hona joale IND467 Lumination LED Luminaire LPL Series Controller Lebokose Tataiso ea ho kenya Tataiso

PELE O QALA
Bala litaelo tsena ka botlalo le ka hloko.

 TLHOKOMELO

KOTSI TŠOHO MOTLATSI

• Tima motlakase pele u hlahloba, ho kenya kapa ho tlosoa.
• Sebaka sa motlakase se fatše hantle.

KOTSI MOLLO

• Latela tsohle NEC le likhoutu tsa lehae.
• Sebedisa feela terata e dumeletsweng ke UL bakeng sa dikgokelo tsa ho kenya/output.
  Bonyane boholo ba 18 AWG (0.75mm2).
• Se ke oa kenya mokelikeli ka har'a lisenthimithara tse 3 (76 mm) ho tloha holimo ho luminaire.

Boloka Litaelo Tsena
Sebelisa feela ka mokhoa o reriloeng ke moetsi.
Haeba u na le lipotso, ikopanye le moetsi.

Sesebelisoa sena se lumellana le Karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang: (1) Sesebelisoa sena se kanna sa se ke sa baka tšitiso e kotsi, 'me (2) sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng.
KA NAKO ICES-005(A)/NMB-005(A)

Hlokomela: Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa A, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi ha thepa e sebelisoa sebakeng sa khoebo. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela bukana ea litaelo, e ka baka kotsi.
tšitiso ea likhokahano tsa seea-le-moea. Ho sebetsa ha thepa ena sebakeng sa bolulo ho ka 'na ha baka tšitiso e kotsi moo mosebedisi a tla hlokoa ho lokisa tšitiso eo ka litšenyehelo tsa hae.

Lokisetsa Wiring ea Motlakase 

Litlhoko tsa Motlakase

• Leseli la LED le tlameha ho hokahana le phepelo ea mantlha ho latela litekanyetso tsa eona ho leibole ea sehlahisoa.
• Wiring ea sehlopha sa 1 e lokela ho lumellana le NEC.

Litaelo tsa ho Fokotsa

• Ho theoa le ho tlamahanngoa ha tsamaiso ka kakaretso ho tla etsoa ho latela khoutu ea motlakase ea lehae ea naha moo lebone le kentsoeng teng.

Lisebelisoa le Lisebelisoa li Hlokahala

• Screwdriver
• Likhokahano tsa UL tse thathamisitsoeng ka NEC/CEC bakeng sa boholo ba khoebo ea conduit ½” kapa ¾”
• Lihokelo tsa terata tse thathamisitsoeng ka UL

Karolo ea boitsebiso

LPL22A/ LPL24A/LPL24B/LPL22B

1. Tlosa motlakase o kenang setsing sa phanele.
   
2. Bula lesoba la ho kokota moo motlakase o ka lokisoang teng, ebe o kenya mochini o kenang ka har'a lebokose la taolo (Conduit fitting e ne e le ka mokotleng oa lisebelisoa tsa taolo).
   
3. Tlosa li-screws ka morao ho luminaire.
   HLOKOMELA: Boloka li-screws hore u li sebelise hamorao.
   
4. Kenya conduit e loketseng lebokoseng la mokhanni ebe o screw nut ho li hokahanya. Etsa bonnete ba lithapo tsohle tsa motlakase
   li kenngoa hammoho ka lebokoseng la mokhanni ebe li hokela lithapo ho ea ka setšoantšo se nepahetseng sa wiring.
   
   Bakeng sa LPL22B/ LPL24B:
   Kenya sebaka sa hona joale sa EMBB LED input/output wire connector ka 95028316(Female), 95028316(Monna) bakeng sa EMBB mofuta le IOTA CP Series EMBB e nang le mofuta oa Taolo.
5. Tlosa li-screws 'me u bule sekoahelo sa lebokose la taolo ka ho se theola ka thōko.
   HLOKOMELA: Boloka li-screws hore u li sebelise hamorao
   
6. Lokisa lebokose la taolo ka morao ho lebone u sebelisa masoba a mane a teng le li-screw ho tloha mohato oa 3.
   
7. Etsa likhokahano tsa mohala oa phepelo ka har'a kopano ea lebokose la taolo. Sheba setšoantšo se loketseng sa lithapo leqepheng la 8-9 ho fumana likhokahano tse nepahetseng.
   
