BenQ SH753P Projector RS232 Command Control
Zvinotsanangurwa
- Zita reChigadzirwa: SH753P Projector RS232 Command Control
- Zvishandiso Zvinoenderana: BenQ mapurojekita
- Kubatanidza: RS232 serial port, LAN port, HDBaseT inoenderana mudziyo
- Baud Rate: 9600 / 14400 / 19200 / 38400 / 57600 / 115200* bps (*Default Baud rate)
- Data Kureba: 8 bit
- Parity Check: Hapana
- Stop Bit: 1 bit
- Kudzora Kuyerera: Hapana
Mirayiridzo Yekushandiswa Kwechigadzirwa
Wire Arrangement
P1:
- Pin 1: Dema
- Pini 2: Brown
- Pini 3: Tsvuku
- Pini 4: Orange
- Pin 5: Yero
- Pini 6: Green
- Pini 7: Bhuruu
- Pini 8: Purple
- Pin 9: Grey Drain waya
P2:
- Pin 1: Dema
- Pini 2: Tsvuku
- Pini 3: Brown
- Pini 4: Orange
- Pin 5: Yero
- Pini 6: Green
- Pini 7: Bhuruu
- Pini 8: Purple
- Pin 9: Grey Drain waya
RS232 Pin Basa
| Pin | Tsanangudzo | Pin | Tsanangudzo |
|---|---|---|---|
| 1 | NC | 6 | NC |
| 2 | RXD | 7 | RTS |
| 3 | TXD | 8 | CTS |
| 4 | NC | 9 | NC |
| 5 | GND |
Kubatanidza uye Kukurukurirana Settings
RS232 Serial Port ine Crossover Cable
Batanidza zvinotevera:
- D-Sub 9 pini (chirume) pane purojekita kuPC kana laptop uchishandisa crossover yekutaurirana tambo (D-Sub 9 pini yechikadzi).
Settings:
- Sarudza iyo COM Port zita rinoshandiswa kune RS232 kutaurirana muDhijitari Maneja.
- Sarudza Serial uye inoenderana COM chiteshi sechiteshi chekutaurirana. Mune iyi yakapihwa example, COM6 yakasarudzwa.
- Pedzisa Serial port kuseta neanotevera magadzirirwo:
- Baud Rate: 9600 / 14400 / 19200 / 38400 / 57600 / 115200* bps
(*Default Baud rate) - Data Kureba: 8 bit
- Parity Check: Hapana
- Stop Bit: 1 bit
- Kudzora Kuyerera: Hapana
- Baud Rate: 9600 / 14400 / 19200 / 38400 / 57600 / 115200* bps
RS232 kuburikidza neLAN
Batanidza zvinotevera:
- RJ45 chiteshi pane purojekita kuPC kana laptop uchishandisa LAN tambo.
Settings:
- Tsvaga iyo Wired LAN IP kero yeyakabatana purojekita kubva kuOSD menyu uye ita shuwa kuti purojekita nekombuta zviri mukati metiweki imwe chete.
- Pinza 8000 muTCP port # ndima.
RS232 kuburikidza neHDBaseT
Batanidza zvinotevera:
- HDBaseT inoenderana mudziyo kuD-Sub 9 pini papurojekita uchishandisa RJ45 uye D-Sub 9 pini yeLAN tambo.
Settings:
- Sarudza iyo COM Port zita rinoshandiswa kune RS232 kutaurirana muDhijitari Maneja.
- Sarudza Serial uye inoenderana COM chiteshi sechiteshi chekutaurirana. Mune iyi yakapihwa example, COM6 yakasarudzwa.
- Pedzisa Serial port kuseta neanotevera magadzirirwo:
- Baud Rate: 9600 / 14400 / 19200 / 38400 / 57600 / 115200* bps
(*Default Baud rate) - Data Kureba: 8 bit
- Parity Check: Hapana
- Stop Bit: 1 bit
- Kudzora Kuyerera: Hapana
- Baud Rate: 9600 / 14400 / 19200 / 38400 / 57600 / 115200* bps
Raira Tafura
Iyo mirairo uye maitiro akafanana nekutonga kuburikidza ne serial port.
Nhanganyaya
Gwaro rinotsanangura maitiro ekudzora yako BenQ purojekita kuburikidza neRS232 kubva pakombuta. Tevedza maitiro ekupedzisa kubatana uye kuseta kutanga, uye tarisa kune yekuraira tafura yeRS232 mirairo. Mabasa anowanikwa uye mirairo inosiyana nemuenzaniso. Tarisa zvakatemwa uye bhuku remushandisi reyakatengwa purojekita yemabasa echigadzirwa.
