BAFANG DP C18 UART Protocol LCD Display
Tlhahisoleseding ya Sehlahiswa
Selelekela sa Pontšo
Pontšo ea DP C18.CAN ke karolo ea sehlahisoa. E fana ka lintlha tsa bohlokoa le litlhophiso tsa sistimi.
Tlhaloso ea Sehlahisoa
Pontšo ea DP C18.CAN e na le mesebetsi le likarolo tse fapaneng tse ntlafatsang boiphihlelo ba mosebelisi. E fana ka tlhahisoleseling ea nako ea nnete joalo ka lebelo, matla a betri, boemo ba tšehetso, le data ea leeto. Pontšo e boetse e lumella ho itlhophisa ka litlhophiso 'me e fana ka likarolo tse ling tse kang mabone a hlooho / backlighting, mokhoa oa ECO/SPORT, le thuso ea ho tsamaea.
Litlhaloso
- Mofuta oa Pontšo: DP C18.CAN
- Tšebelisano: E lumellana le sehlahisoa
Mesebetsi Fetileview
- Pontšo ea lebelo la nako ea sebele
- Pontšo ea matla a betri
- Lintlha tsa leeto (lik'hilomithara, lebelo le holimo, lebelo le tloaelehileng, sebaka, tšebeliso ea matla, nako ea maeto)
- Moqtage pontshi
- Letšoao la matla
- Boemo ba tšehetso/ Thuso ea ho tsamaea
- Pontšo ea data e tsamaellanang le mokhoa oa hajoale
Litaelo tsa Tšebeliso ea Sehlahisoa
Hlahisa Kemiso
- Bula clamps ea pontsho mme o kenye mehele ya rabara ka hare ho clamps.
- Bula clamp holim'a D-pad 'me u e behe sebakeng se nepahetseng holim'a seipollo. Sebelisa screw M3*12 ho tiisa D-pad holim'a handlebar ka tlhoko ea torque ea 1N.m.
- Beha pontšo holim'a handlebar sebakeng se nepahetseng. Sebelisa likurufu tse peli tsa M3*12 ho tiisa ponts'o hore e be boemong bo nang le tlhoko ea torque ea 1N.m.
- Kopanya ponts'o le thapo ea EB-BUS.
Ts'ebetso e Tloaelehileng
Ho fetola Sisteme HO ON/OFF
Ho bulela sistimi, tobetsa 'me u hatelle konopo ea HO BONAHALA (> 2S) skrineng. Tobetsa 'me u tšoare konopo e tšoanang hape (> 2S) ho tima sistimi. Haeba nako ea ho koala ka boiketsetso e setetsoe ho metsotso e 5, skrine e tla tima ka nako e batloang ha e sa sebetse. Haeba ts'ebetso ea password e lumelletsoe, o tlameha ho kenya phasewete e nepahetseng ho sebelisa sistimi.
Khetho ea Maemo a Tšehetso
Ha pontšo e buletsoe, tobetsa konopo ea UP kapa DOWN bakeng sa metsotsoana e 2 ho kenya lebone la hlooho le mabone a morao. Tšoara konopo e tšoanang hape bakeng sa metsotsoana e 2 ho tima lebone la hlooho. Khanya ea lebone la morao e ka fetoloa ho li-setting tsa ponts'o. Haeba ponts'o/Pedelec e buletsoe sebakeng se lefifi, lebone la morao-rao / lebone la hlooho le tla buloa ka bohona. Haeba lebone la morao-rao / lebone la hlooho le tingoe ka letsoho, ts'ebetso ea sensor ea othomathike e koetsoe, 'me u ka khantša lebone ka letsoho feela.
7 MOKHOA OA MOLAO OA DP C18.CAN
MOKHOA OA MOHOEBI PONTS'O
LITŠOANTŠISO
7.1 Tsebiso ea Bohlokoa
2
7.7.2 Khetho ea Maemo a Tšehetso
6
7.2 Kenyelletso ea Pontšo
2
7.7.3 Mokhoa oa ho khetha
6
7.3 Tlhaloso ea Sehlahisoa
3
7.7.4 Mabone a hlooho / backlighting
7
7.3.1 Litlhaloso
3
7.7.5 ECO / SPORT Modus
7
7.3.2 Mesebetsi e Fetaview
3
7.7.6 Thuso ea ho Tsamaea
8
7.4 Ho kenngwa ha Pontsho
4
TŠEBELETSO EA 7.7.7
8
7.5 Tlhahisoleseding ea Pontšo
5
7.8 Di-setting
9
7.6 Tlhaloso ea Sehlooho
5
7.8.1 "Display setting"
9
7.7 Ts'ebetso e Tloaelehileng
6
7.8.2 “Litaba”
13
7.7.1 Ho Fetolela Sisteme HO ON/OFF
6
7.9 Phoso Khoutu Tlhaloso
15
BF-DM-C-DP C18-EN Pulungoana 2019
1
BOHLOKOA TSEBISO
· Haeba tlhahisoleseling ea phoso e hlahang skrineng e ke ke ea lokisoa ho latela litaelo, ka kopo ikopanye le morekisi oa hau.
