Beijer Electronics GT-1278 Digital Input Module
Ƙayyadaddun bayanai
- Samfura: GT-1278
- Nau'in: Module Input na Dijital
- Tashoshi: 8
- Nau'in Sensor: kusanci
- Nau'in Input: nutse
- Tushen wutan lantarki: 24 VDC
- Yanzu: 6 mA
- Nau'in Tasha: 18 pt m tasha
Umarnin Amfani da samfur
- Shigarwa da Saita
Kafin farawa, tabbatar da cewa an kashe wutar lantarki. Haɗa ƙirar zuwa wutar lantarki ta amfani da tasha mai cirewa mai maki 18 da aka tanadar. Bi zanen waya a cikin littafin mai amfani don shigarwa daidai. - Kanfigareshan
Da zarar an shigar, saita tsarin bisa ga bukatun ku. Koma zuwa sashin Bayanan Sigogi a cikin jagorar don jagora kan saita sigogi don ingantaccen aiki. - Amfani
Don amfani da GT-1278 Digital Input Module, haɗa firikwensin kusancinku zuwa tashoshi da aka keɓance. Tabbatar cewa siginonin shigarwa sun dace da ƙayyadaddun bayanai da aka ambata a cikin littafin. Alamar LED za ta nuna matsayi na tashar don sauƙaƙe kulawa. - Kulawa
Duba akai-akai don kowane sako-sako da alaƙa ko alamun lalacewa. Kiyaye samfurin a tsabta kuma ba shi da ƙura don tabbatar da ingantaccen aiki.
Game da Wannan Jagoran
Wannan littafin ya ƙunshi bayani kan software da kayan masarufi na Beijer Electronics GT-1278 Digital Input Module. Yana ba da ƙayyadaddun bayanai masu zurfi, da jagora akan shigarwa, saiti, da amfani da samfurin.
Alamomin da Aka Yi Amfani da su a cikin Wannan Jagoran
Wannan ɗaba'ar ya haɗa da Gargaɗi, Tsanaki, Bayanan kula, da gumaka masu mahimmanci inda ya dace, don nuna masu alaƙa da aminci, ko wasu mahimman bayanai. Ya kamata a fassara alamomin da suka dace kamar haka:
GARGADI
Alamar faɗakarwa tana nuna yanayi mai yuwuwar haɗari wanda, idan ba a kiyaye shi ba, zai iya haifar da mutuwa ko mummunan rauni da babban lahani ga samfurin.
HANKALI
Alamar taka tsantsan tana nuna yanayi mai yuwuwar haɗari wanda, idan ba a kiyaye shi ba, zai iya haifar da ƙaramin rauni ko matsakaici, da matsakaicin lalacewa ga samfurin.
NOTE
Alamar bayanin kula tana faɗakar da mai karatu zuwa ga gaskiya da yanayi masu dacewa.
MUHIMMANCI
Muhimman alamar yana nuna mahimman bayanai.
Tsaro
Kafin amfani da wannan samfurin, da fatan za a karanta wannan jagorar da sauran littattafan da suka dace a hankali. Biya cikakken hankali ga umarnin aminci!
Babu wani yanayi da Beijer Electronics zai kasance da alhakin ko alhakin lalacewa sakamakon amfani da wannan samfurin?
Hotunan, examples, da zane-zane a cikin wannan jagorar an haɗa su don dalilai na misali. Saboda yawancin masu canji da buƙatun da ke da alaƙa da kowane takamaiman shigarwa, Beijer Electronics ba zai iya ɗaukar nauyi ko alhaki don ainihin amfani dangane da tsohonamples da zane-zane.
Takaddun shaida na samfur
Samfurin yana da takaddun takaddun samfur masu zuwa.
Janar Bukatun Tsaro
GARGADI
- Kada a haɗa samfuran da wayoyi tare da wutar da aka haɗa da tsarin. Yin haka yana haifar da “bakin filashi”, wanda zai iya haifar da al’amura masu haɗari da ba zato ba tsammani (ƙonawa, wuta, abubuwa masu tashi, matsa lamba, fashewar sauti, zafi).
