AVIDEONE HW10S 10.1 Inch Touch Screen Camera Control Field Monitor User Guide

Litaelo tsa Bohlokoa tsa Tšireletso

Sesebediswa sena se lekotswe hore na se dumellana le melao le ditlhoko tsa polokeho, mme se netefaditswe bakeng sa tshebediso ya matjhaba. Leha ho le joalo,
joalo ka lisebelisoa tsohle tsa elektroniki, sesebelisoa se lokela ho sebelisoa ka hloko. Ka kopo bala le ho latela litaelo tsa polokeho ho itšireletsa kotsing e ka bang teng le ho fokotsa kotsi ea ts'enyo ea yuniti.

• Ka kopo, u se ke ua beha skrini fatše ho qoba ho hloa LCD.
• Ka kopo qoba tšusumetso e matla.
• Ka kopo u se ke ua sebelisa tharollo ea lik'hemik'hale ho hloekisa sehlahisoa sena. Hlakola ka lesela le holimo feela ho boloka bokaholimo bo hloekile.
• Ka kopo u se ke ua beha libaka tse sa lekaneng.
• Ka kopo u se ke ua boloka mochine o nang le lintho tse bohale, tsa tšepe.
• Ka kopo latela litaelo le ho rarolla mathata ho lokisa sehlahisoa.
• Litokiso kapa litokiso tsa ka hare li tlameha ho etsoa ke setsebi se tšoanelehang.
• Ka kopo, boloka tataiso ea mosebelisi bakeng sa tšebeliso ea nako e tlang.
• Ka kopo, ntša motlakase 'me u tlose betri haeba nako e telele e sa sebelisoe, kapa boemo ba leholimo ba lialuma.

Tšireletseho ea ho Lahla Lisebelisoa tsa Khale tsa Elektronike

Ka kopo se nke lisebelisoa tsa khale tsa elektroniki e le litšila tsa masepala 'me u se ke ua chesa lisebelisoa tsa khale tsa elektroniki. Ho e-na le hoo, ka kopo, latela melao ea lehae ka linako tsohle 'me u e fe sebaka se sebetsang sa pokello bakeng sa ho e sebelisa hape ka mokhoa o sireletsehileng. Netefatsa hore litšila tsena li ka lahloa le ho sebelisoa hape ho thibela tikoloho le malapa a rona litlamorao tse mpe.

Likarolo tse ka Sehloohong

Likaroloana

• Capacitive touch screen
• Taolo ea khamera
• 50000 h LED bophelo nako
• Tlhahiso ea HDMI 2.0 le tlhahiso ea loop
• Kenyelletso ea 3G-SDI le tlhahiso ea loop
• 1500 cd/㎡ Khanya e phahameng
• 100% BT.709
• HDR (High Dynamic Range) e tšehetsang HLG, ST 2084 300/1000/10000
• Khetho ea 3D-Lut ea tlhahiso ea mebala e kenyelletsa lits'oants'o tsa kh'amera tse 17 le lits'oants'o tse 6 tsa kh'amera
• Gamma adjustments (Off/1.8/2.0/2.2/2.35/2.4/2.6/2.8)
• Color Temperature (3200K/5500K/6500K/7500K/9300K/User)
• Li-Marker & Aspect Mat (Lesupa le Bohareng, Lesupa la Aspect, Lesupa la polokeho, Lesupa la mosebelisi)
• Lekola (Lefubelu, Botala, Botala, Mono)
• Mothusi (Waveform, boholo ba Vector, Peaking, Mmala o Fosahetseng, Ponahalo, Histogram)
• FN konopo ea tšebetso e hlalosoang ke mosebelisi

