BOARDCON MINI3288 Boto e le 'ngoe ea Khomphutha e Tsamaisa Android

Lipotso Tse Botsoang Hangata

P: Ke bokae boholo ba hajoale bo tšehetsoang ke VCC_IO?

A: VCC_IO e tšehetsa boholo ba hona joale ba 600-800mA.

P: Li-voltaglintlha tsa ho kenya letsoho bakeng sa sistimi?

A: Sistimi e hloka matla a phepelo ea sistimitage input ea 3.6V ho 5V.

Selelekela

Mabapi le Bukana ena
Bukana ena e reretsoe ho fa mosebedisi ho fetaview ea boto le melemo, lintlha tse felletseng tsa likarolo, le ho theha lits'ebetso. E na le boitsebiso ba bohlokoa ba tšireletso hape.

Maikutlo le Nchafatso ea Bukana ena
Ho thusa bareki ba rona ho sebelisa lihlahisoa tsa rona hamolemo, re lula re etsa hore lisebelisoa tse ling tse nchafalitsoeng li fumanehe ho Boardcon websaete (www.boardcon.com , www.armdesigner.com).
Tsena li kenyelletsa libuka, lintlha tsa kopo, mohlala oa lenaneoamples, le software e ntlafalitsoeng le hardware. Kena nako le nako ho bona tse ncha!
Ha re beha mosebetsi pele ho lisebelisoa tsena tse nchafalitsoeng, maikutlo a tsoang ho bareki ke tšusumetso ea pele, haeba u na le lipotso, maikutlo, kapa matšoenyeho ka sehlahisoa kapa morero oa hau, ka kopo u se ke oa tsilatsila ho ikopanya le rona ho support@armdesigner.com.

Tiisetso e Lekanyelitsoeng
Boardcon e fana ka tumello ea hore sehlahisoa sena se hloke bofokoli linthong tse bonahalang le moetsong nako ea selemo ho tloha ka letsatsi la theko. Nakong ena ea tiisetso Boardcon e tla lokisa kapa e nkele sebaka se nang le bothata ho latela ts'ebetso e latelang:
Khopi ea invoice ea mantlha e tlameha ho kenyeletsoa ha o khutlisetsa unit e nang le bothata ho Boardcon. Tiisetso ena e lekanyelitsoeng ha e koahele litšenyehelo tse bakoang ke ho khantša kapa ho kenngoeng ha motlakase, tšebeliso e mpe, tšebeliso e mpe, maemo a sa tloaelehang a ts'ebetso, kapa liteko tsa ho fetola kapa ho fetola tšebetso ea sehlahisoa. Tiisetso ena e lekanyelitsoe ho lokisong kapa ho nkela sebaka se senyehileng. Ha ho ketsahalo e tla ikarabella kapa ho ikarabella bakeng sa tahlehelo kapa ts'enyehelo, ho kenyeletsoa empa e sa felle feela ho phaello efe kapa efe e lahlehileng, ts'enyehelo ea tšohanyetso kapa ea litlamorao, tahlehelo ea khoebo, kapa phaello e lebelletsoeng. e bakoang ke tshebediso kapa ho se kgone ho sebedisa dihlahiswa tsena. Litokiso li etsoa ka mor'a ho fela ha nako ea tiisetso li itšetlehile ka tefiso ea tokiso le litšenyehelo tsa ho khutlisa thepa. Ka kopo ikopanye le Boardcon ho hlophisa litšebeletso life kapa life tsa tokiso le ho fumana leseli la tefiso ea tokiso.

