Avrtx R1-2023 Radio Network Link Controller

Litlhaloso tsa Sehlahisoa

• Mohlala: R1-2023
• Mofuta: 1.02
• Likaroloana: GPIO Detect COS le CTCSS input, optocouplers le ho itšehla thajana bakeng sa ho fokotsa lerata la tšitiso ea Matla / RF, kesi e feletseng ea tšepe bakeng sa tšitiso ea tšireletso, matšoao a boemo ba LED.
• Lisebelisoa: AllstarLinkECHOLINK, ZELLO, SSTV, psk31, SKYPE, QT, YY, le li-intercom tse ling le software ea phetisetso ea data.

Litaelo tsa Tšebeliso ea Sehlahisoa

Molao-motheo oa ho Laola

Molaoli oa R1 o thusa likhokahano tsa marang-rang a seea-le-moea ka ho lemoha tlhahiso ea molumo ho tsoa ho PTT ea seea-le-moea le ho e fetisa marang-rang. E boetse e amohela audio ho tsoa marang-rang ebe e e fetisetsa seea-le-moeeng.

Lisebelisoa tsa taolo

Ka ho sebelisa R1 controller, u ka theha lihokelo tsa seea-le-moea kapa lihokelo tsa relay ho atolosa mefuta-futa ea li-transceiver kapa li-re-peater, ho nolofalletsa lihokelo tsa radio lefatšeng ka bophara.

Tšehetso ea Software

Sehlahisoa sena se ts'ehetsa lits'ebetso tse fapaneng tsa software ho kenyelletsa AllstarLinkECHOLINK, ZELLO, SSTV, psk31, SKYPE, QT, YY, le tse ling molemong oa puisano ea lentsoe, phetisetso ea data le intercom.

Khokahano ea Radio kantle

Selaoli sa R1 se ka hokeloa liea-le-moeeng ka ho sebelisa liboto tse fapaneng tsa converter tse ipapisitseng le sebopeho sa seteishene sa seea-le-moea. Netefatsa maemo a nepahetseng a switjha bakeng sa mefuta e fapaneng ya radio.

Mosebetsi oa AllStarLink

• Etsa bonnete ba hore o fetola switch ea ASL ho latela maemo a ts'ebeliso.
• Ha ASL e buletsoe, molaoli o lemoha COS/CTCSSS ebe o laola PTT bakeng sa likhokahano tsa AllStarLink.

DIN 6 Interface

Sebelisa thapo e loketseng le liboto tsa phetoho ho hokela R1 ho YAESU/Kenwood/ICOM radio kapa Motorola/MotoTRBO radio ka DIN 6 interface.

Khokahano ea USB

Molaoli oa R1 a ka hokeloa ho PC kapa Raspberry Pi a sebelisa USB bakeng sa sehokelo sa molumo, ho lemoha keyboard, le puisano ea koung ea serial e ipapisitseng le software e sebelisoang.

Lipotso Tse Botsoang Hangata

P: Na nka sebelisa molaoli oa R1 ka liea-le-moea ntle le YAESU/ICOM/KENWOOD kapa Motorola?

A: Ee, o ka sebelisa selaoli sa R1 se nang le liea-le-moea tse nang le likhokahano tse fapaneng ka ho sebelisa liboto tse nepahetseng tsa converter le ho netefatsa maemo a nepahetseng a switjha.

P: Ke tseba joang haeba tšebetso ea AllStarLink e kentsoe tšebetsong?

A: Maemo a switjha a ASL a etsa qeto ea hore na AllStarLink e lumelletsoe.
Etsa bonnete ba hore switch e maemong a nepahetseng ho latela litlhoko tsa khokahano ea hau.