· Sehlahisoa se etselitsoe ho thibela metsi. Ho khothalletsoa haholo ho qoba ho qoelisa pontšo ka tlas'a metsi.
· Se ke oa hloekisa ponts'o ka jete ea mouoane, mochini o hloekisang khatello e phahameng kapa hose ea metsi.
· Ka kopo sebelisa sehlahisoa sena ka hloko.
· Se ke oa sebelisa li-thiners kapa li-solvents tse ling ho hloekisa skrineng. Lintho tse joalo li ka senya bokaholimo.
· Tiisetso ha e kenyelelitsoe ka lebaka la ho apara le ho sebelisoa ka tloaelo le botsofali.
SELELEKELA PONTŠO
· Mohlala: DP C18.CAN BUS
· Thepa ea matlo ke PC; Glass ea Display e entsoe ka thepa ea boleng bo holimo:
· Leibole e tšoaea ka tsela e latelang:
Tlhokomeliso: Ka kopo boloka leibole ea khoutu ea QR e khomaretsoe thapong ea pontšo. Lintlha tse tsoang ho Leibole li sebelisoa molemong oa ntlafatso ea software e ka bang teng hamorao.
2
BF-DM-C-DP C18-EN Pulungoana 2019
MOKHOA OA MOHOEBI PONTS'O
7.3 TLHALOSO EA SEHLAHLISO
7.3.1 Litlhaloso · Mocheso oa ho sebetsa: -20~45 · Mocheso oa polokelo: -20~50 · Ho se kenelle ha metsi: IP65 · Ho beha mongobo: 30% -70% RH
E sebetsa hapeview
* Pontšo ea lebelo (ho kenyeletsoa lebelo le holimo le lebelo le tloaelehileng, ho fetoha pakeng tsa km le limaele).
· Pontshi ya bokgoni ba betri. · Tlhaloso ea li-sensor tsa othomathiki ea leseli-
tsamaiso ea. · Khanya e beha bakeng sa backlight. · Pontšo ea ts'ehetso ea ts'ebetso. · Motlakase oa motlakase le tlhahiso ea hona joale
sesupo. · Sebaka sa lik'hilomithara (ho kenyeletsoa leeto le le leng
bohole, bohole bo felletseng le bohole bo setseng). · Thuso ea ho tsamaea. · Ho beha maemo a tšehetso. · Letšoao la tšebeliso ea matla KALORI (Hlokomela: Haeba ponts'o e na le ts'ebetso ena). · Pontšo bakeng sa sebaka se setseng. (E ipapisitse le mokhoa oa ho palama) · Ho beha phasewete.
BF-DM-C-DP C18-EN Pulungoana 2019
3
BONTŠA KENYA
1. Bula clamps ea ponts'o le ho kenya mehele ea rabara ka hare ho clamps.
3. Bula clamp holim'a D-pad ebe u e beha sebakeng se nepahetseng, U sebelisa 1 X M3 * 12 screw tiisa D-pad holim'a handlebar. Tlhokahalo ea torque: 1N.m.
2. Joale beha pontšo ho handlebar sebakeng se nepahetseng. Hona joale ka li-screw tsa 2 X M3 * 12 tiisa pontšo hore e be boemong. Tlhokahalo ea torque: 1N.m.
4. Ka kopo, amahanya pontšo le thapo ea EB-BUS.
4
BF-DM-C-DP C18-EN Pulungoana 2019
MOKHOA OA MOHOEBI PONTS'O
7.5 BONTŠA TSEBISO
1
6
2
7
3
8
4 9
10
5
11
12
TŠEBELETSO
1 Nako
2 Sesupo sa ho tjhaja ha USB se hlahisa letshwao , haeba sesebediswa sa kantle sa USB se hoketswe pontshong.
3 Pontsho e bontsha hore lesedi le butswe.
letšoao lena, haeba e
4 Speed Graphics
Leeto la 5: Lik'hilomithara tsa letsatsi le letsatsi (TRIP) - Kakaretso ea lik'hilomithara (ODO) - Lebelo le phahameng (MAX) - Karolelano ea lebelo (AVG) - Range (RANGE) - Tšebeliso ea Matla (CALORIES(feela ka sensor ea torque e kentsoeng)) - Nako ea ho tsamaea (TIME) .
6 Pontšo ea matla a betri ka nako ea nnete.
EA-7-KStage indicator ka voltage kapa ka liphesente.