MINI3288 Selelekela

Kakaretso

• MINI3288 ke System on Module (SOM) e thehiloeng ho RK3288. Mojule o na le ts'ebetso ea li-pin tsa RK3288, theko e tlase le ts'ebetso e phahameng. E lumellana le MINI3288.
• RK3288 E kopanya quad-core Cortex-A17 ka Neon le FPU coprocessor e arohaneng, hape e arolelanoa 1MB L2 Cache. Liaterese tse fetang 32-bit li tla tšehetsa sebaka sa ho fihla ho 8GB.
• Hajoale, moloko oa morao-rao le GPU e matla ka ho fetesisa e kentsoe ho ts'ehetsa ponts'o ea qeto e phahameng (3840 × 2160) le papali e tloaelehileng. Tšehetsa OpenVG1.1, OpenGL ES1.1/2.0/3.0, OpenCL1.1, RenderScript le DirectX11 joalo-joalo Decoder ea video e nang le sebopeho se felletseng, ho kenyeletsoa 4Kx2K decoder ea mefuta e mengata.
• Lisebelisoa tse ngata tse sebetsang hantle ho fumana tharollo e bonolo haholo, joalo ka ponts'o ea liphaephe tse ngata tse nang le li-channel tse peli tsa LVDS, MIPI-DSI kapa MIPI-CSI khetho, HDMI2.0, ISP e kentsoeng habeli.
• Dual-Channel 64bits DDR3/LPDDR2/LPDDR3 e fana ka li-bandwidth tse hlokang mohopolo bakeng sa ts'ebeliso e phahameng ea ts'ebetso le tharollo e phahameng.
• Khomphuta e le 'ngoe ea boto e na le litokomane tse felletseng tsa elektroniki, meralo, lits'ebetso tsa demo, le bahokahanyi ba C ba maemo a holimo indastering le libaka tsa ntlafatso tse kenelletseng bakeng sa tlhahlobo. Re na le bonnete ba hore re tla ba le komporo ea boto e nepahetseng bakeng sa lits'ebetso tsa hau.

Lintlha tsa RK3288

• CPU
  • Quad-Core Cortex-A17 Ka Karohano e Kopantsoeng Neon le FPU ho CPU 32KB/32KB L1 ICache/DCache ka CPU Unified 1MB L2 Cache
  • LPAE (Katoloso e kholo ea Aterese ea Boemo) , Tšehetsa sebaka sa aterese sa 8GB sa Virtualization Extensions Support
• GPU
  • Letoto la Quad-Core Mali-T7, processor ea morao-rao e matla ea litšoantšo E etselitsoe komporo ea GPU
  • Tšehetsa OpenGL ES1.1/2.0/3.0, OpenVG1.1, OpenCL1.1 le Renderscript, Directx11
• VPU
  • E tšehetsa MPEG-2, MPEG-4, AVS, VC-1, VP8, MVC ka ho fihla ho 1080p@60fps
  • Ts'ehetsa li-decoder tsa liforomo tse ngata tse fihlang ho 4Kx2K
  • E ts'ehetsa encoder ea video e nang le sebopeho se fihlang ho 1080p@30fps
• Phatlalatso ea Video
  • Kenyelletso ea Video: MIPI CSI, DVP
  • Pontšo ea video: RGB/ 8/10bits LVDS, HDMI2.0 ho tšehetsa ponts'o e phahameng ea 4Kx2K
• Memori Interface
  • Nand Flash Interface
  • EMMC Interface
  • DR segokahanyi
• Khokahano e ruileng
  •  SD/MMC/SDIO segokanyimmediamentsi sa sebolokigolo, e sebeletsanang le SD3.0, SDIO3.0 le MMC4.5
  • Khokahano e le 'ngoe ea 8-channel I2S/PCM, Sehokelo se le seng sa 8-channel SPDIF
  • USB2.0 OTG e le 'ngoe, Moamoheli oa USB2.0 tse peli
  • 100M/1000M RMII/RGMII Ethernet interface
  • Dual channel TS stream interface, descramble le demux tšehetso
  • Sehokelo sa Smart Card
  • 4-CH UART, 2-CH SPI (khetho), 6-CH I2C(ho fihla ho 4Mbps), 2-CH PWM (khetho)
  • PS/2 segokanyimmediamentsi sa sebolokigolo
  • HSIC sebopeho
  • Kenyelletso ea 3-CH ADC