Likarolo tsa sehlahisoa li joalo ka tlase

1. Chip ea karete ea molumo ea USB e hahelletsoeng ka har'a, e nang le tlhahiso ea boleng bo holimo ea molumo.
2. Sesebelisoa sa serial sa USB se hahiloeng ka hare. Mohlala, ho qala taolo ka RTS, amohela taolo ka DSR. (Mosebelisi oa ECHOLINK)
3. Thepa e hahelletsoeng ka har'a chip e laolang konopo ea PTT ea seea-le-moea 'me e ntša molumo ho libui ka selaoli sa radio-compute. (Mosebelisi oa ZELLO)
4. Software ea taolo e fetisetsa lentsoe le kenang la maekrofono ka ho lemoha lets'oao la seea-le-moea sa SQL ho tsoa ho USB chip (ZELLO User)
5. USB-Radio Interface e tsamaisana le AllstarLink.
   • GPIO Fumana tlhahiso ea COS le CTCSS. GPIO e hlahisa le ho laola PTT (ts'ebetso ea karete ea molumo ea ASL).
6. Khomphutha ea mosebelisi e ke ke ea fumana lerata la tšitiso ea Power/RF ho tsoa phepelong ea motlakase ho tsoa seea-le-moeeng hobane R1 e na le li-optocouplers le transformer e itšehlang thajana.
7. R1 e hlahisa sekontiri sa motlakase kapa potoloho (inductance) ho arola tšitiso ea Motlakase/RF le mahlaseli a maqhubu a phahameng.
8. Full Metal case e sireletsa litšitiso tse ling kaofela.
9. Moralo oa indasteri o nang le ts'ebetso e tloaelehileng ea tlhahiso.
10. Matšoao a boemo ba LED.

Molao-motheo oa ho Laola

• Ka kakaretso, software ea Internet chat chat, ka thuso ea se laolang molumo oa molumo e lemoha tlhahiso ea molumo ho tsoa ho radio PTT, kahoo molumo o tla fetisa.
• Ka lehlakoreng le leng, hang ha seea-le-moea se amohela molumo, molaoli o lemoha letšoao la SQL ka marang-rang a taolo ea USB, 'me software ea puisano ea lentsoe e tla fetisetsa molumo ho seea-le-moea. Ka tsela ena, e tla ba marang-rang a amanang le seea-le-moea.

Lisebelisoa tsa taolo

Ka ho fumana sehokelo sa seea-le-moea sa marang-rang, u ka theha lihokelo tsa seea-le-moea kapa lihokelo tsa relay le ho holisa transceiver ea radio kapa e pheta-phetoang, kahoo sehokelo sa radio sa lefats'e se a fihlelleha.

Software eo sehlahisoa sena se e tšehetsang ke.

• AllstarLink, ECHOLINK, ZELLO, SSTV, psk31, SKYPE, QT, YY, le li-intercom tse ling le software ea phetisetso ea data.
• Lintlha: Ho na le li-software tse sa tšehetseng USB le taolo ea ho lemoha, ka hona, ka nako ena, ha re ntse re le ka har'a komporo ea microphone, re ka sebelisa ts'ebetso ea software ea VOX.

Setšoantšo sa tšebetso ea motherboard

R1-2020 le R1-2023 tse hokahaneng le Radio

Tlhaloso ea tšebetso ea skrine ea kantle ea R1

Tlhaloso ea ts'ebetso ea skrine ea kantle ea R1 e nang le mongolo oa laser

• TX: RED” le “RX: B/G ke matšoao a boemo ba LED.
• Ha R1 e laola seea-le-moea sa kantle, R1 e khantša bofubelu.
• Ha seea-le-moea sa kantle se amohela lets'oao, khanya e putsoa ea R1 kapa leseli le letala.

Fetola boemo-MOTO:

• Hokela boto ea converter ea 6-pin ho 16-pin, e sebelisoang ke liteishene tsa seea-le-moea tsa Motorola (16-pin interface), (Lisebelisoa tsa kamehla) Hokela boto ea converter ea 6-pin ho 26, e sebelisoang ke liteishene tsa seea-le-moea tsa Motorola (26-pin interface) (Lisebelisoa tsa boikhethelo)

Fetola boemo -Y, K, I:

• Khokahano e tobileng, YAESU, Kenwood, ICOM … Tšebeliso ea seea-le-moea (lipini tse 6 kapa segokanyimmediamentsi sa 10 sa TNC)

Fetosa boemo-ASL TIMA:

• AllStarLink e holofetse, chip ea karete ea molumo ea USB e emisa ho bona COS / CTCSS le ho laola PTT.

