COBALT 8 lentsoe le atolositsoeng Virtual Analog Synthesizer Module User Guide
Modal COBALT8M ke lentsoe la 8 polyphonic e atolositsoeng ea analogue synthesizer e ka sebelisoang e le mojule oa komporo kapa ea beoa rack ea 19 ”3U. E na le lihlopha tse 2 tse ikemetseng tsa oscillator, se seng le se seng se na le li-algorithms tse 34 tse fapaneng.
Ka nqane ho li-oscillator ho na le filthara ea lere ea 4-pole morphable e nang le litlhophiso tse fetohang, lijenereithara tse 3 tsa enfelopo, li-LFO tse 3, lienjineri tse 3 tse matla tse ikemetseng le tse lokisehang tsa stereo FX, sequencer ea nako ea 'nete, sebatli se ka lokisetsoang le modulation matrix e pharaletseng.
Sesebelisoa sa Screen
Li-encoder tse peli tse fetotsoeng mahlakoreng ka bobeli a skrine li sebelisetsoa ho tsamaisa le ho laola skrineng:
Leqephe/Param – Ha encoder ena e le ka har'a "Leqephe" e potoloha maqepheng a paramethara (mohlala, Osc1, Osc2, Sefe); ha e le ka "Param" e potoloha liparamente tse leqepheng leo. Sebelisa switch ho fetola lipakeng tsa mekhoa e 'meli, mokhoa o hlahisoa skrineng ka mola holimo bakeng sa 'Page' mode 'me ka tlase bakeng sa' Param 'mode.
Preset/Edit/Bank - Encoder/switch ena e sebelisoa ho lokisa boleng kapa ho 'hlakisa' paramethara e bonts'itsoeng hajoale. Ha o le paramenteng ea 'Load Patch' ha phanele e le ka har'a mokhoa oa 'Shift' mochine ona oa khouto o sebelisoa ho khetha nomoro ea patch bank.
Lihokelo
- Li-headphone - 1/4” jack socket ea stereo
- Ho lokile - Audio Out bakeng sa kanale e nepahetseng ea stereo. 1/4" e sa leka-lekanang ea jack socket
- Ka ho le letšehali/Mono - Audio Out bakeng sa kanale ea stereo e letšehali. Haeba ha ho na thapo e kentsoeng ka har'a Socket e ka ho le letona, joale e akaretsa ho Mono. 1/4" e sa leka-lekanang ea jack socket
- Polelo - kenyelletso ea pedal e ka lokisoang, 1/4” TRS jack socket
- Ntlafatsa - e sebetsa ka mokhoa o fe kapa o fe, o bulehileng oa leoto la nakoana, 1/4” TS jack socket
- Audio In - kenyelletso ea molumo oa stereo, ho sebetsana le mohloli oa hau oa molumo ka lienjineri tsa FX tsa COBALT8M, 3.5mm TRS jack socket
Mesebetsi ea Shift - liparamente tse boputsoa bo bobebe li ka fihlelleha ka ho kenya "Shift" mode u sebelisa konopo e ka letsohong le letona la skrini ka selikalikoe se boputsoa bo bobebe. Shift e ka ba ea nakoana ka ho ts'oara konopo le ho fetola paramente kapa ho ts'oaroa ka ho tobetsa konopo ea shift.
Alt mesebetsi - litekanyo tse bohlooho bo bobebe li ka fihlelleha ka ho tšoara konopo e nang le selikalikoe sa bohlooho bo khanyang karolong e le 'ngoe (Velo). Mokhoa oa 'Alt' o lula o le oa nakoana mme o tla tsoa ka mokhoa oa 'Alt' ha o lokolla konopo.
Li-Presets
Patch/Seq - konopo ena e sebelisoa haholo ho fetolela skrine ho "Load Patch" kapa 'Load Seq' param bakeng sa ho kenya li-patch kapa tatellano, leha ho le joalo konopo ena e boetse e kenya phanele hore e be "Patch" kapa "Seq" mode. . Sena se fetola likonopo tsa 'Boloka' le 'Init' hore li sebetse tsamaiso ea Patch preset ka mokhoa oa 'Patch' kapa tsamaiso ea Sequencer preset ka mokhoa oa 'Seq'.