Likarolo tsa MINI3288

Sebopeho	Litlhaloso
CPU	Sesebelisoa sa RK3288 Quad-core ARM Cortex-A17 MPCore
Mohopolo	512MB DDR3L ea kamehla
NAND Flash	8GB eMMC Flash
Matla	Motlakase oa DC 3.6V-5V
PMU	ACT8846
UART	4-CH (ho fihla ho 5-CH, khetho ka SPI0)
RGB	24-bit
LVDS	1-CH 10bit Dul-LVDS
Ethernet	1 Gigabit (RTL8211 ka sekepeng)
USB	2-CH USB2.0 Host, 1-CH USB2.0 OTG
SPDF	EA-1-CH
CIF	1-CH DVP 8-bit le MIPI CSI
HDMI	EA-1-CH
PS2	EA-1-CH
ADC	EA-3-CH
PWM	2-CH (ho fihla ho 4-CH, khetho ka UART2)
IIC	EA-5-CH
AUDIO IF	EA-1-CH
SPI	EA-2-CH
HSMMC/SD	EA-2-CH
Boemo	70 x 58 limilimithara

Boemo ba PCB

Setšoantšo se Thibeloang

Kenyelletso ea CPU Module

Thepa ea motlakase

Phatlalatso

Letšoao	Paramethara	Min	Tlanya	Max	Yuniti
SYS_MATLA	Phepelo ea Tsamaiso MoqtagKeletso	3.6	5	5	V
VCC_IO	IO Supply VoltagKhumo		3.3		V
VCCA_18	RK1000-S		1.8		V
VCCA_33	LCDC/I2S Controller		3.3		V
VCC_18	RK3288 SAR-ADC/ RK3288 USB PHY		1.8		V
VCC_LAN	LAN PHY		3.3		V
VCC_RTC	RTC Battery Voltage	2.5	3	3.6	V
Isys_matla	Tsamaiso ea Phepelo ea Max ea Hona joale		1.1	1.5	A
Imax(VCC_IO)	VCC_IO Max Hona Joale		600	800	mA
Ivcca_18	VCCA_18 Max ea Hona Joale			250	mA
Ivcca_33	VCCA_33 Max ea Hona Joale			350	mA
Ivcc_18	VCC_18 Max Hona Joale			350	mA

Irtc

Kenyelletso ea RTC ea Hona Joale

10

uA

Mocheso oa CPU

Teko Maemo	Tikoloho Mocheso	Min	Tlanya	Max	Yuniti
Ema haufi	20		43	45	℃
Bapala video	20		45	48	℃
Matla a tletseng	20		80	85	℃

Pin Tlhaloso

Pin (J1)	Lebitso la lets'oao	Fuction 1	Fuction 2	Mofuta oa IO
1	TX_C-	HDMI TMDS Clock-		O
2	TX_0-	Lintlha tsa HDMI TMDS0-		O
3	TX_C+	HDMI TMDS Clock+		O
4	TX_0+	Lintlha tsa HDMI TMDS0+		O
5	GND	Sebaka sa Matla		P
6	GND	Sebaka sa Matla		P
7	TX_1-	Lintlha tsa HDMI TMDS1-		O
8	TX_2-	Lintlha tsa HDMI TMDS2-		O
9	TX_1+	Lintlha tsa HDMI TMDS1+		O
10	TX_2+	Lintlha tsa HDMI TMDS2+		O
11	HDMI_HPD	Ho fumanoa ha HDMI Hot Plug		I
12	HDMI_CEC	HDMI Consumer Electronics Control	GPIO7_C0_u	I/O
13	I2C5_SDA_HDMI	Lintlha tsa libese tsa I2C5	GPIO7_C3_u	I/O
14	I2C5_SCL_HDMI	I2C5 oache ea libese	GPIO7_C4_u	I/O
15	GND	Sebaka sa Matla		P
16	LCD_VSYNC	LCD Vertical Synchronization	GPIO1_D1_d	I/O
17	LCD_HSYNC	LCD Horizontal Synchronization	GPIO1_D0_d	I/O
18	LCD_CLK	Oache ea LCD	GPIO1_D3_d	I/O
19	LCD_DEN	LCD E nolofalletsa	GPIO1_D2_d	I/O
20	LCD_D0_LD0P	LCD Data0 kapa LVDS Differential Data0+		I/O
21	LCD_D1_LD0N	LCD Data1 kapa LVDS Differential Data0-		I/O
22	LCD_D2_LD1P	LCD Data2 kapa LVDS Differential Data1+		I/O
23	LCD_D3_LD1N	LCD Data3 kapa LVDS Differential Data1-		I/O
24	LCD_D4_LD2P	LCD Data4 kapa LVDS Differential Data2+		I/O
25	LCD_D5_LD2N	LCD Data5 kapa LVDS Differential Data2-		I/O
26	LCD_D6_LD3P	LCD Data6 kapa LVDS Differential Data3+		I/O
27	LCD_D7_LD3N	LCD Data7 kapa LVDS Differential Data3-		I/O
28	LCD_D8_LD4P	LCD Data8 kapa LVDS Differential Data4+		I/O