Kurongeka kwewaya
| Wire Arrangement | ||
| P1 | Color | P2 |
| 1 | Nhema | 1 |
| 2 | Bhurawuni | 3 |
| 3 | Tsvuku | 2 |
| 4 | Orenji | 4 |
| 5 | Yero | 5 |
| 6 | Girinhi | 6 |
| 7 | Bhuruu | 7 |
| 8 | Pepuru | 8 |
| 9 | Gireyi | 9 |
| Nyaya | Drain waya | Nyaya |
RS232 pini kupihwa
| Pin | Tsanangudzo | Pin | Tsanangudzo |
| 1 | NC | 2 | RXD |
| 3 | TXD | 4 | NC |
| 5 | GND | 6 | NC |
| 7 | RTS | 8 | CTS |
| 9 | NC |
Zvisungo uye zvigadziriso zvekutaurirana
Sarudza imwe yekubatanidza uye gadzira zvakanaka pamberi peRS232 kutonga.
RS232 serial port ine crossover tambo
Settings
Mifananidzo yepa-screen mugwaro rino ndeyekutarisa chete. Iwo masikirini anogona kusiyana zvichienderana neako Operating System, I/O ports inoshandiswa pakubatanidza, uye zvakatemwa zvepurojekita yakabatana.
- Sarudza iyo COM Port zita rinoshandiswa kune iyo RS232 kutaurirana muChishandiso Maneja
- Sarudza Serial uye inoenderana COM chiteshi sechiteshi chekutaurirana. Mune iyi yakapihwa example, COM6 yakasarudzwa.
- Pedzisa Serial port kuseta
Baud rate 9600 / 14400 / 19200 / 38400 / 57600 / 115200* bps *Default Baud mwero
Data urefu 8 zvishoma Parity cheki Hapana Mira zvishoma 1 zvishoma Flow control Hapana
RS232 kuburikidza neLAN
Settings
- Tsvaga iyo Wired LAN IP kero yeyakabatana purojekita kubva kuOSD menyu uye ita shuwa kuti purojekita nekombuta zviri mukati metiweki imwe chete.
- Pinza 8000 muTCP port # ndima.
RS232 kuburikidza neHDBaseT
Settings
- Sarudza iyo COM Port zita rinoshandiswa kune iyo RS232 kutaurirana muDhidhiyo Maneja
- Sarudza Serial uye inoenderana CO M chiteshi sechiteshi chekutaurirana. Mune iyi yakapihwa example, COM6 yakasarudzwa.
- Pedzisa Serial port kuseta
Baud rate 9600 / 14400 / 19200 / 38400 / 57600 / 115200* bps *Default Baud mwero
Data urefu 8 zvishoma Parity cheki Hapana Mira zvishoma 1 zvishoma Flow control Hapana
Command table
- Anowanikwa maficha anosiyana neprojector yakatarwa, masosi ekuisa, marongero, nezvimwe.
- Mirairo iri kushanda kana simba rekumira riri 0.5W kana chiyero chebaud chinotsigirwa cheprojekita chaiswa.
- Mavara makuru, madiki, uye musanganiswa wemhando mbiri dzemavara anogamuchirwa semurairo.
- Kana fomu rekuraira risiri pamutemo, rinoita maungira zvisiri pamutemo fomati.
- Kana murairo une fomati chaiyo usingashande kune purojekita modhi, ichaita maungira Chinhu chisina kutsigirwa.
- Kana murairo une fomati chaiyo usingakwanise kuitwa pasi peimwe mamiriro, unozotaura Block chinhu.
- Kana RS232 control ikaitwa kuburikidza neLAN, murairo unoshanda kana uchitanga uye kupera . Yese mirairo uye maitiro akafanana nekutonga kuburikidza ne serial port.