Tlhaloso ea Tlhahiso

Likonopo & Li-interfaces

1. Thepa Konopo:
   • Tobetsa hakhutšoanyane: Ho matlafatsa. Hape bakeng sa touch function switch on/off.
   • Tobetsa nako e telele: Ho tima motlakase.
2. Lesupa la Matla: Lebone la indicator le fetoha le letala ha le buletswe.
3. Konopo ea ho Kena: Fetola lets'oao lipakeng tsa SDI le HDMI.
4. Konopo ea FN: Konopo ea tšebetso e hlalosoang ke mosebelisi. Default e le ts'ebetso ea Peaking.
5. Leseli la leseli.
6. 1/4 inch screw mount: Bakeng sa Thaba ea Hotshoe
7. 1/4 inch screw mount: Bakeng sa Thaba ea Hotshoe
8. 1/4 inch screw mount: Bakeng sa Thaba ea Hotshoe
9. Kenyeletso ea 3G-SDI ea Letšoao.
10. 3G-SDI Letšoao la Loop Output
11. HDMI 2.0 Signal Input.
12. HDMI 2.0 Signal Loop Output.
13. USB: Bakeng sa mojaro oa 3D-LUT le ntlafatso ea firmware.
14. Kenyeletso ea Matla a DC 7-24V
15. Motlakase oa DC 8V
16. Boema-kepe ba LANC: Ho hokela thapo ya LANC bakeng sa taolo ya khamera.
17. Earphone Jack: 3.5mm sekotjana sa li-earphone.
18. Sebaka sa Betri: E lumellana le poleiti ea betri ea V-Lock.
19. Screw Mount 4pcs: Bakeng sa Thaba ea VESA.
20. Screw Mount 2pcs: Bakeng sa Battery slot

Menu Setting

Pele u seta lits'ebetso, ka kopo etsa bonnete ba hore sesebelisoa se hokahane ka nepo.

Shortcut Touch Gestures

• Swaepa ho ya hodimo kapa tlase bohareng: Kenya tshebetsong kapa o pate lenane.
  
• Swaepa ka ho le letshehadi hodimo kapa tlase: Ho fetola boemo ba lebone la morao.
  
• Swaepa ho ya hodimo kapa tlase ka ho le letona: Ho fetola boemo ba modumo.
  
• Swaepela ka ho le letshehadi kapa ho le letona: Kenya tshebetsong kapa o pate menu ya kgaoletso.
  
• Atometsa menoana e 'meli: Ha ho se menu, atametsa le ho atametsa setšoantšo, 'me u tšehetse setšoantšo se tsamaeang ha u atametsa.
  
• Tobetsa konopo ea Matla ka bokhuts'oane ho tima / ho bula tšebetso ea ho ama
  Ts'ebetso ea Menu
  Kenyeletso
  
  Khetho ea ho kenya: SDI/HDMI.
  Sebopeho sa maqhubu
  
• Sebopeho sa maqhubu
  • Ha e kentsoe, khetha e 'ngoe ea mekhoa ea waveform har'a [Multi], [Y], [YCbCr] le [RGB].
    [Tsa ngata]: Hlahisa waveform, histogram, vector, le meter ea boemo ka nako e le 'ngoe.
    [Y]: Hlahisa Y Waveform.
    [YCbCr]: Hlahisa CyBC Waveform.
    [RGB]: Hlahisa R/G/B Waveform
  • Fetola ponaletso ea waveform, histogram le level meter har'a [off] [25%] le [50%].
  • E timme: Semelo sa waveform / histogram / level meter se bonts'oa ho 100% e ntšo.
  • [25%]: Semelo sa waveform / histogram / level meter se bonts'oa ho 75% e ntšo.
  • [50%]: Semelo sa waveform / histogram / level meter se bonts'oa ho 50% e ntšo.
• Vector
  Sebelisa ntho ena ho kenya kapa ho tima Vector
• Histogram
  Sebelisa ntho ena ho kenya kapa ho tima histogram.
• Mokhoa o felletseng
  Ha e kentsoe, khetha mofuta o le mong oa waveform, Vector le Histogram ho tsoa har'a [Off], [Y], [YCbCr], [RGB], [Vector] le [Histogram].
  Ho hlora
  
  Sebedisa ntho ena ho kenya tshebetsong kapa ho tima tshebetso e phahameng. E sebelisoa ho thusa opareitara ea khamera ho fumana setšoantšo se bohale ka ho fetesisa.
  • Boemo bo phahameng: Fetola boemo ba tlhōrō ho tloha ho 1-100, kamehla ke 50. Boemo bo phahameng ba tlhōrō ke, phello e hlakileng haholoanyane ea ho phahama.
  • Mmala o Hlollang: Khetha 'mala oa mela e thusang ho tsepamisa maikutlo har'a [Bokhubelu], [Botala], [Boputsoa], le [Bosoeu].
    