Pin (J1)	Lebitso la lets'oao	Fuction 1	Fuction 2	Mofuta oa IO
29	LCD_D9_LD4N	LCD Data9 kapa LVDS Differential Data4-		I/O
30	LCD_D10_LCK0P	LCD Data10 kapa LVDS Differential Clock0+		I/O
31	LCD_D11_LCK0N	LCD Data11 kapa LVDS Differential Clock0-		I/O
32	LCD_D12_LD5P	LCD Data12 kapa LVDS Differential Data5+		I/O
33	LCD_D13_LD5N	LCD Data13 kapa LVDS Differential Data5-		I/O
34	LCD_D14_LD6P	LCD Data14 kapa LVDS Differential Data6+		I/O
35	LCD_D15_LD6N	LCD Data15 kapa LVDS Differential Data6-		I/O
36	LCD_D16_LD7P	LCD Data16 kapa LVDS Differential Data7+		I/O
37	LCD_D17_LD7N	LCD Data17 kapa LVDS Differential Data7-		I/O
38	LCD_D18_LD8P	LCD Data18 kapa LVDS Differential Data8+		I/O
39	LCD_D19_LD8N	LCD Data19 kapa LVDS Differential Data8-		I/O
40	LCD_D20_LD9P	LCD Data20 kapa LVDS Differential Data9-		I/O
41	LCD_D21_LD9N	LCD Data21 kapa LVDS Differential Data9+		I/O
42	LCD_D22_LCK1P	LCD Data22 kapa LVDS Differential Clock1+		I/O
43	LCD_D23_LCK1N	LCD Data23 kapa LVDS Differential Clock1-		I/O
44	GND	Sebaka sa Matla		P
45	MIPI_TX/RX_CLKN	MIPI Clock ho kenya lets'oao le fosahetseng		I/O
46	MIPI_TX/RX_D0P	MIPI data pair 0 ponts'o e ntle ea pontšo		I/O
47	MIPI_TX/RX_CLKP	MIPI Clock ho kenya lets'oao le nepahetseng		I/O
48	MIPI_TX/RX_D0N	MIPI data pair 0 tlhahiso e mpe ea lets'oao		I/O
49	MIPI_TX/RX_D2N	MIPI data pair 2 tlhahiso e mpe ea lets'oao		I/O
50	MIPI_TX/RX_D1N	MIPI data pair 1 tlhahiso e mpe ea lets'oao		I/O
51	MIPI_TX/RX_D2P	MIPI data pair 2 ponts'o e ntle ea pontšo		I/O
52	MIPI_TX/RX_D1P	MIPI data pair 1 ponts'o e ntle ea pontšo		I/O
53	MIPI_TX/RX_D3P	MIPI data pair 3 ponts'o e ntle ea pontšo		I/O
54	GND	Sebaka sa Matla		P
55	MIPI_TX/RX_D3N	MIPI data pair 3 tlhahiso e mpe ea lets'oao		I/O
56	DVP_PWR		GPIO0_C1_d	I/O
57	HSIC_STROBE	HSIC_STROBE
58	HSIC_DATA	HSIC_DATA
59	GND	Sebaka sa Matla		P
60	CIF_D1		GPIO2_B5_d	I/O
61	CIF_D0		GPIO2_B4_d	I/O
62	CIF_D3	HOST_D1 kapa TS_D1	GPIO2_A1_d	I/O
63	CIF_D2	HOST_D0 kapa TS_D0	GPIO2_A0_d	I/O
64	CIF_D5	HOST_D3 kapa TS_D3	GPIO2_A3_d	I/O
65	CIF_D4	HOST_D2 kapa TS_D2	GPIO2_A2_d	I/O
66	CIF_D7	HOST_CKINN kapa TS_D5	GPIO2_A5_d	I/O
67	CIF_D6	HOST_CKINP kapa TS_D4	GPIO2_A4_d	I/O