Fetosa boemo -ASL ON:

• AllStarLink e lumelletsoe, chip ea karete ea molumo ea USB e lemoha COS / CTCSS ebe e laola PTT.
• Tlhokomeliso 2: "ASL ON", Sebelisa AllStarLink feela ho hokela le Raspberry Pi.
• Linaheng tse ling, boemo ba switjha bo tlameha ho ba ho ASL OFF !!!

DIN 6 Interface:

• Sebelisa Cable ea 6-pin.R1 ho hokahanya YAESU / Kenwood / ICOM-radio;
• Sebelisa thapo ea 6-pin le "6-pin-16 pin conversion board". R1 e hokela Motorola radio;
• Sebelisa thapo ea 6-pin le "6-pin-26 pin conversion board". R1 hokela MotoTRBO-radio;

USB Audio:

• USB-Radio Interface, Hokela ho PC kapa Raspberry Pi;

Ho fumanoa ha USB:

• Ho lemoha keyboard ea USB F7, hokela ho PC ha o sebelisa ZELLO kapa YY…;

Boema-kepe ba USB:

• Kou ea serial ea USB, e hokela ho PC ha e sebelisa ECHOLINK / PSK31 / SSTV ...;

R1 Link YAESU/ ICOM/ KENWOOD Radio Tlhaloso

• Hlokomela: Pele u reka R1 ho hokela YKI, pele u netefatsa litlhokahalo tsa boemo: TNC data port squelch level: e phahameng (e butsoitseng), sekhahla sa maemo a menu: 1200BPS. Sebaka sa ho fetola:Y/ K/ I
• Mohala o kopanyang oa 6-pin-6-pin o hoketsoeng mochining o lekantsoe ke matla a kahare a SQL a ho khanna a radio. E kenyelletsa empa ha e felle feela ho mehlala e latelang bakeng sa tšebeliso ea khokahanyo:

YAESU: FT-7800, FT-7900

• Ka Hlakola 2023. Lisebelisuoa tse entsoeng ka letsoho tsa 6-needle version e ntlafalitsoeng, nomoro ea nakoana: 6P-6P-plus, ho kenyelletsa empa e sa felle feela ho mefuta e latelang bakeng sa tšebeliso ea khokahanyo:
• ICOM: IC-207H, IC-208H，IC-2720H, IC-2820H
• YAESU: FT-8800、FT-8900、FT-817、FT-818、FT-847、FT-857、FT-897、 FT-991
• KENWOOD: TM-V7A,TM-V71,TM-D700,TM-D710, TM-255,TM-455,TM-733,TM-G707
• Hlokomela: Mohala o mofubelu o hoketsoe ho motlakase oa seea-le-moea + 13.8V.
• Ka Pherekhong 2023, lisebelisoa tse ntlafalitsoeng tsa likhoele tse 6, nomoro e lekantsoeng: 6P-10P conversion board, 6P-10P conversion board series accessories 6P-6P- plus cable. Ho kenyelletsa empa ho sa felle feela ho mefuta e latelang bakeng sa tšebeliso ea khokahanyo:
• YAESU: FTM-100, FTM-200, FTM-300, FTM-400,FTM-6000 6P-10P letoto la lihlooho tsa lisebelisoa 6P-6P- plus cable Tlhaloso:
• Se latelang ke setšoantšo sa R1 se hoketsoeng ho FTM-400: ( R 1 Fetola boemo: Y/ K/ I )

YAESU FTM-400 "DATA" ea litlhophiso tsa menu:

• Hlokomela: Phetiso ea data ea boema-kepe ba TNC ea FTM-400 e nolofalloa ka ho sa feleng. E emisoa ke "SQL" taolo ea boemo ba lets'oao le hlahisoang ke liphanele "A" le "B" li amohela maqhubu.
• Ka hona, boemo ba SQL ba ho amohela "A" le "B" bo lokela ho hlophisoa ho khetha "High Threshold". Haeba boemo ba SQL bo behiloe tlase haholo, ho amohela SQL ho buloa ka lebaka la ho kena-kenana le mahlaseli a kotsi, e leng se ka etsang hore phetisetso ea data ea port e koetsoe.

