AudioControl Three.2 In-Dash System Controller

22410 70th Avenue West
Mountlake Terrace, WA 98043 USA
Fono 425-775-8461
Fax 425-778-3166

Selelekela

• Rea u lebohela ha u rekile sehlahisoa se ikhethang le se sebetsang haholo, AudioControl THREE.2, ea morao-rao le e kholo ka ho fetisisa lelapeng la li-in-dash signal processors. Ho feta tekano feela, THREE.2 ke molaoli oa tsamaiso e feletseng / pele hoamp, joalo ka ha u fumana lits'ebetso tse ntle ka ho fetisisa tsa audiophile tsa lapeng. THARO.2 ha e ntlafatse feela boleng ba molumo le ts'ebetso ea leha e le efe ampSistimi ea molumo oa koloi ea li-fied empa, e u fa audiophile boleng ba 24dB/octave electronic crossover.
• THREE.2 ena e ncha e holisa khetho ea hau ea sistimi ka ho fana ka Litlhahiso tse peli tse thusang. Joale o ka hokela iPod ea motsoalle ho sistimi ea hau neng kapa neng. Ha ho moferefere, ha ho moferefere. THREE.2 ke motsoako o loketseng oa likarolo le ts'ebetso e ntlafetseng bakeng sa motho leha e le ofe ea chesehelang molumo oa koloi, ho sa tsotellehe hore na u dae ka har'a tlhōlisano ea molumo oa boea kapa u mpa u batla ho senya tsamaiso ea hau ho fihlela mehaho e haufi e sisinyeha.
• Tsohle li mabapi le boleng ba molumo le khetho…ea hau.
• THREE.2 e tla u lumella ho tsamaisa sistimi ea hau ho seo u se ratang, 'me u sebelise mohloli ofe kapa ofe oo u batlang ho o sebelisa…ha u batla ho o sebelisa. Ho ea ka mantsoe a Mel Brooks "Ho hotle ho ba Morena" Joale lula fatše 'me u nke bori ba lapeng 'me u bale Bukana ena ea Thabo bakeng sa THRE.2 in-dash equalizer.

Likarolo tsa tse THARO.2

• Tekano ea litšoantšo tsa stereo
• Ka pele le ka morao, lisebelisoa tse peli tse thusang
• Para-BASS® contouring e tlase ea maqhubu
• Mabone a ka morao a 'mala o moputsoa o pholileng kapa a khubelu a chesang
• 24dB/Octave Linkwitz Riley crossover
• Pele hoamp phaello ea 20dB
• Mokhanni oa mohala: 13 volts peak output
• Taolo ea boemo ba Subwoofer
• Phepelo ea motlakase ea PWM e phahameng ka kamoreng e phahameng
• Taolo ea molumo o moholo le taolo ea fader
• LED Voltage Kopo

PHAKAMA TSEBISO TSA HO KENYA

Bakeng sa lona ba nang le nako e khuts'oane 'me ba itšepa, kapa caffeine mabapi le taba eo, sheba leqephe la 8 ho isa ho la 13 (Litšoantšo 6, 7, 8 le 9). Ha ho buuoa ka THREE.2 e romelloa ka tlhophiso e latelang:

AudioControl e haha ​​​​ts'ebetso e phahameng, lihlahisoa tsa tekheniki 'me re tsetela nako e ngata ea koetliso le barekisi ba rona ho fumana ts'ebetso e phahameng ho tsoa sehlahisoa ka seng. Ke ka lebaka leo re khothaletsang hore u nahane ka hore morekisi oa hau ea lumelletsoeng oa Audio- Control a kenye tse THARO.2. Ha e le hantle, haeba a kenya THREE.2 ea hau, re tla eketsa tiisetso ea hau ho likarolo tse sa kholoeng tsa lilemo tse 5 le mosebetsi. Haeba u ka khetha ho kenya THREE.2 u le mong, re tla e tiisa bakeng sa likarolo tsa selemo sa 1 le mosebetsi.