Pin (J1)	Lebitso la lets'oao	Fuction 1	Fuction 2	Mofuta oa IO
68	CIF_D9	HOST_D5 kapa TS_D7	GPIO2_A7_d	I/O
69	CIF_D8	HOST_D4 kapa TS_D6	GPIO2_A6_d	I/O
70	CIF_PDN0		GPIO2_B7_d	I/O
71	CIF_D10		GPIO2_B6_d	I/O
72	CIF_HREF	HOST_D7 kapa TS_VALID	GPIO2_B1_d	I/O
73	CIF_VSYNC	HOST_D6 kapa TS_SYNC	GPIO2_B0_d	I/O
74	CIF_CLKOUT	HOST_WKREQ kapa TS_FAIL	GPIO2_B3_d	I/O
75	CIF_CLKIN	HOST_WKACK kapa GPS_CLK kapa TS_CLKOUT	GPIO2_B2_d	I/O
76	I2C3_SCL		GPIO2_C0_u	I/O
77	I2C3_SDA		GPIO2_C1_u	I/O
78	GND	Sebaka sa Matla		P
79	GPIO0_B2_D	OTP_OUT	GPIO0_B2_d	I/O
80	GPIO7_A3_D		GPIO7_A3_d	I/O
81	GPIO7_A6_U		GPIO7_A6_u	I/O
82	GPIO0_A6_U		GPIO0_A6_u	I/O
83	LED0_AD0	PHYAD0
84	LED1_AD1	PHYAD1
85	VCC_LAN	Phepelo ea Matla a Ethernet 3.3V
86	PS2_DATA	Lintlha tsa PS2	GPIO8_A1_u	I/O
87	PS2_CLK	Oache ea PS2	GPIO8_A0_u	I/O
88	ADC0_IN			I
89	GPIO0_A7_U		PMUGPIO0_A7_u	I/O
90	ADC1_IN	PUSELETSO MOLAPO		I
91	VCCIO_SD	SD Card matla Phepelo 3.3V
92	ADC2_IN			I
93	VCC_CAM	Matla a 1.8V
94	VCCA_33	Matla a 3.3V
95	VCC_18	Matla a 1.8V
96	VCC_RTC	Phepelo ea Matla a Nako ea Sebele
97	VCC_IO	3.3V
98	GND	Sebaka sa Matla		P
99	VCC_IO	3.3V
100	GND	Sebaka sa Matla		P

Pin (J2)	Lebitso la lets'oao	Fuction 1	Fuction 2	Mofuta oa IO
1	VCC_SYS	Phepelo ea Matla a Sisteme 3.6 ~ 5V
2	GND	Sebaka sa Matla
3	VCC_SYS	Phepelo ea Matla a Sisteme 3.6 ~ 5V
4	GND	Sebaka sa Matla