8 Pontsho ya lebelo la dijithale.
9 Letšoao la matla ka watts / amperes.
10 Boemo ba ho tshehetsa/ Thuso ya ho tsamaya ka maoto
11 Lintlha: Bontša data, e tsamaellanang le mokhoa oa hajoale.
12 Tšebeletso: Ka kōpo bona karolo ea tšebeletso
TLHALOSO SEHLOHO
Holimo Tlase
Leseli la / Off System On/Timme
Ho lokile/kena
BF-DM-C-DP C18-EN Pulungoana 2019
5
7.7 TSAMAISO E TLOAELEHANG
7.7.1 Ho Fetolela Sisteme HO ON/OFF
Tobetsa 'me u hatelle sistimi.
(> 2S) skrineng ho bulela sistimi. Tobetsa o hatelle
(>2S) hape ho thinya
Haeba "nako ea ho koala ka ho iketsa" e behiloe metsotsong ea 5 (e ka behoa ka "Auto Off" mosebetsi, Sheba "Auto Off"), pontšo e tla tima ka nako e lakatsehang ha e sa sebetse. Haeba ts'ebetso ea phasewete e nolofalitsoe, o tlameha ho kenya phasewete e nepahetseng ho sebelisa sistimi.
Khetho ea Maemo a Tšehetso
Ha pontšo e buletsoe, tobetsa konopo kapa (<0.5S) ho fetela boemong ba tšehetso, boemo bo tlaase ka ho fetisisa ke 0, boemo bo phahameng ka ho fetisisa ke 5. Ha tsamaiso e buloa, boemo ba tšehetso bo qala boemong ba 1. Ha ho na tšehetso boemong ba 0.
Mokhoa oa ho khetha
Tobetsa ka bokhutšoanyane konopo ea (0.5s) ho bona mekhoa e fapaneng ea maeto. Leeto: lik'hilomithara tsa letsatsi le letsatsi (TRIP) - kakaretso ea lik'hilomithara (ODO) - Lebelo le phahameng (MAX) - Karolelano ea lebelo (AVG) Range (RANGE) - Tšebeliso ea matla (CALORIES (feela ka sensor ea torque e kentsoeng)) - Nako ea ho tsamaea (NAKO).
6
BF-DM-C-DP C18-EN Pulungoana 2019
MOKHOA OA MOHOEBI PONTS'O
7.7.4 Mabone a hlooho / backlighting
Tšoara konopo ea (> 2S) ho kenya lebone la pele le mabone a morao.
Tšoara konopo ea (> 2S) hape ho tima lebone la pele. Khanya ea lebone le ka morao e ka beoa litlhophisong tsa "Brightness". Haeba ponts'o / Pedelec e buletsoe sebakeng se lefifi, lebone la morao-rao / lebone la hlooho le tla buloa ka bohona. Haeba lebone la morao-rao / lebone la hlooho le tingoe ka letsoho, ts'ebetso ea sensor ea othomathike e koaletsoe. O ka bonesa lebone ka bowena feela. Kamora ho kenya sistimi hape.
7.7.5 ECO/SPORT Modus Tobetsa 'me u tšoare Konopo ea (<2S), ho fetola ho tloha ho mokhoa oa ECO ho ea ho Sport mode. (Ho ipapisitse le mofuta oa moetsi oa pedelec)
BF-DM-C-DP C18-EN Pulungoana 2019
7
7.7.6 Thuso ea ho Tsamaea
Thuso ea Walk e ka etsoa feela ka pedelec e emeng. Ketso: Tobetsa konopo ho fihlela letšoao lena le hlaha. E latelang, tobetsa konopo ha letšoao le hlaha. Joale thuso ea Walk e tla qala. Letšoao le tla benya 'me pedelec e tsamaea hoo e ka bang. 6 km/h. Kamora ho lokolla konopo, enjene e ema ka bo eona ebe e khutlela boemong ba 0.
TŠEBELETSO EA 7.7.7
Pontšo e bonts'a "Tšebeletso" hang ha palo e itseng ea lik'hilomithara kapa litefiso tsa betri li fihletsoe. Ka mileage e fetang 5000 km (kapa 100 charge cycles), mosebetsi oa "Service" o hlahisoa skrineng. Ka nako e 'ngoe le e 'ngoe ea 5000 km pontšo ea "SERVICE" e hlaha nako le nako. Tshebetso ena e ka setwa ho di-setting tsa pontsho.
8
BF-DM-C-DP C18-EN Pulungoana 2019
MOKHOA OA MOHOEBI PONTS'O
LIPEHELO 7.8
Ka mor'a hore pontšo e buloe, ka potlako tobetsa konopo habeli, ho fihlella "SETTINGS" menu. Ka ho tobetsa kapa
(<0.5S) konopo, o ka khetha: Litlhophiso tsa Pontšo, Boitsebiso kapa TSOA. Ebe o tobetsa konopo ea
(<0.5S) konopo ho netefatsa khetho eo u e khethileng.
