Letoto la PyroCAN
Tataiso ea Basebelisi
PCAN21 Output Signal Infrared Temperature Sensor
Lisensara tsa mocheso oa infrared tsa PyroCAN li lekanya mocheso ho tloha ho -20°C ho ea ho 1000°C le ho fetisa 'malo ka mokhoa oa digital ka sebopeho sa Raw CAN.
LIEKETSENG TS'OANELO
Temperature Range vs Field-of-View tafole
| Tšimo ea View | Nomoro ea Mohlala |
| 2:1 | PCAN21 |
| 10:1 | PCAN201 |
| Sehokedi | E tala e KA |
| Ho nepahala | ±1% ea ho bala kapa ±1ºC hore na ho hoholo ke hofe |
| Pheta-pheta | ± 0.5% ya ho bala kapa ± 0.5ºC hore na ho hoholo ke hofe |
| Ho se tsotelle | 0.2 ho 1.0, e ka fetolehang ka CAN |
| Nako ea Karabelo, t90 | 200 ms (90% karabo) |
| Sekhahla sa Spectral | 8 ho isa ho 14 μm |
| Phepelo Voltage | 12 ho 24 V DC |
| Phepelo ea Hona Joale | 50 mA max. |
| Baud Rate | 250 kbps |
| Sebopeho | bona PROTOCOL |
| MOEKETSI | |
| Kaho | Ts'epe e sa beng le mabali |
| Litekanyo | 18 mm bophara x 103 mm bolelele |
| Ho phahamisa likhoele | M16 x 1 limilimithara sekontiri |
| Bolelele ba Cable | 1 m |
| Boima ka Cable | 95 g |
| TIKOLOHO | |
| Tikoloho Rating | IP65 |
| Ambient Mocheso | 0ºC ho isa ho 90ºC |
| Mongobo o Batlang | 95% max. e sa koaheleng |
LIEKETSENG
Ho na le mefuta e mengata ea lisebelisoa tse lumellanang le lits'ebetso tse fapaneng le maemo a indasteri. Li ka odara ka nako efe kapa efe 'me tsa eketsoa sebakeng sa marang-rang. Lisebelisoa li na le likarolo tse latelang .
Bracket e ntseng e hola e feto-fetohang e ka fetohang Kolara ea Air purge Sesebelisoa sa Laser sa ho bona Fensetere ea polasitiki e sirelelitseng e nang le sets'oants'o sa tšepe e sa hloekang Brakete e ntseng e hola e nang le laser e sa khaotseng ea ho bona.
MAKHETHA
Likhetho tse latelang lia fumaneha. Likhetho li kentsoe fekthering 'me li tlameha ho laeloa ka sensor.
Ntlo e pholisitsoeng ea moea/metsi Setifikeiti sa ho lekanya Cable e telele
TŠEBELETSO TŠOELE
Chate ea mahlo e ka tlase e bontša bophara ba sebaka seo u batlang ho se sheba sebakeng leha e le sefe ho tloha hloohong ea kutlo 'me e nka 90% ea matla.
KEKETSO
Tshebetso ya ho instola e na le tse latelang stages:
Tokisetso Ho kenya mochine Ho kenya motlakase Ka kopo bala likarolo tse latelang ka botlalo pele u tsoela pele ka ho kenya.
PHAKISO
Etsa bonnete ba hore sensor e behiloe e le hore e tsepamise maikutlo ho sepheo feela.
KGALA LE MATHEBA
Boholo ba sebaka (boholo ba sebaka) bo lokelang ho lekanyetsoa bo lekanya sebaka se pakeng tsa sensor le sepheo. Boholo ba letheba ha boa lokela ho ba kholo ho feta sepheo. Sensor e lokela ho kenngoa e le hore boholo ba sebaka se lekantsoeng bo be nyane ho feta sepheo.
TEMPERATURE E MABAPI
Sensor e etselitsoe ho sebetsa maemong a mocheso ho tloha ho 0 ° C ho ea ho 90 ° C.
Qoba ho tšoha ha mocheso. Lumella metsotso e 20 hore yuniti e ikamahanye le liphetoho tse kholo tsa mocheso oa tikoloho.
TŠEBELETSO SEAMOSO
Mosi, mosi kapa lerole li ka silafatsa lense 'me tsa baka liphoso tekanyong ea mocheso.
