DP C010.CB Pontšo ea LCD
Bukana ea Mosebelisi
BOHLOKOA TSEBISO
- Haeba lintlha tsa phoso tse hlahang skrineng li ke ke tsa lokisoa ho latela litaelo, ka kopo ikopanye le morekisi oa hau.
- Sehlahisoa se etselitsoe ho thibela metsi. Ho khothalletsoa haholo ho qoba ho qoelisa pontšo ka tlas'a metsi.
- Se ke oa hloekisa ponts'o ka jet ea mouoane, sehloekisi sa khatello e phahameng kapa hose ea metsi.
- Ka kopo sebelisa sehlahisoa sena ka hloko.
- Se ke oa sebelisa li-thiners kapa li-solvents tse ling ho hloekisa skrineng. Lintho tse joalo li ka senya bokaholimo.
- Warranty ha e kenyelelitsoe ka lebaka la ho apara le tšebeliso e tloaelehileng le botsofali.
SELELEKELA PONTŠO
- Mohlala: DP C010.CB
- Ntlo e entsoe ka PC + ABS; lifensetere tsa LCD li entsoe ka khalase e futhumetseng; konopo e entsoe ka ABS:
- Letšoao la li-label ke ka tsela e latelang:
DPC010CBF80101.0 PD051505
Hlokomela: Ka kopo, boloka leibole ea khoutu ea QR e khomaretsoe thapong ea pontšo. Lintlha tse tsoang ho Leibole li sebelisoa molemong oa ntlafatso ea software e ka bang teng hamorao.
TLHALOSO EA SEHLAHISOA
7.3.1 Tlhaloso
- 4.0", 480*800 (RGB) TFT skrine
- Power supply: 36/43/48/50.4/60/72Vdc
- Mocheso oa ho sebetsa: -20 ℃ ~ 45 ℃
- Mocheso oa polokelo: -20 ℃ ~ 60 ℃
- Ha e kenelle metsi: IP66
- Mongobo oa polokelo: 30% -70% RH
7.3.2 Functional Overview
- Pontšo ea matla a betri
- Khetho ea mokhoa o thusoang ke matla
- Sesupo sa lebelo (ho kenyeletsoa le lebelo le holimo. lebelo le karolelano ea lebelo)
- Yuniti e fetoha pakeng tsa km le mile
- Pontšo ea matla a motlakase
- Pontšo ea mileage (ho kenyeletsoa sebaka sa leeto le le leng la TRIP, sebaka se felletseng sa ODO, le sebaka se setseng sa sebaka)
- Thuso ea ho tsamaea
- Automatic sensors tlhaloso ea tsamaiso ea mabone
- Khanya e beha bakeng sa lebone la morao
- Pontšo e bohlale (ho kenyeletsoa tšebeliso ea matla CAL le Cadence, ha feela molaoli ea ts'oanang a ts'ehetsa ts'ebetso ena)
- Lintlha tsa taolo, HMI le betri
- Khoutu ea phoso le sesupo sa khoutu ea tlhokomeliso
- Mosebetsi oa Bluetooth
- Tefiso ea USB (tekanyo e phahameng ea hajoale: 1A)
- Pontšo ea litšebeletso
- Pontsho ya tshupanako
- Merero e 3 (Lipapali, Feshene, Theknoloji)
- Lipuo tse 6 (Senyesemane, Sejeremane, Sedache, Sefora, Setaliana, Seczech)
BONTŠA
- Pontšo ea matla a betri
- Lemosa khoutu e bontšang
- Lebelo ka nako ea nnete
- Lebelo la lebelo
- Pontšo ea mokhoa oa thuso ea matla (Mefuta e 4/
- Mekhoa)
- Phetoho ea lebelo la likarolo (km/h, mph)
- Pontšo ea ts'ebetso e ngata (Clock. TRIP, ODO, MAX, AVG, Range, CAL, Cadence, Nako)
- Letšoao la matšoao (Lebone la hlooho, USB, Tšebeletso, Bluetooth)
TLHALOSO SEHLOHO
TLOAELEHILE TS'EBE
7.6.1 Motlakase ON/OFF
Tobetsa 
'me u tšoare (> 2S) ho kenya matla ho HMI, 'me HMI e bonts'a boot up LOGO.
