CONRAD 2734647 Sensor ea Teko ea Turbidity ea Metsi bakeng sa Arduino

Tlhahisoleseding ya Sehlahiswa

The Water Turbidity Test Sensor bakeng sa Arduino ke sensor e etselitsoeng ho lekanya moferefere oa metsi. E ka kopanngoa le boto ea Arduino 'me e sebelisetsoa ho lekola ho hlaka ha metsi lits'ebetsong tse fapaneng.

Motlakase Characteristic Curve:

Phallo ea sensor voltage e fapana ka tsela e fapaneng le boleng ba turbidity. Ha boleng ba turbidity bo phahame, molumo oa phallo o tlasetage. Ho fetolela sephetho sa voltage ho li-turbidity units (NTU), mokhoa o latelang o ka sebelisoa: 10-6 (PPM) = 1ppm = 1mg/L = 0.13NTU (empirical formula). Bakeng sa mohlalaample, 3.5% turbidity e lekana le 35000ppm, 35000mg/L, kapa 4550NTU.

Tsebiso e Ikgethileng:

1. Bokaholimo ba probe ha bo kenelle metsi. Ke karolo e bonaletsang feela e lokelang ho kenngoa ka metsing.
2. Ela hloko polarity ea matla ha wiring ho qoba ho senya sensor ka lebaka la khokahano e khutlisitsoeng.
3. Voltage lokela ho ba DC5V. E-ba hlokolosi ka ho feteletsengtage ho thibela ho chesa kutlo.

Litaelo tsa Tšebeliso ea Sehlahisoa

1. Hokela Sensor ea Teko ea Turbidity ea Metsi ho boto ea Arduino ho latela litaelo tsa likhoele tse fanoeng bukeng ea tataiso.
2. Kenya khoutu ea mohloli e fanoeng botong ea Arduino.
3. Netefatsa hore karolo e bonaletsang ea probe e qoelisoa ka metsing bakeng sa ho bala ka nepo.
4. Kenya matla ho boto ea Arduino 'me u bule sebali sa serial khomphuteng ea hau.
5. Boleng ba analog bo baloang ho tloha pineng ea analog A0 e tla hlahisoa ho sebali sa serial. Boleng bona bo tsamaellana le voltage ea pheletso ea lets'oao la sensor.
6. Sheba sebopeho sa motlakase ho fumana tekanyo ea turbidity ea metsi ho latela voltage bohlokoa.
7. Pheta ts'ebetso ea ho beha leihlo le botsitso khafetsa.

Tlhaloso

Sensor ea turbidity e lemoha boleng ba metsi ka ho lekanya boemo ba moferefere. Molao-motheo ke ho fetolela lets'oao la hona joale ka boeona ho voltage tlhahiso ka potoloho. Sebaka sa ho lemoha ha eona ke 0% -3.5% (0-4550NTU) , e nang le mefuta e mengata ea liphoso ± 05%F*S. Ha u sebelisa, lekanya bophahamo ba modumotagboleng ba pheletso ea Letšoao la sensor; ebe o lekola moferefere oa metsi ka mokhoa o bonolo oa ho bala. Sensor ena ea turbidity e na le mekhoa ea ho hlahisa matšoao a analog le a dijithale. Mojule o na le switch ea li-slide. Ha o thellela switch ho A pheletsong, hokela pheletso ea lets'oao ho boema-kepe ba analog, o ka bala boleng ba analoge ho bala palo ea tlhahiso.tage le ho fumana tekanyo ea turbidity ea metsi. Haeba e thellela pheletsong ea D, hokela pheletsong ea lets'oao ho boema-kepe ba dijithale, e khona ho bona metsi hore na a pherekano ka ho ntša boemo ba HIGH kapa BOTLASE. U ka bulela potentiometer e putsoa ho sensor ho fetola kutlo ea kutlo. Li-sensor tsa matsoele a metsi li ka sebelisoa ho lekanya boleng ba metsi linōkeng le melapong, litekanyo tsa metsi a litšila le litšila, lipatlisiso tsa lipalangoang tsa sediment le litekanyo tsa laboratori.
Hlokomela: bokaholimo ba probe ha bo na metsi; e ka beha feela karolo e tlase e bonaletsang ka metsing.

Tlhaloso

• Tshebetso Voltage: DC 5V
• Ts'ebetso ea Hona Joale: hoo e ka bang 11mA
• Sebaka sa ho Lemoha: 0%–3.5%(0-4550NTU)
• Thempereichara ea ho sebetsa: -30 ℃ ~ 80 ℃
• Mocheso oa polokelo: -10 ℃ ~ 80 ℃
• Lekhalo la Liphoso: ±0.5%F*S
• Boima ba 'mele: 30 g

Motlakase Characteristic Curve

Tafole e tsamaellanang ea tlhahiso voltage le mahloriso a bonts'a hore ha boleng ba turbidity bo le holimo, molumo o tlase oa tlhahisotage ke. Chate, bareki ba bangata ha ba tsebe ho fetolela liperesente (%) ho li-unit tsa turbidity (NTU).
Mokhoa o latelang oa phetoho o fumanoa ka mor'a ho netefatsoa: 10-6 (PPM)=1ppm=1mg/L=0.13NTU (formula e matla)
ke hore: 3.5%=35000ppm=35000mg/L=4550NTU

Tsebiso e Ikgethileng:

1. Bokaholimo ba probe ha bo na metsi; e ka beha feela karolo e bonaletsang metsing.
2. Ela hloko haholoanyane polarity ea matla ha u kenya mohala. Qoba ho chesa sensor ka lebaka la khokahano e fetotsoeng. Molumotage ka ba DC5V feela; ela hloko haholo ka voltage ho thibela ho fetellatage ho tloha ho chesa kutlo.

Mohloli oa Khoutu
void setup() {// qala puisano ea serial ho 9600 bits ka motsotsoana: Serial.begin(9600);}// the loop routine e tsoela pele khafetsa ka ho sa feleng: void loop() {// bala tlhahiso ho analog pin 0 : int sensorValue = analogRead(A0); // hatisa boleng boo u bo balileng: Serial.println(sensorValue); tieho(100); // lieha pakeng tsa ho bala bakeng sa botsitso}

Sephetho sa Tlhahlobo

Tekong, re thellela switch ho A pheletsong, ebe re bala boleng ba analoge bo bontšitsoeng ka tlase. Theko ea analoge 0-1023 e lumellana le voltagke 0-5V. Re ka sebetsana le voltagE ea pheletso ea lets'oao la sensor ka boleng ba analoge, ebe o fumana tekanyo ea metsi a turbidity ka curve ea sebopeho sa motlakase.

Litokomane / Lisebelisoa

CONRAD 2734647 Sensor ea Teko ea Turbidity ea Metsi bakeng sa Arduino [pdf] Bukana ea Mosebelisi 2734647 Sensor ea Teko ea Moferefere oa Metsi bakeng sa Arduino, 2734647, Sensor ea Teko ea Turbidity ea Metsi bakeng sa Arduino, 2734647 Sensor ea Teko ea Moferefere oa Metsi, Sensor ea Teko ea Turbidity, Sensor ea Teko ea Turbidity, Sensor Test, Sensor

Litšupiso

• Bukana ea Mosebelisi