Pin (J2)	Lebitso la lets'oao	Fuction 1	Fuction 2	Mofuta oa IO
5	NRETSENG	Sesebelisoa sa Sisteme		I
6	MDI0 +	100M/1G Ethernet MDI0+
7	MDI1 +	100M/1G Ethernet MDI1+
8	MDI0-	100M/1G Ethernet MDI0-
9	MDI1-	100M/1G Ethernet MDI1-
10	IR_INT	PWM CH0	GPIO7_A0_d	I/O
11	MDI2 +	100M/1G Ethernet MDI2+
12	MDI3 +	100M/1G Ethernet MDI3+
13	MDI2-	100M/1G Ethernet MDI2-
14	MDI3-	100M/1G Ethernet MDI3-
15	GND	Sebaka sa Matla		P
16	RST_KEY	Sesebelisoa sa Sisteme		I
17	SDIO0_CMD		GPIO4_D0_u	I/O
18	SDIO0_D0		GPIO4_C4_u	I/O
19	SDIO0_D1		GPIO4_C5_u	I/O
20	SDIO0_D2		GPIO4_C6_u	I/O
21	SDIO0_D3		GPIO4_C7_u	I/O
22	SDIO0_CLK		GPIO4_D1_d	I/O
23	BT_WAKE	SDIO0_DET	GPIO4_D2_u	I/O
24	SDIO0_WP		GPIO4_D3_d	I/O
25	WIFI_REG_ON	SDIO0_PWR	GPIO4_D4_d	I/O
26	BT_HOST_WAKE		GPIO4_D7_u	I/O
27	WIFI_HOST_WAKE	SDIO0_INTn	GPIO4_D6_u	I/O
28	BT_RST	SDIO0_BKPWR	GPIO4_D5_d	I/O
29	SPI2_CLK	SC_IO_T1	GPIO8_A6_d	I/O
30	SPI2_CSn0	SC_DET_T1	GPIO8_A7_u	I/O
31	SPI2_RXD	SC_RST_T1	GPIO8_B0_d	I/O
32	SPI2_TXD	SC_CLK_T1	GPIO8_B1_d	I/O
33	OTG_VBUS_DRV		GPIO0_B4_d	I/O
34	HOST_VBUS_DRV		GPIO0_B6_d	I/O
35	UART0_RX		GPIO4_C0_u	I/O
36	UART0_TX		GPIO4_C1_d	I/O
37	GND	Sebaka sa Matla		P
38	UART0_CTS		GPIO4_C2_u	I/O
39	OTG_DM
40	UART0_RTS		GPIO4_C3_u	I/O
41	OTG_DP
42	OTG_ID
43	HOST1_DM	USB host host port 1 data e mpe

Pin (J2)	Lebitso la lets'oao	Fuction 1	Fuction 2	Mofuta oa IO
44	OTG_DET
45	HOST1_DP	USB host host port 1 data e ntle
46	HOST2_DM	USB host host port 2 data e mpe
47	SPI0_CSn0	UART4_RTSn kapa TS0_D5	GPIO5_B5_u	I/O
48	HOST2_DP	USB host host port 2 data e ntle
49	SPI0_CLK	UART4_CTSn kapa TS0_D4	GPIO5_B4_u	I/O
50	GND	Sebaka sa Matla		P
51	SPI0_UART4_RXD	UART4_RX kapa TS0_D7	GPIO5_B7_u	I/O
52	SPI0_UART4_TXD	UART4_TX kapa TS0_D6	GPIO5_B6_d	I/O
53	GND	Sebaka sa Matla		P
54	TS0_SYNC	SPI0_CSn1	GPIO5_C0_u	I/O
55	UART1_CTSn	TS0_D2	GPIO5_B2_u	I/O
56	UART1_RTSn	TS0_D3	GPIO5_B3_u	I/O
57	UART1_RX_TS0_D0	TS0_D0	GPIO5_B0_u	I/O
58	UART1_TX	TS0_D1	GPIO5_B1_d	I/O
59	TS0_CLK		GPIO5_C2_d	I/O
60	TS0_VALID		GPIO5_C1_d	I/O
61	TS0_ERR		GPIO5_C3_d	I/O
62	GPIO7_B4_U	ISP_SHUTTEREN kapa SPI1_CLK	GPIO7_B4_u	I/O
63	SDMMC_CLK	JTAG_TDO	GPIO6_C4_d	I/O
64	GND	Sebaka sa Matla		P
65	SDMMC_D0	JTAG_TMS	GPIO6_C0_u	I/O
66	SDMMC_CMD		GPIO6_C5_u	I/O
67	SDMMC_D2	JTAG_TDI	GPIO6_C2_u	I/O
68	SDMMC_D1	JTAG_TRSTN	GPIO6_C1_u	I/O
69	SDMMC_DET		GPIO6_C6_u	I/O
70	SDMMC_D3	JTAG_TCK	GPIO6_C3_u	I/O
71	SDMMC_PWR	eDP_HOTPLUG	GPIO7_B3_d	I/O
72	GPIO0_B5_D	Kakaretso IO		I/O
73	GND	Sebaka sa Matla		P
74	GPIO7_B7_U	ISP_SHUTTERTRIG	GPIO7_B7_u	I/O
75	I2S_SDI		GPIO6_A3_d	I/O
76	I2S_MCLK		GPIO6_B0_d	I/O
77	I2S_SCLK		GPIO6_A0_d	I/O
78	I2S_LRCK_RX		GPIO6_A1_d	I/O
79	I2S_LRCK_TX		GPIO6_A2_d	I/O
80	I2S_SDO0		GPIO6_A4_d	I/O
81	I2S_SDO1		GPIO6_A5_d	I/O
82	I2S_SDO2		GPIO6_A6_d	I/O

