Danfoss 3060 Electro Mechanical Programmer
Litaelo tsa ho Hloma
Ka kopo Hlokomela:
Sehlahisoa sena se lokela ho kenngoa feela ke setsebi sa motlakase se koetlisitsoeng kapa se kenyang mocheso se nang le bokhoni, 'me se lokela ho lumellana le khatiso ea hajoale ea melaoana ea IEEE ea lithapo.
Tlhaloso ea lihlahisoa
| Tlhaloso | |
| Phepelo ea motlakase | 230 ± 15% Vac, 50/60Hz |
| Ketso ea ho fetola | 2 x SPST, mofuta oa 1B |
| Fetolela lintlha | Max 264 Vac, 50/60Hz, 3(1) A |
| Ho nepahala ha nako | ± 1 mots/khoeli |
| Reite ea sebaka | IP30 |
| Max. mocheso o phelang | 55°C |
| Litekanyo, mm (W, H, D) | 102 x 210 x 60 |
| Mokhoa o hlophisitsoeng | EN 60730-2-7 |
| Kaho | Sehlopha sa 1 |
| Laola Boemo ba Tšilafalo | Degree 2 |
| Rated Impulse Voltage | 2.5kV |
| Teko ea Khatello ea Ball | 75°C |
Ho kenya
- Tlosa setaele se tlase. Beha lipompo tse 'nè holim'a mohala o ka holimo. Unscrew 4BA screw ebe o tlosa mokotla o ka ntle.
- Fokotsa li-screws tse peli tse bolokang plug-in module ho backplate le ho arola module ho tloha mokokotlong ka ho hulela holimo.
- Lokisa letlapa la mokokotlo leboteng (ho lokisa likoti tse 3).
- Ha u bua ka litšoantšo tsa lithapo tse ka tlase le tse fapaneng, etsa likhokahano tsa motlakase joalo ka ha ho bonts'itsoe (ha ho hlokahala). Lits'oants'o li bonts'a hore litheminale 3 le 5 ha lia hokahana ka hare ho moetsi oa lenaneo 'me ka hona li ka sebelisoa e le liteishene tsa terata tse bolokiloeng ha ho hlokahala.
- Ho kenya habonolo ho ka finyelloa ka tšebeliso ea Danfoss Randall Wiring Centre e fumanehang ho Bahoebi ba bangata ba Lihahi le Bahlahisi.
HLOKOMELA: Haeba Setsi sa Wiring se sebelisoa latela litaelo tsa ho kenya tse kenyellelitsoeng yuniti eo eseng litšoantšo tse latelang tsa likhoele. - Sireletsa li-cable cores tlas'a cable clamp.
Wiring
WIRING - SYSTEM E TSOANG KA FELLO
HLOKOMELA: Yuniti ena HA E lokele ho sebelisoa ka li-valve tsa libaka tse tsamaeang ka botlalo tse hlokang mats'oao a motlakase a ON le OFF ha a sebelisoa potolohong ea ho futhumatsa.
WIRING – GRAVITY TSELA TSA METSI A TŠEPANG
Litaelo tsa mosebelisi
Moqapi oa hau
- Lenaneo la 3060 le u lumella ho chencha metsi a hau a chesang le ho futhumatsa le ho tima ka linako tse u tšoanelang.
- Litheipi tse 'ne tsa ho daela nako li u lumella ho etsa qeto ea hore na u batla hore metsi a chesang le a futhumatsang a kene neng letsatsi le letsatsi. Lenaneo le fana ka linako tse 2 ON le linako tse 2 OFF ka letsatsi.
- U sebelisa mohala o tlase u ka khetha mokhoa oa ho laola Mocheso oa hau le Metsi a Chesang, ebang ke ka linako tse behiloeng, ON ON, kamehla OFF (e 'ngoe le e 'ngoe ka metsoako e fapaneng). Nakong ea lehlabula mocheso o bohareng o ka tima, ha o ntse o laola metsi a chesang ka linako tse behiloeng.
Ho hlophisa yuniti
Ho na le TAPPETS tse 'ne ho daele ea hau ea nako, tse peli tse khubelu le tse peli tse putsoa:
- lipompo tse khubelu ke li-switches tsa ON
- litheipi tse putsoa ke li-switches tse OFF
- Tšoara konopo e bohareng e ntšo le silevera ka letsoho le le leng 'me u tsamaise theipi e khubelu e tšoailoeng 'A' ho ea ka nako eo u batlang hore HOTLOA/HOT WATER ea hao e bule hoseng.
NB. u ka 'na ua fumana lipompo li le thata haholo, kahoo u ka tlameha ho li sutumelletsa ka thata ho li tsamaisa. - U ntse u tšoere konopo e bohareng, tsamaisa theipi e putsoa e tšoailoeng 'B' ho isa nakong eo u batlang hore HOTLOA/HOT METSI a hao a tima hoseng.
- U ka seta lipompo tsa hau tse ling tse peli ka tsela e ts'oanang ho seta METSING ea hau ea HO FUthumala / TŠEBELETSO bakeng sa thapama kapa mantsiboea.