Tobetsa 'me u tšoare (>2S) hape ho tima HMI.
7.6.2 Kgetho ya Mokgwa o Thusang ka Matla
Ha HMI e butse, tobetsa hakhutšoanyane 
or 
(<0.5S) ho khetha mokhoa oa thuso ea matla le ho fetola matla a tlhahiso ea motlakase. 4 Mekhoa kapa Mekhoa ea 6 e ka khethoa, empa khetho ea kamehla ke Mekhoa ea 6 eo mokhoa o tlaase ka ho fetisisa e leng ECO le mokhoa o phahameng ka ho fetisisa ke BOOST. Boemo ba kamehla ke ECO ka mor'a hore HMI e sebetse, mode OFF e bolela hore ha ho na thuso ea matla. 
7.6.3 Lebone la hlooho / Lebone le ka morao
Lebone la hlooho le ka khantšoa ka letsoho kapa ka boiketsetso. Ha HMI e sebetsa, leseli la koloi le sebetsa. Tobetsa o hatelle (>2S) ho bonesa lebone le ho fokotsa khanya ea lebone la morao. Tobetsa le tšoara (> 2S) hape ho tima lebone la hlooho le ho eketsa khanya ea backlight.
(Hlokomela: Lebone la hlooho le ka fetoloa ka bo eona ho latela leseli le haufi, empa ts'ebetso ea lebone la koloi e hloleha hang ha mosebelisi a switjha lebone la hlooho / tima. Kamora ho qala HMI bocha, ts'ebetso e sebetsa hape.)
7.6.4 Thuso ea ho Tsamaea
Tlhokomeliso: Thuso ea ho tsamaea e ka etsoa feela ka e-baesekele e emeng.
Tobetsa ka bokhutšoanyane konopo (<0.5S) ho fihlela letšoao lena 
e hlaha. E latelang 'ne u tobetse konopo ea konopo ho fihlela thuso ea ho tsamaea e kentsoe le ho letšoao lea phatsima. (Ha lebelo la nako ea sebele le ka tlase ho 2.5km/h, pontšo ea lebelo e bontšoa e le 2.5km/h.) Hang ha u lokolla konopo, e tla tsoa thuso ea ho tsamaea le ho letshwao le emisa ho benya. Haeba ho se na ts'ebetso nakong ea 5s, HMI e tla khutlela ho mode OFF. 
7.6.5 Khetho ea Multifunction
Tobetsa ka bokhutšoanyane konopo (<0.5S) ho fetola ts'ebetso e fapaneng le tlhaiso-leseling. Boemo ba pontšo ea mesebetsi e mengata e bonts'a oache ea nako ea sebele (Clock) → sebaka se le seng sa leeto (TRIP, km) → kakaretso ea sebaka (ODO, km) → lebelo le phahameng (MAX, km/h) → lebelo le tloaelehileng (AVG, km/h ) → sebaka se setseng (Range, km) → tšebeliso ea matla (CAL, kcal) → ho palama cadence (Cadence, rpm) → nako ea ho palama (Nako, metsotso) → potoloho.
7.6.6 Pontšo ea Bokhoni ba Betri
HMI e bonts'a matla a betri ea nako ea 'nete ho tloha ho 100% ho isa ho 0%. Ha matla a betri a le ka tlase ho 5%, letšoao le tla panya ka makhetlo a 1 Hz ho lemosa hore e tla tjhaja hape.
7.6.7 Mosebetsi oa Bluetooth
HMI ena e na le ts'ebetso ea OTA, e ka nchafatsang firmware ea HMI, controller, sensor le betri ka Bluetooth.
