Tataiso ea ho Qala ka Potlako
960 TAOLI TLHALOSO
Pale ea nalane ea Analog Mohato oa Sequencer bakeng sa Eurorack
Litaolo
- MOLELEKI - Khetha sebaka se sephara sa oscillator se nang le knob ea Frequency Range, 'me u bine hantle ka knob ea Frequency Vernier. Kopanya kapa u tlose oscillator ka letsoho ka likonopo tsa OSC ON le OFF, kapa hokela molumo oa kantle.tage trigger (V-trig) lipontšo tsa ho laola boemo ba ho tima / ho tima.
- TAOLO KEKETSO - Amohela voltage ho tloha mojuleng o mong ho laola maqhubu a oscillator.
- SEBONOLO OSCILLATOR - Romella lets'oao la oscillator ka thapo ea 3.5 mm TS.
- IN – Kenya tshebetsong leqtage ka molumo oa kantletage trigger (V-trig). Hlokomela hore haeba joalo katage IN e patiloe ho e 'ngoe stage TSOA, e tla etsa hore 960 e boele e be stage 1, ho feta ktage ka mor'a jeke ea OUT.
- TSOA – Romela voltage trigger (V-trig) pontšo ho mojulung o mong.
- HLOKOMELA – Ka bowena kenya tshebetsong e letage. Ha ho ka ba le phoso ea tatellano, tobetsa konopo efe kapa efe ea SET ho qala ho ba joalo katage le ho khutlisetsa ts'ebetso e tloaelehileng.
- STAGE MOKHOA – Boemong bo Tlwaelehileng, stage tsamaisa potoloho ea eona 'me e fetela pele ho lets e latelangtage. Ho khetha Skip setting ho tla feta stage, le ho khetha Emisa ho tla emisa tatellano. A 9th stage teng ho ntšetsa pele tatelano (Skip) kapa Emisa tatelano ho stage 9 e etsang stage 9 tlhahiso e sebetsang. Neng kapa neng ha stage 9 e fetoha e sebetsang, oscillator e tima ka bo eona.
- TLHOKOMELOTAGE MOLAOLI - Fetola molumotage bakeng sa se seng le se sengtage. LED e amanang le eona e tla khantša ho bontša stage.
- SEHLOOHO KAROLO – Romela voltage ho tloha ka 8stagho ea ho li-module tse ling. Liphetho li ka lekanngoa ka likonopo tse amanang le 1, 2 kapa 4.
- 3RD MOLAO NAKO - Kaha basebelisi ba bangata ba tla tsamaisa 960 joalo ka 8-stage kapa 16-stage sequencer (ka 962 module), mola oa 3rd o ka sebelisoa ho laola nako ea s.tage. Tsamaisa swichi sebakeng sa ON 'me u lokise se seng le se sengtage's 3rd knob ho lelefatsa kapa ho khutsufatsa nako.
- PHATHISA Laola ho fetoha ka mohloli o kantle kapa ka letsoho ka konopo.
V 1.0
24-Stage Sebetsa
Sepheo se seholo sa 962 sequential switch module ke ho khetha ka tsela e fapaneng pakeng tsa mela e 3 ea tlhahiso ea 960 ho theha 24-s.tage tatellano. Kopanya koloko ea ho qhomisa OUT ho tloha ho stage 1 ho kenyelletso ea SHIFT ea 962. Kopanya mela e 3 ea tlhahiso A, B, C ho tloha ho 960 ho ea ho 962's 3 SIG inputs. Hona joale tlhahiso ea 962 e tla ba 24-stage sequencer output, kapa u tlohele thapo ea patch ea C bakeng sa mehato e 16.
Tsamaiso ea tokiso
- Matlafatsa module ea 960 ebe u tobetsa konopo ea OSC ON. Lumella yuniti hore e futhumale ka metsotso e seng mekae.
- Lokisetsa litlhophiso tse latelang tsa taolo:
a. Beha konopo ea 3RD ROW CONTROL OF TIMING.
b. Behantsha LETSATSI la rotary switch ho 6 sekaleng.
c. Etsa bonnete ba hore ha ho jack e hokahaneng le oscillator CONTROL INPUT. - Beha FREQUENCY VERNIER bakeng sa 100 Hz hantle ho OSCILLATOR OUTPUT e lekantsoeng ka metara e nepahetseng ea frequency ebe o lokisa DUTY CYCLE ADJ bakeng sa potoloho ea mosebetsi oa 90%.