LIEKETSENG LE LINTLHA TSE KHOLO

Karolo e latelang e tla u bolella ka likarolo tsohle tse ntle tsa THARO ea hau.2. Ho tseba likarolo tsena ho tla u thusa ho ntlafatsa ts'ebetso ea THREE.2 in-dash pre-amp/equalizer/crossover. U tla boela u fumane lintlha le metsoalle ea hau ea li-autosound.

Graphic Stereo Equalization:

THREE.2 e fetola dashboard ea koloi ea hau hore e be boto e kopanyang, joalo ka studio ea ho rekota. THREE.2 e na le li-control tse tharo tse behiloeng ho 125Hz, 1.25KHz, le 10KHz ka ho latellana. Li-frequency li khethiloe ho u fa taolo e lekaneng ea ho etsa lintlafatso tse kholo tsamaisong efe kapa efe.
Para-BASS®: U batla bass, re na le bass. Taolo ena e hlophisitsoeng ka ho khetheha e u lumella ho fetola karabelo ea bass ea sistimi efe kapa efe ho latela takatso ea hau ea ho mamela. Ka lebaka la mefuta eohle ea mefuta e fapaneng ea 'mino e kopantsoeng le liphoso tse ngata tse ka bang teng tsa bass koloing e' ngoe le e 'ngoe, taolo e le 'ngoe ea bass ha e fokotsehe. Ho tšoana le ho penta setšoantšo se nang le 'mala o le mong feela ...

Khetho ea ho Kena:

THREE.2 e fana ka tlhahiso ea "Main" RCA karolong e ka morao ea yuniti. E boetse e fana ka likhetho tse peli bakeng sa kenyelletso ea Thuso. E 'ngoe e karolong e ka morao bakeng sa Aux-in ea ka ho sa feleng,' me e 'ngoe e teng ka pele-pan-el. Haeba u batla feela ho khona ho hokela iPod ka linako tse ling, u ka sebelisa karolo e ka pele ea 1/8”. Hape, li-Aux-ins tse THREE.2 li ntlafalitsoe ka phaello e eketsehileng ho lefella matšoao a fokolang a tsoang ho li-iPod le libapali tse ling tsa MP3.
24dB/Octave Linkwitz Riley Crossover: Molemo oa ho lokisa sistimi ea hau ke ofe haeba o sa khone ho tsamaisa maqhubu a nepahetseng ho ea sebakeng se nepahetseng? amplikanale lifier? The audiophile crossover in the THREE.2 ke crossover e tšoanang likarolong tse ling tse ngata tse hapileng likhau tsa AudioControl. Na ua tseba hore na ke mang hape ea u fang 24dB Linkwitz-Riley ho EQ ea bona e potlakileng? Ha ho motho! Sena se boetse se hole le li-crossovers tsa wimpy tse fumanang tsela ea tsona ho tse ling amplifiers matsatsing ana.

Pele hoAmp Mokhanni oa Line:

Bua ka lintho tse makatsang tsa hau. Li-amplifiers li hloka molumo o phahamengtaglets'oao la ho kenya (ka kakaretso 2 ho isa ho 5 volts) ho sebetsa ka bongata bo matla le karo-karolelano e ntle ka ho fetisisa ea lerata. Ka lehlakoreng le leng, likarolo tse tloaelehileng tsa mohloli li hlahisa feela 1 ho 2 volts, haeba u le lehlohonolo. Ka mokhoa oo mohloli oa mohloli o leng teng ka pele ho koloi le ampLifier (s) li fumaneha ka morao, bolelele ba likhoele tse hokahanyang li ka ba le tšusumetso e mpe ho matla a lets'oao. THARO.2 e kenyelletsa mokhanni oa mohala o nkang tlhahiso e fokolang ea voltage ea yuniti ea hlooho ebe e e eketsa 20dB (ho fihla ho 13 volts tlhoro) ebe e e isa tlase ho metsi amplisebelisoa tsa lifier.