Khokahano ea R1 DIY ho liteishene tse ling tsa radio

• PCB e tšehetsa letsatsi la DIY Mots'eanong 23, 2020, liphetolelo tsohle tsa nako e tlang li tšehetsa DIY
• 6-pin to 26-pin conversion board (e hokahaneng le sesebediswa sa phini sa motoTRBO-26).

Ka tlase ke khokahano ea 'mele ea XPR4550

Litlhophiso tsa Terminal tsa lisebelisoa ka CPS:

• Mofuta oa molumo oa RX: Squelch e Hlophisitsoeng
• Pin #17: Boemo ba Ts'ebetso ea Ext Mic PTT: Tlase (O hloka ho khetha "Enable")
• Pin #21: PL/Talkgroup Fumana Boemo ba Bohato: Tlase (U hloka ho khetha "Enable") 6-pin to 26-pin conversion board" e ts'ehetsa boholo ba liea-le-moea tsa mobile tsa Motorola tse nang le sehokelo sa li-pin tse 26 ho kenyelletsa empa li sa felle feela mefuteng e ka tlase:
• Sehlopha sa XPR : XPR4300, XPR4350, XPR4380, XPR4500, XPR4550, XPR4580, XPR5350, XPR5550, XPR8300
• Letoto la XiR: XiRM8200, XiRM8220, XiRM8228, XiRM8620, XiRM8628, XiRM8660, XiRM8668, XIR-R8200 (teko ea 2023 e fetile, sekepe sa Accessory se tšehetsa mokhoa oa analog feela)
• DGM Letoto : DGM4100, DGM5000,DGM5500,DGM6100,DGM8000,DGM8500
• DM Series: DM3400, DM3401, DM3600, DM3601, DM4400, DM4401, DM4600, DM4601
• Tlhokomeliso 4: Ha ho na tiiso ea hore liphetolelo tsohle li ka sebelisoa ka mokhoa o tloaelehileng, ka kopo etsa bonnete ba hore mofuta oa seea-le-moea o lumellana le sebaka sa heno.
• Ka tlase ke setšoantšo sa boto ea phetoho ea li-pin tse 6 ho isa ho tse 16 (sesebelisoa se tla hokahanngoa le phini ea Motorola-16).

Boto e kaholimo ea 6-pin ho isa ho 16-pin, ke ea Motorola radio le ho sebelisa khokahano ho GM300, SM50, SM120, GM338, GM339, GM398, GM3188, GM3688, GM950I, CDM-750, CDM-1250, CDM -1550, GM140, GM160, GM340 GM350, GM360, GM380, GM640, GM660, GM1280, CM140, CM160, CM200, CM300, CM340, CM360, PM400, M1225, 3100pro, 5100, 7100, XNUMX, XNUMXpro

Setting ea kamehla ea seea-le-moea

• PIN2=MIC INNP, PIN3=PTT，PIN7=GND， PIN8=SQL (Boemo ba Ketso : Tlase), PIN11=AF OUT

Boto ea phetoho ea li-pin tse 6 ho isa ho tse 16, tlhaloso ea pad ea PCB

• A, Khokahano ea PCB = 2 PIN MIC input (default setting PIN2 = MIC INPUT)， Che “A” ho qala ka May 2023
• B, Khokahano ea PCB = 5 PIN MIC input No “B” ho qala ka May 2023
• C, Khokahano ea PCB = hokela PIN ea 15 le PIN ea 16, sebuela-hare se kentsoeng sa RADIO = etsa hore molumo o tsoe; PCB ha e kopane = ha ho na molumo o tsoang ho sebui

Ho kenya Mokhanni

• Chip ea karete ea molumo ea USB: sistimi e sebetsang ea Windows e na le mokhanni o kopaneng; ka hona, ho kenya ha ho hlokahale.
• USB mouse middle key discovery chip: tsamaiso ea Windows e boetse e na le mokhanni o kopantsoeng; ka hona, ho kenya mokhanni ha ho hlokahale.
• Empa o hloka ho kenya mokhanni oa serial oa USB, sehokelo sa ho jarolla se ka tlase: http://avrtx.cn/download/USB%20driver/CH340/CH340%20DRIVER.ZIP. http://www.wch-ic.com/search?t=all&q=CH340. CH341 Driver e lumellana

Litlhophiso tsa bohlokoa tsa microphone:

• Sebopeho sa tsamaiso ea molumo oa tsamaiso, u se ke ua khetha microphone ho ntlafatsa kapa AGC haeba u khetha khetho, molumo oa mokha o mong o tla ba lerata haholo le lerata.