HMI ena e ka hokeloa ho Bafana Go+ APP ka Bluetooth.
https://link.e7wei.cn/?gid=127829
https://link.e7wei.cn/?gid=127842
(BAFANG GO+ bakeng sa Android le iota ) Lintlha tse ka romelloang ho APP ke tse latelang:
| 1 | Mosebetsi |
| 2 | Lebelo |
| 3 | Mokhoa o thusoang ke matla |
| 4 | Bokhoni ba betri |
| 5 | Boemo ba khanya ea hlooho |
| 6 | LEETO |
| 7 | KUTLOA |
| 8 | Range |
| 9 | Ho otla ha pelo (ho ikemiseditse) |
| 10 | Likhalori |
| 11 | Letšoao la kutlo |
| 12 | Lintlha tsa betri. |
| 13 | Lintlha tsa sistimi. |
| 14 | Khoutu ea phoso |
7.6.8 Ts'ebetso ea Tefiso ea USB
Ha HMI e timme, kenya thapo ya USB boemakepeng ba tjhaja ho HMI, ebe o bulela HMI ho qala ho tjhaja. Tefiso e phahameng ka ho fetisisatage ke 5V mme tefiso e phahameng ea hajoale ke 1A.7.6.9 Keletso ea Tšebeletso
Ha kakaretso ea sebaka se feta 5000 km, the 
Letšoao le tla hlahisoa ho HMI, le hopotsa basebelisi ho ea setsing sa thekiso ea kamora ho rekisa bakeng sa tlhokomelo. Tshebetso e timilwe ka ho sa feleng.
7.6.10 Riding Data Interface
Tobetsa habeli ho konopo (<0.5S) ho kenya sebopeho sa data ea ho palama. Tobetsa ea konopo (<0.5S) ho fetola maqephe. Tobetsa konopo ea konopo (<0.5S) hape ho khutlisa segokanyimmediamentsi sa sebolokigolo.
Ha lebelo la nako ea 'nete le le ka tlase ho 5 km / h mme mokhoa o thusang motlakase o sa tsamaee, tobetsa o hatelle. konopo (> 2S) ho hlakola lintlha tsa ho palama tsa Leeto, MAX, AVG, Nako.
LIEKETSENG
7.7.1 Sehokelo sa “Li-setting tsa kapele”
Ha o le sebopehong se seholo, tobetsa o hatelle the le konopo (ka nako e ts'oanang) ho kenya sebopeho sa "Quick settings".
Ha o le "Quick settings" interface, tobetsa o hatelle le konopo (ka nako e ts'oanang) ho tsoa morao ho sebopeho se seholo.
7.7.1.1 "Khanya" Beha khanya ea backlight
Tobetsa konopo ea or konopo (<0.5S) ho khetha "Khanya", 'me ka bokhutšoanyane tobetsa ea ho kenya ntho. Ebe u khetha palo eo u e batlangtage ho tloha 10% ho 100% ka ho tobetsa ea or konopo, ebe o tobetsa konopo ea konopo (<0.5S) ho boloka le ho tsoa ho khutlela sebopeho sa "Quick settings".
7.7.1.2 "Auto off" Seta nako ea ho tima ka boiketsetso
Tobetsa konopo ea or konopo (<0.5S) ho khetha "Auto tima", 'me ka bokhutšoanyane tobetsa ea ho kenya ntho. Ebe u khetha nako ea ho tima e le "OFF"/"1"/"2"/"3"/"4"/"5"/"6"/"7"/"8"/"9" ka or konopo. Hang ha u khethile khetho eo ue batlang, tobetsa konopo (<0.5S) ho boloka le ho tsoa ho khutlela sebopeho sa "Quick settings".
Hlokomela: "Tima" e bolela hore "Auto Off" e koetsoe.
7.7.1.3 "Setting oache" Seta oache
Tobetsa konopo ea or konopo (<0.5S) ho kenya tlhophiso ea "Time format", 'me u tobetse ka bokhutšoanyane konopo ho khetha "12h" kapa "24h".
