BenQ SH753P Projector RS232 Taolo ea Taolo
Litlhaloso
- Lebitso la Sehlahisoa: SH753P Projector RS232 Taolo ea Taelo
- Lisebelisoa tse lumellanang: Li-projeke tsa BenQ
- Lihokelo: RS232 serial port, LAN port, HDBaseT sesebelisoa se lumellanang
- Sekhahla sa Baud: 9600 / 14400 / 19200 / 38400 / 57600 / 115200* bps (*Sekhahla sa Baud sa kamehla)
- Bolelele ba data: 8 bit
- Parity Check: Ha ho letho
- Stop Bit: 1 bit
- Taolo ea Phallo: Ha ho letho
Litaelo tsa Tšebeliso ea Sehlahisoa
Tlhophiso ea Mohala
P1:
- Pin 1: E ntšo
- Pin 2: Brown
- Pin 3: Khubelu
- Pin 4: Orange
- Pin 5: Bosehla
- Pin 6: Botala
- Pin 7: Blue
- Pin 8: Pherese
- Pin 9: terata ea Gray Drain
P2:
- Pin 1: E ntšo
- Pin 2: Khubelu
- Pin 3: Brown
- Pin 4: Orange
- Pin 5: Bosehla
- Pin 6: Botala
- Pin 7: Blue
- Pin 8: Pherese
- Pin 9: terata ea Gray Drain
Kabelo ea Pin ea RS232
| Pin | Tlhaloso | Pin | Tlhaloso |
|---|---|---|---|
| 1 | NC | 6 | NC |
| 2 | RXD | 7 | RTS |
| 3 | TXD | 8 | CTS |
| 4 | NC | 9 | NC |
| 5 | GND |
Litlhophiso tsa likhokahano le Lipuisano
RS232 Serial Port e nang le Cable ea Crossover
Hokela tse latelang:
- D-Sub 9 pin (e tona) ho projector ho PC kapa laptop ho sebelisa crossover communication cable (D-Sub 9 pin female).
Litlhophiso:
- Etsa qeto ea lebitso la COM Port le sebelisitsoeng bakeng sa likhokahano tsa RS232 ho Sesebelisoa sa Sesebelisoa.
- Khetha Serial le boema-kepe bo tšoanang ba COM joalo ka boema-kepe ba puisano. Ho sena se fanoeng example, COM6 e khethiloe.
- Qetella ho seta li-port tsa Serial ka litlhophiso tse latelang:
- Sekhahla sa Baud: 9600 / 14400 / 19200 / 38400 / 57600 / 115200* bps
(*Sekhahla sa kamehla sa Baud) - Bolelele ba data: 8 bit
- Parity Check: Ha ho letho
- Stop Bit: 1 bit
- Taolo ea Phallo: Ha ho letho
- Sekhahla sa Baud: 9600 / 14400 / 19200 / 38400 / 57600 / 115200* bps
RS232 ka LAN
Hokela tse latelang:
- Boema-kepe ba RJ45 ho projeke ho ea ho PC kapa laptop ka thapo ea LAN.
Litlhophiso:
- Fumana aterese ea Wired LAN IP ea projeke e hokahantsoeng ho tsoa ho menu ea OSD 'me u netefatse hore projeke le komporo li ka har'a marang-rang a tšoanang.
- Kenya 8000 lebaleng la # TCP port.
RS232 ka HDBaseT
Hokela tse latelang:
- Sesebediswa se sebeletsanang le HDBaseT ho D-Sub 9 pin e projekeng e sebedisa thapo ya RJ45 le D-Sub 9 pin LAN.
Litlhophiso:
- Etsa qeto ea lebitso la COM Port le sebelisitsoeng bakeng sa likhokahano tsa RS232 ho Sesebelisoa sa Sesebelisoa.
- Khetha Serial le boema-kepe bo tšoanang ba COM joalo ka boema-kepe ba puisano. Ho sena se fanoeng example, COM6 e khethiloe.