    Kabo ea Leseli
    
• 'Mala oa Bohata
  Mosebetsi o emela maemo a ponahalo ea setšoantšo ka ho fetola mebala ea setšoantšo ka mebala e tloaelehileng.
  • Ha e kentsoe, [Default], [Spectrum], [ARRI] le [RED] ke tsa boikhethelo.
  • Lethathamo la 'Mala oa Bohata: Kenya tshebetsong kapa o tima tafole ya mebala e fosahetseng. Mefuta e fapaneng ea tafole ea mebala e fosahetseng e pakeng tsa 0-100 IRE.
    
• Kgahlamelo
  Karolo ea ho pepeseha e thusa mosebelisi ho fumana ponahalo e nepahetseng ka ho hlahisa mela e pota-potiloeng holim'a libaka tsa setšoantšo tse fetang boemo ba ho pepeseha ha litlhophiso.
  • Kenya tshebetsong kapa o tima tshebetso ya kgahlamelo.
  • Boemo ba Ponahalo: Fetola boemo ba ho pepeseha hara 0-100. Boleng ba kamehla ke 100.
    
    Tekanyetso ea Mmala
    
• Khamera LUT
  Ha o kentswe tshebetsong, kgetha mokgwa wa khamera e le nngwe ya LUT hara [Def. LUT] le [Mosebelisi LUT].
• Def. LUTHO
  Mefuta e 17 ea mefuta ea kamehla ea LUT ke ea boikhethelo:
  [SLog2ToLC-709], [SLog2ToLC-709TA], [Slog2ToSLog2-709], [SLog2ToCine+709], [SLog3ToLC-709], [SLog3ToLC-709TA], [SLog3ToSLog2-709], [SLog3ToSLog709], [709g3] CLog709-709G709, [SLog709ToSLog709], 7g709-780 709 ], [ArriLogCToPXNUMXDCI], [CLogToXNUMX], [VLogToVXNUMX], [JLogToXNUMX], [JLogToXNUMXHLG], [JLogToXNUMXPQ], [ZXNUMX NLogToXNUMX] le [DXNUMX NLogToXNUMX]
• Mosebelisi LUT
  Sebelisa ntho ena ho khetha mofuta o mong oa basebelisi ba LUT (1-6). Ka kopo kenya mosebelisi LUT joalo ka mehato e latelang:
  • Mosebedisi LUT o tlameha ho rehelwa ka .cube ka hara suffix
    Hlokomela! Sesebelisoa se tšehetsa feela file e nang le 17x17x17 / 33x33x33 le BGR bakeng sa sebopeho sa data le sebopeho sa Tafole. Haeba sebopeho se sa kopane le tlhokahalo, ka kopo sebelisa sesebelisoa "Lute Tool.exe" ho e fetola.
  • Ho reha mosebelisi LUT lebitso la User1-User6.cube, ebe u kopitsa mosebelisi LUT ho USB flash disk. Kenya USB flash disk ho sesebelisoa, mosebelisi LUT e bolokoa sesebelisoa ka bo eona ka lekhetlo la pele. Letšoao la matla le tla khanya nakong ea ho boloka mosebelisi LUT, ebe o emisa ho benya ha o bolokiloe ka botlalo.
    Haeba mosebelisi LUT a sa kengoa ka lekhetlo la pele, sesebelisoa se tla hlahisa molaetsa o potlakileng, ka kopo khetha ho ntlafatsa kapa che. Haeba ho se na molaetsa o potlakileng, ka kopo sheba sebopeho sa sistimi ea tokomane ea USB Flash disk kapa u e fome (Mofuta oa sistimi ea tokomane ke FAT32). Ebe u e leka hape.
    Hlokomela! Kamora ho boloka LUT ka USB flash disk, ka kopo qala sesebelisoa hape
• Gamma/HDR
• Gamma
  Sebelisa ntho ena ho khetha pontšo ea Gamma: [E tima], [1.8], [2.0], [2.2], [2.35], [2.4], [2.6] le [2.8].
• HDR
  Ha e kentsoe, ponts'o e hlahisa mefuta e mengata e fapaneng ea khanya, e lumellang lintlha tse bobebe le tse lefifi hore li hlahisoe ka mokhoa o hlakileng haholoanyane. Ka katleho ho ntlafatsa boleng ba setšoantšo ka kakaretso.
  Khetha e 'ngoe ea li-presets tsa HDR: [ST 2084 300], [ST 2084 1000], [ST 2084 10000] le [HLG].
  
