DACON
MOSEBETSI OA KHOOHO MAPI
BAKENG SA LIHLOKO TSOHLE TSA HAO TSA HLAHLOBO
'Mapa oa DACON o iketsetsang kutu e sebelisa sesebelisoa se phahameng sa Ultrasonic Flaw Detector se nang le Full Imaging System e hahiloeng ho eona. Sistimi e khona ho iketsetsa 'mapa le ho rekota ka mokhoa o ikhethileng oa ho nepahala ho phahameng. E loketse mesebetsi ho tloha ho 'mapa oa kutu ho ea ho litlhahlobo tsa sepakapaka holim'a li-composite.
DACON e sebelisa RAPTOR flaw detector e leng all-in-one high resolution ultrasonic thickness gauge, ultrasonic flaw detector le imaging flaw detector e khonang ho khanna mefuta e mengata ea mechine ea matsoho le ea othomathike.
DACON e sebelisa li-scanner tsa RCA-10 & RCA-18 tse khonang ho hlahloba ka bo eona libaka tse kholo holim'a likepe tsa khatello, tanka kapa liphaephe tsa li-diameter tsohle ka lebelo le phahameng.
Bokhoni bo Tsoetseng Pele ba ho Etsa Litšoantšo
Sistimi e tla le lisebelisoa tse felletseng tsa software bakeng sa tlhahlobo e tsoelang pele ea liphetho, ho kenyeletsoa likarolo tsa B-Scan, litšoantšo tsa 3D, lisebelisoa tsa lipalo bakeng sa boholo ba liphoso le tse ling tse ngata.
Advantages
- Ts'ebetso ea software le tlhahiso ea data li tla lumella tlhahlobo e bonolo, e hlahisang tlhahlobo e nepahetseng le e phetoang bakeng sa ho lekola libaka tse mahlonoko.
- Ka ho iketsetsa ka botlalo, phihlello ea libaka tse hole e ka finyelloa ho tloha fatše ntle le tlhokahalo ea scaffolding.
- Libaka tse kholo li ka hlahlojoa ka lebelo le phahameng le ka ho nepahala le ho pheta-pheta.
| Kakaretso | Sephutheloana | Yuniti ea Raptor, betri ea Li-Ion, tjhaja ea AC (110-240V), Buka ea mosebelisi, COC, Case ea Pelican | ||
| Pontšo | Letsatsi le baloang VGA | 60Hz | 640 x 480 pixels | 3.4in x 4.55in (86mm x 116mm) | |||
| Litekanyo | 5.75in x 9.5in x 3.0in, 5.6lbs | 146mm x 241mm x 76mm, 2.54kg | |||
| Mohloli oa matla | Betri ea Li-ion e ka nkeloang sebaka (boipuso ba lihora tse 8) kapa matla a AC | |||
| Mocheso oa ho sebetsa | 32 F - 122 F (0 °C ho isa ho 50 °C) | |||
| Mocheso oa polokelo | -4 F - 140 F (-20 °C ho isa ho 60 °C) | |||
| Mofuta oa sehokelo | BNC e habeli | |||
| Transducer | Mofuta | Ntho e le 'ngoe le tse peli | Kopana, ho lieha, ho qoelisoa, ho kota, ho fetisa | ||
| Khafetsa | 0.5 MHz - 30 MHz | |||
| Tshebetso | Qeto | 0.0001 ho (0.0025mm) | ||
| Lebelo | 0.0010 ho / rona - 1.0000 ho / rona | |||
| Liheke | Liheke tsa botenya | IP-lst, lst-2nd, 2nd-3rd | Ho thibela IP, ho thibela IF, ho thibela IF-1st, ho thibela lst-2nd | ||
| Linear flaw liheke | Liheke tse 2 tse ikemetseng tsa mela | +- dB ho tloha hekeng, % ea FSH, % ea boemo ba heke | |||
| DAC liheke tse nang le liphoso | DAC curve (20-point) | + -3dB mela (JIS) | + -6dB mela (ASME) | -6/-l4dB (ASME 3) | |||
| Mefuta ea alamo | E utloahalang le e bonoang | Botenya bo phahameng, bo tlase, ka bobeli | Ampboholo bo phahameng, bo tlase | |||
| Mekhoa | Mokhoa oa TCG | TCG (Nako e Lokisitsoeng ea Nako) e fumaneha ka mekhoa eohle | ho seta ka othomathiki kapa ka letsoho | ||
| Shear wave mode | Letlapa le bataletseng kapa phala (CSC - Curved Surface Correction) | Mefuta eohle ea liheke e fumaneha | |||
| Mokhoa oa AWS-code | Lipalo tsa AWS D1.1/1.5 (A, B, C, D boleng bo baloang ka bohona) | |||
| Pulser/ Moamohedi | Mofuta oa pulse | Spike kapa Square tunable wave pulser | ||
| Pulse bophara | 20ns - 10.000ns (mokhoa oa square pulse feela) | |||
| Pulse volts | 50 ho 450V | |||
| PRF | 10Hz - 5000Hz | |||
| Moamoheli | Fumana | 0 - 100dB (ho fihla ho 0.1 increments) | ||
| Dampng | 25Ω – 375Ω (8dampmaemo a holimo) | |||
| Tokiso | BB, 0.5 MHz, 1 MHz, 2.5 MHz, 5 MHz, 10 MHz, 15 MHz | |||
| Bophahamo ba motlakase | Moqotetsane kapa Bophara | |||
| Bontša mekhoa | RF, +HW, -HW, FW | |||
| Polokelo | Ka hare | 2GB | ||
| Kantle | Karete ea SD ea 2GB (e kenyelelitsoe) | |||
| Khokahano | PC Software | Windows e thehiloeng RAPWIN software bakeng sa tlhahlobo ea litšoantšo (e kenyelelitsoe) | ||
| Ho nahana | Mofuta oa scan | Nako kapa boemo bo kentsoeng B-Scan, boemo bo kentsoeng C-Scan | ||
| Lisebelisoa | Liskena tsa letsoho | Armadillo (1-D) | Li-scanner tse tsamaeang ka likoloi | CrossScan |
| StringScan 18×18, 24×24 | RCA-10, 18 | |||
| SlideSkena | Tunnel Scan I, II, III | |||
| Li-scanner tse ikhethileng | NDT Systems e kentse letsoho litharollong tse ngata tse ikhethileng tsa skena | |||
RCA-10 & RCA-18 scanner
- Automatic Magnetic attached cantilever arm Scanner
- Tlhahlobo ea lipeipi tsa likhato tse 360
- Mabili a makenete
- Lijo tsa metsi
- Betri e sebetsa
- Tlaase profile bakeng sa tshebediso pakeng tsa dipeipi
- Bolelele ba ho skena
- RCA-10 = 10in. (0.25m)
- RCA-18 = l8in.(0.46m)
- Qeto : X = 0.040in.(1.0mm), Y = 0.020in.(0.5mm)
E sebetsa le : Raptor Imaging flaw detector
Litokomane / Lisebelisoa
 |
DACON Automated Corrosion Mapping [pdf] Litaelo 'Mapa oa Corrosion o Ikemetseng, 'Mapa oa Corrosion, 'Mapa |