| Function | Type | Operation | ASCII | Support |
|
Simba |
Nyora | Power On | *pow=pa# | Ehe |
| Nyora | Kudzima | *pow=off# | Ehe | |
| Verenga | Simba Status | *pow=?# | Ehe | |
|
Source Selection |
Nyora | KOMPuta / YPbPr | *svava=RGB# | Ehe |
| Nyora | Komputa 2 / YPbPr2 | *kuvava=RGB2# | NA | |
| Nyora | Komputa 3 / YPbPr3 | *kuvava=RGB3# | NA | |
| Nyora | Chikamu | *kuvava=ypbr# | NA | |
| Nyora | Chikamu2 | *svava=ypbr2# | NA | |
| Nyora | DVI-A | *svava=dviA# | NA | |
| Nyora | DVI-D | *svava=dvid# | NA | |
| Nyora | HDMI/MHL | *svava=hdmi# | Ehe | |
| Nyora | HDMI 2/MHL2 | *svava=hdmi2# | Ehe | |
| Nyora | Composite | *svava=vid# | Ehe | |
| Nyora | S-Vhidhiyo | *kuvava=svid# | Ehe | |
| Nyora | Network | *svava=network# | NA | |
| Nyora | USB Ratidza | *svava=usbdisplay# | NA | |
| Nyora | USB Reader | *svava=usreader# | NA | |
| Nyora | Wireless | *sour=wireless# | NA | |
| Nyora | HDbaseT | *svava=hdbaset# | NA | |
| Nyora | DisplayPort | *kuvava=dp# | NA | |
| Verenga | Current source | *kuvava=?# | Ehe | |
|
Audio Control |
Nyora | Mute On | *nyarara=pa# | Ehe |
| Nyora | Nyarara Off | *nyarara=dzima# | Ehe | |
| Verenga | Chimiro Chinzvimbo | *mute=?# | Ehe | |
| Nyora | Vhoriyamu + | *vol=+# | Ehe | |
| Nyora | Vhoriyamu - | *vol=-# | Ehe |
| Verenga | Mamiriro eVhoriyamu | *vol=?# | Ehe | |
| Nyora | Mik. Vhoriyamu + | *micvol=+# | Ehe | |
| Nyora | Mik. Vhoriyamu - | *micvol=-# | Ehe | |
| Verenga | Mik. Mamiriro eVhoriyamu | *micvol=?# | Ehe | |
|
Audio source sarudza |
Nyora | Audio pass through yadzimwa | *audiosour=off# | Ehe |
| Nyora | Audio-Komputa1 | *audiosour=RGB# | Ehe | |
| Nyora | Audio-Komputa2 | *audiosour=RGB2# | NA | |
| Nyora | Audio-Vhidhiyo / S-Vhidhiyo | *audiosour=vid# | Ehe | |
| Nyora | Audio-Chikamu | *audiosour=ypbr# | NA | |
| Nyora | Audio-HDMI | *audiosour=hdmi# | Ehe | |
| Nyora | Audio-HDMI2 | *audiosour=hdmi2# | Ehe | |
| Verenga | Audio pfuura Status | *audiosour=?# | Ehe | |
|
Mufananidzo Mode |
Nyora | Dynamic | *appmod=simba# | NA |
| Nyora | Presentation | *appmod=preset# | Ehe | |
| Nyora | sRGB | *appmod=srgb# | Ehe | |
| Nyora | Bright | *appmod=yakajeka# | Ehe | |
| Nyora | Imba yekugara | *appmod=imba yekutandarira# | NA | |
| Nyora | Game | *appmod=mutambo# | NA | |
| Nyora | Cinema | *appmod=cine# | Ehe | |
| Nyora | Yakajairwa / Yakajeka | *appmod=std# | NA | |
| Nyora | Bhora | *appmod=nhabvu# | NA | |
| Nyora | Bhora Rakajeka | *appmod=footballbt# | NA | |
| Nyora | DICOM | *appmod=dicom# | NA | |
| Nyora | THX | *appmod=thx# | NA | |
| Nyora | Silence mode | *appmod=kunyarara# | NA | |
| Nyora | DCI-P3 maitiro | *appmod=dci-p3# | NA | |
| Nyora | Mushandisi1 | *appmod=mushandisi1# | Ehe | |
| Nyora | Mushandisi2 | *appmod=mushandisi2# | Ehe | |
| Nyora | Mushandisi3 | *appmod=mushandisi3# | NA | |
| Nyora | Zuva reISF | *appmod=isfday# | NA | |
| Nyora | ISF Husiku | *appmod=isfnight# | NA | |
| Nyora | ISF Night 3D Vivid | *appmod=isfnight#
*appmod=vatatu# *appmod=yakajeka# |
Ehe:
Nekupinza |