8. Kenya sekoaelo sa lebokose la taolo ho khutlela lebokoseng la taolo ka li-screw le li-washer tsa linaleli.
   Beha le ho kenya sensor siling u sebelisa lisebelisoa tse fanoeng

LPL22C/ LPL24C

1. Tlosa motlakase o kenang setsing sa phanele.
   
2. Tlosa screw ebe u bula sekoaelo sa lebokose la mokhanni ka ho se thellela holimo,
   ebe o bula lesoba la ho kokota ❶ ❷ bakeng sa None-EMBB kapa ❶ ❷ ❸ bakeng sa EMBB, ka mor'a moo, etsa lithapo tsena ho tloha ho mokhanni ka lesoba la ho kokota:
   
   1. Mola oa ho kenya(L, N), Ho theola
   2. Cable e nyenyefatsang (Violet, Grey)
   3. Mohala oa LED(Sephetho sa LED, Kenyo ea LED): Feela bakeng sa EMBB
3. Kenya sekoaelo sa lebokose la bakhanni 'me u le lokise ka screw ha u ntse u boloka lithapo tsena ka ntle ho lebokose la mokhanni.
   
4. Tlosa li-screw 'me u bule sekoahelo sa lebokose la molaoli ka ho le suthela ka thōko, ebe u bula lesoba la ho kokota ❶ ❷ bakeng sa None-EMBB kapa ❶ ❷ ❸ bakeng sa EMBB.
   
   HLOKOMELA: Boloka li-screws hore u li sebelise hamorao
5. Kenya lebokose la taolo ka morao ho lebone ka ho boloka likoti tse 2 tsa lebokose la taolo le tsamaisanang le linate tse 2 tsa matlo a luminaire ka morao, ebe u beha likoti tse kokotang li lumellane pakeng tsa lebokose la taolo le lebokose la mokhanni ha u ntse u etsa lithapo ka tsona, ebe u lokisa lebokose la taolo le M4 * Li-screw tse 6 (li-screw tsa M4 * 6 li ka mokotleng oa lisebelisoa tsa taolo). Kenya li-bushing ka mekoting ea ho kokota, 'me lithapo li kene ka har'a tsona (Bushings li ka mokotleng oa lisebelisoa tsa taolo).
   
6. Mofuta oa None-EMBB:
   Etsa bonnete ba hore lithapo tsohle tsa motlakase li hoketsoe ho latela setšoantšo se nepahetseng sa lithapo leqepheng la 8-9.
   
   Mofuta oa 6-B EMBB:
   Taba ea pele, khaola lithapo tsa LED(LED Output, LED Input) bohareng, hlobola malebela a terata ka 10mm.
   Taba ea bobeli, tlosa likhokahano tsa boemo ba WAGO 2 ho lithapo tsa EMBB tsa LED joalo ka kaholimo ho le letona view.
   Ntlha ea boraro, hokela lithapo tsa LED ho latela sets'oants'o se nepahetseng sa lithapo leqepheng la 8-9 le linate tsa terata tse thathamisitsoeng ka UL.
   Qetellong, etsa bonnete ba hore lithapo tsohle tsa motlakase li hokahantsoe ho latela setšoantšo se nepahetseng sa lithapo.
   
   Tlhokomeliso:
   Etsa bonnete ba hore likhoele tsa EMBB li nepahetse ho latela setšoantšo se nepahetseng sa lithapo leqepheng la 8-9, ho seng joalo tšebetso ea EMBB e tla hloleha.
7. Etsa likhokahano tsa mohala oa phepelo ka har'a kopano ea lebokose la taolo. Sheba setšoantšo se nepahetseng sa lithapo ho fumana likhokahano tse nepahetseng. Lokisa sekoaelo sa lebokose la taolo ka ho sebelisa li-screw ho tloha mohato oa 4.
   