Buka ea Master:

THREE.2 e na le molumo o moholo oa molumo oa KNOB (ha ho na li-switches tse halefisang holimo le tlase bakeng sa rona) ho laola tlhahiso ea lets'oao ho amplifiers. Phahamisa bophahamo ba molumo ho li-unit tsa hau tsa mohloli ho fihlela boholo ba tsona 'me ha ho sa tla hlola u hloka ho li ama hape.

Taolo ea Boemo ba Subwoofer:

U hloka li-bass tse nyane ho khahlisa metsoalle ea hau? Kapa mohlomong u batla ho e theola fatše e le hore u se ke ua tšosa letsatsi la hau. Ho sa tsotellehe hore na boemo ke bofe, THREE.2 e na le taolo ea boemo ba subwoofer e u lumellang hore u leka-lekanye palo ea pontšo e eang ho lihlahisoa tsa hau tsa subwoofer.

Fader Control:

THREE.2 e na le likanale tse 4 tsa tlhahiso le taolo ea fader ho lumella ho leka-lekanya habonolo pakeng tsa libui tse ka pele le tse ka morao.
Ho tšepahala ho Bulletproof ea AudioControl. Ho lokile, AudioControl THREE.2 ea hau e tla le likarolo tse felletseng tsa lilemo tse 5 le tiisetso ea basebetsi ha e kentsoe ke morekisi ea lumelletsoeng oa United States oa AudioControl. Litsebi tsena tsa khale li na le koetliso le lisebelisoa tsa ho hlokomela mosebetsi kapele le ho se tlohele dashboard ea hau e shebahala joalo ka chisi ea Switzerland. Hopola hore haeba uena kapa metsoalle ea hau e le "molemo ka li-electron-ics" 'me u khetha ho e kenya u le mong, THREE.2 ea hau e ntse e e-na le likarolo tsa selemo sa 1 le tiisetso ea mosebetsi. Ho kenya waranti ya hao tshebetsong, eya inthaneteng feela ho audiocontrolregistration.com mme o tlatse tlhahisoleseding eo o e batlang Hape, boloka invoice ya hao kapa selipi sa thekiso e le bopaki ba hore o rekile. Sena ha se hlokahale feela bakeng sa merero ea tiisetso, hape ke habohlokoa haeba ho nyamela ho sa lebelloang ha THREE.2 ea hau ho lokela ho etsahala ha u ntse u thabela botsoalle sebakeng sa sebaka sa espresso le saalmon bar. Lik'hamphani tsa inshorense li na le monahano o fokolang haholo.

Leseli:

THREE.2 e khantša e le hore u bone seo u se etsang bosiu ka mabone a morao a Cool Blue kapa a Hot Red. U ka khetha 'mala o u lekanang hantle.