- Qetella ho seta li-port tsa Serial ka litlhophiso tse latelang:
- Sekhahla sa Baud: 9600 / 14400 / 19200 / 38400 / 57600 / 115200* bps
(*Sekhahla sa kamehla sa Baud) - Bolelele ba data: 8 bit
- Parity Check: Ha ho letho
- Stop Bit: 1 bit
- Taolo ea Phallo: Ha ho letho
- Sekhahla sa Baud: 9600 / 14400 / 19200 / 38400 / 57600 / 115200* bps
Tafole ea Taelo
Litaelo le boits'oaro li ts'oana le taolo ka boema-kepe ba serial.
Selelekela
Tokomane e hlalosa mokhoa oa ho laola projeke ea hau ea BenQ ka RS232 ho tsoa komporong. Latela lits'ebetso ho phethela khokahano le li-setting pele, 'me u shebe tafole ea litaelo bakeng sa litaelo tsa RS232. Mesebetsi le litaelo tse teng li fapana ho ea ka mohlala. Sheba lintlha le bukana ea mosebelisi ea projeke e rekiloeng bakeng sa mesebetsi ea sehlahisoa.
Tlhophiso ea mohala
| Tlhophiso ea Mohala | ||
| P1 | Mmala | P2 |
| 1 | Ntsho | 1 |
| 2 | Brown | 3 |
| 3 | Khubedu | 2 |
| 4 | namunu | 4 |
| 5 | Bosehla | 5 |
| 6 | Botala | 6 |
| 7 | Boputsoa | 7 |
| 8 | Bopherese | 8 |
| 9 | Hlooho | 9 |
| Nyeoe | Khoele ea ho kha | Nyeoe |
Kabelo ea RS232
| Pin | Tlhaloso | Pin | Tlhaloso |
| 1 | NC | 2 | RXD |
| 3 | TXD | 4 | NC |
| 5 | GND | 6 | NC |
| 7 | RTS | 8 | CTS |
| 9 | NC |
Litlhophiso tsa likhokahano le lipuisano
Khetha e 'ngoe ea likhokahano 'me u e hlophise hantle pele RS232 e laola.
RS232 serial port e nang le thapo ea crossover
Litlhophiso
Litšoantšo tse skrineng tokomaneng ena ke tsa litšupiso feela. Lits'oants'o li ka fapana ho latela Sistimi ea Ts'ebetso, likou tsa I/O tse sebelisetsoang ho hokela, le lintlha tsa projeke e hokahaneng.
- Fumana lebitso la COM Port e sebelisoang bakeng sa likhokahano tsa RS232 ho Motsamaisi oa Sesebelisoa
- Khetha Serial le boema-kepe bo tšoanang ba COM joalo ka boema-kepe ba puisano. Ho sena se fanoeng example, COM6 e khethiloe.
- Qetella ho seta serial port
Sekhahla sa Baud 9600 / 14400 / 19200 / 38400 / 57600 / 115200* bps * Sekhahla sa kamehla sa Baud
Bolelele ba data 8 hanyane Ho hlahloba bonngoe Ha ho letho Emisa hanyane 1 hanyane Taolo ea phallo Ha ho letho
RS232 ka LAN
Litlhophiso
- Fumana aterese ea Wired LAN IP ea projeke e hokahantsoeng ho tsoa ho menu ea OSD 'me u netefatse hore projeke le komporo li ka har'a marang-rang a tšoanang.
- Kenya 8000 lebaleng la # TCP port.
RS232 ka HDBaseT
Litlhophiso
- Fumana lebitso la COM Port e sebelisoang bakeng sa likhokahano tsa RS232 ho Motsamaisi oa Sesebelisoa
- Khetha Serial le boema-kepe ba CO M bo tšoanang e le boema-kepe ba puisano. Ho sena se fanoeng example, COM6 e khethiloe.
- Qetella ho seta serial port
Sekhahla sa Baud 9600 / 14400 / 19200 / 38400 / 57600 / 115200* bps * Sekhahla sa kamehla sa Baud
Bolelele ba data 8 hanyane Ho hlahloba bonngoe Ha ho letho Emisa hanyane 1 hanyane Taolo ea phallo Ha ho letho
Tafole ea taelo
- Likarolo tse teng li fapana ho ea ka litlhaloso tsa projeke, mehloli ea ho kenya, litlhophiso, joalo-joalo.