LPL22D/ LPL24D

1. Tlosa motlakase o kenang setsing sa phanele.
   
2. Bakeng sa mofuta oa mantlha, tlosa screw (sekoahelong sa Jbox) 'me u bule masoba ①②.
   Nka lithapo le lithapo tse fifalang ho tsoa ho mokhanni ka likoti tse kokotang:
   1. Lithapo tsa ho kenya (L, N), Ho theola fatše;
   2. Lithapo tse fifalang (Violet, Pinki) haeba li hloka ts'ebetso ea ho fifala (Ka boikhethelo)
      
      Kenya sekoaelo ho khutlela lebokoseng la mokhanni 'me u le lokise ka screw 'me u boloke lithapo tsena ka ntle ho lebokose la mokhanni
      Bakeng sa mofuta oa sensor, tlosa sekoahelo se holim'a sekoaelo sa ntlo, 'me u bule lesoba ③
      Nka kotopo e telele ho tloha lebokoseng la taolo 'me u e kenye le ho lekana ha eona ho lesoba ③.
      Hokela lithapo tsa L/N/G ka lihokelo tse seng li behiloe.
      Kenya sekoaelo hape ho Interface-Housing 'me u e lokise ka li-screw.
      
3. Lokolla li-screws ebe u bula sekoaelo sa lebokose la molaoli ka ho se thellela ka thoko, ebe,
   Bakeng sa mofuta oa mantlha, bula masoba ④⑤ bakeng sa lithapo tsa L/N/G le dimming.
   Bakeng sa mofuta oa sensor, bula masoba ⑥ bakeng sa lithapo L/N/G.
   HLOKOMELA: Boloka li-screws hore u li sebelise hamorao.
   
4. Feela bakeng sa EMBB: Bula masoba a kokotang ⑦ of Control-Box. Ebe u kenya conduit le ho lekana ha eona ho likoti tse kokotang tsa lebokose la taolo. Ho kenya likotopo ho ne ho le ka mokotleng oa lisebelisoa tsa taolo.
   Tlosa screw ebe u bula sekoaelo se senyenyane, ebe u khaola lithapo libakeng tse ⑧⑨.
   ⑧ Lithapo tse tšoeu (LED-).
   ⑨ Lithapo tse khubelu (LED+).
   
   
   HLOKOMELA: Boloka li-screws hore u li sebelise hamorao. Tlhokomeliso: U se ke ua khaola lithapo tse putsoa!
5. Feela bakeng sa EMBB:
   Pele, seha lithapo tsa LED (tse khubelu, tse tšoeu) joalo ka mohato ④, ebe o hlobola malebela a terata ka 10mm.
   Ea bobeli, tlosa likhokahano tsa boemo ba WAGO 2 ho lithapo tsa EMBB tsa LED (tse khubelu le tse putsoa) joalo ka ho le letona view. Ea boraro, lithapo tse 4 tsa khoele (Red, Blue, Red/white, Blue/white) ka kotopo e tsoang lebokoseng la taolo, ebe u li hokela ka likhoele tse tsoang ho mokhanni le enjene e bobebe ho latela sets'oants'o se nepahetseng sa terata leqepheng la 8-9 le terata e thathamisitsoeng ea UL. linate.
   Ea bone, lokisa ntlha e 'ngoe ea conduit ho sekoahelo se senyenyane sa thepa.
   Qetellong, busetsa lithapo le likhokahanyo ka har'a phaposi, ebe u khutlisetsa sekoaelo se senyenyane lebokoseng la mokhanni ka ho tiisa sekurufu.
   Tlhokomeliso: Etsa bonnete ba hore likhoele tsa EMBB li nepahetse ho latela setšoantšo se nepahetseng sa lithapo leqepheng la 9-10, ho seng joalo tšebetso ea EMBB e tla hloleha.
   