Kapa khetha "EXIT" 'me u tobetse konopo ea (<0.5S) ho khutlela ho menu e kholo, kapa khetha "BACK"' me u tobetse konopo ea (<0.5S) ho khutlela ho Settings interface.
Haeba ho se na konopo e hatisitsoeng nakong ea metsotsoana e 20, ponts'o e tla khutlela skrineng se seholo 'me ha ho data e tla bolokoa.
7.8.1 "Display setting"
Tobetsa konopo kapa (<0.5S) ho khetha Litlhophiso tsa Pontšo, ebe o tobetsa konopo hakhutšoanyane
(<0.5S) konopo ho fihlella likhetho tse latelang.
U ka tobetsa konopo ea (<0.5S) ka potlako habeli ka nako efe kapa efe, ho khutlela skrineng se seholo.
7.8.1.1 Likhetho tsa "Uniti" ho km/Maele
Tobetsa konopo kapa (<0.5S) ho totobatsa "Unit" ho menu ea li-setting tsa Display, ebe o tobetsa konopo ea (<0.5S) ho khetha. Ebe ka konopo kapa konopo khetha pakeng tsa "Metric" (kilomita) kapa "Imperial" (Miles). Ha u se u khethile khetho eo u e batlang, tobetsa konopo ea (<0.5S) ho boloka le ho tsoa ho "Display setting" interface.
BF-DM-C-DP C18-EN Pulungoana 2019
9
7.8.1.2 "Keletso ea Ts'ebeletso" Ho bulela le ho tima tsebiso
Tobetsa konopo kapa (<0.5S) ho totobatsa "Tšebeletso ea Tip" ho menu ea li-setting tsa Display, ebe o tobetsa (<0.5S) ho khetha. Ebe ka konopo kapa konopo khetha pakeng tsa "ON" kapa "OFF". Hang ha u khethile khetho eo ue batlang, tobetsa konopo
(<0.5S) konopo ho boloka le ho tsoa ho "Display setting" interface.
7.8.1.3 “Khanya” Bontša ho khanya
Tobetsa konopo kapa (<0.5S) ho totobatsa "Khanya" ho menu ea li-setting tsa Display. Ebe o tobetsa (<0.5S) ho khetha. Ebe ka konopo kapa konopo khetha pakeng tsa "100%" / "75%" / "50%" /" 30%"/"10%" . Ha u se u khethile khetho eo u e batlang, tobetsa konopo ea (<0.5S) ho boloka le ho tsoa ho "Display setting" interface.
7.8.1.4 "Auto Off" Beha nako ea ho tima sistimi e iketsang
Tobetsa konopo kapa (<0.5S) ho totobatsa "Auto Off" ho menu ea li-setting tsa Display, ebe o tobetsa (<0.5S) ho khetha. Ebe ka konopo kapa konopo khetha pakeng tsa “OFF”, “9”/”8″/”7″/”6″/”5″/”4″/”3″ /”2″/”1″, (Linomoro li lekantsoe ka metsotso). Ha u se u khethile khetho eo u e batlang, tobetsa konopo ea (<0.5S) ho boloka le ho tsoa ho "Display setting" interface.
totobatsa "Max Pass" ho li-setting tsa Display menu, ebe o tobetsa (<0.5S) ho khetha. Ebe ka konopo kapa konopo khetha pakeng tsa "3/5/9" (boima ba maemo a tšehetso). Ha u se u khethile khetho eo u e batlang, tobetsa konopo ea (<0.5S) ho boloka le ho tsoa ho "Display setting"
7.8.1.6 "Default Mode" Beha mokhoa oa ECO / Sport
Tobetsa konopo kapa (<0.5S) ho totobatsa "Default Mode" ho menu ea li-setting. Ebe o tobetsa (<0.5S) ho khetha. Ebe ka konopo kapa konopo khetha pakeng tsa "ECO" kapa "Sport". Ha u se u khethile khetho eo u e batlang, tobetsa konopo ea (<0.5S) ho boloka le ho tsoa ho "Display setting" interface.
7.8.1.7 “Matla View” Ho seta sesupo sa matla
Tobetsa kapa (<0.5S) konopo ho totobatsa "Power View” ho di-setting tsa Display menu, ebe o tobetsa (<0.5S) ho khetha. Ebe ka konopo kapa konopo khetha pakeng tsa "Matla" kapa "Current". Ha u se u khethile khetho eo u e batlang, tobetsa konopo ea (<0.5S) ho boloka le ho tsoa ho "Display setting" interface.