- Lokisa maqhubu a phahameng a 960 oscillator ka tsela e latelang:
a. Etsa kopo hantle +2.0 VDC ho jeko ea CONTROL INPUT (mojule ea 921A e ka sebelisoa ho fana ka +2.0 VDC kapa ea sebelisa setaele se tlase se ts'oanang se tlase.tage mohloli).
b. Fokotsa seteraele sa 960 SCALE ADJ ho beha 400 Hz, ebe u tlosa kenyelletso ea +2.00 V ebe u khutlisetsa 960 FREQ VERNIER ho 100 Hz.
c. Pheta potoloho ena ho fihlela 100 Hz le 400 Hz li nepahetse ho ± 1 Hz ha +2.00 VDC e kentsoe kahare le kantle ho jack ea CONTROL. - Lokisa maqhubu a tlase a 960 oscillator ka tsela e latelang:
a. Etsa kopo hantle -2.0 VDC ho jeko ea CONTROL INPUT (Mojule oa 921A o ka sebelisoa ho fana ka -2.00 VDC kapa o sebelisa mochini o tsitsitseng o fokolang o tlase o ts'oanang.tage mohloli).
b. Fokotsa sekontiri sa 960 LOW END ADJ ho beha 25 Hz, ebe u tlosa kenyelletso ea -2.00 V ebe u khutlisetsa 960 FREQ VERNIER ho 100 Hz.
c. Pheta potoloho ena ho fihlela 100 Hz le 25 Hz li nepahetse ho ± 1 Hz ha -2.00 VDC e kentsoe le ho tsoa ka jack ea CONTROL.
- Behantsha maqhubu a phahameng a 960 oscillator ka tsela e latelang:
a. Etsa bonnete ba hore ha ho jack e hokahantsoeng le INOLTING EA TAOLO.
b. Beha FREQUENCY VERNIER ka ho lekana ka ho lekana (10 sekaleng).
c. Fetola trimmer ea LITLHAKU TSE KHOLO ho beha 500 Hz hantle ho OSCILLATOR OUTPUT.
d. Kenya kopo hantle +2.0 VDC ho jack ea CONTROL (sena se ka emisa oscillator ho sebetsa).
e. Fetola sekontiri sa FREQ STOP ADJ ho fihlela oscillator e qala ho matha ebe o beha frequency e holimo ho 550 Hz.
f. Tlosa +2.0 VDC CONTROL INPUT 'me u hlahlobe maqhubu a oscillator ke 500 Hz. Fetola sekontiri se TSOANG HAHOLO ha ho hlokahala.
g. Etsa kopo hantle +2.0 VDC ho jack ea CONTROL, haeba oscillator e lula e ntse e sebetsa, ho faola ho phethetsoe. Haeba ho se joalo, pheta kamoo ho hlokahalang.
Khokelo ea Matla
Kopanya pheletso P1 ho soketeng ea module
Kopanya pheletso ea P2 phepelong ea motlakase
Mojule o tla le thapo ea motlakase e hlokahalang bakeng sa ho hokela ho sistimi e tloaelehileng ea phepelo ea motlakase ea Eurorack. Latela mehato ena ho hokela matla mojulung ona. Ho bonolo haholoanyane ho etsa lihokelo tsena pele module e kentsoe ka har'a mokotla oa thepa.
- Tima motlakase kapa rack case motlakase o tima ebe o hakolla thapo ea motlakase.
- Kenya sehokedi sa lipini tse 16 ka thapo ea motlakase ka har'a soketeng ea phepelo ea motlakase kapa mokotleng oa rack. Sehokedi se na le tabo e tla tsamaellana le lekhalo le ka soketeng, ka hona e ke ke ea kengoa ka nepo. Haeba phepelo ea motlakase e se na socket e nang le linotlolo, etsa bonnete ba hore o tsamaisa pin 1 (-12 V) ka mola o mofubelu thapo.
- Kenya sehokelo sa li-pin tse 10 ka soketeng e ka morao ea mojule. Sehokelo se na le tab e tla ikamahanya le sokete bakeng sa mokhoa o nepahetseng.
- Ka mor'a hore lipheletsong tse peli tsa thapo ea motlakase li hokeletsoe ka mokhoa o sireletsehileng, u ka kenya mojule ka khese ebe o bulela phepelo ea motlakase.
Ho kenya
Lisebelisoa tse hlokahalang li kenyelelitsoe le module ea ho kenya mochini oa Eurorack. Kopanya thapo ea motlakase pele o hloa.
Ho ipapisitsoe le mokotla oa mokotla, ho kanna ha ba le likoti tse sa fetoheng tse arohaneng ka 2 HP ka bolelele ba nyeoe, kapa pina e lumellang lipoleiti ka bomong hore li thellele nako eohle ea nyeoe. Lipoleiti tse tsamaeang ka bolokolohi li lumella boemo ba mojule hantle, empa poleiti ka 'ngoe e lokela ho beoa kamanong e lekantsoeng le masoba a ntseng a hola mojuleng oa hau pele u hokela lisurufu.
Tšoara mojule khahlanong le liporo tsa Eurorack e le hore masoba a mang le a mang a hokahanngoang le seporo se kopantsoeng kapa poleiti e koahetsoeng. Kenya likarolo tsa tsela ea ho qala, e tla lumella liphetoho tse nyane maemong moo o li lumellang kaofela. Ka mor'a hore boemo ba ho qetela bo thehoe, tiisa lisepa.