Tobetsa konopo ea or konopo (<0.5S) ho khetha ntho ea "Clock setting", tobetsa ka bokhutšoanyane konopo ho kenya ntho. Ebe u beha nako e nepahetseng ka ho tobetsa konopo eaor konopo, ebe o tobetsa konopo ea konopo (<0.5S) ho boloka le ho tsoa ho khutlela sebopeho sa "Quick settings".
7.7.1.4 “Morero” Beha sehlooho
Tobetsa konopo ea or konopo (<0.5S) ho khetha "Theme" eo u e batlang, 'me u tobetse hakhutšoanyane konopo ea ho boloka khetho.
7.7.1.5 "Mefuta" Beha mekhoa e thusang matla
Tobetsa konopo ea or konopo (<0.5S) ho kenya litlhophiso tsa "Modes", 'me u tobetse ka bokhuts'oane konopo ho khetha "4 Mekhoa" kapa "6 Mekhoa".
7.7.1.6 “Trip reset” Seta botjha leeto le le leng
Tobetsa konopo ea or konopo (<0.5S) ho kenya "Trip reset", 'me u tobetse ka bokhuts'oane konopo ho khetha "YES" kapa "NO".
7.7.2 Sehokelo sa “Display settings”
Ha o le ho "Quick settings", tobetsa ka bokhuts'oanyane kapa konopo (<0.5S) ho khetha "OTHERS" ebe o kenya
Sebopeho sa "Display settings".
7.7.2.1 “Trip reset” Seta botjha leeto le le leng
Tobetsa konopo ea or konopo (<0.5S) ho khetha ntho ea "Trip reset", ebe o tobetsa hakhutšoanyane konopo ea ho kenya ntho. Ebe u khetha "YES"/"NO" ("YES"- ho hlakola, "NO"-no opereishene) ka or konopo ebe o tobetsa konopo ea konopo (<0.5S) ho boloka le ho tsoa ho "Display settings" interface.
Hlokomela: Nako ea ho palama (Nako), lebelo le tloaelehileng (AVG) le lebelo le phahameng (MAX) li tla khutlisoa ka nako e le 'ngoe ha u seta TRIP bocha.
7.7.2.2 “Uniti” Kgetha yuniti ya maele
Tobetsa konopo ea or konopo (<0.5S) ho khetha ntho ea "Unit", ebe o tobetsa hakhutšoanyane konopo ea ho kenya ntho. Ebe u khetha "km"/"mile" ka or konopo ebe o tobetsa konopo ea konopo (<0.5S) ho boloka le ho tsoa ho "Display settings" interface.
7.7.2.3 “Keletso ya tshebeletso” Seta keletso ya tshebeletso
Tobetsa konopo ea orkonopo (<0.5S) ho khetha ntho ea "Tšebeletso", 'me u tobetse ka bokhutšoanyane konopo ho kenya ntho. Ebe u khetha "ON"/"OFF" ka ho or konopo ebe o tobetsa konopo ea konopo (<0.5S) ho boloka le ho tsoa ho "Display settings" interface.
Hlokomela: Litlhophiso tsa kamehla li TIMA. Haeba ODO e feta lik'hilomithara tse 5000, pontšo ea "Tip Tip" e tla benya.
7.7.2.4 "AL Sensitivity" Seta kutloisiso ea leseli
Tobetsa konopo ea or konopo (<0.5S) ho khetha ntho ea "AL sensitivity", ebe o tobetsa konopo ka bokhuts'oane konopo ho kenya ntho. Ebe u khetha boemo ba kutloisiso ea leseli e le "OFF"/"1"/ "2"/"3"/"4"/"5" ka or konopo ebe o tobetsa konopo ea konopo (<0.5S) ho boloka le ho tsoa ho "Display settings" interface.
Hlokomela: "OFF" e bolela hore sensor ea leseli e timme. Boemo ba 1 ke bofokoli bo fokolang ka ho fetisisa 'me boemo ba 5 ke boikutlo bo matla ka ho fetisisa.