7.8.1.5 "MAX PAS" Boemo ba Tšehetso (Mosebetsi ha o fumanehe ka pontšo ea ECO/SPORT) Tobetsa kapa (<0.5S) konopo ho
10
BF-DM-C-DP C18-EN Pulungoana 2019
MOKHOA OA MOHOEBI PONTS'O
7.8.1.8 “SOC View”Betri view ka liperesente tsa volt
Tobetsa konopo kapa (<0.5S) ho totobatsa "SOC View” ho di-setting tsa Display menu, ebe o tobetsa (<0.5S) ho khetha. Ebe ka konopo kapa konopo khetha pakeng tsa "percent" kapa "voltage ". Ha u se u khethile khetho eo u e batlang, tobetsa konopo ea (<0.5S) ho boloka le ho tsoa ho "Display setting"
7.8.1.9 “TRIP Reset” Seta sebaka botjha Tobetsa konopo kapa (<0.5S) ho totobatsa “TRIP Reset” ho di-setting tsa Display menu, ebe o tobetsa (<0.5S) ho kgetha. Ebe ka konopo kapa konopo khetha pakeng tsa "YES" kapa "NO". Ha u se u khethile khetho eo u e batlang, tobetsa konopo ea (<0.5S) ho boloka le ho tsoa ho "Display setting"
7.8.1.10 "AL Sensitivity" Ho utloahala ha leseli la hlooho ka ho iketsa
Tobetsa konopo kapa (<0.5S) ho totobatsa "AL-Sensetivity" ho li-setting tsa Display, ebe o tobetsa (<0.5S) ho khetha. Ebe ka konopo kapa konopo khetha pakeng tsa "0" / ”1″ / ”2″/ “3” / “4”/ “5”/ “OFF”. Ha u se u khethile khetho eo u e batlang, tobetsa konopo ea (<0.5S) ho boloka le ho tsoa ho "Display setting"
7.8.1.11 "Password"
Tobetsa kapa (<0.5S) konopo ho khetha Password ho menu. Ebe ka ho tobetsa hakhutšoanyane (<0.5S) ho kenya khetho ea password. Hona joale hape ka likonopo kapa (<0.5S) li totobatsa "Start Password" ebe o tobetsa konopo ea (<0.5S) ho netefatsa. Joale hape ka ho sebelisa kapa (<0.5S) Konopo khetha pakeng tsa "ON" kapa "OFF" ebe o tobetsa konopo ea (<0.5S) ho netefatsa.
Joale o ka kenya khoutu ea hau ea linomoro tse 4. Ka ho sebelisa kapa (<0.5S) konopo khetha linomoro pakeng tsa "0-9". Ka ho tobetsa konopo ea (<0.5S) hakhutšoanyane u ka fetela nomorong e latelang.
Kamora ho kenya khoutu ea hau ea linomoro tse 4, o tlameha ho kenya linomoro tse 4 hape tseo u li khethileng, ho netefatsa hore khoutu e nepahetse.
Kamora ho khetha phasewete, nakong e tlang ha u bulela sistimi e tla u kopa ho kenya phasewete ea hau. Tobetsa konopo kapa (<0.5S) ho khetha linomoro, Ebe u tobetsa hakhutšoanyane (<0.5S) ho netefatsa.
Ka mor'a ho kenya nomoro e fosahetseng ka makhetlo a mararo, tsamaiso ea tima. Haeba u lebetse phasewete, ka kopo ikopanye le morekisi oa hau.
BF-DM-C-DP C18-EN Pulungoana 2019
11
Ho fetola password:
Tobetsa kapa (<0.5S) konopo ho khetha Password ho menu. Ebe ka ho tobetsa hakhutšoanyane (<0.5S) ho kenya karolo ea password. Hona joale hape ka konopo ea kapa (<0.5S) e totobatsa "Password set" ebe o tobetsa konopo ea (<0.5S) ho netefatsa. Joale ka likonopo kapa (<0.5S) 'me u totobatse "Reset Password" le ka konopo ea (<0.5S) ho netefatsa.
Ka ho kenya phasewete ea hau ea khale hang, ebe u kenya phasewete e ncha habeli, ebe password ea hau e tla fetoloa.
Ho tima phasewete:
Ho koala phasewete, sebelisa kapa likonopo ho fihla sebakeng sa "Password" ebe o tobetsa konopo ea (<0.5S) ho totobatsa khetho ea hau. Tobetsa kapa (<0.5S) konopo ho fihlela e bonts'a "OFF". Ebe o tobetsa hakhutšoanyane (<0.5S) ho khetha.
Joale kenya phasewete ea hau, ho e tima.
12
BF-DM-C-DP C18-EN Pulungoana 2019
7.8.1.12 "Set Clock" Tobetsa kapa (<0.5S) Konopo ho fihlella "Set Clock" menu. Ebe o tobetsa konopo ea (<0.5S) hakhutšoanyane ho netefatsa khetho. Joale tobetsa konopo kapa (<0.5S) ebe u kenya nomoro e nepahetseng (nako) ebe u tobetsa konopo ea (<0.5S) ho ea nomorong e latelang. Kamora ho kenya nako e nepahetseng, tobetsa konopo ea (<0.5S) ho netefatsa le ho boloka.