- Kar a taɓa tubalan tasha ko na'urorin IO lokacin da tsarin ke gudana. Yin hakan na iya haifar da girgiza wutar lantarki, gajeriyar kewayawa, ko rashin aiki na na'urar.
- Kada ka bari abubuwan ƙarfe na waje su taɓa samfurin lokacin da tsarin ke gudana. Yin hakan na iya haifar da girgiza wutar lantarki, gajeriyar kewayawa, ko rashin aiki na na'urar.
- Kada ka sanya samfurin kusa da abu mai ƙonewa. Yin hakan na iya haifar da gobara.
- Duk aikin wayoyi ya kamata injiniyan lantarki ya yi.
- Lokacin sarrafa kayan aikin, tabbatar da cewa duk mutane, wurin aiki da marufi suna da tushe sosai. Guji taɓa abubuwan da ke gudana, samfuran sun ƙunshi abubuwan lantarki waɗanda za a iya lalata su ta hanyar fitarwar lantarki.
HANKALI
- Kada a taɓa amfani da samfurin a cikin yanayin zafi sama da 60 ℃. Guji sanya samfurin a cikin hasken rana kai tsaye.
- Kada a taɓa amfani da samfurin a cikin mahallin sama da 90% zafi.
- Yi amfani da samfur koyaushe a cikin mahalli tare da gurɓataccen digiri 1 ko 2.
- Yi amfani da madaidaicin igiyoyi don yin wayoyi.
Game da Tsarin G-jerin
Tsarin Ya ƙareview
- Module Adaftar hanyar sadarwa - Tsarin adaftar cibiyar sadarwa yana samar da hanyar haɗin kai tsakanin bas ɗin filin da na'urorin filin tare da kayan haɓakawa. Ana iya kafa haɗin kai zuwa tsarin bas na filin daban-daban ta kowane nau'ikan adaftar hanyar sadarwa masu dacewa, misali, don MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/ Serial, da dai sauransu.
- Module Fadada - nau'ikan nau'ikan haɓakawa: Digital IO, Analog IO, da kayayyaki na musamman.
- Saƙo - Tsarin yana amfani da saƙo iri biyu: Saƙon sabis da saƙon IO.
IO Tsarin Taswirar Bayanai
- Tsarin fadada yana da nau'ikan bayanai guda uku: bayanan IO, ma'aunin daidaitawa, da rajistar ƙwaƙwalwar ajiya. Ana yin musayar bayanai tsakanin adaftar cibiyar sadarwa da tsarin haɓakawa ta hanyar aiwatar da bayanan hoto na IO ta hanyar yarjejeniya ta ciki.
Gudun bayanai tsakanin adaftan cibiyar sadarwa (ramummuka 63) da kuma abubuwan haɓakawa- Bayanan bayanan shigarwa da fitarwa sun dogara ne akan matsayin ramin da nau'in bayanai na ramin fadadawa. Yin odar shigarwa da fitarwa bayanan hoto yana dogara ne akan matsayi na faɗaɗawa. Lissafi don wannan tsari an haɗa su a cikin litattafan adaftar cibiyar sadarwa da tsarin IO masu shirye-shirye.
- Ingantattun bayanan siga ya dogara da samfuran da ake amfani da su. Domin misaliample, na'urorin analog suna da saitunan ko dai 0-20 mA ko 4-20 mA, kuma na'urorin zafin jiki suna da saituna kamar PT100, PT200, da PT500. Takaddun bayanai na kowane nau'i yana bayyana bayanan siga.