Motorola CDM-1250 e hokahane

Motorola CDM-1250 e hokahane le tšebeliso ea R1-2020 le litlhophiso

Tlhaloso ea sehokelo sa CDM-1250.

Sebelisa" 6-pin to 16-pin conversion board” ho kenya sehokelo sa CDM-1250 1-16

CDM-1250 "CPS" tlhophiso ea mananeo:

ECHOLINK le MMSTV Connect ho sebelisa

ECHOLINK Beha litšupiso

• Khetha tlhahiso ea molumo le tlhahiso e le Sesebelisoa sa molumo oa USB pnp
• Kenya le tlhahiso ea molumo, ka kopo, beha sebopeho sa taolo ea molumo oa sistimi

Litlhophiso tsa bohlokoa tsa maekrofono

• Sebopeho sa tsamaiso ea molumo oa tsamaiso, u se ke ua khetha microphone ho ntlafatsa kapa AGC, haeba u khetha khetho, molumo oa mokha o mong o tla ba lerata haholo le lerata.
• Beha taolo ea ho amohela joalo ka Serial DSR
• Khetha: nomoro ea serial ea USB

Nomoro ea serial ea USB, bona mookameli oa hardware

• Beha taolo ea ho qala joalo ka serial port RTS
• Khetha: nomoro ea serial ea USB
• Tlhokomeliso 5: Mabapi le lebokose lena la lisebelisoa tsa R1, ka kopo tsebisoa hore ha PC e qala hape, e tla fetoha e sa tloaelehang. Ka kopo tima / tima motlakase oa radio pele, ebe o qala PC bocha.
• Lebaka la bothata bo ka holimo le amana le molao-motheo oa taolo ea ho khanna ea R1 le PC. Ha ho na tharollo bothateng bona.
• Bakeng sa lintlha tse ling, haeba taolo ea R1 e kopana le ntho e sa tloaelehang ka mor'a hore PC e tingoe, ka kopo seta "PC shutdown = USB no power supply" ho BIOS ea PC.

MMSTV Seta referense

Khetha RX MODE: AUTO

Khetha: Nomoro ea serial ea USB ea COM, Khetha Exclusive Lock le RTS Ha u ntse u Scan

Ka tlase ke khokahano e ka sebelisoang ho ZeLLO

"Reference reference" bakeng sa ZeLLO

• Beha molumo ho tse kentsoeng le ho tsoa ho USB PnP Sound Device (sistimi ea ts'ebetso ea lifensetere e se e na le mokhanni ea kopaneng)
• Litlhophiso tsa bohlokoa tsa maekrofono: Sebopeho sa tsamaiso ea molumo oa tsamaiso, u se ke ua khetha microphone ho ntlafatsa kapa AGC, haeba u khetha khetho, molumo oa mokha o mong o tla ba lerata haholo le lerata.

Khetha ho lemoha ha ZeLLO joalo ka ” keyboard F7

• U sebelisa li-setting tse tšoanang, u ka boela ua laola lisebelisoa tse ling tsa keyboard trigger, mohlalaample: ESChat…
• Hlokomela: Mofuta o mocha oa ZELLO o tšehetsa boleng bofe kapa bofe ba keyboard, 'me boleng ba keyboard ea ka hare ea R1-2023 ke "F7".
• Ka hona, ho ka khethoa feela "F7". Haeba o hloka litekanyetso tse ling tsa keyboard, o hloka ho fetola boleng ba keyboard ka har'a R1-2023.