7.8.2 “Boitsebiso” Hang ha sistimi e buletsoe, ka potlako Tobetsa konopo
(<0.5S) konopo habeli ho fihlella "SETTINGS" menu. Tobetsa kapa (<0.5S) konopo ho khetha "Information", ebe o tobetsa (<0.5S) konopo ho netefatsa khetho ea hau. Kapa khetha ntlha "Back" ka ho netefatsa le
(<0.5S) konopo ho khutlela ho menu e kholo.
7.8.2.1 Boholo ba Wheel le Moedi oa Lebelo "Boholo ba Wheel" le "Speed Limit" li ke ke tsa fetoloa, lintlha tsena li mona ho tla viewed feela.
BF-DM-C-DP C18-EN Pulungoana 2019
7.8.2.2 Litaba tsa Battery
Tobetsa kapa (<0.5S) konopo ho kena ho menu ea Battery Info, ebe o tobetsa konopo
(<0.5S) konopo ho khetha netefatsa. Joale tobetsa konopo kapa (<0.5S) ebe u khetha "Back" kapa "Next Page". Ebe o tobetsa konopo ea (<0.5S) ho netefatsa, joale u ka bala lintlha tsa betri.
Litaba
Tlhaloso
TEMP
Thempereichara ea hajoale ka likhato (°C)
TotalVolt
Moqtage (V)
Hona joale
Ho tsoa (A)
Res Cap
Bokhoni bo setseng (A/h)
Cap e feletseng
Kakaretso ea Bokhoni (A/h)
RelChargeState
Boemo ba ho Laela ba kamehla (%)
AbsChargeState
Tefiso ea hang-hang (%)
Linako tsa Cycle
Linako tsa ho tjhaja (nomoro)
Nako ea ho Tlosa Nako e telele
Nako e kholo eo ho seng tefiso e entsoeng (Hr)
Nako ea ho Qetela ea ho Khaola
Kakaretso ea Sele
Nomoro (motho ka mong)
Sele Voltage 1
Sele Voltage 1 (m/V)
Sele Voltage 2
Sele Voltage 2 (m/V)
Sele Voltagen
Sele Voltagen (m/V)
HW
Hardware Version
SW
Software Software
ELA HLOKO: Haeba ho se data e fumanweng, “–” e tla hlaha.
13
MOKHOA OA MOHOEBI PONTS'O
7.8.2.3 Boitsebiso ba Molaoli
Tobetsa konopo kapa (<0.5S) ebe u khetha "CTRL Info", ebe o tobetsa konopo ea (<0.5S) ho netefatsa. Hona joale o ka bala lintlha tsa molaoli. Ho Tsoa, tobetsa konopo ea (<0.5S), hang ha "EXIT" e totobalitsoe ho khutlela ho litlhophiso tsa tlhahisoleseling.
7.8.2.5 Boitsebiso ba Torque
Tobetsa konopo kapa (<0.5S) ebe u khetha "Torque info", ebe o tobetsa konopo ea (<0.5S) ho bala software le hardware data pontshong. Ho Tsoa, tobetsa konopo ea (<0.5S), hang ha "EXIT" e totobalitsoe ho khutlela ho litlhophiso tsa tlhahisoleseling.
7.8.2.4 Tlhahisoleseding ea Pontšo
Tobetsa konopo kapa (<0.5S) ebe o khetha Display Info, ebe o tobetsa konopo ea (<0.5S) ho bala software le hardware data pontshong. Ho Tsoa, tobetsa konopo ea (<0.5S), hang ha "EXIT" e totobalitsoe ho khutlela ho litlhophiso tsa tlhahisoleseling.
7.8.2.6 Khoutu ea Phoso
Tobetsa konopo kapa (<0.5S) ebe o khetha "Error Code", ebe o tobetsa konopo ea (<0.5S) ho netefatsa. E bonts'a lintlha tsa phoso bakeng sa liphoso tse leshome tsa ho qetela tsa pedelec. Khoutu ea phoso "00" e bolela hore ha ho na phoso. Ho khutlela ho menu tobetsa konopo ea (<0.5S), hang ha "BACK" e totobalitsoe ho khutlela ho litlhophiso tsa tlhahisoleseding.
14
BF-DM-C-DP C18-EN Pulungoana 2019
MOKHOA OA MOHOEBI PONTS'O
7.9 TLHALOSO YA KHOUTU E PHOSO
HMI e ka bonts'a liphoso tsa Pedelec. Ha phoso e fumanoa, lets'oao le tla bonts'oa mme e 'ngoe ea likhoutu tse latelang tsa phoso le eona e tla bontšoa.
