BEA BR3-X Programmable 3 Relay Logic Module

PELE HO QALA

BALA PELE U QALA HO INSTALLATION & SET-UP

• Koala matla ohle ho ea hloohong pele u leka mekhoa efe kapa efe ea wiring.
• Boloka tikoloho e hloekile ebile e bolokehile ha u sebetsa libakeng tsa sechaba.
• Kamehla hlokomela sephethephethe sa batho ba tsamaeang ka maoto ho potoloha lemati.
• Kamehla emisa sephethephethe sa batho ba tsamaeang ka maoto monyako ha u etsa liteko tse ka hlahisang maikutlo a sa lebelloang ke monyako.
• ESD (electrostatic discharge): Liboto tsa potoloho li kotsing ea ho senyeha ka ho tsoa ha motlakase. Pele o sebetsana le boto efe kapa efe, etsa bonnete ba hore o hlakola tefiso ea 'mele oa hau ea ESD.
• Kamehla hlahloba ho beoa ha lithapo tsohle pele u kenya matla ho etsa bonnete ba hore likarolo tsa mamati tse tsamaeang li ke ke tsa tšoara lithapo le ho baka tšenyo ea thepa.
• Netefatsa ho tsamaellana le litekanyetso tsohle tse sebetsang tsa polokeho (ke hore ANSI A156.10) ha ho phetheloa ho kenya.
• U SE KE UA leka ho lokisa ka hare ho likarolo. Litokiso tsohle le/kapa tse nchafalitsoeng li tlameha ho etsoa ke BEA, Inc. Ho qhaqhoa kapa ho lokisoa ntle le tumello:
  1. E ka beha polokeho ea motho kotsing mme e ka beha motho kotsing ea ho tsukutloa ke motlakase.
  2. E kanna ea ama ts'ebetso e sireletsehileng le e ts'epahalang ea sehlahisoa e hlahisang waranti e senngoeng.

HLOMELA / KHOPO

Beha li-jumpers

RELAY 1 SEHLAHELO	OMETSE/MFOSA SETSAMAI2	AC SEHLOOHO MOLELETAGE1	DC SEHLOOHO MOLELETAGE2
OMETSA	li-jumpers ka bobeli li behiloe ho DRY	N/A	N/A
WET1	li-jumpers ka bobeli li behiloe ho WET	li-jumpers ka bobeli li behiloe ho AC	li-jumpers ka bobeli li behiloe ho DC

Wiring ho latela ts'ebetso e lakatsehang (supa Tataiso e felletseng ea Basebelisi bakeng sa sete e felletseng ea litšoantšo tsa likhoele).

LINTLHA TSEO

1. Haeba voltage Input ho Br3-X ke AC, ebe khetho ea tlhahiso e ka ba AC kapa DC.
2. Ha tlhahiso ea DC 'WET' e khethoa, terminal ea COM e ntle (+) 'me fatše (-) e fetoloa pakeng tsa NO le NC.

TS'ELISO

1. Tobetsa 'me u tšoare INCR + FUNC metsotsoana e 3.
2. Pontšo e tla fetoha lipakeng tsa FF / 00 bakeng sa metsotsoana e 5
3. Ha FF / 00 e hlahisoa, tobetsa INCR ho potoloha mesebetsi.
4. Hang ha ts'ebetso e lakatsehang e khethiloe, tobetsa FUNC ho potoloha liparamente.
5. Pontšo e tla fetoha lipakeng tsa parameter le boleng ba eona ba hajoale bakeng sa metsotsoana e 5.
6. Tobetsa 3 INCR ho potoloha boleng ba paramethara.
7. Pheta mehato ea 4-7 ho fihlela likarolo tsohle tsa ts'ebetso li behiloe.
8. Ema metsotsoana e 5 bakeng sa Br3-X ho boloka le ho hlahisa ts'ebetso.
9. Lekola sesebelisoa ho netefatsa hore liparamente tsohle tsa ts'ebetso li sebetsa ka nepo le joalo ka ha li reretsoe ts'ebeliso e itseng.

LINTLHA TSEO

1. Function 00 e tima BR3-X.
2. "nP" = ha ho liparamente tse sebetsang bakeng sa ts'ebetso e khethiloeng.
3. Nako ea ho ts'oara li-relay le nako kapa nako ea ho lieha E LOKELA ho hlophisoa bakeng sa relay efe kapa efe e tla sebelisoa. Mohlala: Bakeng sa tšebetso ea 36, ​​haeba ho sebelisoa feela relay 1, h1 e tlameha ho hlophisoa… haeba ho sebelisoa relay 1 le relay 2, h1, h2, le d1 li tlameha ho hlongoa.
4. Ho tobetsa le ho tšoara INCR ho tla potoloha ka potlako.