- Litaelo li sebetsa haeba matla a standby a le 0.5W kapa sekhahla sa baud se tšehetsoeng sa projector se behiloe.
- Litlhaku tse kholo, tse nyane, le motsoako oa mefuta e 'meli ea litlhaku li amoheloa bakeng sa taelo.
- Haeba sebopeho sa taelo se se molaong, se tla tšoana le sebopeho se seng molaong.
- Haeba taelo e nang le sebopeho se nepahetseng e sa sebetse bakeng sa mofuta oa projeke, e tla bua ka ntho e sa tšehetsoeng.
- Haeba taelo e nang le sebopeho se nepahetseng e ke ke ea etsoa tlas'a maemo a itseng, e tla lumellana le ntho ea Block.
- Haeba taolo ea RS232 e etsoa ka LAN, taelo e sebetsa hore na e qala ebe e qetella ka . Litaelo tsohle le boits'oaro li ts'oana le taolo ka boema-kepe ba serial.
| Mosebetsi | Mofuta | Tshebetso | ASCII | Tšehetso |
|
Matla |
Ngola | Matla On | *pow=on# | Ee |
| Ngola | Ho tima | *pow=theoha# | Ee | |
| Bala | Boemo ba Matla | *pow=?# | Ee | |
|
Khetho ea Mohloli |
Ngola | K'Homphieutha / YPbPr | *bolila=RGB# | Ee |
| Ngola | K'Homphieutha 2 / YPbPr2 | *bolila=RGB2# | NA | |
| Ngola | K'Homphieutha 3 / YPbPr3 | *bolila=RGB3# | NA | |
| Ngola | Karolo | *bolila=ypbr# | NA | |
| Ngola | Karolo2 | *bolila=ypbr2# | NA | |
| Ngola | DVI-A | *bolila=dviA# | NA | |
| Ngola | DVI-D | *bolila=dvid# | NA | |
| Ngola | HDMI/MHL | *bolila=hdmi# | Ee | |
| Ngola | HDMI 2/MHL2 | *bolila=hdmi2# | Ee | |
| Ngola | Motsoako | *bolila=video# | Ee | |
| Ngola | S-Video | *bolila=svid# | Ee | |
| Ngola | Marang-rang | *bolila=netweke# | NA | |
| Ngola | Pontšo ea USB | *bolila=usbdisplay# | NA | |
| Ngola | Sebali sa USB | *bolila=usbreader# | NA | |
| Ngola | Wireless | *bolila=wireless# | NA | |
| Ngola | HDbaseT | *bolila=hdbaset# | NA | |
| Ngola | DisplayPort | *bolila=dp# | NA | |
| Bala | Mohloli oa hajoale | *bolila=?# | Ee | |
|
Taolo ya Mantswe |
Ngola | Khutsisa | *khutsa=ho# | Ee |
| Ngola | Khutsa | *khutsa=tima# | Ee | |
| Bala | Boemo ba Limumu | *mumu=?# | Ee | |
| Ngola | Buka ea + | *vol=+# | Ee | |
| Ngola | Bolumo - | *vol=-# | Ee |
| Bala | Boemo ba Buka | *vol=?# | Ee | |
| Ngola | Mic. Buka + | *microvol=+# | Ee | |
| Ngola | Mic. Buka ea - | *microvol=-# | Ee | |
| Bala | Mic. Boemo ba Buka | *micvol=?# | Ee | |
|
Mohloli oa molumo khetha |
Ngola | Phallo ea molumo e tima | *molumo=theoha# | Ee |
| Ngola | Audio-Khomphutha1 | *audiosour=RGB# | Ee | |
| Ngola | Audio-Khomphutha2 | *audiosour=RGB2# | NA | |
| Ngola | Audio-Video / S-Video | *audiosour=video# | Ee | |
| Ngola | Audio-Karolo | *audiosour=ypbr# | NA | |
| Ngola | Audio-HDMI | *audiosour=hdmi# | Ee | |