7.7.2.5 "Boot Password" Beha password ea boot
Tobetsa konopo ea or konopo (<0.5S) ho khetha ntho ea "Boot Password", ebe o tobetsa konopo hakhutšoanyane ho kenya ntho eo. Ebe u khetha nomoro ea linomoro tse 4 e le “0”/ “1”/“2”/“3”/“4”/“5”/“6”/“7”/“8”/“9” ka or konopo. Ka mor'a ho beha, khetha "YES" ka ho tobetsa ka bokhutšoanyane konopo konopo (<0.5S) ho boloka le ho tsoa ho "Display settings" interface.
Ka mor'a hore u khutlele ho "Display Settings" segokanyimmediamentsi sa sebolokigolo, khetha ka bokhutšoanyane "ON"/"OFF" le or konopo ebe o tobetsa konopo ea konopo (<0.5S) ho boloka le ho tsoa ho "Display settings" interface.
Hlokomela: Phasewete ya kamehla ke 0000, mme maemo a kamehla a TIMA.
7.7.2.6 "Reset Password" Khutlisa password ea boot
Tobetsa konopo ea or konopo (<0.5S) ho khetha ntho ea "Reset Password", 'me u tobetse ka bokhutšoanyane konopo ho kenya ntho. Kenya phasewete ea khale ea linomoro tse 4 le or konopo, ebe u kenya phasewete e ncha ebe u netefatsa phasewete e ncha. Ka mor'a ho beha, khetha "YES" ka ho tobetsa ka bokhutšoanyane konopo konopo (<0.5S) ho boloka le ho tsoa ho "Display settings" interface.
7.7.3 Sehokelo sa “Boitsebiso”
Hlokomela: Lintlha tsohle mona li ke ke tsa fetoloa, e tlameha ho ba joalo viewed feela.
7.7.3.1 "Boholo ba mabili"
Ka mor'a ho kena leqepheng la "Information", u ka bona "Wheel size -inch" ka ho toba.
7.7.3.2 "Moeli oa lebelo"
Ka mor'a ho kenya leqephe la "Lintlha", u ka bona "Moeli oa lebelo -km / h" ka ho toba.
7.7.3.3 "Boitsebiso ba betri"
Tobetsa konopo ea or konopo (<0.5S) ho khetha "Boitsebiso ba Battery", 'me u tobetse ka bokhutšoanyane konopo ho kenya, ebe o tobetsa konopo ea or konopo ho view lintlha tsa betri.
Hlokomela: Haeba betri e se na tšebetso ea puisano, u ke ke ua bona data efe kapa efe e tsoang ho betri.
7.7.3.4 "Lintlha tsa molaoli"
Tobetsa konopo ea or konopo (<0.5S) ho khetha "Introller info", ebe o tobetsa ka bokhuts'oane konopo ho view mofuta oa hardware le mofuta oa software.
Tobetsa ea konopo (<0.5S) hape ho tsoa ho khutlela sebopeho sa "Information".
7.7.3.5 "Lintlha tsa HMI"
Tobetsa konopo ea or konopo (<0.5S) ho khetha "HMI info", 'me ka bokhutšoanyane tobetsa ea konopo ho view mofuta oa hardware le mofuta oa software.
Tobetsa ea konopo (<0.5S) hape ho tsoa ho khutlela sebopeho sa "Information".
7.7.3.6 "Lintlha tsa sensor"
Tobetsa konopo ea or konopo (<0.5S) ho khetha "Lintlha tsa Sensor", ebe o tobetsa konopo ea nakoana konopo ho view mofuta oa hardware le mofuta oa software.
Tobetsa ea konopo (<0.5S) hape ho tsoa ho khutlela sebopeho sa "Information".
HLOKOMELA: Haeba e-baesekele ea hau e se na sensor ea torque, "-" e tla hlahisoa.
7.7.3.7 "Warn code"
Tobetsa konopo ea or konopo (<0.5S) ho khetha "Warn code", 'me ka bokhutšoanyane tobetsa ea konopo ho view molaetsa wa khoutu ya temoso.