MESEBETSI TŠEBELETSO

MOSEBETSI	TLHALOSO	MANTSOE
10	sebali-nako	• kenya tshebetsong relay 1 ka trigger of input 1 • reverse logic e fumanehang
11	ratchet/ Ho hohla	• ratchet/latching of relay 1 ka trigger of input 1
22	2-relay sequencer + inhibitor	• tatelano ya relay 1 le relay 2 ka ho thibela ho kenya 1 ho fihlela input 2, input 3, kapa WET input e hlahiswa. • kenya tshebetsong 4 e thibela ho kenya hape 1
28	2-relay sequencer + boemo ba monyako	• tatelano ya relay 1 le relay 2 ka trigger of input 1 kapa WET input • input 2 e dumella tieho ho sebetsa ha e butswe empa e seng ha e kwetswe
29	sebali sa ho tima	• tatelano ya relay 1 le relay 2 ka trigger of input 1 kapa WET input • input 2, hang ha e butsoe ka mor'a tatelano, e lumella relay 1 ho tima • input 2 e dumella tieho ho sebetsa ha e butswe empa e seng ha e kwetswe • kenya 3 thibela tatelano, logic e kgutlelang morao e teng
36	3-relay sequencer + '1-thunya'	• tatelano ya relay 1 le relay 2 le relay 3 ka trigger of input 1 kapa WET input • relay 1, relay 2, le relay 3 e ka hlokomeloa kapa '1-shot'
37	3-relay tatelano le 'relay e ikemetseng'	• tatelano ya relay 1 le relay 2 le relay 3 ka trigger of input 1 kapa WET input • relay 1, relay 2, le relay 3 e ka 'ikemela' kapa ea latellana.
50	interlock timer	• interlock ea relay 1 le relay 2 ka trigger of input 1 le input 2, ka ho latellana.
55	qoaketsane / interlock ratchet	• interlock ratchet ea relay 1 le relay 2 ka trigger of input 1 le input 2, ka ho khetheha.
65	2-tsela 2-relay tatelano	• tatelano ea relay 1 le relay 2 ka trigger of input 1 • tatelano ea relay 2 le relay 1 ka trigger of input 2 • kenya li-trigger tse 3 relay 1 ka bonngoe, kenya 4 triggers relay 2 ka bonngoe
NL	ka tloaelo ntloana e notletsoe	• tatelano ea relay 1 (lonotlolo), relay 2 (monyako), le relay 3 (lisupa tse nkiloeng) bakeng sa matloana a notleloang a nang le batho ba le bang.
NU	ka tloaelo ntloana e sa notleloang	• tatelano ya relay 1 (lonotlolo), relay 2 (lemati), le relay 3 (matshwao a dutseng) bakeng sa matlwana a tlwaelehileng a sa notlelwang, a motho a le mong
DN	3-relay sequencer + 'mode oa motšehare / bosiu'	• tatelano ya relay 1 le relay 2 le relay 3 ka trigger of input 1 kapa WET input • kenya tšebetsong 2 e ipapisitse le kenyeletso 4 ('mokhoa oa letsatsi / bosiu')
00	tima	• Br3-X e thibetsoe • 00 ke tlhophiso ya kamehla mme ha e na tshebetso e abetsweng

LIEKETSENG TŠEBELETSO

PARAMETER	TLHALOSO	MANTSOE
h1*	relay 1 ho tšoara nako	00 - 60 metsotsoana countdown e qala KA MOR'A ho lokolloa ha input 1 kapa WET input
h2*	relay 2 ho tšoara nako	00 - 60 metsotsoana countdown e qala KA MOR'A d1 (tieho lipakeng tsa relay 1 & relay 2) e felile
h3*	relay 3 ho tšoara nako	00 - 60 metsotsoana countdown e qala KA MOR'A d2 (tieho lipakeng tsa relay 1 & relay 3) e felile
d1	tieho lipakeng tsa relay 1 le relay 2	00 - 60, _1 (1/4), _2 (1/2), _3 (3/4) metsotsoana ea ho lieha ho qala AT ts'ebetsong ea ho kenya 1 kapa WET
d2	tieho lipakeng tsa relay 1 le relay 3	00 - 60, _1 (1/4), _2 (1/2), _3 (3/4) metsotsoana ea ho lieha ho qala AT ts'ebetsong ea ho kenya 1 kapa WET
rL	kelello e furallang	00 = logic e tloaelehileng input 1 trigger e tlameha ho ba NO le ho koala lebitso la eona ho qala	01 = logic e khutlelang morao input 1 trigger e tlameha ho ba NC mme e bule lebitso la eona ho qala
nP	ha ho na li-parameter	ha ho li-parameter tse fumanehang bakeng sa ts'ebetso e khethiloeng