| Ngola | Audio-HDMI2 | *audiosour=hdmi2# | Ee | |
| Bala | Palo ea audio | *molumo=?# | Ee | |
|
Mokhoa oa Litšoantšo |
Ngola | Matla | *appmod=matla# | NA |
| Ngola | Nehelano | *appmod=preset# | Ee | |
| Ngola | sRGB | *appmod=srgb# | Ee | |
| Ngola | E kganyang | *appmod=e khanyang# | Ee | |
| Ngola | Kamoreng ea phomolo | *appmod=kamore ea ho phomola# | NA | |
| Ngola | Papali | *appmod=papali# | NA | |
| Ngola | Cinema | *appmod=cine# | Ee | |
| Ngola | E tloaelehileng / e hlakileng | *appmod=std# | NA | |
| Ngola | Bolo ea maoto | *appmod=bolo# | NA | |
| Ngola | Bolo ea maoto e khanyang | *appmod=bolobt# | NA | |
| Ngola | DICOM | *appmod=dicom# | NA | |
| Ngola | TANKI | *appmod=thx# | NA | |
| Ngola | Mokhoa oa ho khutsa | *appmod=ho khutsa# | NA | |
| Ngola | Mokhoa oa DCI-P3 | *appmod=dci-p3# | NA | |
| Ngola | Mosebedisi1 | *appmod=user1# | Ee | |
| Ngola | Mosebedisi2 | *appmod=user2# | Ee | |
| Ngola | Mosebedisi3 | *appmod=user3# | NA | |
| Ngola | Letsatsi la ISF | *appmod=isfday# | NA | |
| Ngola | Bosiu ba ISF | *appmod=isfnight# | NA | |
| Ngola | ISF Night 3D Vivid | *appmod=isfnight#
*appmod=tse tharo# *appmod=e hlakileng# |
Ho joalo:
Ka ho kenya letsoho |
|
| Ngola | infographic | *appmod= infographic # | Ee | |
| Bala | Mokhoa oa Litšoantšo | *appmod=?# | Ee | |
| Setšoantšo | Ngola | Bapisa + | *con=+# | Ee |
| Tlhophiso | Ngola | Phapang - | *con=-# | Ee |
| Bala | Phapang boleng | *con=?# | Ee | |
| Ngola | Khanya + | *bri=+# | Ee | |
| Ngola | Khanya - | *bri=-# | Ee | |
| Bala | Boleng ba khanya | *bri=?# | Ee | |
| Ngola | Mala + | *mmala=+# | Ee | |
| Ngola | Mmala – | *mmala=-# | Ee | |
| Bala | Boleng ba mebala | *mmala=?# | Ee | |
| Ngola | Khalefo + | *bohale=+# | Ee | |
| Ngola | ho hlaka - | *bohale=-# | Ee | |
| Bala | Sharpness value | *bohale=?# | Ee | |
|
Ngola |
Mmala
Mocheso-Mofuthu r |
*ct=mofuthu# | NA | |
| Ngola | Mmala
Mocheso-Mofuthu |
*ct=mofuthu# | Ee | |
| Ngola | Mmala
Mocheso-Tlwaelehileng |
*ct=tloaelehileng# | Ee | |
| Ngola | Mocheso oa Mobala-O pholile | *ct=pholile# | Ee | |
| Ngola | Mmala
Mocheso-Mohatsela |
*ct=pholile# | NA | |
|
Ngola |
Mmala
Mocheso-lamp letsoalloa |
*ct=native# | NA | |
| Bala | Boemo ba Mocheso oa Mobala | *ct=?# | Ee | |
| Ngola | Karolo 4:3 | *asp=4:3# | Ee | |
| Ngola | Karolo 16:6 | *asp=16:6# | NA | |
| Ngola | Karolo 16:9 | *asp=16:9# | Ee | |
| Ngola | Karolo 16:10 | *asp=16:10# | Ee | |
| Ngola | Tšobotsi Auto | *asp=AUTO# | Ee | |
| Ngola | Tšobotsi ea Sebele | *asp=NETE# | Ee | |
| Ngola | Tšobotsi Boxbox | *asp=LBOX# | NA | |
