BD SENSORS DCL 531 Probe DCL le Modbus RTU Interface

Litaelo tsa ho kenya

• Tauchsonden DCL mit Modbus RTU Schnittstelle RS485
• Tauchsonde LMK / LMP Probe DCL e nang le sebopeho sa Modbus RTU RS485 Probe LMK / LMP

BALA KA HLOKO PELE HO SEBELISA SESEBETSI SA KEEP BAKENG SA TŠEBELETSO EA KA MOSO

Litaelo tsena tse ntseng li eketseha ke karolo ea bukana e felletseng ea ts'ebetso. E ka kopitsoa leqepheng la rona, haeba u sa tloaelane le sesebelisoa.

http://www.bdsensors.de

Liphetoho tsa tekheniki li bolokiloe

• TLHOKOMELISO - E le ho qoba likotsi ho basebelisi le tšenyo ea sesebelisoa, litaelo tse latelang li tlameha ho etsoa ke basebetsi ba tšoanelehang ba theknoloji.
• TLHOKOMELISO - Latela litaelo tsa polokeho le ts'ebetso tse boletsoeng bukeng ea ts'ebetso. Melao e sebetsang ea polokeho mosebetsing, thibelo ea likotsi hammoho le maemo a naha a ho kenya le mekhoa e amohetsoeng ea boenjiniere e tlameha ho lateloa.

Moeli oa melato le tiisetso

• Ho hloleha ho ela hloko litaelo tse ntseng li eketseha / bukana ea ts'ebetso kapa melaoana ea tekheniki, tšebeliso e fosahetseng le ts'ebeliso e sa reroang, 'me phetoho kapa tšenyo ea sesebelisoa e tla etsa hore ho amohuoe tiisetso le likopo tsa melato.

Tšebeliso e reriloeng

Etsa bonnete ba hore seaplane se lumellana le likarolo tsa mecha ea litaba-metsi le hore sesebelisoa se loketse kopo ntle le lithibelo. Lintlha tsa tekheniki tse thathamisitsoeng leqepheng la hajoale la data lia tlama.

Boitsebiso ba sehlahisoa

Ho phahamisa
Tlamisa probe hantle ho latela litlhoko tsa hau. Ka linako tsohle qoelisa sesebelisoa butle-butle ka har'a mokelikeli o lokelang ho lekanyetsoa! Haeba probe e otla bokaholimo ba metsi, diaphragm e ka senyeha kapa ea senyeha.
Bakeng sa LMK 382 / LMK 382H ka mofuta oa flange etsa bonnete ba hore khoele e ntseng e phahama e hloekile ebile ha ea senyeha le hore O-ring ha e senyehe 'me e lutse ka har'a groove e behiloeng qetellong ea probe. Ka mor'a ho phunyeletsa ka letsoho, probe e tlameha ho tiisetsoa-ho sebelisa wrench e bulehileng (hoo e ka bang 25 Nm).

Litšoantšo tsa lithapo

• 2-wire-system (hona joale)
• 2-terata-system (hona joale) HART
• 2×2-wire-system (hona joale) bakeng sa LMK 307T / LMP 307T
• Sistimi ea terata e 3 (ea hona joale / phepelo)
• 2- terata-system HART (khatello) /
  Sistimi ea terata e 3 (mocheso Pt 100)
• RS 485 / Modbus RTU e nang le ts'ebetso ea reset

HLOKOMELA - Tabeng ea li-gauge tse amanang le khatello, thapo e na le hose ea moea bakeng sa ho lekana ha khatello. Tsamaisa pheletso ea thapo sebakeng kapa lebokoseng le loketseng la khokahano le omeletseng ka hohle kamoo ho ka khonehang le le se nang likhase tse mabifi, e le ho thibela tšenyo leha e le efe.
HLOKOMELA - Sebelisa thapo e sirelelitsoeng le e sothehileng bakeng sa ho hokela motlakase.

Tlhophiso ea Pin

Ho tlosoa ha cap e sireletsang (haeba ho hlokahala)
Bakeng sa ts'ireletso ea diaphragm, tse ling tsa li-probe li na le kepisi ea tšireletso e kentsoeng. Haeba sesebelisoa se tla sebelisoa mecheng ea li-high-viscosity tse kang sludge, ho tlosoa ha cap pele ho qala hoa hlokahala. Ka hona, kutlo e fetoha e bobebe 'me sehare se tla fihla kapele ho diaphragm.
Ho tlosa ka letsoho

1. Tšoara probe ka tsela eo kepisi ea tšireletso e lebang holimo.
2. Tšoara probe ka letsoho le le leng karolong ea sensor (1).
3. Tlosa kepisi ea tšireletso (2) ka letsoho le leng.

Ho tlosoa ka sesebelisoa (ho khothaletsoa)

1. Tšoara probe ka tsela eo kepisi ea tšireletso e lebang holimo.
2. Tsamaisa sesebelisoa se senyenyane se kang screwdriver (8) ka ho toba ka har'a masoba a mabeli a shebaneng le kepisi e sireletsang (2).
3. E tlose ka ho phahamisa letsoho la screwdriver.

HLOKOMELA - Etsa bonnete ba hore sensor (7) tlas'a sekoahelo sa tšireletso e ke ke ea senyeha!
Karohano (ka LMK 358, LMK 358H, LMK 808, LMK 858, LMP 308, LMP 308i le LMP 808)
E le ho nolofatsa ho boloka le ho hlokomela thepa, hlooho ea probe e kenngoa ho kopano ea cable ka sehokelo 'me e ka fetoloa habonolo.
Ho qhaqha

1. Tšoara probe karolong ea sensor (2) ka letsoho le le leng 'me u fetole linate (4) ka hloko ka ho le letšehali ka letsoho le leng. Thibela ho phunyeha ha karolo ea cable (3) khahlanong le matlo!
2. Ha u ntse u phunyeletsa le ho hula karolo ea sensor (2) ho tloha karolong ea cable (3), e tšoare ka ho toba ho thibela tšenyo ea li-plug.

Kopano

• O-rings ha e senyehe (5, 6) kapa O-rings e senyehileng e nkeloe sebaka.
• Radial O-rings (5) e tlositsoe ka Vaseline kapa O-ring grease.
• Masala afe kapa afe a mafura a tlositsoe ho axial O-ring (6).

1. Hokela karolo ea thapo (3) ka kotloloho polakang ea karolo ea sens-sor (2).
2. Tšoara probe karolong ea sensor (2) ka letsoho le le leng. Qhala le ho tiisa nate (4) ka hloko ka letsoho le leng. Thibela ho phunyeha ha karolo ea cable (3) khahlanong le matlo!

Tlhophiso ea Pin ea plug

• BD-Sensors-Str.1; 95199 Thierstein
• Mohala: +49 (0) 92 35 / 98 11 0 | www.bdsensors.de

Litokomane / Lisebelisoa

BD SENSORS DCL 531 Probe DCL le Modbus RTU Interface [pdf] Buka ea Taelo DCL 531, DCL 551, DCL 571, LMK 306, LMK 307, LMK 307T, LMK 309, LMK 358, LMK 358H, LMK 382, ​​LMK 382H, LMK 387, LMK 387MK806, LMK 807MK808 , LMK 809, LMP 858, LMP 305, LMP 307i, LMP 307T, LMP 307, LMP 308i, LMP 308, DCL 808 Probe DCL with Modbus RTU Interface, DCL 531, Probe DCL with Modbus RTU Interface, Modbus RTU Interface , Sehokelo

Litšupiso

• Bukana ea Mosebelisi