Ƙayyadaddun bayanai
Ƙayyadaddun Muhalli
| Yanayin aiki | -20°C – 60°C |
| UL zafin jiki | -20°C – 60°C |
| Yanayin ajiya | -40°C – 85°C |
| Dangi zafi | 5%-90% ba condensing |
| Yin hawa | DIN dogo |
| Shock aiki | IEC 60068-2-27 (15G) |
| Juriya na rawar jiki | IEC 60068-2-6 (4 g) |
| Fitar masana'antu | EN 61000-6-4: 2019 |
| Kariyar masana'antu | EN 61000-6-2: 2019 |
| Matsayin shigarwa | A tsaye da a kwance |
| Takaddun shaida na samfur | CE, FCC, UL |
Gabaɗaya Bayani
| Rashin wutar lantarki | Max. 40mA @ 5 VDC |
| Kaɗaici | I/O zuwa dabaru: Keɓewar Photocoupler |
| Ƙarfin filin | Ƙarar voltage: 24 VDC mai lamba Voltage kewayon: 18-30 VDC
Rashin wutar lantarki: 10mA @ 24 VDC |
| Waya | I/O na USB max. 0.823 mm² (AWG 18) |
| Nauyi | 63g ku |
| Girman module | 12 x 109 mm x 70 mm |
Girma
Girman Module (mm)
Ƙididdigar shigarwa
| Abubuwan shigarwa kowane module | Nau'in nutse maki 8 |
| Haɗin Sensor | 2-waya kusanci firikwensin |
| Manuniya | Matsayin shigarwar kore 8 |
| On-jihar voltage | 24 VDC mara kyau
15 - 30 VDC @ 60 ℃ |
| Yanayin halin yanzu | Kimanin 6 mA @ 18 - 30 VDC |
| Off-jihar voltage | 9.8 VDC @ 25 ℃ |
| Jinkirin siginar shigarwa | KASHE zuwa: Max. 0.3 ms
KUNNA zuwa KASHE: Max. 0.3 ms |
| Tace ta shiga | Daidaitacce, har zuwa 10 ms |
| Nau'in gama gari | maki 8 / 1 COM (nutse) |
Tsarin Waya
| Fil babu. | Bayanin sigina |
| 0 | Tashar shigarwa 0 |
| 1 | Ƙarfin filin 24 V |
| 2 | Tashar shigarwa 1 |
| 3 | Ƙarfin filin 24 V |
| 4 | Tashar shigarwa 2 |
| 5 | Ƙarfin filin 24 V |
| 6 | Tashar shigarwa 3 |
| 7 | Ƙarfin filin 24 V |
| 8 | Tashar shigarwa 4 |
| 9 | Ƙarfin filin 24 V |
| 10 | Tashar shigarwa 5 |
| 11 | Ƙarfin filin 24 V |
| 12 | Tashar shigarwa 6 |
| 13 | Ƙarfin filin 24 V |
| 14 | Tashar shigarwa 7 |
| 15 | Ƙarfin filin 24 V |
| 16 | Na kowa (ikon filin 0V) |
| 17 | Ƙarfin filin 24 V |
Alamar LED
| LED no. | Ayyukan LED / bayanin | LED launi |
| 0 | INPUT tashar 0 | Kore |
| 1 | INPUT tashar 1 | Kore |
| 2 | INPUT tashar 2 | Kore |
| 3 | INPUT tashar 3 | Kore |
| 4 | INPUT tashar 4 | Kore |
| 5 | INPUT tashar 5 | Kore |
| 6 | INPUT tashar 6 | Kore |
| 7 | INPUT tashar 7 | Kore |
Matsayin Tashoshin LED
| Matsayi | LED | Nuni |
| Babu sigina | Kashe | Babu siginar shigarwa |
| Kan sigina | Kore | An gano siginar shigarwa |
Taswirar Bayanai A cikin Teburin Hoto
Bayanan shigarwar module
| D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
Shigar da ƙimar hoton
| Amma a'a. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Baiti 0 | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
Bayanan Sigar
Tsawon siga mai inganci: 2 bytes
| Amma a'a. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Baiti 0 | Ƙimar tace shigarwa: 0 - 10 (raka'a: ms) | |||||||
| Baiti 1 | Ajiye | |||||||
Saitin Hardware
HANKALI
- Koyaushe karanta wannan babin kafin shigar da tsarin!
- Zafi mai zafi! Fuskar gidan na iya zama zafi yayin aiki. Idan ana amfani da na'urar a cikin yanayin yanayin zafi, koyaushe bari na'urar ta yi sanyi kafin ta taɓa ta.