Pin (J2)	Lebitso la lets'oao	Fuction 1	Fuction 2	Mofuta oa IO
83	I2S_SDO3		GPIO6_A7_d	I/O
84	SPDIF_TX		GPIO6_B3_d	I/O
85	I2C2_SDA		GPIO6_B1_u	I/O
86	GND	Sebaka sa Matla		P
87	I2C1_SDA	SC_RST	GPIO8_A4_u	I/O
88	I2C2_SCL		GPIO6_B2_u	I/O
89	I2C4_SDA		GPIO7_C1_u	I/O
90	I2C1_SCL	SC_CLK	GPIO8_A5_u	I/O
91	UART2_RX	IR_RX kapa PWM2	GPIO7_C6_u	I/O
92	I2C4_SCL		GPIO7_C2_u	I/O
93	UART3_RX	GPS_MAG kapa HSADC_D0_T1	GPIO7_A7_u	I/O
94	UART2_TX	IR_TX kapa PWM3 kapa EDHDMI_CEC	GPIO7_C7_u	I/O
95	UART3_RTSn		GPIO7_B2_u	I/O
96	UART3_TX	GPS_SIG kapa HSADC_D1_T1	GPIO7_B0_d	I/O
97	PWM1		GPIO7_A1_d	I/O
98	UART3_CTSn	GPS_RFCLK kapa GPS_CLK_T1	GPIO7_B1_u	I/O
99	PWR_KEY			I
100	GPIO7_C5_D		GPIO7_C5_d	I/O

Mokhoa oa ho sebelisa module ea MINI3288

Lihokelo

PCB boholo ba lihokelo

Setšoantšo sa lihokelo

Potoloho ea Battery ea RTC

Potoloho ea SATA

Potoloho ea Matla

SD Interface Circuit

Karete ea SD (Security Digital) ke mofuta oa karete e sebelisoang haholo. Potoloho e boletsoeng sethaleng e tšehetsa mosebetsi oa ho bala le ho ngola oa karete ea SD.

Ethernet Interface Circuit

Audio Codec Circuit

Pontšo ea Potoloho

USB Interface Circuit

Wi-Fi / BT Circuit

Potoloho ea GPS

Potoloho ea 4G

Potoloho ea HDMI

Litokomane / Lisebelisoa

BOARDCON MINI3288 Boto e le 'ngoe ea Khomphutha e Tsamaisa Android [pdf] Bukana ea Mosebelisi MINI3288 Boto e le 'ngoe ea Khomphutha e Tsamaisa Android, MINI3288, Boto e le 'ngoe ea Khomphutha e Tsamaisa Android, Boto ea Khomphutha e Tsamaisa Android, Khomphutha e Tsamaisa Android, e Runs Android, Android

Litšupiso

• Bukana ea Mosebelisi