Beijer Electronics GT-1278 Digital Input Mojule
Litlhaloso
- Mohlala: GT-1278
- Mofuta: Digital Input Mojule
- Mananeo: 8
- Mofuta oa Sensor: Haufinyane
- Mofuta oa ho kenya: Sekela
- Phepelo ea motlakase: 24 VDC
- Hona joale: 6 mA
- Mofuta oa Terminal: 18 pt terminal e ka tlosoang
Litaelo tsa Tšebeliso ea Sehlahisoa
- Ho kenya le ho seta
Pele o qala, etsa bonnete ba hore motlakase o tima. Hokela mojule ho phepelo ea motlakase u sebelisa terminal e fanoeng ea lintlha tse 18. Latela setšoantšo sa lithapo bukeng ea mosebelisi bakeng sa ho instola ka nepo. - Tlhophiso
Hang ha e kentsoe, lokisa module ho latela litlhoko tsa hau. Sheba karolo ea Lintlha tsa Parameter bukeng ea tataiso bakeng sa tataiso ea ho theha liparamente bakeng sa ts'ebetso e nepahetseng. - Tšebeliso
Ho sebelisa GT-1278 Digital Input Module, hokela lisensara tsa hau tse haufi le likanale tse khethiloeng. Netefatsa hore matshwao a ho kenya a tsamaellana le ditlhaloso tse boletsweng bukeng ya bukana. Lipontšo tsa LED li tla bontša boemo ba mocha bakeng sa ho beha leihlo habonolo. - Tlhokomelo
Kamehla hlahloba hore na ha ho na likhokahano tse hlephileng kapa matšoao a ho khathala. Boloka module e hloekile 'me e se na lerōle ho netefatsa ts'ebetso e nepahetseng.
Mabapi le Bukana ena
Bukana ena e na le lintlha tse mabapi le software le likarolo tsa hardware tsa Beijer Electronics GT-1278 Digital Input Module. E fana ka litlhaloso tse tebileng, le tataiso mabapi le ho kenya, ho seta, le tšebeliso ea sehlahisoa.
Matshwao a Sebedisitsweng Bukaneng ena
Sengoliloeng sena se kenyelletsa Temoso, Tlhokomeliso, Tlhokomeliso le matšoao a Bohlokoa moo ho loketseng, ho supa lintlha tse amanang le polokeho, kapa lintlha tse ling tsa bohlokoa. Matšoao a tšoanang a lokela ho hlalosoa ka tsela e latelang:
TLHOKOMELO
Letšoao la Tlhokomeliso le bontša boemo bo ka bang kotsi boo, ha bo sa qojoe, bo ka bakang lefu kapa kotsi e mpe le tšenyo e kholo sehlahisoa.
TLHOKOMELO
Letšoao la Tlhokomeliso le bontša boemo bo ka bang kotsi boo, ha bo sa qojoe, bo ka bakang kotsi e nyane kapa e itekanetseng, le tšenyo e itekanetseng sehlahisoa.
HLOKOMELA
Letšoao la Note le hlokomelisa 'mali ka lintlha le maemo a amehang.
BOHLOKOA
Letšoao la Bohlokoa le totobatsa lintlha tsa bohlokoa.
Polokeho
Pele o sebelisa sehlahisoa sena, ka kopo bala bukana ena le libuka tse ling tse amehang ka hloko. Ela hloko ka botlalo litaelo tsa polokeho!
Na ha ho na ketsahalo na Beijer Electronics e tla ikarabella kapa ho ikarabella bakeng sa tšenyo e bakiloeng ke tšebeliso ea sehlahisoa see?
Litšoantšo, mohlalaamples, le litšoantšo bukeng ena li kenyelelitsoe molemong oa ho etsa litšoantšo. Ka lebaka la mefuta e mengata e fapaneng le litlhoko tse amanang le ts'ebetso efe kapa efe e itseng, Beijer Electronics e ke ke ea nka boikarabello kapa boikarabello bakeng sa ts'ebeliso ea 'nete e ipapisitseng le maemo a khale.amples le litšoantšo.
Setifikeiti sa Sehlahisoa
Sehlahisoa se na le litifikeiti tse latelang tsa sehlahisoa.
Litlhoko tse akaretsang tsa polokeho
TLHOKOMELO
- U se ke ua kopanya lihlahisoa le lithapo ka matla a hokahaneng le sistimi. Ho etsa joalo ho baka "arc flash", e ka fellang ka liketsahalo tse kotsi tse sa lebelloang (ho chesa, mollo, lintho tse fofang, khatello ea ho phatloha, ho phatloha ha molumo, mocheso).