- Yin aiki akan na'urori masu ƙarfi na iya lalata kayan aiki! Koyaushe kashe wutar lantarki kafin aiki akan na'urar.
Bukatun sararin samaniya
Zane-zane masu zuwa suna nuna buƙatun sarari lokacin shigar da samfuran G-jerin. Tazarar tana haifar da sarari don samun iska kuma yana hana tsangwama na lantarki da aka gudanar daga yin tasiri. Matsayin shigarwa yana aiki a tsaye da a kwance. Hotunan misalai ne kuma maiyuwa ba su kai daidai ba.
HANKALI
Rashin bin buƙatun sarari na iya haifar da lalata samfur.
Dutsen Module zuwa DIN Rail
Babi masu zuwa suna bayyana yadda ake hawan tsarin zuwa dogo na DIN.
HANKALI
Dole ne a daidaita tsarin zuwa layin dogo na DIN tare da maƙallan kullewa.
Dutsen GL-9XXX ko GT-XXXX Module
Umurnai masu zuwa sun shafi waɗannan nau'ikan samfura:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
Modulolin GN-9XXX suna da levers na kulle guda uku, ɗaya a ƙasa da biyu a gefe. Don umarnin hawa, koma zuwa Module Dutsen GN-9XXX.
Module Dutsen GN-9XXX
Don hawa ko saukar da adaftar cibiyar sadarwa ko tsarin IO mai tsari tare da sunan samfurin GN-9XXX, don ex.ample, GN-9251 ko GN-9371, duba umarni masu zuwa:
Tushen Tasha Mai Cirewa
Don hawa ko saukar da toshe mai cirewa (RTB), duba umarnin da ke ƙasa.
Haɗa igiyoyi zuwa Toshe Tasha Mai Cirewa
Don haɗa/cire haɗin igiyoyi zuwa/daga cikin toshe mai cirewa (RTB), duba umarnin da ke ƙasa.
GARGADI
Koyaushe amfani da shawarar samarwa voltage da mita don hana lalacewar kayan aiki da kuma tabbatar da kyakkyawan aiki.
Wurin Wuta da Fil ɗin Bayanai
Ana gudanar da sadarwa tsakanin adaftar cibiyar sadarwa ta G-jerin da tsarin fadada, da kuma tsarin / filin samar da wutar lantarki na motocin bas, ta hanyar bas na ciki. Ya ƙunshi Filayen Wutar Wuta 2 da Fin Data 6.
GARGADI
Kar a taɓa bayanan da filayen ikon filin! Taɓawa na iya haifar da lalacewa da lalacewa ta hanyar hayaniyar ESD.
| Fil babu. | Suna | Bayani |
| P1 | Tsarin VCC | Samar da tsarin voltage (5VDC) |
| P2 | Tsarin GND | Tsarin ƙasa |
| P3 | Fitowar alama | Token fitarwa tashar jiragen ruwa na processor module |
| P4 | Serial fitarwa | Mai watsa fitarwa tashar jiragen ruwa na processor module |
| P5 | Shigar da serial | Mai shigar da tashar tashar mai karɓar mai sarrafawa |
| P6 | Ajiye | An tanada don alamar wucewa |
| P7 | Filin GND | Filin filin |
| P8 | Filin VCC | Samar da filin voltage (24VDC) |
FAQs
- Tambaya: Menene alamun LED akan ƙirar ke nunawa?
A: Alamomin LED suna nuna matsayin kowane tashoshi, yana nuna ko siginar shigarwa tana aiki ko a'a. - Tambaya: Zan iya amfani da wannan tsarin tare da na'urori masu auna firikwensin ban da kusancin firikwensin?
A: Ana ba da shawarar yin amfani da na'urori masu auna kusanci kamar yadda ƙayyadaddun ƙayyadaddun da aka bayar don ingantaccen aiki da dacewa.
Takardu / Albarkatu
 |
Beijer Electronics GT-1278 Digital Input Module [pdf] Manual mai amfani GT-1278 Module Input na Dijital, GT-1278, Module ɗin shigarwar dijital, Module ɗin shigarwa |