• Sebaka sa Mmala
  Khetha papali ea papali ho tsoa ho [Native], [SMPTE-C], [Rec709] le [EBU].
• Tekanyetso
  • Khetha [E tima] kapa [Bula].
    Haeba sesebelisoa se hloka ho lekanngoa 'mala, ka kopo sebetsa ka tsela e latelang,
• Hokela sesebelisoa le PC ka sebopeho sa HDMI.
• Etsa bonnete ba hore sesebelisoa le lisebelisoa tsa ho lekanya mebala li sebetsa ho feta metsotso e 30.
• Kamora mohato o fetileng, kenya tšebetsong ts'ebetso ea Colour Calibration ea sesebelisoa le software ea calibration ea mebala ho lekanya 'mala (Sheba tokomane ea "CMS Color Calibration process" bakeng sa lintlha.
• E tla hlahisa tokomane "Rec709.cube" ka mor'a hore e hlahlojoe, ebe e kopitsa tokomane ena ho USB flash disk.
• Kenya USB flash disk ho sesebelisoa ebe u boloka tokomane. Tokomane ena "Rec709.cube" e tla fumanoa tlas'a Khetho ea Space Space.
• Papiso En
  Sebelisa tlhophiso ena ho kenya tšebetsong kapa ho tima tšebetso ea Comparison Eni. Ha e kentsoe, skrine e bonts'a papiso ea setšoantšo sa mantlha le setšoantšo se ikhethileng joalo ka ha ho bonts'itsoe.
  
  Khetho: [E Timile], [Gamma/HDR], [Sebaka sa Mebala], [Khamera LUT]. Ka mehla: [E timiloe].
  Lesupa
  
• Letšoao la Setsi
  Kgetha [Bula] ho hlahisa lesupa le bohareng “+” le [Tima] hore o se ke oa le hlahisa.
• Aspect Marker
  Kgetha karolo ya karolo ya lesupa: [E tima], [16:9], [1.85:1], [2.35:1], [2.39:1],[4:3], [3:2], [Gridi ]
• Letšoao la polokeho
  E sebelisetsoa ho khetha le ho laola boholo le ho fumaneha ha sebaka sa polokeho. Khetha boholo ba matšoao a polokeho: [95%], [93%], [90%], [88%], [85%], [80%] Hlokomela! Ha [Aspect Marker] e khethiloe e le [Grid], lesupa la polokeho le ke ke la hlahisoa.
• Mmala oa Lesupa
  Khetha 'mala oa lesupa le hlahang skrineng: [Botšo], [Bokhubelu], [Botala], [Boputsoa], le [Bosoeu]. Ka mehla: [E tšoeu]
• Aspect Mat
• Botenya: Fetola bophara ba mola oa lesupa le bohareng, lesupa la karolo le lesupa la polokeho har'a [1-15]. Boleng ba mohato ke 1. Boleng ba kamehla: 6.
• Aspect Mat.: E fifatsa sebaka sa bokantle ba Lesupa. Likhato tsa lefifi li tloha ho [0] ho ea ho [7]. Ka mehla: [E timiloe].
  