EXAMPLE
(NB. Oache e maemong a lihora tse 24)
Haeba o batla hore ho UTLWE ho futhumatsa le metsi a chesang pakeng tsa 7am le 10am le HO BUA hape pakeng tsa 5pm le 11pm, beha lipompo ka tsela e latelang:
- A ho 1st KA nako = 7
- B ho 1st OFF nako = 10
- C ho 2nd KA nako = 17
- D ka 2nd OFF nako = 23
Ho beha Oache
Fetola mohala ho fihlela nako e nepahetseng e hlophisitsoe ka letheba le ngotsoeng TIME
NB. oache e maemong a lihora tse 24
HOPOLANG
U tla tlameha ho seta nako bocha kamora ho khaoha ha motlakase le ha lioache li fetoha nakong ea Selemo le Hoetla
Ho sebelisa Programmer
Sekhetho se sebelisoa ho khetha hore na 3060 e laola metsi a hau a chesang le ho futhumatsa joang. Metsi a futhumatsang le a chesang a ka sebetsoa hammoho ka metsoako e fapaneng, kapa metsi a ka laoloa ka boona (ke hore nakong ea lehlabula ha ho hlokahala feela metsi a chesang).
Ho na le maemo a ts'eletseng ao switjha e khethang e ka beoang ho ona.
- H OFF / W OFF
Metsi a futhumatsang le a chesang a tla lula a TSHOHILE ho fihlela o fetola maemo. - H HABELI / W HABELI
Boemong bona Metsi a futhumatsang le a chesang a tla tla ka bobeli a be a tima ho latela linako tseo u li lokiselitseng ( ON ho A, OFF ho B, ON ho C, OFF ho D). - H KA NAKO / W HAEBA
Tlhophiso ena e tlola litheipi tsa B le C, kahoo Heating le Metsi a Chesang li tla BUA ka nako e tšoailoeng ka tappet A 'me li tla lula li le teng ho fihlela nako e tšoailoeng ka tappet D. Litšebeletso ka bobeli li tla tima ho fihlela 'A' letsatsing le hlahlamang. - H ON / W ON
Mona ke boemo ba 'CONSTANT' 'me sebatli se tla lula se ONTSE ka ho sa feleng bakeng sa ho futhumatsa le ho futhumatsa Metsi a chesang, ho sa tsotelehe boemo ba lipompo. - H HABELI / W HAE
Boemong bona mocheso o tla tla 'me oa tima ho latela linako tseo u li lokiselitseng (ON ho A, OFF ho B, ON ka C, OFF ho D).
Metsi a chesang a tla fihla ho A 'me a lule ho fihlela D. - H OFF / W HABELI
Boemong bona Heating e tla tima ka ho sa feleng 'me Metsi a Chesang a tla tla le ho tima ho ea ka linako tseo u li lokiselitseng (ON ho A, OFF ho B, ON ho C, OFF ho D).
Hlokomela:
Haeba metsi a chesang a hlokahala letsatsi lohle ha ho futhumatsa ho koetsoe (e leng ho tima mocheso, metsi hang)
- Fetolela sesebelisoa sa ho khetha ho 'H habeli / W hang' ebe u theola thermostat ea kamore hore e be maemong a eona a tlase.
- Haeba ho hlokahala metsi a chesang ka linako tsohle ha ho futhumatsa (ke hore, ho tima mocheso, ho butsoe metsi)
- Fetolela sesebelisoa ho 'H on / W on' 'me u fetole thermostat ea kamore hore e be maemong a eona a tlase.
U ntse u na le mathata?
Letsetsa moenjiniere oa sebaka sa heno:
- Lebitso:
- Mohala:
Etela ea rona websebaka: www.heating.danfoss.co.uk
Romela lefapha la rona la tekheniki lengolo-tsoibila: ukheating.technical@danfoss.com
Letsetsa lefapha la rona la tekheniki 0845 121 7505
(8.45-5.00 Mon-Labone, 8.45-4.30 Labohlano)
Bakeng sa khatiso e kholo ea litaelo tsena ka kopo ikopanye le Lefapha la Litšebeletso tsa Papatso ho 0845 121 7400.
- Danfoss Ltd
- AmpHill Road Bedford
- MK42 9ER
- Mohala: 01234 364621
- Fax: 01234 219705
LBH
- P: Na nka kenya sehlahisoa see ka bonna?
- A: Sehlahisoa sena se lokela ho kenngoa feela ke setsebi sa motlakase se koetlisitsoeng kapa se kenyang se futhumatsang mocheso ho latela litataiso tsa polokeho.
- P: Ke linako tse kae tsa ON le OFF tse ka behiloeng ka letsatsi?
- A: Lenaneo le lumella ho beha linako tse 2 ON le linako tse 2 OFF ka letsatsi bakeng sa metsi a chesang le ho futhumatsa.
- P: Ke lokela ho etsa eng haeba lipompo li le thata?
- A: Haeba u fumana li-tappets li le thata, li hatelle ka thata ho li lokisa ho ea ho li-setting tseo u li batlang.
Litokomane / Lisebelisoa
 |
Danfoss 3060 Electro Mechanical Programmer [pdf] Tlhophiso Tataiso 3060 Electro Mechanical Programmer, 3060, Electro Mechanical Programmer, Mechanical Programmer, Programmer |