|
| Nyora | infographic | * appmod = infographic # | Ehe | |
| Verenga | Mufananidzo Mode | *appmod=?# | Ehe | |
| Mufananidzo | Nyora | Musiyano + | *con=+# | Ehe |
| Setting | Nyora | Kusiyanisa - | *con=-# | Ehe |
| Verenga | Kusiyanisa kukosha | *con=?# | Ehe | |
| Nyora | Kupenya + | *bri=+# | Ehe | |
| Nyora | Kupenya - | *bri=-# | Ehe | |
| Verenga | Kupenya kukosha | *bri=?# | Ehe | |
| Nyora | Ruvara + | *ruvara=+# | Ehe | |
| Nyora | Ruvara - | *ruvara=-# | Ehe | |
| Verenga | Kukosha kwemavara | *ruvara=?# | Ehe | |
| Nyora | Sharp + | *yakapinza=+# | Ehe | |
| Nyora | Kupinza - | *yakapinza=-# | Ehe | |
| Verenga | Kupinza kukosha | *yakapinza=?# | Ehe | |
|
Nyora |
Color
Tembiricha-Kudziya r |
*ct=zvinodziya# | NA | |
| Nyora | Color
Tembiricha-Kudziya |
*ct=kudziya# | Ehe | |
| Nyora | Color
Tembiricha-Zvose |
*ct=zvakajairika# | Ehe | |
| Nyora | Ruvara Tembiricha-Kutonhorera | *ct=cool# | Ehe | |
| Nyora | Color
Tembiricha-Kunotonhorera |
*ct=inotonhorera# | NA | |
|
Nyora |
Color
Tembiricha-lamp native |
*ct= native# | NA | |
| Verenga | Ruvara Tembiricha Mamiriro | *ct=?# | Ehe | |
| Nyora | Chikamu 4:3 | *asp=4:3# | Ehe | |
| Nyora | Chikamu 16:6 | *asp=16:6# | NA | |
| Nyora | Chikamu 16:9 | *asp=16:9# | Ehe | |
| Nyora | Chikamu 16:10 | *asp=16:10# | Ehe | |
| Nyora | Aspect Auto | *asp=AUTO# | Ehe | |
| Nyora | Aspect Chaiye | *asp=CHAICHO# | Ehe | |
| Nyora | Aspect Letterbox | *asp=LBOX# | NA | |
| Nyora | Kuonekwa Kwakakura | *asp=WIDE# | NA | |
| Nyora | Kuonekwa Anamorphic | *asp=ANAM# | NA | |
| Verenga | Aspect Status | *asp=?# | Ehe | |
| Nyora | Dhijitari Zoom In | *zoomI# | Ehe |
| Nyora | Digital Zoom kunze | *zoomO# | Ehe | |
| Nyora | Auto | *auto# | Ehe | |
| Nyora | Ruvara rwakajeka pa | *BC=pa# | Ehe | |
| Nyora | Ruvara rwakapenya rwakadzima | *BC=off# | Ehe | |
| Verenga | Brilliant color chimiro | *BC=?# | Ehe | |
|
Operation Settings |
Nyora | Projector
Position-Front Table |
*pp=FT# | Ehe |
| Nyora | Projector
Position-Rear Tafura |
*pp=RE# | Ehe | |
| Nyora | Projector
Position-Rear Ceiling |
*pp=RC# | Ehe | |
| Nyora | Projector
Position-Front Ceiling |
*pp=FC# | Ehe | |
| Nyora | Kutsvaga otomatiki nekukurumidza | *QAS=pa# | Ehe | |
| Nyora | Kutsvaga otomatiki nekukurumidza | *QAS=off# | Ehe | |
| Verenga | Kurumidza kutsvaga otomatiki mamiriro | *QAS=?# | Ehe | |
| Verenga | Projector Position Status | *pp=?# | Ehe | |
| Nyora | Nongedza Simba On-on | *directpower=pa# | Ehe | |
| Nyora | Kutungamira Simba On-off | *directpower=off# | Ehe | |
| Verenga | Nongedzera Simba Pane-Chinzvimbo | *directpower=?# | Ehe | |
| Nyora | Signal Simba On-on | *autopower=pa# | Ehe | |
| Nyora | Signal Simba Kuvhara | *autopower=off# | Ehe | |
| Verenga | Signal Simba Pa-Chinzvimbo | *autopower=?# | Ehe | |
| Nyora | Mira ne
Settings-Network on |
*standbynet=pa# | Ehe | |
| Nyora | Mira ne
Settings-Network yadzimwa |
*standbynet=off# | Ehe | |
| Verenga | Mira ne
Settings-Network Status |
*standbynet=?# | Ehe | |
| Nyora | Mira ne