Mofuteng ona oa tikoloho ho lokela ho sebelisoa molala oa ho hloekisa moea ho thusa ho boloka lense e hloekile.
TŠITISO MOTLATSI
Ho fokotsa tšitiso ea motlakase kapa 'lerata', sensor e lokela ho beoa hole le li-motors, lijenereithara le tse ling tse joalo.
KHOPO
Sheba sebaka se pakeng tsa sensor le sesebelisoa se hokahaneng. Haeba ho hlokahala, sensor e ka laeloa ka mohala o molelele o khomaretsoeng.
PHEPELO EA MOTLAKASE
Etsa bonnete ba hore o sebelisa motlakase oa 12 ho isa ho 24 V DC (50mA max.)
KEKETSO MOCHA
Li-sensor tsohle li tla le thapo ea 1m le nate e ntseng e phahama. Sensor e ka kenngoa ka har'a li-brackets kapa ea khaola likotoana tsa moralo oa hau, kapa o ka sebelisa lisebelisoa tsa bracket tse tsitsitseng le tse feto-fetohang tse bonts'itsoeng ka tlase.
Hlokomela: Sensor e tlameha ho theoa sebakeng se le seng feela, ebang ke thebe ea cable kapa ntlo ea sensor.
NTLO E PHOLISITSENG MOYA/METSI
Ntlo e pholileng ea moea / metsi e bontšitsoeng ka tlase e lumella sensor ho mamella mocheso o phahameng oa tikoloho.
E na le lisebelisoa tse peli tsa 1/8 ”BSP. Mocheso oa metsi o lokela ho ba 10°C ho isa ho 27°C bakeng sa ho pholisa hantle. Metsi a pholileng a ka tlase ho 10°C ha a khothalletsoe. E le ho qoba condensation, molala oa ho hloekisa moea o lokela ho sebelisoa le matlo a pholileng ka metsi. Sekhahla sa phallo ea metsi ha sea lokela ho feta 0.5 ho isa ho 1.5 lithara ka motsotso.
MOEA PHEPHA KHOLO
Molala oa ho hloekisa moea o ka tlase o sebelisoa ho boloka lerole, mosi, mongobo le litšila tse ling hole le lense. E tlameha ho kenngoa ka ho feletseng. Moea o phalla ka har'a 1/8 ″ BSP e kenang le ho tsoa sebakeng se robehileng. Phallo ea moea ha ea lokela ho feta 5 ho isa ho 15 litres / min.
Moea o hloekileng kapa oa 'seletsa' oa khothaletsoa.
LITLHAKISO TSA MOTSI
Likhoutu tsa mebala ea mohala:
| Brown | PWR+ | +12 ho +24 V DC |
| Bosoeu | PWR- | 0 V |
| Bosehla | OP+ | CAN tlhahiso + |
| Botala | OP- | Tlhahiso ea CAN - |
LEANO
- Sensor e fetisa molaetsa oa 8-byte ka 200 ms e 'ngoe le e 'ngoe e nang le mocheso le mocheso oa ntho ho °C.
- Li-byte tse 4 tsa pele ke mocheso oa ntho o kentsoeng joalo ka ntlha e phaphametseng.
- 4-byte ea bobeli ke mocheso o potolohileng o kentsoeng joalo ka sebaka se phaphametseng.
- Molaetsa ona o romelloa ho CAN ID e bolokiloeng mohopolong o sa fetoheng. ID e phehella lipakeng tsa lipotoloho tsa motlakase.
- CAN ID e ka hlophisoa ho boleng ho tloha ho 0 ho isa ho 2048 (0x0 ho isa ho 0x800) joalo ka palo e saenneng ea 4-byte.
- Boemo ba emissivity bo ka beoa ho boleng ho tloha ho 0.2 ho isa ho 1.0 joalo ka 4-byte floating-point.
- Maemo ana a phaphametseng a ka hlalosoa feela ka ho sebelisa IEEE 754 binary-to-decimal converter.
Litokomane / Lisebelisoa
 |
CALEX PCAN21 Output Signal Infrared Temperature Sensor [pdf] Bukana ea Mosebelisi PCAN21 Output Pontšo ea Infrared Temperature Sensor, PCAN21, Sensor ea Mocheso ea Mocheso ea Infrared, Sensor ea Mocheso ea Infrared, Sensor ea Mocheso ea Infrared, Sensor ea Thempereichara, Sensor |