| Ngola | Tšobotsi Wide | *asp=WIDE# | NA | |
| Ngola | Tšobotsi Anamorphic | *asp=ANAM# | NA | |
| Bala | Boemo ba Boemo | *asp=?# | Ee | |
| Ngola | Katametso ea Digital | *zoomI# | Ee |
| Ngola | Digital Zoom out | *zoomO# | Ee | |
| Ngola | Auto | *auto# | Ee | |
| Ngola | Mmala o kganyang o on | *BC=ka# | Ee | |
| Ngola | Mmala o khanyang o tima | *BC=theoha# | Ee | |
| Bala | Boemo bo khanyang ba 'mala | *BC=?# | Ee | |
|
Litlhophiso tsa Ts'ebetso |
Ngola | Projector
Tafole ea Boemo-Ka Pele |
*pp=FT# | Ee |
| Ngola | Projector
Tafole ea Boemo-Ka morao |
*pp=RE# | Ee | |
| Ngola | Projector
Boemo-ka Morao Siling |
*pp=RC# | Ee | |
| Ngola | Projector
Siling ea Boemo-Ka Pele |
*pp=FC# | Ee | |
| Ngola | Patlo e potlakileng ea koloi | *QAS=ka# | Ee | |
| Ngola | Patlo e potlakileng ea koloi | *QAS=theoha# | Ee | |
| Bala | Boemo ba ho batla ka potlako | *QAS=?# | Ee | |
| Bala | Boemo ba Boemo ba Projector | *pp=?# | Ee | |
| Ngola | Motlakase ka ho Otloloha | *matla a tobileng=ho# | Ee | |
| Ngola | Ho tima Motlakase ka ho Otloloha | *directpower=tima# | Ee | |
| Bala | Matla a Otlolohileng On-Boemo | *matla a tobileng=?# | Ee | |
| Ngola | Letšoao la Matla a ho sebetsa | *matla a iketsang=ho # | Ee | |
| Ngola | Matla a Pontšo a Buletsoe | *autopower=tima# | Ee | |
| Bala | Matla a Signal On-Boemo | *matla a iketsang=?# | Ee | |
| Ngola | Ema haufi
Litlhophiso-Network on |
*standbynet=ho# | Ee | |
| Ngola | Ema haufi
Litlhophiso-Network e tima |
*standbynet=tima# | Ee | |
| Bala | Ema haufi
Litlhophiso-Boemo ba Marang-rang |
*standbynet=?# | Ee | |
| Ngola | Ema haufi
Litlhophiso-Maekerofounu on |
*standbymic=ho# | Ee | |
| Ngola | Ema haufi | *standbymic=off# | Ee |
| Litlhophiso-Maekerofounu e koetsoe | ||||
| Bala | Ema haufi
Litlhophiso-Boemo ba Maikrofono |
*standbymic=?# | Ee | |
| Ngola | Ema haufi
Litlhophiso-Monitor Out on |
*standbymnt=on# | Ee | |
| Ngola | Ema haufi
Litlhophiso-Monitor Out tima |
*maemedi= tima# | Ee | |
| Bala | Ema haufi
Litlhophiso-Monitor Out Status |
*standbymnt=?# | Ee | |
|
Baud Rate |
Ngola | 2400 | *baud=2400# | Ee |
| Ngola | 4800 | *baud=4800# | Ee | |
| Ngola | 9600 | *baud=9600# | Ee | |
| Ngola | 14400 | *baud=14400# | Ee | |
| Ngola | 19200 | *baud=19200# | Ee | |
| Ngola | 38400 | *baud=38400# | Ee | |
| Ngola | 57600 | *baud=57600# | Ee | |
| Ngola | 115200 | *baud=115200# | Ee | |
| Bala | Tekanyo ea hona joale ea Baud | *bothata=?# | Ee | |
|
Lamp Taolo |
Bala | Lamp Hora | *ltim=?# | Ee |
| Bala | Lamp2 Hora | *ltim2=?# | NA | |
| Ngola | Mokhoa o tloaelehileng | *lampm=lnor# | Ee | |