• Mosebelisi H1
  Fetola lesupa sebakeng sa matšoao a emeng ho tloha ho 1 ho isa ho 1920, boleng ba kamehla 1 (Boleng ba mohato ke 1 ).
• Mosebelisi H2
  Fetola lesupa sebakeng sa matšoao a emeng ho tloha ho 1 ho isa ho 1920, boleng ba kamehla 1920 (Boleng ba mohato ke 1).
• Mosebelisi V1
  Fetola lesupa sebakeng sa matšoao a rapameng ho tloha ho 1 ho isa ho 1080, boleng ba kamehla ke 1 (Boleng ba mohato ke 1).
• Mosebelisi V2 
  Fetola lesupa sebakeng sa matšoao a rapameng ho tloha ho 1 ho isa ho 1080, boleng ba kamehla ke 1080 (Boleng ba mohato ke 1).
  Hlokomela: Moetsi oa mosebelisi ka [Aspect Maker]- [Mosebelisi] o fumaneha feela
  Liphetoho tsa Parameter
  
• Khanya
  Laola tekanyo ea khanya pakeng tsa 0-100, boleng ba kamehla: 50.
• Bapisa
  Laola tekanyo ea phapang lipakeng tsa 0-100, boleng ba kamehla: 50.
• Phatlalatso
  Fetola matla a 'mala pakeng tsa 0-100, boleng ba kamehla: 50.
• Tint
  Fetola tint pakeng tsa 0-100, boleng ba kamehla: 50.
• bohale
  Laola bohale ba setšoantšo pakeng tsa 0-100, boleng ba kamehla: 0.
• Mobala Temp.
  Sebelisa ntho ena ho khetha e 'ngoe ea litlhophiso tsa mocheso oa mebala: [3200K], [5500K], [6500K], [7500K], [9300K], [Mosebelisi]. Kamehla: [6500K] Hlokomela! Ke feela ka tlas'a [Mosebelisi], R/G/B Gain le Offset e ka lokisoa.
• R Fumana
  Fetola R Gain ea mocheso oa 'mala oa hajoale ho tloha ho 0 ho isa ho 255. Boleng ba kamehla: 128.
• G Fumana
  Fetola Phaello ea G ea mocheso oa 'mala oa hajoale ho tloha ho 0 ho isa ho 255. Boleng ba kamehla:
• B Fumana
  Fetola Phaello ea B ea mocheso oa 'mala oa hajoale ho tloha ho 0 ho isa ho 255. Boleng ba kamehla: 128.
• R Offset
  Fetola R Offset ea mocheso oa 'mala oa hajoale ho tloha ho 0 ho isa ho 511. Boleng ba kamehla: 255.
• G Offset
  Fetola G Offset ea mocheso oa 'mala oa hajoale ho tloha ho 0 ho ea ho 511. Boleng ba kamehla: 255.
• B Offset
  Fetola B Offset ea mocheso oa 'mala oa hajoale ho tloha ho 0 ho isa ho 511. Boleng ba kamehla: 255.
  Pontšo
  
  
• Skena
  • Fetosa mokhoa oa ho skena har'a [Aspect], [Pixel To Pixel], le [Zoom].
    Hlokomela:
  • Ke feela ha ho khethiloe mokhoa oa [Aspect] tlas'a [Scan], matšoao a kenyelelitsoeng bohareng, lesupa le lesupa la polokeho li ka sebetsa.
  • Ke feela ha ho khethiloe mokhoa oa [Zoom], tekanyo ea katametso e ka fetoloa har'a [10%], [20%], [30%], [40%], [50%], [60%], [70% ], [80%], [90%] le [Mosebelisi].
• Karolo
  • Khetha karolo ea setšoantšo har'a [Full], [16:9], [1.85:1], [2.35:1], [4:3], [3:2], [1.3X], [1.5X] , [2.0X], [2.0X MAG].
    