Litlhaloso
Lintho tse kenang
| Oscillator bulela / tima | |
| Mofuta | 2 x 3.5 mm TS jacks, AC e kopane |
| Tšitiso | > 3 kΩ, e sa leka-lekanang |
| Boholo ba ho kenya | + 5 V |
| Bonyane ba phetoho | +3.5 V thunya |
| Laola ho kenya | |
| Mofuta | 3.5 mm TS jack, 1 V / oct |
| Tšitiso | 100 kΩ, e sa leka-lekanang |
| Boholo ba ho kenya | ± 2 V, vernier e behiloe ho 5 |
| Ho kenya Shift | |
| Mofuta | 3.5 mm TS jack, DC e kopane |
| Tšitiso | 7 kΩ, e sa leka-lekanang |
| Boholo ba ho kenya | ± 5 V |
| Bonyane ba phetoho | + 1.5 V |
| Stagli-triggers | |
| Mofuta | 8 x 3.5 mm TS jacks, AC e kopane |
| Tšitiso | > 3 kΩ, e sa leka-lekanang |
| Boholo ba ho kenya | + 5 V |
| Bonyane ba phetoho | +3.5 V thunya |
Litholoana
| Litholoana tsa mela | |
| Mofuta | 6 x 3.5 mm TS jacks, DC li kopane |
| Tšitiso | 500 Ω, e sa leka-lekanang |
| Boemo bo phahameng ba tlhahiso | +8 V (moeli X4) |
| Stage trigger outputs | |
| Mofuta | 8 x 3.5 mm TS jacks, DC li kopane |
| Tšitiso | 250 Ω, e sa leka-lekanang |
| Boemo bo phahameng ba tlhahiso | +5 V, e sebetsa ka matla |
| Tlhahiso ea Oscillator | |
| Mofuta | 3.5 mm TS jack, DC e kopane |
| Tšitiso | 4 kΩ, e sa leka-lekanang |
| Boemo bo phahameng ba tlhahiso | +4 dBu |
| Potoloho ea mosebetsi | 90% |
Litaolo
| Sebaka sa maqhubu | 1 (0.04 ho isa ho 0.5 Hz), 2 (2.75 ho isa ho 30 Hz) 3 (0.17 ho isa ho 2 Hz), 4 (11 ho isa ho 130 Hz) 5 (0.7 ho isa ho 8 Hz), 6 (44 ho isa ho 500 Hz) |
| Maqhubu vernier | Lokisa sebaka sa oscillator, 3 octave range |
| Oscillator bulela / tima | Ka letsoho qala kapa emisa oscillator |
| Moqtaglikotola | -∞ ho fihla ho max voltage behiloe ke sesebelisoa sa marang-rang |
| Phetoho ea mokhoa | Tlola stage, bapala stage, emisa sequencer |
| Beha | Ka bouena khetha stage |
| Liphetoho tse fapaneng | X1 (+ 2 V), X2 (+4 V), X4 (+8 V), max. tlhahiso |
| Nako ea ho bulela / ho tima | E lumella likhoto tsa mola oa 3 ho laola stage nako |
| Shift konopo | Ka bowena tlolele ho lets e latelangtage |
Matla
| Phepelo ea motlakase | Eurorack |
| Tlhōlo ea hona joale | 100 MA (+12 V), 50 mA (-12 V) |
Ea nama
| Litekanyo | 284 x 129 x 47 mm (11.2 x 5.1 x 1.9″) |
| Lisebelisoa tsa rack | 56 HP |
| Boima ba 'mele | 0.64 lik'hilograma (1.41 lbs) |
TLHOKOMELO MOLAO
Music Tribe ha e amohele molato bakeng sa tahlehelo efe kapa efe e ka hlahelwang ke motho ofe kapa ofe ya itshetlehileng ka botlalo kapa karolo e itseng hodima tlhaloso, senepe, kapa polelo efe kapa efe e teng mona. Litlhaloso tsa tekheniki, ponahalo le lintlha tse ling li ka fetoha ntle le tsebiso. Matshwao ohle a kgwebo ke thepa ya beng ba ona. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone le Coolaudio ke matšoao a khoebo kapa matšoao a ngolisitsoeng a Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2020 Litokelo tsohle li bolokiloe .
TIISETSO MOEKETSI
Bakeng sa lipehelo le lipehelo tse sebetsang tsa tiisetso le lintlha tse ling mabapi le Tiisetso e Lekanyelitsoeng ea Music Tribe, ka kopo bona lintlha tse felletseng inthaneteng ho @motswedingfm.
Rea U Utloa
Litokomane / Lisebelisoa
 |
behrimger 960 Sequential Controller [pdf] Buka ea Taelo Molaoli oa tatellano ea 960 |