| Ngola | Mokhoa oa Eco | *lampm=eco# | Ee | |
| Ngola | Smart Eco mode(ImageCare) | *lampm=seco# | Ee | |
| Ngola | Smart Eco mode(LampTlhokomelo) | *lampm=seco2# | NA | |
| Ngola | Smart Eco mode(IumenCare) | *lampm=seco3# | NA | |
| Ngola | Mokhoa oa ho fifala | *lampm=dimming# | NA | |
| Ngola | Mokhoa o ikhethileng | *lampm=tloaelo# | NA | |
| Ngola
|
Kopanetsoe khanyang |
*lampm =dualbr# |
NA |
| Ngola | Tekanyo ea hona joale ea Baud | *ltim=?# | NA | |
| Ngola |
Dual Reliable |
*lampm = tse peli# |
NA | |
| Ngola |
Mokhoa o le Mong |
*lampm =single# |
NA | |
| Ngola |
Mofuta o Mong oa Eco |
*lampm =singleeco# |
NA | |
| Bala | Lamp Boemo ba Mokhoa | *lampm=?# | Ee | |
|
Tse ding tsa rona |
Bala | Lebitso la Mohlala | *lebitso la mohlala=?# | Ee |
| Ngola | Hlakola | *se na letho=ho # | Ee | |
| Ngola | Hlakola | *se na letho=thomo# | Ee | |
| Bala | Boemo bo se nang letho | *se na letho=?# | Ee | |
| Ngola | Hatisa On | *qhoqhoa=ho qala# | Ee | |
| Ngola | Hatisa Off | *qhoqhoa=theoha# | Ee | |
| Bala | Freeze Boemo | *qhoqhoa=?# | Ee | |
| Ngola | Lenaneo le tsoetse pele | *lenane=ho# | Ee | |
| Ngola | Lenaneo le Tlohile | *lenane= tima# | Ee | |
| Ngola | Up | *hodimo# | Ee | |
| Ngola | Tlase | *tlase# | Ee | |
| Ngola | Ho lokile | *ho lokile# | Ee | |
| Ngola | Ka ho le letšehali | *ka ho le letšehali# | Ee | |
| Ngola | Kena | *kena# | Ee | |
| Ngola | Sync ea 3D e Tlohile | *3d=theoha# | Ee | |
| Ngola | 3D Auto | *3d=auto# | Ee | |
| Ngola | 3D Sync Top Tlaase | *3d=tb# | Ee | |
| Ngola | Sebopeho sa 3D Sync | *3d=fs# | Ee | |
| Ngola | 3D paka paka | *3d=fp# | Ee |
| Ngola | 3D Lehlakore ka lehlakoreng | *3d=sbs# | Ee | |
| Ngola | 3D inverter e tima | *3d=tsa# | Ee | |
| Ngola | Inverter ea 3D | *3d=iv# | Ee | |
| Ngola | 2D ho isa ho 3D | *3d=2d3d# | NA | |
| Ngola | 3D nVIDIA | *3d=nvidia# | NA | |
| Bala | Boemo ba 3D Sync | *3d=?# | Ee | |
| Ngola | Hole
Moamoheli-ka pele + ka morao |
*rr=fr# | Ee | |
| Ngola | Remote Receiver-ka pele | *rr=f# | Ee | |
| Ngola | Remote Receiver-ka morao | *rr=r# | Ee | |
| Ngola | Remote Receiver-top | *rr=t# | NA | |
| Ngola | Hole
Moamoheli-holimo + ka pele |
*rr=tf# | NA | |
| Ngola | Hole
Moamoheli-holimo + ka morao |
*rr=tr# | NA | |
| Bala | Boemo ba Remote Remote | *rr=?# | Ee | |
| Ngola | Hang-hang On-on | *ka hare=ho# | Ee | |
| Ngola | Hang-hang ea tima | *in=theoha# | Ee | |
| Bala | Boemo ba Hanghang | *tse=?# | Ee | |
| Ngola | Lamp Mokhoa oa ho boloka lintho | *lpsaver=ho# | NA | |
| Ngola | Lamp Mokhoa oa ho Sireletsa | *lpsaver=tima# | NA | |