  • Ho hlahlobisisa: Kenya tshebetsong kapa o tima ha sekenane.
    Hlokomela! Ke feela ha ho khethiloe mokhoa oa [Aspect] tlas'a [Scan], karolo le ts'ebetso ea ho hlahloba ho feta e ka lokisoa.
• Anamorphic De-squeeze
  Khutlisa deformation ea setšoantšo e bakoang ke lense ea anamorphic. Khetha khetho har'a [Ho tima], [1.33X], [1.5X], [1.8X], [2X] le [2X MAG].
• H / V Ho lieha
  Kgetha o mong wa mefuta ya H/V: [E Timile], [H], [V], [H/V]. Ha H/V e lieha, likarolo tse sa sebetseng tsa lets'oao la ho kenya li tla hlahisoa ka holimo kapa ka holimo.
• Qhatsela
  Khetha [Bulehile] ho nka foreimi e le 'ngoe ea setšoantšo sa hajoale skrineng, ebe u khetha [E tima] ho koala ts'ebetso ea leqhoa.
• Setšoantšo sa Flip
  Lumella setšoantšo se hlahang hore se phethiloe ka holimo kapa ka holimo ka ho khetha mofuta o le mong oa ho phetla har'a [H], [V], [H/V]
• Sheba Sebaka
  Sebelisa mekhoa ea ho hlahloba sebaka bakeng sa ho lekanya hantle kapa ho sekaseka likarolo tsa 'mala oa setšoantšo. Ka mokhoa oa [Mono], mebala eohle e koetsoe 'me ho bontšoa feela setšoantšo sa bohlooho. Ka [Bokhubelu], [Botala], le mekhoa ea ho hlahloba sebaka sa [Boputsoa], ho tla bontšoa feela 'mala o khethiloeng.
• Nako ea khoutu
  Sebelisa ntho ena ho kenya kapa ho tima Nako ea Khoutu. Ha e kentsoe, [LTC], [VITC]ke ea boikhethelo. Ka mehla: [E timiloe].
  Hlokomela: Nako ea khoutu e fumaneha feela tlas'a mokhoa oa SDI.
  Audio
  
• Bolumo
  Fetola molumo pakeng tsa 0-100. Boleng ba kamehla: 50.
• Level Meter
  Kgetha hore na o kenya tshebetsong kapa o tima boemo ba mithara. Ka mehla: [E butswe].
• Audio Channel
  Mokhoeng oa HDMI, khetha e 'ngoe ea likanale tsa molumo har'a [CH1&CH2], [CH3&CH4], [CH5&CH6], [CH7&CH8]. Ka ho kamehla: [CH1&CH2] Ka mokhoa oa SDI, khetha likanale tsa molumo har'a [CH1&CH2].
  Tlhophiso
  
• UI Config
  • Puo: [Senyesemane] le [中文] bakeng sa boikhethelo.
  • Nako ea Pontšo ea OSD: [10s], [20s], le [30s] bakeng sa boikhethelo. Kamehla: [10s].
  • OSD Transparency: [E tima], [25%], [50%] bakeng sa boikhethelo. Ea kamehla: [25%].
• HDMI
  • HDMI EDID
    Khetha HDMI EDID lipakeng tsa [4K] le [2K], kamehla: [4K].
  • Sebaka sa RGB
    Kgetha RGB Range lipakeng tsa [E lekanyelitsoeng] le [E Felletse], ea kamehla: [E lekanyelitsoe].
• Leseli la Morao
  Fetola boemo ba lebone le ka morao ho tloha ho [Auto], [E Tloaelehileng], [Kantle], [Moetlo], Boleng ba Tloaelehileng: 0-100. Kamehla: [50%].
• Mobala oa Mobala
  Khetho: [E tima], [100%], [75%], ea kamehla: [e tima]
• F Config
  Khetha FN "Configuration" bakeng sa ho seta. Mesebetsi ea konopo ea FN e ka etsoa ka mokhoa o ikhethileng: [Peaking], [Mmala o Fosahetseng], [Ho pepeseha], [Histogram], [Mokhoa o Felletseng], [Waveform], [Vector], [Timecode], [Mute], [Level Meter ], [Center Marker], [Aspect Marker], [Safety Marker], [Scan], [Scan], [Aspect], [Anamorphic], [Colour Space], [HDR], [Gamma], [Camera LUT ], [Sheba Tšimo], [H/V Ho Lieha], [Ho homisa], [Sets'oants'o Fepa], [Sets'oants'o sa Mebala]. Ka ho sa feleng: [E soma].
• Tsamaiso
  • Seta bocha
    Ha u khetha [Bula], khutlisetsa li-setting tsa feme.
    Taolo ea Khamera
    