Tobetsa ea konopo (<0.5S) hape ho tsoa ho khutlela sebopeho sa "Information".
7.7.3.8 "Khoutu ea phoso"
Tobetsa konopo ea or konopo (<0.5S) ho khetha "Khoutu ea phoso", ebe o tobetsa konopo ea bokhuts'oane konopo ho view molaetsa oa khoutu ea phoso.
Tobetsa ea konopo (<0.5S) hape ho tsoa ho khutlela sebopeho sa "Information".
7.7.4 Sehokelo sa “Puo”
Ha u le sebopeho sa "Language", tobetsa ka bokhuts'oane or konopo (<0.5S) ho khetha puo e lakatsehang e le “English”/”Deutsch”/”Nederland’s”/”François”/”Italian”/”Sestina” ebe o tobetsa konopo hakhutšoanyane ho boloka khetho.
7.7.5 Sehokelo sa “Theme”
Ha u le sebopeho sa "Theme", tobetsa ka bokhutšoane or konopo (<0.5S) ho khetha sehlooho se lakatsehang e le "Sporty"/"Technology"/"Fashion" ebe o tobetsa konopo konopo ho boloka khetho.
PHOSO TLHALOSO
Likarolo tsa sistimi ea ebike li beoa leihlo ka nako ea nnete. Haeba karolo e sa tloaeleha, khoutu ea phoso e tsamaellanang e hlaha ho HMI. DP C010.CB e bonts'a khoutu ea phoso ho HMI ka kotloloho.
Mekhoa ea ho rarolla mathata lethathamong e thathamisitsoe ka tatellano ho latela monyetla oa phoso le ts'ebetso ea likarolo tse amanang. Ha e le hantle, barekisi ba ka fetola tatellano ho latela lisebelisoa tse teng le likarolo tse ling. (Bakeng sa mehato e qaqileng ea ho qhaqholla, ka kopo sheba bukana ea morekisi ea likarolo tse tsamaellanang le ofisiri websebaka.www.bafang-e.com>)
E le ho sireletsa likarolo tsa motlakase, pele u qhaqha likarolo, ka kopo tima matla a tsamaiso pele ka ho hatella yuniti ea taolo ea HMI ebe u khaola thapo ea matla ea karolo e qhaqhotsoeng. Ha u kenya likarolo, ka kopo, lokisa likarolo pele, ebe u hokahanya thapo ea matla ea likarolo, 'me qetellong u fetole matla a tsamaiso ka ho hatella yuniti ea taolo ea HMI.
Ka kopo, ikopanye le basebeletsi ba Bafang kamora thekisoservice@bafang-e.com> haeba bothata bo ka holimo bo hlōleha ho rarolla bothata kapa khoutu ea phoso ha e eo lethathamong le ka holimo.
| Khoutu | Lebaka | Ho batle phoso | |
| Hub Motor System | Sistimi ea Mid Motor | ||
| 5 | Throttle eseng sebakeng | 1. Hlahloba hore na throttle e teng. 2. Hlahloba hore na mohala oa throttle o kopantsoe ka nepo kapa mohala (ho tloha ho throttle ho ea ho molaoli) o senyehile. 3. Rarolla karolo e fosahetseng: 1) Kenya sebaka sa throttle 2) Kenya sebaka sa molaoli |
1. Hlahloba hore na throttle e teng. 2. Sheba hore na mohala oa throttle o teng e hokahane hantle kapa thapo (ho tloha throttle to drive unit) e senyehile. 3. Rarolla karolo e fosahetseng: 1) Kenya sebaka sa throttle 2) Kenya sebaka sa drive unit |
| 7 | Tsamaiso e feteletsengtage tshireletso | 1. Hlahloba hore na lentsoe la lebitsotage ea betri e tšoana le molaoli. 2. Rarolla karolo e fosahetseng: 1) Tlosa betri 2) Kenya sebaka sa molaoli |