AllstarLink Connect ho sebelisoa

Litlhophiso tsa Allstarlink le sesebelisoa sa seipone sa Raspberry Pi URL: https://allstarlink.org/https://hamvoip.org/allstarlinkr khoasolla setšoantšo: https://hamvoip.org/#download

Litlhophiso tse amanang le Hardware tsa R1 tsa sehokelo sa Allstar:

• latela feela maemo a ka tlase joalo ka a ka
• 'me u etse bonnete ba hore u na le toggle mona.
• Hlokomela: Ho fumana thuso ka ho hokela Allstarlink ho R1, ka kopo ikopanye le 9W2LWK, imeile: 9w2lwk@gmail.com

Khokahano e ka sebelisoang ho YY: ( YY e fumaneha feela ka mofuta oa Sechaena o Nolofalitsoeng)

• Seteisheneng sa YY, khetha tse peli tse kenyang maekerofounu le tlhahiso ea sebui ho "USB PnP Sound Device" sehokelong sa taolo ea molumo oa sistimi, ka kopo u se ke oa khetha ntlafatso ea maekrofono kapa AGC, haeba u khetha khetho, molumo oa mokha o mong o tla ba monate haholo. lerata le lerata
• Haeba u batla ho beha seea-le-moea sa ka ntle ho amohela molumo o rometsoeng ka marang-rang ho tloha ho e mong, khetha ho tobetsa mouse ho bua: konopo e bohareng (khetha ntlha e tala, ebe o tobetsa konopo e bohareng ea mouse).
• Phetiso ea radio ea kantle ke taolo ea kamehla ea kahare, ha e hloke ho seta.
• Keletso: Mosebetsi oa ho laola konopo ea mouse o bohareng o lokela ho bolokeloa software ea YY.
• Ho qoba likhokahano tsa marang-rang tse fetisoang hampe, lisebelisoa tse ling ha li khone ho fetana/ho sebelisa hape/ho hlakola konopo e bohareng ea mouse.
• Litlhahiso tse peli tsa ho qetela ke ho tima ts'ebetso ea potlakiso ea lentsoe. Sena ke ho qoba lintho tse bakang liphoso puisanong.

Lethathamo la lisebelisoa

R1 Lenane la boikhethelo la lisebelisoa

• Sephutheloana sa A16: R1 * 1PCS + thapo ya USB-D * 2PCS + thapo ya diphini tse 6 * 1PCS + 6-pin ho isa ho boto ya phetoho ya diphini tse 16 * 1PCS
• Sephutheloana sa A26: R1 * 1PCS + thapo ya USB-D * 2PCS + thapo ya diphini tse 6 * 1PCS + 6-pin ho isa ho boto ya phetoho ya diphini tse 26 * 1PCS
• Sephutheloana sa thekiso B10P: R1 * 1PCS + thapo ya USB-D * 2PCS + 6P-6P-plus thapo * 1PCS + 6P-10P boto ya phetoho * 1PCS
• HLOKOMELA: Lenane le latelang ha le rekisoe "packages *", e hlalosa feela tlatsetso ea CT-141cable ho R1 e ka hokahantsoeng le FTM-350.

Sephutheloana sa Thekiso

• Sephutheloana sa A16: R1 * 1PCS + thapo ya USB-D * 2PCS + thapo ya diphini tse 6 * 1PCS + 6-pin ho isa ho boto ya phetoho ya diphini tse 16 * 1PCS
• Sephutheloana sa A26: R1 * 1PCS + thapo ya USB-D * 2PCS + thapo ya diphini tse 6 * 1PCS + 6-pin ho isa ho boto ya phetoho ya diphini tse 26 * 1PCS
• sephutheloana sa B10P: R1 * 1PCS + thapo ya USB-D * 2PCS + 6P-6P-plus thapo * 1PCS + 6P-10P boto ya phetoho * 1PCS
• Download ka letsoho URL：http://avrtx.cn/
• Ikopanye le E-mail Oepopp@163.com
• Oepopp@gmail.com
• etsa BH7NOR (Lets'oao la khale la mohala: BI7NOR) Ho lokisa ka letsoho: 9W2LWK

Litokomane / Lisebelisoa

Avrtx R1-2023 Radio Network Link Controller [pdf] Bukana ea Mosebelisi R1-2023, R1-2023 Radio Network Link Controller, Radio Network Link Controller, Network Link Controller, Link Controller, Controller

Litšupiso

• Bukana ea Mosebelisi