    Tobetsa konopo ea "Khamera". ka lehlakoreng le letona ho fihlella UI ea taolo ea khamera. Ketso ho UI ea taolo ea khamera e bonts'oa kh'amera ea video ka nako ea nnete.
  • REC
    Ho laola ts'ebetso ea rekoto ea khamera ea video ho bula le ho tima
  • TSEBISO
    Ho laola maikutlo a khamera ea video.
  • ZOOM
    Ho laola lense ea khamera ea video.
  • IRIS
    Ho laola boholo ba lesoba la khamera ea video
  • Tobetsa letshwao ho kenya tshebetsong Play back Menu–Ho laola dintho tsa menu khamera ya video
  • Ho tsamaisetsa aetheme ea menu
  • Ho tsamaisetsa tlase ntho ya menu
  • Ho menu, e sebelisetsoang ho khutlela ho menu e fetileng. -
  • Ho menu, e sebelisetsoang ho kenya menu e nyenyane ea ntho e khethiloeng}
    HO LOKILE-- Ho netefatsa kgetho.
  • Bapala hape rekoto files ea khamera ea video
    DISP—E hlahisa litaba tsa hajoale tsa khamera ea video
    FUNC—Ho laola mosebetsi oa menu
    MAG—-Laola tšebetso ea ZOOM IN ea khamera ea video

Hlokomela: Karolo ena ea taolo ea khamera e tšehetsa feela likhamera tsa mofuta oa Sony tse nang le ts'ebetso ea S-Lance.

Lihlahisoa tsa lihlahisoa

Pontšo	Skrine se thetsoang	Capacitive touch
	Phanele	LCD ea 10.1 ″
	Qeto ea 'mele	1920x1200
	Aspect ratio	16:10
	Khanya	1500 cd/m²
	Bapisa	1000: 1
	ViewAngle	170°/ 170°(H/V)
Matla	Keletso Voltage	DC 7-24V
	Tšebeliso ea Matla	≤23W
Mohloli	Kenyeletso	HDM 2.0 x1 3G-SDI x1
	Sephetho	HDMI 2.0 x1 3G-SDI x1
Sebopeho se Tšehetsoeng	3G-SDI	1080P 24/25/30/50/60, 1080pSF 24/25/30, 1080i 50/60,720p 50/60
	HDMI 2.0	2160p (24/25/30/50/60) 1080P 24/25/30/50/60, 1080i (50/60), 720p 50/60
Audio	HDMI	8ch 24-bit
	Ear Jack	3.5mm-2ch 48kHz 24-bit
	Sebui	1
Tikoloho	Mocheso oa ho sebetsa	0℃~50℃
	Mocheso oa polokelo	-20 ℃ ~ 60 ℃
Kakaretso	Boemo (LWD)	251x170x26.5mm
	Boima ba 'mele	850g

*Keletso: Ka lebaka la boiteko bo sa khaotseng ba ho ntlafatsa lihlahisoa le likarolo tsa sehlahisoa, litlhaloso li ka fetoha ntle le tsebiso.

Lisebelisoa

• Lisebelisoa tse tloaelehileng

1. 0.8M HDMI AD cable: 1pcs
   
2. Mohala oa Lance: 1pcs
   
3. Sebaka sa lieta tse chesang: 1pcs
   
4. USB drive disk: 1pcs
   
5. Sunshade: 1pcs
   
6. Letlapa la betri: 1pcs
   
   1. Adapter ea matla ea 12V DC: 1pcs
      
      • Lisebelisoa tsa boikhethelo
   2. Adapter ea poleiti ea betri (e nang le cable): 1pcs
      
   3. Bracket ea Gimbal: 1pcs
      
   4. V-Lock betri plate+ VESA adaptara plate: 1sets
      

3D-LUT Loading

Tlhokahalo ea Sebopeho

• Sebopeho sa LUT
  Mofuta: .khube
  Boholo ba 3D: 17x17x17
  Taelo ea Lintlha: BGR
  Tafole: BGR
• Mofuta oa USB Flash disk
  USB: 2.0
  Sistimi: FAT32
  Boholo: <16G
• Tokomane ea ho lekanya mebala: LCD. khubu
• Mosebelisi LUT: User1.cube ~User6.cube

Phetoho ea mofuta oa LUT

Sebopeho sa LUT se lokela ho fetoloa haeba se sa kopane le litlhoko tsa mohlokomeli.
E ka fetoloa ka ho sebelisa LUT Converter (V1.3.30).