LIEKETSENG MOKHOPO

Phepelo Voltage	12 − 24 VAC/VDC ±10%
Tšebeliso ea Hona Joale	30 − 130 mA (DRY output)
Kenyeletso Kenyeletso 1, 2, 3, 4 WET	HO OMETSA 5-24 VAC/VDC ±10%
Contact Relay Relay 1 (DRY) Relay 1 (WET) Phetiso 2 Phetiso 3	3 A @ 24 VAC kapa 30 VDC 1 A 3 A @ 24 VAC kapa 30 VDC 1 A @ 24 VAC kapa 30 VDC

Litlhaloso li ka fetoha ntle le tsebiso esale pele.
Litekanyetso tsohle li lekantsoe ka maemo a ikhethileng.

TEBELLO TS'OANELO

BEA, INC. TEBELLO EA HO KOPANELA TŠEBELETSO/TŠEBELETSO

BEA, Inc., moetsi oa li-sensor, a ke ke a jara boikarabello bakeng sa lits'ebetso tse fosahetseng kapa liphetoho tse fosahetseng tsa sensor / sesebelisoa; ka hona, BEA, Inc. ha e fane ka tiiso ea tšebeliso leha e le efe ea sensor / sesebelisoa ka ntle ho morero oa eona. BEA, Inc. e khothalletsa ka matla hore litsebi tsa ho kenya le ho fana ka litšebeletso li be le setifikeiti sa AAADM bakeng sa mamati a batho ba tsamaeang ka maoto, setifikeiti sa IDA bakeng sa mamati/liheke, le ho koetlisetsoa fektheri bakeng sa mofuta oa tsamaiso ea mamati/heke. Basebeletsi le basebeletsi ba litšebeletso ba na le boikarabelo ba ho etsa tlhahlobo ea kotsi ka mor'a ho kenya / tšebeletso e 'ngoe le e' ngoe e etsoang, ho netefatsa hore ts'ebetso ea mochine oa sensor / sesebelisoa e lumellana le melao ea lehae, ea naha le ea machaba, mekhoa le litekanyetso. Hang ha mosebetsi oa ho kenya kapa oa litšebeletso o phethiloe, tlhahlobo ea polokeho ea lemati/heke e tla etsoa ho latela likhothaletso tsa moetsi oa monyako/heke le/kapa ho latela tataiso ea AAADM/ANSI/DASMA (moo ho hlokahalang) bakeng sa mekhoa e metle ea indasteri.

Litlhahlobo tsa polokeho li tlameha ho etsoa nakong ea mohala o mong le o mong oa litšebeletso - mohlalaamptse ling tsa litlhahlobo tsena tsa polokeho li ka fumanoa ho leibole ea tlhahisoleseling ea AAADM (mohlala ANSI/DASMA 102, ANSI/DASMA 107, UL294, UL325, le Khoutu ea Kaho ea Machabeng). Netefatsa hore matšoao ohle a loketseng a indasteri, litemoso le liplakate li teng.

Ikopanye

• Tšehetso ea Theknoloji le Tšebeletso ea Bareki: 1-800-523-2462
• Lipotso tsa General Tech: techservices-us@BEAsensors.com
• Tech Docs: www.BEAsensors.com

Etela websaete bakeng sa Bukana e felletseng ea Basebelisi le likhetho tsa lipuo

Litokomane / Lisebelisoa

	BEA BR3-X Programmable 3 Relay Logic Module [pdf] Bukana ea Mosebelisi BR3-X Programmable 3 Relay Logic Module, BR3-X, Programmable 3 Relay Logic Module, 3 Relay Logic Module, Logic Module, Module
	BEA BR3-X Programmable 3-Relay Logic Module [pdf] Buka ea Mong'a BR3-X Programmable 3-Relay Logic Module, BR3-X, Programmable 3-Relay Logic Module, 3-Relay Logic Module, Logic Module

Litšupiso

• Bukana ea Mosebelisi