Tlhokomeliso: Ka kopo bala ka hloko tlhaloso ea khoutu ea phoso. Ha khoutu ea phoso e hlaha, ka kopo qala ka ho qala sistimi hape. Haeba bothata bo sa felisoe, ka kopo ikopanye le morekisi oa hau kapa basebetsi ba tekheniki.
Phoso
Phatlalatso
Ho batle phoso
04
The throttle e na le phoso.
1. Hlahloba sehokelo le thapo ea throttle ha e senyehe ebile e hokahane ka nepo.
2. Tlosa 'me u kopanye throttle hape, haeba ho ntse ho se na mosebetsi ka kopo fetola throttle.
05
The throttle ha e khutlele ho eona
Sheba hore sehokelo ho tloha ho throttle se amana hantle. Haeba sena se sa rarolle bothata, ka kopo
boemo bo nepahetseng.
fetola throttle.
07
Ho tlolatage tshireletso
1. Ntsha ebe o kenya betri hape ho bona hore na e rarolla bothata. 2. Ho sebelisa BESST sesebelisoa nchafatsa molaoli. 3. Fetola betri ho rarolla bothata.
1. Sheba hore lihokelo tsohle tse tsoang mochineng li nepahetse
08
Phoso e hokahaneng le lets'oao la sensor ea holo.
ka hare ho enjene
2. Haeba bothata bo ntse bo etsahala, ka kopo fetola
dilenaneo.
09
Phoso le karolo ea Enjine Ka kopo fetola enjene.
1. Koala tsamaiso 'me u lumelle Pedelec hore e pholile
Mocheso ka hare ho en- tlase.
10
gine e fihletse boholo ba eona
boleng ba tshireletso
2. Haeba bothata bo ntse bo etsahala, ka kopo fetola
dilenaneo.
11
Sensor ea mocheso ka hare Ka kopo fetola enjene.
enjene e na le phoso
12
Phoso le sensor ea hajoale ho molaoli
Ka kopo fetola molaoli kapa ikopanye le mofani oa thepa ea hau.
BF-DM-C-DP C18-EN Pulungoana 2019
15
Phoso
Phatlalatso
Ho batle phoso
1. Sheba hore lihokelo tsohle tse tsoang betri li nepahetse
13
Phoso ka sensor ea mocheso ka hare ho betri
e hokahaneng le enjene. 2. Haeba bothata bo ntse bo etsahala, ka kopo fetola
Betri.
1. Lumella pedelec ho pholile fatše 'me u qale hape
Mocheso oa tšireletso
tsamaiso.
14
ka hare ho molaoli o fihlile
boleng ba eona bo phahameng ba tšireletso
2. Haeba bothata bo ntse bo etsahala, ka kopo fetola
molaoli kapa ikopanye le morekisi oa hau.
1. Lumella pedelec ho pholile fatše 'me u qale hape
Phoso ka mocheso
tsamaiso.
15
sensor ka hare ho molaoli
2. Haeba bothata bo ntse bo hlaha, ka kopo fetola con-
troller kapa ikopanye le morekisi oa hau.
21
Phoso ea sensor ea lebelo
1. Qala bocha sistimi
2. Etsa bonnete ba hore makenete e hoketsoeng puong e tsamaisana le sensor ea lebelo le hore sebaka se pakeng tsa 10 mm le 20 mm.
3. Sheba hore sehokelo sa sensor ea lebelo se hokahane ka nepo.
4. Kopanya pedelec ho BESST, ho bona hore na ho na le pontšo e tsoang ho sensor ea lebelo.
5. Ho sebelisa BESST Tool- nchafatsa molaoli ho bona hore na o rarolla bothata.
6. Fetola sensor ea lebelo ho bona hore na sena se felisa bothata. Haeba bothata bo ntse bo etsahala, ka kopo fetola molaoli kapa ikopanye le mofani oa thepa ea hau.
25
Phoso ea lets'oao la torque
1. Sheba hore likhokahano tsohle li hokahane ka nepo.
2. Ka kopo, kopanya pedelec ho BESST system ho bona hore na torque e ka baloa ke sesebelisoa sa BESST.
3. Ho sebelisa BESST Tool ho ntlafatsa molaoli ho bona hore na o rarolla bothata, haeba ho se joalo ka kopo fetola sensor ea torque kapa ikopanye le mofani oa hau.
16
BF-DM-C-DP C18-EN Pulungoana 2019
MOKHOA OA MOHOEBI PONTS'O
Phoso
Phatlalatso
Ho batle phoso
1. Sheba hore likhokahano tsohle li hokahane ka nepo.
2. Ka kopo, hokela pedelec ho BESST system ho
bona hore na lets'oao la lebelo le ka baloa ke sesebelisoa sa BESST.