'Init / Rand' - konopo ena e sebetsa feela ha e ts'oaroe.
COBALT8M e ka ba le mefuta e mengata e matla kahoo ho na le taolo ea Patch Gain e ka sebelisoang ho lekanya palo ea li-patch. Tšoara konopo ea 'Patch' 'me u fetole encoder ea' Volume 'ho laola paramethara ea 'Patch Gain'.
Sync In - oache ea analogue ka hare. 3.3v, moeli o nyolohang, molumo o le 1 ka lets'oao la lintlha tsa 16, 3.5mm TS jack socket
Sync Out - oache ea analogue e felile, tlhophiso e ts'oanang le ea oache, 3.5mm TS jack socket
MIDI E tsoa - e sebelisoa ho laola lisebelisoa tse ling tsa MIDI, sokete ea 5-pin DIN MIDI
MIDI Ka - e ne e laoloa ho tsoa ho lisebelisoa tse ling tsa MIDI, sokete ea 5-pin DIN MIDI
MIDI ea USB - MIDI ho tsoa / ho tsoa ho moamoheli oa USB MIDI, hokela COBALT8M ho laptop/tablet/sesebediswa sa mohala bakeng sa mohlophisi oa software ea boikhethelo, MODALapp, sokete ea USB-B ea boholo bo felletseng.
Matla - 9.0V, 1.5A, phepelo ea motlakase ea li-barrel e bohareng
Ho boloka esale pele
Tobetsa konopo ea 'Boloka' ho kenya mokhoa oa ho boloka 'full' kapa u tšoare konopo ea 'Boloka' ho boloka 'potlako' (ho boloka setaele se secha sa slot se nang le lebitso la hajoale).
Ha u se u ntse u le teng ka botlalo, li-presets li bolokiloe ka tsela e latelang:
Khetho ea slot - Sebelisa encoder ea 'Edita' ho khetha banka / nomoro eo u ka e bolokang esale pele, ebe o tobetsa konopo ea 'Edita' ho e khetha.
Ho reha mabitso - Sebelisa encoder ea 'Leqephe/Param' ho khetha boemo ba sebapali 'me u sebelise encoder ea 'Edita' ho khetha sebapali. Tobetsa konopo ea 'Edita' ho qeta ho fetola lebitso.
Ho na le liqeto tsa liphanele tse 'maloa mona:
Tobetsa 'Velo' ho tlolela ho litlhaku tse nyane
Tobetsa 'AftT' ho tlolela ho litlhaku tse kholo
Tobetsa 'Hlokomela' ho tlolela linomorong
Tobetsa 'Expr' ho tlolela matšoao
Tobetsa konopo ea 'Leqephe / Param' ho eketsa sebaka (ho eketsa litlhaku tsohle tse kaholimo)
Tobetsa 'Init' ho hlakola sebopeho sa hajoale (fokotsa litlhaku tsohle tse kaholimo)
Tšoara 'Init' ho hlakola lebitso kaofela
Tobetsa konopo ea 'Edita' ho netefatsa li-setting ebe u boloka tse seng li setiloe.
Nako efe kapa efe nakong ea ts'ebetso ts'oara switch ea 'Leqephe / Param' ho khutlela morao mohato.
Ho tsoa / ho tlohela ts'ebetso ntle le ho boloka lintho tse seng li setiloe, tobetsa konopo ea 'Patch / Seq'.
Ho Hopola ka Potlako
COBALT8M e na le 4 Quick Recall slots bakeng sa ho kenya lipache kapele.
Likhopotso tse Potlakileng li laoloa ho sebelisoa likonopo tse latelang:
Tšoara 'Patch' + tšoara e 'ngoe ea likonopo tse' nè tse ka tlaase ho le letšehali la phanele ho abela patch e kentsoeng hajoale sebakeng sa QR.
Tšoara 'Patch' + tobetsa e 'ngoe ea likonopo tse' nè tse ka tlaase ho le letšehali la phanele ho kenya patch sebakeng sa QR.