1. Hlahloba hore na lentsoe la lebitsotage ea betri e tšoana le yuniti ea drive. 2. Rarolla karolo e fosahetseng: 1) Tlosa betri 2) Kenya sebaka sa drive unit |
| 8 | Letšoao la holo ka koloing ke e sa tloaelehang |
1. Hlahloba hore na thapo ea enjene e teng e hokahane hantle kapa thapo (ho tloha motor to controller) e senyehile. 2. Rarolla karolo e fosahetseng: 1) Beha enjene sebaka 2) Kenya sebaka sa molaoli |
Fetola yuniti ea koloi |
| 9 | Phase terata e sa tloaelehang enjeneng | 1. Hlahloba hore na thapo ea enjene e teng e hokahane hantle kapa thapo (ho tloha motor to controller) e senyehile. 2. Rarolla karolo e fosahetseng: 1) Beha enjene sebaka 2) Kenya sebaka sa molaoli |
Fetola yuniti ea koloi |
| 10 | Mocheso o feteletseng oa koloi tshireletso (E etsahala feela nakong eo enjene e na le lisebelisoa sensor ea mocheso.) |
1. Haeba u palame nako e telele, tima tsamaiso mme o tlohelle enjene hore e pholile. 2. Haeba ho se na koloi kapa ho palama ka nakoana, rarolla karolo e fosahetseng: 1) Beha enjene sebaka 2) Kenya sebaka sa molaoli |
1. Haeba u palame nako e telele, tima tsamaiso 'me u lumelle mochine oa koloi hore o phomole. 2. Haeba ho se na ho palama kapa ho palama ka nakoana nako, nkela sebaka sa drive. |
| 11 | Sensor ea mocheso oa koloi e sa tloaeleha (E etsahala feela ha enjene e na le sensor ea mocheso.) | 1. Hlahloba hore na thapo ea motlakase e hokahane ka nepo kapa thapo (ho tloha ho enjene ho ea ho molaoli) e senyehile. 2. Rarolla karolo e fosahetseng: 1) Beha enjene sebaka 2) Kenya sebaka sa molaoli |
Fetola yuniti ea koloi |
| 12 | Controller curent sensor e sa tloaelehang | Kenya sebaka sa molaoli | Fetola yuniti ea koloi |
| 14 | Molaoli tšireletso ea mocheso o feteletseng | 1. Haeba u palame nako e telele, tima tsamaiso 'me u lumelle molaoli hore a pholile fatshe. 2. Haeba ho se na koloi kapa ho palama ka nakoana, fetola molaoli. |
1. Haeba u palame nako e telele, tima Sistimi mme o tlohelle yuniti ea drive hore e pholile fatshe. 2. Haeba ho se na koloi kapa ho palama ka nakoana, nkela sebaka sa drive unit. |
| 15 | Sensor ea mocheso ea taolo e sa tloaeleha | Kenya sebaka sa molaoli | Fetola yuniti ea koloi |
| 21 | Kutlo ea lebelo e sa tloaeleha | 1. Hlahloba hore na thapo ea motlakase e hokahane ka nepo kapa thapo (ho tloha ho enjene ho ea ho molaoli) e senyehile. 2. Rarolla karolo e fosahetseng: 1) Beha enjene sebaka 2) Kenya sebaka sa molaoli |
1. Lekola hore na makenete o bua e wele kapa ho hlaka pakeng tsa makenete a buuoang le kutlo ea lebelo e ka har'a mefuta e tloaelehileng (10-15mm). 2. Hlahloba hore na thapo ea sensor ea lebelo e hokahane ka nepo kapa mohala (ho tloha ho sensor ho ea ho drive unit) e senyehile. 3. Rarolla karolo e fosahetseng: 1) Kenya sebaka sa sensor ea lebelo 2) Kenya sebaka sa drive unit |