26
Letšoao la lebelo la sensor ea torque le na le phoso
3. Fetola Pontšo ho bona hore na bothata bo rarollotsoe.
4. Ho sebelisa BESSST Tool ntjhafatsa molaoli ho bona
haeba e rarolla bothata, haeba ho se joalo, ka kopo fetola
sensor ea torque kapa ikopanye le morekisi oa hau.
Ho sebelisa sesebelisoa sa BESST nchafatsa molaoli. Haeba e
27
Overcurrent ho tloha ho molaoli
bothata bo ntse bo etsahala, ka kopo fetola molaoli kapa
ikopanye le morekisi oa hau.
1. Sheba hore likhokahano tsohle tsa pedelec li hokahane ka nepo.
2. Ho sebelisa BESST Tool ho etsa tlhahlobo ea tlhahlobo, ho bona hore na e ka supa bothata.
30
Bothata ba puisano
3. Fetola ponts'o ho bona hore na bothata bo rarollotsoe.
4. Fetola thapo ya EB-BUS ho bona hore na e rarolla bothata
bothata.
5. U sebelisa sesebelisoa sa BESST, tsosolosa software ea molaoli hape. Haeba bothata bo ntse bo etsahala ka kopo fetola molaoli kapa ikopanye le mofani oa thepa ea hau.
1. Hlahloba lihokelo tsohle li hoketsoe ka nepo
mariki.
Letšoao la brake le na le phoso
33
2. Fetola mariki ho bona hore na bothata bo rarollotsoe.
(Haeba li-sensor tsa brake li kentsoe)
Haeba bothata bo tsoela pele Ka kopo fetola molaoli kapa
ikopanye le morekisi oa hau.
35
Potoloho ea 15V e na le phoso
U sebelisa sesebelisoa sa BESST ntlafatsa molaoli ho bona hore na sena se rarolla bothata. Haeba ho se joalo, ka kopo fetola
molaoli kapa ikopanye le morekisi oa hau.
36
Potoloho ea ho lemoha holim'a letlapa la likonopo
U sebelisa sesebelisoa sa BESST ntlafatsa molaoli ho bona hore na sena se rarolla bothata. Haeba ho se joalo, ka kopo fetola
e na le phoso
molaoli kapa ikopanye le morekisi oa hau.
BF-DM-C-DP C18-EN Pulungoana 2019
17
Phoso
Phatlalatso
Ho batle phoso
37
Potoloho ea WDT e fosahetse
U sebelisa sesebelisoa sa BESST ntlafatsa molaoli ho bona hore na sena se rarolla bothata. Haeba ho se joalo, ka kopo fetola molaoli kapa ikopanye le mofani oa thepa ea hau.
Kakaretso ea voltage ho tloha betri ke
41
hodimo haholo
Ka kopo fetola betri.
Kakaretso ea voltage tsoa ho betri ke Ka kopo tjhaja betri. Haeba bothata bo ntse bo le teng,
42
tlase haholo
ka kopo fetola betri.
43
Kakaretso ea matla a tsoang betri
Ka kopo fetola betri.
lisele li phahame haholo
44
Moqtage ea sele e le 'ngoe e phahame haholo
Ka kopo fetola betri.
45
Mocheso o tsoang betri ke Ka kopo lumella pedelec hore e phomole.
hodimo haholo
Haeba bothata bo ntse bo hlaha, ka kopo fetola betri.
46
Thempereichara ea betri Ka kopo tlisa betri mochesong oa kamore. Haeba e
e tlase haholo
bothata bo ntse bo etsahala, ka kopo fetola betri.
47
SOC ea betri e phahame haholo Ka kopo fetola betri.
48
SOC ea betri e tlase haholo
Ka kopo fetola betri.
1. Hlahloba hore gear shifter ha e tsoetsoe.
61
Ho fetola bothata ba ho lemoha
2. Ka kopo fetola mochine o fetolang lisebelisoa.
62
Elektronike derailleur ha e khone
Ka kopo fetola derailleur.
lokolla.
1. Ho sebelisa sesebelisoa se MOLEMO ho ntlafatsa Pontšo ho bona hore na ho joalo
e rarolla bothata.
71
Senotlolo sa elektroniki se koalehile
2. Fetola ponts'o haeba bothata bo ntse bo etsahala,
ka kopo fetola senotlolo sa elektroniki.
U sebelisa sesebelisoa sa BESST, nchafatsa software hape
81
Bluetooth module e na le phoso skrineng ho bona hore na e rarolla bothata.
Haeba ho se joalo, Ka kopo fetola ponts'o.
18
BF-DM-C-DP C18-EN Pulungoana 2019
Litokomane / Lisebelisoa
 |
BAFANG DP C18 UART Protocol LCD Display [pdf] Bukana ea Mosebelisi DP C18 UART Protocol LCD Display, DP C18, UART Protocol LCD Display, Protocol LCD Display, LCD Display, Display |