- Se ke oa ama li-terminal blocks kapa li-module tsa IO ha sistimi e sebetsa. Ho etsa joalo ho ka baka ts'okelo ea motlakase, potoloho e khuts'oane, kapa ho se sebetse hantle ha sesebelisoa.
- Le ka mohla u se ke ua lumella lintho tsa tšepe tse ka ntle ho ama sehlahisoa ha tsamaiso e ntse e sebetsa. Ho etsa joalo ho ka baka ts'okelo ea motlakase, potoloho e khuts'oane, kapa ho se sebetse hantle ha sesebelisoa.
- U se ke ua beha sehlahisoa haufi le thepa e tukang. Ho etsa joalo ho ka baka mollo.
- Mosebetsi oohle oa lithapo o lokela ho etsoa ke moenjiniere oa motlakase.
- Ha u sebetsana le li-module, etsa bonnete ba hore batho bohle, sebaka sa mosebetsi le ho paka li thehiloe hantle. Qoba ho ama likarolo tsa conductive, li-module li na le likarolo tsa elektronike tse ka 'nang tsa senngoa ke ho tsoa ha electrostatic.
TLHOKOMELO
- Le ka mohla u se ke ua sebelisa sehlahisoa libakeng tse nang le mocheso o fetang 60℃. Qoba ho beha sehlahisoa letsatsing le tobileng.
- Le ka mohla u se ke ua sebelisa sehlahisoa libakeng tse nang le mongobo o fetang 90%.
- Kamehla sebelisa sehlahisoa libakeng tse nang le tekanyo ea 1 kapa 2 ea tšilafalo.
- Sebelisa likhoele tse tloaelehileng bakeng sa likhoele.
Mabapi le Sistimi ea letoto la G
Tsamaiso e Fetilengview
- Network Adapter Module - Mojule oa adaptara ea marang-rang o theha sehokelo lipakeng tsa bese ea tšimo le lisebelisoa tsa masimong tse nang le li-module tsa katoloso. Khokahano ho litsamaiso tse fapaneng tsa libese tsa masimong e ka theoa ke e 'ngoe le e' ngoe ea li-module tsa adaptara ea marang-rang tse tsamaellanang, mohlala, bakeng sa MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/ Seriali, joalo-joalo.
- Katoloso Mojule - Mefuta ea li-module tsa katoloso: Digital IO, Analog IO, le li-module tse khethehileng.
- Ho romella melaetsa - Sistimi e sebelisa mefuta e 'meli ea melaetsa: Melaetsa ea litšebeletso le melaetsa ea IO.
IO Process Data Mapping
- Mojule oa katoloso o na le mefuta e meraro ea data: data ea IO, paramethara ea tlhophiso, le ngoliso ea memori. Phapanyetsano ea data pakeng tsa adaptara ea marang-rang le li-module tsa ho atolosa li etsoa ka data ea setšoantšo sa IO ka protocol ea ka hare.
Phallo ea data lipakeng tsa adaptara ea marang-rang (li-slots tse 63) le li-module tsa katoloso- Lintlha tsa setšoantšo le se hlahisoang li itšetlehile ka sebaka sa slot le mofuta oa data oa slot ea ho atolosa. Ho hlophisoa ha data ea setšoantšo sa ho kenya le ho tsoa ho ipapisitse le boemo ba sekotjana sa katoloso. Lipalo tsa tlhophiso ena li kenyelelitsoe libukeng tsa li-adapter tsa netweke le li-programmable IO modules.
- Lintlha tse sebetsang tsa parameter li ipapisitse le li-module tse sebelisoang. Bakeng sa mohlalaample, li-module tsa analoge li na le li-setting tsa 0-20 mA kapa 4-20 mA, 'me li-module tsa mocheso li na le li-setting tse kang PT100, PT200, le PT500. Litokomane tsa module ka 'ngoe li hlalosa data ea parameter.