Sefe
Tšoara konopo ea 'Patch' 'me u bulele encoder ea' Cutoff 'ho laola mofuta oa Filter Type
Lienfelopo
Tšoara leha e le efe ea li-switch tsa EG motsotsoana o le mong ebe o fetola li-encoder tsa ADSR ho fetola lienfelopo tsohle ka nako e le 'ngoe.
Tobetsa konopo ea 'MEG' ha MEG e se e khethiloe ho latch MEG assign
Sequencer
Tšoara konopo ea 'Patch' le 'Play' ho hlakola lintlha tsa sequencer
Ha skrineng se bonts'a paramethara ea 'Linked Sequence', tšoara konopo ea 'Edita' ho beha boleng hore e be tatellano e laetsoeng hajoale.
Arp
Tšoara konopo ea 'Arp' ebe u tobetsa linotlolo ho keyboard e kantle ho kenya lintlha tsa paterone kapa u tobetse konopo ea 'Play' ho eketsa tse ling pateroneng.
Tšoara konopo ea 'Patch' 'me u fetole encoder ea' Division 'ho laola Arp Gate
LFO
Fetolela likhouto tsa 'Rate' hore e be mefuta e meng e fosahetseng ho fumana litefiso tse lumellanang
Ho fihlella liparamente tsa LFO3 kenya "Shift" mode ebe o tobetsa konopo ea LFO2/ LFO3
Keyboard / Lentswe
Tobetsa 'Mode' khafetsa ho potoloha mefuta e fapaneng ea lentsoe Mono, Poly, Unison (2,4 le 8) le Stack (2 le 4).
Tobetsa 'Chord' ha u ntse u tšoere sekonopo lebokoseng le kantle ho seta chord mode chord.
Ho feto-fetoha ha molumo oa lentsoe
Ho abela Mod Slot e ka ts'oara (ea motsotsoana) kapa ea koalla konopo ea mohloli oa Mod - ebe o seta botebo ka ho fetolela parameter eo u e batlang ea modulation
Ha o koaletsoe ka har'a Mohloli oa Mod Mod mme o tobetsa konopo ea Mod Source e phatsimang hape o tla tsoa mokhoeng oa ho abela
Mod key source + 'Depth' encoder - seta botebo ba lefats'e bakeng sa mohloli oo oa mod
Tobetsa ModSlot khafetsa ho potoloha le view litlhophiso tsohle tsa mod slot skrineng
Ha skrineng se bonts'a mod slot 'Depth' parameter (e fumanehang habonolo ka ho fana ka modulation ka phanele kapa ka konopo ea ModSlot), tšoara konopo ea 'Edita' ho hlakola kabelo ea mod slot.
Ho abela mohloli oa mod ho sebaka sa lefats'e sa maqhubu, sebelisa e 'ngoe ea litaolo tsa molumo oa molumo. 'Tune1' e tla abela Osc1 tune, 'Tune2' e tla fana ka pina ea Osc2.
FX
Tobetsa FX1 / FX2 / FX3 switjha khafetsa ho fetola mofuta oa FX oa slot
Tšoara FX1 / FX2 / FX3 switch ho seta mofuta oa FX oa slot ho 'Ha ho letho'
Fetolela "B" encoder hore e be moeling o fosahetseng bakeng sa sekotjana ka a
Lieha FX e abetsoe ho fihlella linako tsa ho lieha tse hokahaneng
Tobetsa FX1 + FX2 + FX3 ho tlolela ho parameter ea 'FX Preset Load'
Li-oscillators
Tobetsa konopo ea 'Algorithm' ho fetola lipakeng tsa li-control tsa algorithm tsa Osc1 le Osc2
Bala haholoanyane ka Bukana ena & Khoasolla PDF:
Litokomane / Lisebelisoa
 |
COBALT 8 lentsoe E atolositsoeng Virtual Analog Synthesizer Module [pdf] Bukana ea Mosebelisi 8 lentsoe Module ea Virtual Analog Synthesizer Module |