6. Kenya lebokose la taolo ka morao ho lebone ka ho boloka likoti tse 2 tsa lebokose la li-control tse tsamaellanang le linate tse 2 tse behiloeng pele ka morao ho ntlo ea luminaire. Lokisetsa masoba a lebokose la taolo le lebokose la mokhanni 'me u boloke lithapo ka har'a masoba. Lokisa lebokose la taolo le li-screw tsa M4 * 6 (li-screws tsa M4 * 6 li ka mokotleng oa lisebelisoa tsa taolo).
   For Basic version, kenya lihlahla ka mekoting, 'me u boloke lithapo li feta ho tsona. Lihlahla li ka mokotleng oa lisebelisoa tsa taolo.
   Bakeng sa mofuta oa Sensor, kenya conduit e telele le lisebelisoa tsa eona ka har'a masoba ⑥ ea lebokose la taolo.
   
   
7. Kenya kotopo le ho lekana ha eona ho knockout e loketseng ⑩ kapa tse ling tse kokotang bakeng sa phepelo ea motlakase. Hokela mohala oa phepelo ea motlakase ho likarolo tse kahare ho kopano ea lebokose la taolo ho latela setšoantšo sa wiring leqepheng la 9-10. Etsa bonnete ba hore lithapo tsohle tsa motlakase li hoketsoe ka nepo ho latela setšoantšo se nepahetseng sa lithapo leqepheng la 9-10

   
8. Lokisa sekoaelo sa lebokose la taolo ka li-screw le li-washer tsa linaleli.
   

Litšoantšo tsa Wiring

0-10V Dimming: 347V Version

0-10V Dimming: EMBB Version

Laola ka Driver Standard

Emergency Bypass with Controls

IOTA CP Series EMBB e nang le Taolo

Boitsebiso ba Molaoli

Daintree WFA Controller

LABELS: Lileibole li ka mokotleng o monyenyane oa polasetiki 'me li ka bonoa e ka ba karolong ea taolo ka boeona kapa haufi le li-labels tse ka ntle ho leseli. Li-label tsena li ka siuoa sebakeng se le seng se bonahalang, kapa li ka behoa sebakeng seo ho leng bonolo ho se fumana bakeng sa ho tsebahatsa habonolo.

Daintree Module G Controller

LABELS: Lileibole li ka mokotleng o monyenyane oa polasetiki 'me li ka bonoa e ka ba karolong ea taolo ka boeona kapa haufi le li-labels tse ka ntle ho leseli. Li-label tsena li ka siuoa sebakeng se le seng se bonahalang, kapa li ka behoa sebakeng seo ho leng bonolo ho se fumana bakeng sa ho tsebahatsa habonolo.

TŠEBELETSO BYPASS KHETHA

Hokela lithapo tse BLACK le RED ho tloha ho tse ling ho ea ho tse tloaelehileng, tseo e seng tsa tšohanyetso tsa lithapo tsa AC ho bona hore na sesebelisoa se maemong a tšohanyetso.

LINTLHA TSEO:

•  Sheba setšoantšo ho ea ho le letona bakeng sa mebala le litlhaloso.
• Maikutlo a ho itlhahloba a tlameha ho tsoa potolohong ea lekala e le 'ngoe le ho chesa ho tloaelehileng.
•  Ha ho sesebelisoa sa tlhahlobo ea remoutu.
• Kenyeletso ea remoutu e etsoa ha ho kenya ho koetsoe.
  Bakeng sa lintlha tse ling mabapi le yuniti ea bypass, sheba ho
  www.functionaldevices.com

 

Litokomane / Lisebelisoa

Hona joale IND467 Lumination LED Luminaire LPL Series Controller Lebokose [pdf] Tlhophiso Tataiso IND467, Lebokose la Taolo ea Leseli la Leseli la Leseli la Leseli la LPL, Lebokose la Molaoli oa Letoto la IND467 Lumination LED Luminaire LPL Series Controller Box

Litšupiso

• Bukana ea Mosebelisi