Sesebelisoa sa Mosebelisi oa Software

• Kenya tšebetsong sesebelisoa sa LUT.
  
  ID e le 'ngoe ea Sehlahisoa bakeng sa komporo e le' ngoe. Ka kopo, romella nomoro ea ID ho Thekiso ho fumana Enter Key. Ebe komporo e fumana tumello ea LUT Tool ka mor'a ho kenya Enter Key
• Kenya sebopeho sa LUT Converter ka mor'a ho kenya Enter Key.
  
• Tobetsa Input File, ebe u khetha *LUT.
  
• Tobetsa Output File, khetha ea file lebitso.
  
• Tobetsa konopo ea Hlahisa LUT ho qeta

USB Loading
Kopitsa se hlokahalang files ho buka ea motso ea disk ea USB flash. Hokela USB Flash disk boema-kepeng ba USB ba sesebelisoa ka mor'a hore motlakase o bulehe. Ha LUT e kentsoe, sebatli se tla kengoa ka bohona ka mor'a hore USB flash disk e kenngoe.(Haeba sesebelisoa se sa hlahe fensetere ea kapele, ka kopo sheba hore na lebitso la tokomane ea LUT kapa mofuta oa USB flash disk o kopana le se hlokoang ke mohlokomeli. )
E tla hlahisa molaetsa oa kapele haeba ntlafatso e phethiloe

Ho batle phoso

1. Pontšo ea botšo le bosoeu feela:
   Sheba hore na 'mala oa saturation o hlophisitsoe hantle kapa che.
2. Kenya matla empa ha ho na litšoantšo:
   Sheba hore na thapo ea HDMI e hokahane ka nepo kapa che. Hore na mohloli oa lets'oao o na le tlhahiso kapa mokhoa oa ho kenya ha o so fetoloe ka nepo.
3. Mebala e fosahetseng kapa e sa tloaelehang:
   Sheba hore na likhoele li hokahane ka nepo le ka nepo kapa che. Lithapo tse robehileng kapa tse hlephileng li ka baka khokahanyo e mpe.
4. Ha setšoantšong se bontša phoso ea boholo:
   Tobetsa “MENU → DISPLAY → ASPECT →OVERSCAN” ho atametsa ka hare/hole ditshwantsho
   ka ho iketsa ha o amohela matshwao a HDMI. Kapa ts'ebetso ea ZOOM e buletsoe.
5. Mokhoa oa ho hlakola 3D-LUT khamera ea basebelisi:
   K'hamera ea mosebelisi LUT e ke ke ea hlakoloa ka kotloloho ho sebali, empa e behiloe ka ho kenya kh'amera hape e nang le lebitso le tšoanang.
6. Mathata a mang:
   Ka kopo, tobetsa konopo ea "MENU" ebe u khetha "SYSTEM→ Reset → On".
   Hlokomela: Ka lebaka la boiteko bo sa khaotseng ba ho ntlafatsa lihlahisoa le likarolo tsa sehlahisoa, litlhaloso li ka fetoha ntle le tsebiso ea bohlokoa

Litokomane / Lisebelisoa

AVIDEONE HW10S 10.1 Inch Touch Screen Camera Control Field Monitor [pdf] Bukana ea Mosebelisi HW10S, HW10S 10.1 Inch Touch Screen Camera Control Field Monitor, 10.1 inch Touch Screen Camera Control Field Monitor, Screen Camera Control Field Monitor, Camera Control Field Monitor, Control Field Monitor, Field Monitor

Litšupiso

• Bukana ea Mosebelisi