Settings-Maikorofoni on |
*standbymic=pa# | Ehe | |
| Nyora | Mira ne | *standbymic=off# | Ehe |
| Settings-Makrofoni yakadzimwa | ||||
| Verenga | Mira ne
Zvirongwa-Maikorofoni Status |
*standbymic=?# | Ehe | |
| Nyora | Mira ne
Settings-Monitor Out on |
*standbymnt=pa# | Ehe | |
| Nyora | Mira ne
Zvirongwa-Monitor Out off |
*standbymnt=off# | Ehe | |
| Verenga | Mira ne
Zvirongwa-Monitor Out Status |
*standbymnt=?# | Ehe | |
|
Baud Rate |
Nyora | 2400 | *baud=2400# | Ehe |
| Nyora | 4800 | *baud=4800# | Ehe | |
| Nyora | 9600 | *baud=9600# | Ehe | |
| Nyora | 14400 | *baud=14400# | Ehe | |
| Nyora | 19200 | *baud=19200# | Ehe | |
| Nyora | 38400 | *baud=38400# | Ehe | |
| Nyora | 57600 | *baud=57600# | Ehe | |
| Nyora | 115200 | *baud=115200# | Ehe | |
| Verenga | Ikozvino Baud Rate | *baud=?# | Ehe | |
|
Lamp Kudzora |
Verenga | Lamp Awa | *ltim=?# | Ehe |
| Verenga | Lamp2 Awa | *ltim2=?# | NA | |
| Nyora | Normal mode | *lampm=lnor# | Ehe | |
| Nyora | Eco mode | *lampm=eco# | Ehe | |
| Nyora | Smart Eco mode (ImageCare) | *lampm=seco# | Ehe | |
| Nyora | Smart Eco mode (LampCare) | *lampm=seco2# | NA | |
| Nyora | Smart Eco mode (IumenCare) | *lampm=seco3# | NA | |
| Nyora | Dimming modhi | *lampm=kudzima# | NA | |
| Nyora | Custom mode | *lampm=tsika# | NA | |
| Nyora
|
Dual Kupenya |
*lampm =dualbr# |
NA |
| Nyora | Ikozvino Baud Rate | *ltim=?# | NA | |
| Nyora |
Dual Reliable |
*lampm = mbiri# |
NA | |
| Nyora |
Single Alternative |
*lampm = single# |
NA | |
| Nyora |
Imwe Yakasarudzika Eco |
*lampm =singleeco# |
NA | |
| Verenga | Lamp Mamiriro Emamiriro | *lampm=?# | Ehe | |
|
Zvimwe zvedu |
Verenga | Model Name | *zita remuenzaniso=?# | Ehe |
| Nyora | Blank On | *isina chinhu=pa# | Ehe | |
| Nyora | Bvisa | *isina chinhu=yakadzima# | Ehe | |
| Verenga | Blank Status | *isina chinhu=?# | Ehe | |
| Nyora | Kusunungura On | *freeze=on# | Ehe | |
| Nyora | Kusunungura Kure | *freeze=off# | Ehe | |
| Verenga | Freeze Status | *chando=?# | Ehe | |
| Nyora | Menyu Yakavhurwa | *menu=pa# | Ehe | |
| Nyora | Menyu Yabviswa | *menu=off# | Ehe | |
| Nyora | Up | *kumusoro# | Ehe | |
| Nyora | Pasi | *pasi# | Ehe | |
| Nyora | Rudyi | *rudyi# | Ehe | |
| Nyora | Ruboshwe | *ruboshwe# | Ehe | |
| Nyora | Enter | *pinda# | Ehe | |
| Nyora | 3D Sync Yadzimwa | *3d=kubva# | Ehe | |
| Nyora | 3D Auto | *3d=motokari# | Ehe | |
| Nyora | 3D Sync Pamusoro Pazasi | *3d=tb# | Ehe | |
| Nyora | 3D Sync Chimiro Sequential | *3d=fs# | Ehe | |
| Nyora | 3D Chimiro kurongedza | *3d=fp# | Ehe |
| Nyora | 3D Kurutivi | *3d=sbs# | Ehe | |
| Nyora | 3D inverter disable | *3d=da# | Ehe | |
| Nyora | 3D inverter | *3d=iv# | Ehe | |
| Nyora | 2D kusvika 3D | *3d=2d3d# | NA | |
| Nyora | 3D nVIDIA | *3d=nvidia# | NA | |
| Verenga | 3D Sync Mamiriro | *3d=?# | Ehe | |
| Nyora | Remote
Receiver-mberi+kumashure |
*rr=fr# | Ehe | |
| Nyora | Remote Receiver-kumberi | *rr=f# | Ehe | |
| Nyora | Remote Receiver-kumashure | *rr=r# | Ehe | |
| Nyora | Remote Receiver-pamusoro | *rr=t# | NA | |
