BRIGHTLIGHT Cosmo Linear System Installation Guide
MAKATENG
KANTLE
The Cosmo Linear System comes as separate IP67 modules which can easily be connected via cables underneath for runs up to 10m.
Mounting accessories should be installed first, refer to page 2.
Cosmo Linear modules then can be clicked into mounting accessories. Power feed/ extension cables come seperately and can just be clipped in where required.
| LESOA LITS'OANE | 26W/m White 18W/m Tunable White 18W/m RGBW |
| INPUT VOLTS | 24V DC khafetsa voltage |
| TS'EBELETSO MORAKO. | -20°C ~ +45°C |
| MAX. RUN PER POWER FEED | 10 limithara |
| TS'IRELETSO INGRESS | IP67 |
| IK RATING | IK10 |
| UV | E hanyetsanang le UV |
LIEKETSENG MODULE
END CAPS ADD AN ADDITIONAL 5MM PER MODULE
COMBINED LENGTHS FOR CLOSEST TOTAL LENGTH.
PROJECTS SHOULD HAVE PLAN OR TABLE OUTLINED LENGTHS
MAKHOPO
STANDARD INLINE CONNECTION
For continuous straight lines of light.
CABLES CONCEALED UNDERNEATH
CORNER ALLOWANCE CONNECTION
For turning connected modules around hard corners
EXTENSION CABLE CONNECTION
For large gaps or obstacle avoidance
COLOUR CONTROL & WIRING
TŠOEU
Single channel dimmer (optional)
| Cable | Channel |
| Brown | E ntle (+) |
| Boputsoa | E mpe (-) |
TUNEABLE WHITE
2-channel controller
| Cable | Channel |
| Brown | E ntle (+) |
| Bosehla | 2700K (-) |
| Boputsoa | 6500K (-) |
RGBW
4-channel controller.
| Cable | Channel |
| Ntsho | E ntle (+) |
| Brown | Khubedu |
| Bosehla | Botala |
| Boputsoa | Boputsoa |
| Bosoeu | Bosoeu |
RGBW (PIXEL ADDRESSABLE)
DMX512 molaoli eo
| Cable | Channel |
| Brown | E ntle (+) |
| Ntsho | PI |
| Bosehla | B (DMX – ) |
| Bosoeu | A (DMX +) |
| Boputsoa | E mpe (-) |
MATLA KHALE
FEED POWER CABLE
Connector to bare wires (up to 9m)
T-FEED POWER CABLE
A T-feed cable powers 10m max of linear system on each side.
The tail to bare wires can be up to 9m.
EXTENSION CONNECTION CABLE
Allows flexibility around obstacles/ structural elements.
Adds to the max. 9m total cable limit.
IP67 END CAP
Alternative end piece option.
Turn connection module into end piece with an IP67 end cap to terminate cable and maintain the IP rating. Fold cable underneath fixing for a tidy look.
KEKETSO MOEKETSI
FIXED MOUNTING CLIPS
Designed for horizontal mounting.
- Screw mount clips. Check clips will tilt in desired direction before installation.
- Connect full module run before fitting into clips.
60° ADJUSTABLE MOUNTING CLIPS
Designed for horizontal mounting.
- Screw mount clips. Check clips will tilt in desired direction before installation.
- Connect full module run pele fitting into clips.
90° ADJUSTABLE MOUNTING CLIPS
Designed for horizontal mounting.
- Screw mount clips. Check clips will tilt in desired direction before installation.
- Full module runs can be connected either before or after installation into clips.
- Tilt to angle
180° ADJUSTABLE MOUNTING CLIPS
Designed for horizontal mounting.
- Screw mount clips. Check clips will tilt in desired direction before installation.
- Full module runs can be connected either before or after installation into clips.
- Tilt to angle
IN-GROUND ALUMINIUM PROFILE
- Router out rebate groove.
Profile 27mm bophara
- Screw-fix In-ground Aluminium Profile.
- Connect full module run before inserting into profile.
0800 952 000
www.brightlight.co.nz
BRIGHTLIGHT
Actual product characteristics may vary.
Bright Light reserves the right to improve, modify or update the product designs without prior notice.
Litokomane / Lisebelisoa
 |
BRIGHTLIGHT Cosmo Linear System [pdf] Tlhophiso Tataiso 26W-m White, 18W-m Tuneable White, 18W-m RGBW, Cosmo Linear System, Linear System |