| Bala | Lamp Boemo ba Mokhoa oa ho Boloka | *lpsaver=?# | NA | |
| Ngola | Projection Log In Code on | *prjlogcode=on# | NA | |
| Ngola | Projection Log In Code e tima | *prjlogcode=theoha# | NA | |
| Bala | Projection Log In Code Boemo | *prjlogcode=?# | NA | |
| Ngola | Ho phatlalatsoa hoa phatlalatsoa | *khaso=ho# | NA | |
| Ngola | Khaso e tima | *phatlalatso=tima# | NA | |
| Bala | Boemo ba Khaso | *phatlalatso=? | NA | |
| Ngola | Ho sibolloa ha sesebelisoa sa AMX | *amxdd=on# | Ee | |
| Ngola | Ho sibolloa ha sesebelisoa sa AMX | *amxdd=theoha# | Ee |
| Bala | Boemo ba Phumano ea Sesebelisoa sa AMX | *amxdd=?# | Ee | |
| Bala | Aterese ea Mac | *macaddr=?# | Ee | |
| Ngola | High Altitude mode e butswe | *Bophahamo=ho# | Ee | |
| Ngola | Boemo ba High Altitude bo timilwe | *Bophahamo=theoha# | Ee | |
| Bala | Boemo ba boemo ba High Altitude | *Boemo bo phahameng=?# | Ee |
Hlokomela: Ts'ebetso e kaholimo e tla fapana ho ea ka mohlala.
Video ea FAQ
- Mokhoa oa ho sebelisa thapo ea RS232 ho etsa taolo ea molumo le taolo ea molumo ho projeke? https://youtu.be/P4F26kEv60U
- U ka sebelisa khokahanyo ea thapo ea RS232 joang ho tima le ho tima projeke? https://youtu.be/faGUvcDBmJE
- Mokhoa oa ho theha khokahano ea cable ea RS232? https://youtu.be/CYJRqyO6K1w
- U ka sebelisa taelo ea RS232 joang ho kopa lebelo la fan le boleng ba mocheso? https://youtu.be/KBXEd-BCDKQ
A na nka laola liprojeke tse ngata ke sebelisa RS232?
Ee, o ka laola liprojeke tse ngata o sebelisa RS232 ka ho hokela projekiti e 'ngoe le e' ngoe sebakeng se arohaneng sa COM komporong ea hau.
Ke litefiso life tse fumanehang tsa baud bakeng sa puisano ea RS232?
Litefiso tse fumanehang tsa baud ke 9600, 14400, 19200, 38400, 57600, le 115200 bps. Sekhahla sa kamehla sa baud ke 115200 bps.
Ke fumana aterese ea IP ea Wired LAN ea projeke e hoketsoeng joang?
U ka fumana aterese ea Wired LAN IP ho tsoa ho menu ea OSD ea projeke.
A na nka laola projekiti ka LAN haeba komporo le projeke li se marang-rang a tšoanang?
Che, komporo le projeke li hloka ho ba marang-rang a tšoanang bakeng sa taolo ea LAN.
Na thapo ea crossover ea hlokahala bakeng sa khokahano ea serial port ea RS232?
Ee, thapo ea crossover ea hlokahala bakeng sa khokahano ea serial port ea RS232.
© 2022 BenQ Corporation
Litokelo tsohle li sirelelitsoe. Litokelo tsa phetoho li bolokiloe. Phetolelo: 1.01-C
Litokomane / Lisebelisoa
 |
BenQ SH753P Projector RS232 Taolo ea Taolo [pdf] SH753P, SH753P Projector RS232 Command Control, SH753P, Projector RS232 Taolo ea Taolo, Taolo ea Taelo ea RS232, Taolo ea Taolo, Taolo |
