laoloa | S24 | 24 |
| Taolo ea liphetho ka letsoho | S25 | 25 |
| Ha ho sehatsetsi se khethiloeng | S26 | 26 |
| Ho hloekisa nyeoe | S29 | 29 |
| Pholiso e qobelloang | S30 | 30 |
| Ho lieha ho hlahisa lihlahisoa nakong ea ho qala | S32 | 32 |
| Mosebetsi oa mocheso r36 o sebetsa | S33 | 33 |
| Ho koaloa ha sesebelisoa | S45 | 45 |
| Moroallo oa phophoma. mosebetsi o sebetsa | S48 | 48 |
| Lipontšo tse ling: | ||
| Thempereichara ea defrost e ke ke ea hlahisoa. Ho na le ho emisa ho ipapisitse le nako | eseng | |
| Qhoboso e ntse e tsoela pele/ Ho tsidifala ha pele ka mora ho qhibidiha | -d- | |
| Password e hlokahalang. Beha phasewete | PS | |
| Taolo e emisoa ka main switch | TLOA |
*) Pholiso ea tšohanyetso e tla sebetsa ha ho se na lets'oao le tsoang ho sensor e hlalositsoeng ea S3 kapa S4. Taolo e tla tsoela pele ka ho fokotsa sekhahla se ngolisitsoeng. Ho na le litekanyetso tse peli tse ngolisitsoeng - e 'ngoe bakeng sa ts'ebetso ea letsatsi le e' ngoe bakeng sa ts'ebetso ea bosiu.
Puisano ya data
Bohlokoa ba lialamo ka bomong bo ka hlalosoa ka maemo. Litlhophiso li tlameha ho etsoa sehlopheng sa "Alarm destinations"
| Litlhophiso ho tloha Motsamaisi oa sistimi |
Litlhophiso ho tloha AKM (sebaka sa AKM) |
Log | Molaetsa oa alamo | Romela ka Marang-rang |
||
| E seng | Phahameng | Tlase-Hodimo | ||||
| Phahameng | 1 | X | X | X | X | |
| Hare | 2 | X | X | X | ||
| Tlase | 3 | X | X | X | ||
| Loka feela | X | |||||
| E holofetse | ||||||
LBH
- Ke mofuta ofe oa thapo o lokelang ho sebelisoa bakeng sa likhokahano tsa likhokahano tsa data?
A: Likhokahano tsa data tsa MODBUS, DANBUSS, le RS485 li tlameha ho lumellana le litlhoko tsa likhokahano tsa likhokahano tsa data. Sheba lingoliloeng: RC8AC bakeng sa lintlha. - Ke balaoli ba bakae ba ka amohelang lets'oao ho tsoa ho mochini o le mong oa khatello?
A: Letšoao le tsoang ho mochine o le mong oa khatello le ka amoheloa ke balaoli ba 10, ha feela ho se na khatello e kholo e fokotsehang pakeng tsa li-evaporator tse lokelang ho laoloa. - Litlhaloso tsa phepelo ea motlakase ke life?
A: Sehlahisoa se hloka phallo ea voltage ea 230 V ac, 50/60 Hz.
Litokomane / Lisebelisoa
 |
Danfoss AK-CC 550B Case Controller [pdf] Litaelo AK-SM..., AK-CC 550B, AKA 245 version 6.20, AK-CC 550B Case Controller, AK-CC 550B, Case Controller, Controller |