Litlhaloso
Litlhaloso tsa Tikoloho
| Mocheso oa ho sebetsa | -20°C – 60°C |
| UL mocheso | -20°C – 60°C |
| Mocheso oa polokelo | -40°C – 85°C |
| Mongobo o amanang | 5% - 90% e sa lumellaneng |
| Ho phahamisa | DIN seporo |
| Ts'ebetso ea ts'oenyeho | IEC 60068-2-27 (15G) |
| Khanyetso ea ho thothomela | IEC 60068-2-6 (4 g) |
| Likhase tsa indasteri | EN 61000-6-4: 2019 |
| Tšireletso ea indasteri | EN 61000-6-2: 2019 |
| Boemo ba ho kenya | E otlolohileng le e tshekaletseng |
| Setifikeiti sa lihlahisoa | CE, FCC, UL, cUL |
Litlhaloso Kakaretso
| Ho felloa ke matla | Max. 40 mA @ 5 VDC |
| Ho behwa ka thoko | I/O ho logic: Ho itšehla thajana ha Photocoupler |
| Matla a tšimo | Phepelo voltage: 24 VDC lebitso la Moqtagmefuta e fapaneng: 18 - 30 VDC
Phallo ea matla: 10 mA @ 24 VDC |
| Wiring | I/O cable max. 0.823 mm² (AWG 18) |
| Boima ba 'mele | 63 g |
| Boholo ba module | 12 mm x 109 mm x 70 mm |
Litekanyo
Litekanyo tsa module (mm)
Litlhaloso tsa ho Kena
| Lintho tse kenang ka mojule | Lintlha tse 8 tsa mofuta oa sink |
| Khokahano ea Sensor | 2-terata proximity sensor |
| Lipontšo | 8 boemo ba ho kenya botala |
| Boemong ba naha voltage | 24 VDC lebitso
15 – 30 VDC @ 60 ℃ |
| Boemong ba hajoale | Hoo e ka bang 6 mA @ 18 - 30 VDC |
| Off-state voltage | 9.8 VDC @ 25 ℃ |
| Ho lieha ha lets'oao la ho kenya | TIMA ho ON: Max. 0.3 ms
ON to OFF: Max. 0.3 ms |
| Sesefa se kenyang | E ka feto-fetoha, ho fihla ho 10 ms |
| Mofuta o tloaelehileng | Lintlha tse 8 / 1 COM (sinki) |
Setšoantšo sa Wiring
| Tšoaea no. | Tlhaloso ea lets'oao |
| 0 | Mocha oa ho kenya 0 |
| 1 | Matla a tšimo 24 V |
| 2 | Mocha oa ho kenya 1 |
| 3 | Matla a tšimo 24 V |
| 4 | Mocha oa ho kenya 2 |
| 5 | Matla a tšimo 24 V |
| 6 | Mocha oa ho kenya 3 |
| 7 | Matla a tšimo 24 V |
| 8 | Mocha oa ho kenya 4 |
| 9 | Matla a tšimo 24 V |
| 10 | Mocha oa ho kenya 5 |
| 11 | Matla a tšimo 24 V |
| 12 | Mocha oa ho kenya 6 |
| 13 | Matla a tšimo 24 V |
| 14 | Mocha oa ho kenya 7 |
| 15 | Matla a tšimo 24 V |
| 16 | E tloaelehileng (matla a tšimo 0 V) |
| 17 | Matla a tšimo 24 V |
Letšoao la LED
| Nomoro ea LED. | LED mosebetsi/tlhaloso | Mmala oa LED |
| 0 | INPUT kanale 0 | Botala |
| 1 | INPUT kanale 1 | Botala |
| 2 | INPUT kanale 2 | Botala |
| 3 | INPUT kanale 3 | Botala |
| 4 | INPUT kanale 4 | Botala |
| 5 | INPUT kanale 5 | Botala |
| 6 | INPUT kanale 6 | Botala |
| 7 | INPUT kanale 7 | Botala |
Boemo ba Channel ea LED
| Boemo | LED | Pontsho |
| Ha ho pontšo | E tima | Ha ho lets'oao la ho kenya |
| Ka pontsho | Botala | Lets'oao la ho kenya le fumanoe |
Ho etsa 'mapa oa data ka har'a tafole ea litšoantšo
Kenya lintlha tsa mojule
| D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
Kenya boleng ba setšoantšo
| Empa che. | hanyane 7 | hanyane 6 | hanyane 5 | hanyane 4 | hanyane 3 | hanyane 2 | hanyane 1 | hanyane 0 |
| Byte 0 | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
Lintlha tsa parameter
Bolelele bo nepahetseng ba parametha: li-byte tse 2
| Empa che. | hanyane 7 | hanyane 6 | hanyane 5 | hanyane 4 | hanyane 3 | hanyane 2 | hanyane 1 | hanyane 0 |
| Byte 0 | Boleng ba sefe seo o se kenyang: 0 – 10 (yuniti: ms) | |||||||
| Byte 1 | Reserved | |||||||
Ho hlophisoa ha Hardware
TLHOKOMELO
- Bala khaolo ena kamehla pele o kenya module!