| Nyora | Remote
Receiver-yepamusoro + pamberi |
*rr=tf# | NA | |
| Nyora | Remote
Receiver-yepamusoro + kumashure |
*rr=tr# | NA | |
| Verenga | Remote Receiver Status | *rr=?# | Ehe | |
| Nyora | Pakarepo On-on | *in=pa# | Ehe | |
| Nyora | Pakarepo On-off | *ins=off# | Ehe | |
| Verenga | Pakarepo Pane Chinzvimbo | *ins=?# | Ehe | |
| Nyora | Lamp Saver Mode-on | *lpsaver=pa# | NA | |
| Nyora | Lamp Saver Mode-off | *psaver=off# | NA | |
| Verenga | Lamp Saver Mode Mamiriro | *lsaver=?# | NA | |
| Nyora | Projection Log In Code on | *prjlogcode=pa# | NA | |
| Nyora | Projection Log In Code yadzimwa | *prjlogcode=off# | NA | |
| Verenga | Projection Log In Code Status | *prjlogcode=?# | NA | |
| Nyora | Broadcasting on | *kushambadza=pa# | NA | |
| Nyora | Kutepfenyura kwakadzimwa | *kuparidzirwa=kudzima# | NA | |
| Verenga | Broadcasting Status | *kutepfenyura=? | NA | |
| Nyora | AMX Chishandiso Discovery-on | *amxdd=pa# | Ehe | |
| Nyora | AMX Chishandiso Kuwanikwa-kure | *amxdd=off# | Ehe |
| Verenga | AMX Chishandiso Discovery Mamiriro | *amxdd=?# | Ehe | |
| Verenga | Mac Kero | *macaddr=?# | Ehe | |
| Nyora | High Altitude mode yakabatidzwa | *Kukwirira=pa# | Ehe | |
| Nyora | High Altitude mode yadzimwa | *Kukwirira = kure# | Ehe | |
| Verenga | High Altitude mode mamiriro | *Kukwirira=?# | Ehe |
Cherechedza: Basa riri pamusoro richasiyana kubva kune modhi kuenda kune modhi.
FAQ's Vhidhiyo
- Maitiro ekushandisa iyo RS232 tambo kuita vhoriyamu kutonga uye kudzora ruzha pane purojekita? https://youtu.be/P4F26kEv60U
- Maitiro ekushandisa RS232 tambo yekubatanidza kune simba pa & kudzima purojekita? https://youtu.be/faGUvcDBmJE
- Maitiro ekuseta RS232 tambo yekubatanidza? https://youtu.be/CYJRqyO6K1w
- Maitiro ekushandisa iyo RS232 kuraira kukumbira fan kumhanya uye tembiricha kukosha? https://youtu.be/KBXEd-BCDKQ
Ini ndinogona kudzora akawanda mapurojekita ndichishandisa RS232?
Ehe, unogona kudzora akawanda mapurojekita uchishandisa RS232 nekubatanidza yega purojekita kune yakaparadzana COM port pakombuta yako.
Ndeapi mabaud anowanikwa eRS232 kutaurirana?
Mabaud anowanikwa 9600, 14400, 19200, 38400, 57600, uye 115200 bps. Iyo default baud mwero ndeye 115200 bps.
Ini ndinowana sei iyo Wired LAN IP kero yeyakabatana purojekita?
Iwe unogona kuwana iyo Wired LAN IP kero kubva kuOSD menyu yepurojekita.
Ndinogona here kudzora purojekita kuburikidza neLAN kana komputa nepurojekita zvisiri kunetiweki imwe chete?
Kwete, komputa uye purojekita inofanirwa kunge iri pane imwecheteyo network yeLAN control.
Iyo crossover tambo inodiwa kune RS232 serial port yekubatanidza?
Ehe, tambo yecrossover inodiwa kune RS232 serial port yekubatanidza.
© 2022 BenQ Corporation
Kodzero dzese dzakachengetwa. Kodzero dzekugadzirisa dzakachengetwa. Shanduro: 1.01-C
Zvinyorwa / Zvishandiso
 |
BenQ SH753P Projector RS232 Command Control [pdf] SH753P, SH753P Projector RS232 Command Control, SH753P, Projector RS232 Command Control, RS232 Command Control, Command Control, Control |