| 26 | Torque sensor e sa tloaelehang (E etsahala feela ha sistimi ea drive e na le sensor ea torque.) | 1. Sheba hore na mohala oa sensor oa torque o hokahane ka nepo kapa mohala (ho tloha ho sensor ho ea ho molaoli) o senyehile. 2. Rarolla karolo e fosahetseng: 1) Kenya sebaka sa sensor ea torque 2) Kenya sebaka sa molaoli |
Fetola yuniti ea koloi |
| 30 | Puisano e sa tloaeleha | 1. Hlahloba hore na thapo ea HMI e teng e hokahane hantle kapa thapo (ho tloha HMI to controller) e senyehile. 2. Rarolla karolo e fosahetseng: 1) Kenya sebaka sa molaoli haeba HMI e itima ka ho iketsa ka mora ho hlaha khoutu ea phoso bakeng sa metsotsoana e 20. 2) Kenya sebaka sa HMI haeba HMI e sa itime ka bo eona ka mor'a hore ho hlahe khoutu ea phoso ka metsotsoana e 20. 3) Haeba sesebelisoa sa BESST se fumaneha, se kopanye le HMI le molaoli, bala boitsebiso ba HMI le molaoli 'me u nke sebaka sa karolo e sa khoneng ho bala boitsebiso. |
1. Hlahloba hore na thapo ea HMI e hokahane ka nepo kapa thapo (ho tloha ho HMI ho ea ho yuniti ea koloi) e senyehile. 2. Rarolla karolo e fosahetseng: 1) Kenya sebaka sa yuniti ea koloi haeba HMI e tima ka bo eona kamora ho hlaha khoutu ea phoso bakeng sa metsotsoana e 20. 2) Kenya sebaka sa HMI haeba HMI e sa itime ka bo eona ka mor'a hore ho hlahe khoutu ea phoso ka metsotsoana e 20. 3) Haeba sesebelisoa sa BESST se fumaneha, se kopanye le HMI le drive unit, bala nformation ea HMI le drive unit ebe u nkela karolo e sa khoneng ho bala tlhahisoleseling. |
| 36 | ON/OFF Button discovery circuit e sa tloaeleha (E etsahala feela ha mochini oa drive o kentsoe ka protocol ea puisano ea Bafang CAN.) | 1. Haeba u lula u tobetsa konopo ea ON/OFF ha HMI e bula, khoutu ea phoso e tla lla. Tlosa konopo 'me u shebe hore na khoutu e nyamela. 2. Rarolla karolo e fosahetseng: 1) Kenya sebaka sa HMI 2) Kenya sebaka sa molaoli |
1. Haeba u lula u tobetsa konopo ea ON/OFF ha HMI e bula, khoutu ea phoso e tla lla. Tlosa konopo 'me u shebe hore na khoutu e nyamela. 2. Rarolla karolo e fosahetseng: 1) Kenya sebaka sa HMI 2) Kenya sebaka sa drive unit |
| 37 | WDT (Watch Dog Timer) ho molaoli ha a tloaeleha |
Kenya sebaka sa molaoli | Fetola yuniti ea koloi |
| 42 | Ts'ebetso voltagPakete ea betri e tlase haholo | 1. Hlahisa betri 2. Tlosa betri |
|
| 49 | Ts'ebetso voltagE ea sele e le 'ngoe e tlase haholo |
1. Hlahisa betri 2. Tlosa betri |
|
| 4C | Moqtage phapang pakeng tsa sele e le 'ngoe | Tlosa betri | |
Likhoutu tsa phoso ea betri ea 42, 49, 4C li etsahala feela ha sistimi ea koloi e kentsoe bohlale BMS le Bafang CAN protocol protocol.
Litokomane / Lisebelisoa
 |
BAFANG DP C010.CB Display LCD [pdf] Bukana ea Mosebelisi DP C010.CB Pontšo LCD, DP C010.CB, Bontša LCD, LCD |
 |
BAFANG DP C010.CB Display LCD [pdf] Bukana ea Mosebelisi DP C010.CB Pontšo LCD, DP C010.CB, Bontša LCD, LCD |
 |
BAFANG DP C010.CB Display LCD [pdf] Buka ea Taelo C010, DP C010.CB Display LCD, DP C010.CB, Display LCD, LCD |