- Sebaka se chesang! Bokaholimo ba ntlo bo ka chesa nakong ea ts'ebetso. Haeba sesebelisoa se sebelisoa mochesong o phahameng oa tikoloho, kamehla tlohela sesebelisoa hore se phomole pele u se tšoara.
- Ho sebetsa ka lisebelisoa tse matlafalitsoeng ho ka senya thepa! Kamehla tima motlakase pele o sebetsa sesebelisoa.
Litlhoko tsa Sebaka
Litšoantšo tse latelang li bontša litlhoko tsa sebaka ha u kenya li-module tsa G-Series. Sekheo se theha sebaka sa moea le ho thibela tšitiso e etsoang ke electromagnetic ho susumetsa ts'ebetso. Boemo ba ho instola bo nepahetse bo otlolohile ebile bo tšekaletse. Litšoantšo li na le litšoantšo 'me li ka 'na tsa se ke tsa lekana.
TLHOKOMELO
Ho se latele ditlhoko tsa sebaka ho ka baka ho senya sehlahisoa.
Mount Module ho DIN Rail
Likhaolo tse latelang li hlalosa mokhoa oa ho kenya mojule seporong sa DIN.
TLHOKOMELO
Mojule o tlameha ho ts'oaroa ho seporo sa DIN ka lithapo tsa ho notlela.
Thaba ea GL-9XXX kapa GT-XXXX Module
Litaelo tse latelang li sebetsa mefuteng ena ea li-module:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
Li-module tsa GN-9XXX li na le lisebelisoa tse tharo tsa ho notlela, e 'ngoe e le ka tlase le tse peli ka lehlakoreng. Bakeng sa litaelo tsa ho holisa, sheba Mount GN-9XXX Module.
Thaba ea GN-9XXX Module
Ho kenya kapa ho theola adaptara ea netweke kapa mojule oa IO o ka sebelisoang ka lebitso la sehlahisoa GN-9XXX, bakeng sa mohlala.ample, GN-9251 kapa GN-9371, bona litaelo tse latelang:
Mount Removable Terminal Block
Ho hloma kapa ho theola "terminal block" (RTB), sheba litaelo tse ka tlase.
Hokela Lithapo ho Thibelo ea Removable Terminal Block
Ho hokela/ho hakolla lithapo ho/ho tloha borokhong bo ka ntshuwang (RTB), sheba ditaelo tse ka tlase.
TLHOKOMELO
Kamehla sebelisa tlhahiso e khothaletsoang voltage le makhetlo a mangata ho thibela tšenyo ea lisebelisoa le ho netefatsa ts'ebetso e nepahetseng.
Matla a Tšimo le Lithako tsa Lintlha
Puisano pakeng tsa adapter ea marang-rang ea G-Series le module ea ho atolosa, hammoho le tsamaiso / matla a tšimo ea li-module tsa libese, e etsoa ka bese ea ka hare. E na le 2 Field Power Pins le 6 Data Pins.
TLHOKOMELO
Se ke oa ama lintlha le lithakhisa tsa matla a tšimo! Ho ama ho ka fella ka ho silafatsoa le ho senyeha ka lerata la ESD.
| Tšoaea no. | Lebitso | Tlhaloso |
| P1 | Sistimi ea VCC | Phepelo ea sistimi voltage (5 VDC) |
| P2 | Sistimi ea GND | Sebaka sa tsamaiso |
| P3 | Sephetho sa token | Boema-kepe ba token ea module ea processor |
| P4 | Tlhahiso ea serial | Transmitter port port ea module ea processor |
| P5 | Tlhahiso ea serial | Boema-kepe ba ho amohela mojule oa processor |
| P6 | Reserved | E boloketsoe token ea bypass |
| P7 | Tšimong GND | Sebaka sa tšimo |
| P8 | Sebaka sa VCC | Phepelo ea masimong voltage (24 VDC) |
FAQs
- P: Lipontšo tsa LED mojuleng li bolela eng?
A: Matšoao a LED a bontša boemo ba mocha ka mong, a bontšang hore na letšoao la ho kenya le sebetsa kapa che. - P: A na nka sebelisa mojule ona ka li-sensor tse ling ntle le li-proximity sensors?
A: Ho khothaletsoa ho sebelisa li-sensor tsa proximity ho latela litlhaloso tse fanoeng bakeng sa ts'ebetso e nepahetseng le tšebelisano.
Litokomane / Lisebelisoa
 |
Beijer Electronics GT-1278 Digital Input Mojule [pdf] Bukana ea Mosebelisi GT-1278 Digital Input Module, GT-1278, Digital Input Module, Input Mojule |