LEETO LE ATAILENG LA BORARO.2

1. Keletso ea Aux: Jack 1/8" e phaneleng e ka pele e lumella ho kenya letsoho ho hokeloa kapele le ha bonolo ka nako efe kapa efe. Ho hokela ka har'a jack ea Aux In e ka pele ho tla etsa hore e fete Aux In e ka morao. Ha o hula jeke e ka pele, jeke e ka morao e tla sebetsa hape. Cool eh?
2. Lihlopha tsa Tekano ea Graphic: Litaolo tse tharo tsa stereo tse bohareng ba 125Hz, 1.25KHz, le 10 KHz tse nang le 12dB ea boost kapa cut. Litaolo tsena li lokela ho sebelisoa ho nchafatsa sistimi ea hau, ho latela maikutlo a hau kapa lisebelisoa tsa lenaneo.
3. Litaolo tsa Para-BASS ®: Litaolo tse peli tse bonolo li lumella "killer bass tweaking". Knob ea ho fiela e khetha setsi sa fre -quency, pakeng tsa 40 le 80Hz. Konopo ea phaello e fana ka 12dB ea matlafatso kapa sehiloeng, e shebaneng le maqhubu a fiela.
4. Tlhokomelo ea Level ea Subwoofer: Hantle-ntle seo e se buang. E laola palo ea pontšo e eang ho sub-woofer tlhahiso ea THARO ea hau.2.
5. Fader: Neng ampliteishene tsa lifier li hokahantsoe le liphetho tse ka pele le tse ka morao, taolo ea fader e tla u lumella ho fifatsa boemo ba lets'oao pele le morao. Sena se boetse se bolela hore o ka fifala ka pele le ka morao leha yuniti ea hau ea mohloli e na le liphetho tse 2 feela.
6. Bolumo: Hobane tse THARO.2 ke 'nete pele hoamp, e sebetsa e le karolo e ka sehloohong ea taolo tsamaisong ea molumo. E na le taolo e kholo ea molumo e laolang tlhahiso ho tsohle tsa hau amplifiers. Karolelano e ntle ka ho fetisisa ea mats'oao ho lerata ('me ka hona boleng bo holimo ba molumo) ho tsoa yuniti ea hlooho ea hau e ka ba molumo oa 3/4. Hona joale, u ka fetola hlooho ho ea moo e utloahalang hantle, ebe u sebelisa knob ea molumo ea THREE.2 ho fana ka amps lets'oao le hloekileng ka ho fetesisa molumo oo u batlang ho o mamela. Sephetho? Molumo o motle ka ho fetisisa boemong bo bong le bo bong ba molumo.
7. Mohloli: Konopo ea mohloli e u lumella ho khetha lipakeng tsa MAIN e leka-lekaneng ka mokhoa o fapaneng le kenyelletso e sebetsang ea Thuso
8. Kenya Jacks: THREE.2 e na le lihlopha tse tharo tsa lintho tse kenang,
   BOHLOKOA mmoho le Bathusi ba babeli. Lisebelisoa tsa MAIN li lokela ho fumana matšoao a tsona ho tsoa mohloling o moholo oa mohloli / hlooho ebe li hokela ho li-jacks tsa RCA. Lisebelisoa tsa tlatsetso li tla hokela ka har'a jeke ea 1/8 ″ karolong e ka morao ea phanele bakeng sa khokahanyo ea ka ho sa feleng kapa jekeng e ka pele bakeng sa tšebeliso ea nakoana. Ho hokela phanele e ka pele le e ka morao ea li-Aux ka nako e le 'ngoe ho ke ke ha baka tšenyo ho li-unit, empa ho ka baka ho taboha ha nako e ntse e tsoela pele. Ha e le hantle, ha o hokela ka pele, THREE.2 e tla koala ka bo eona karolo e ka morao
9. Li-jacks tsa Output: Haufi le lisebelisoa ke lihlahisoa, tse lokelang ho hokahanngoa ka pele, ka morao le subwoofer ampbahlahisi, haeba ho hlokahala.
10. Maqhama a Matla: Sehokelo sena sa nifty ke tlhohonolofatso ho mang kapa mang ea lekileng ho kenya lisebelisoa tsa bona ka hlooho ka tlas'a dash. O ka hokela motlakase, fatše, ho bulela remoutu, le ho bonesa ho tsoa sebakeng se bonolo sa setulo sa bakhanni ebe o se hokela ka morao ho THREE.2 ea hau.
11. Sekhethi se Kenang se Leka-lekaneng: Ka tlas'a sekoahelo le lipakeng tsa lihokelo tsa Kenyelletso ho na le li-jumpers tse u lumellang hore u sebelise kapa u fete seketsoana se lekantsoeng. Le hoja e romelloa ka mokhoa o sa leka-lekaneng, oo hangata o leng molemo ka ho fetisisa, ho ka 'na ha hlokahala hore u fetole sena ho itšetlehile ka tlhophiso ea likarolo tseo u li sebelisang. Ho fetola sena, tsamaisa jumper e loketseng hloohong ea li-pin tse 3.
12. Taolo ea ho Kena: Potentiometer ena (aka "pitsa") e sebelisoa ho eketsa bongata ba molumo oa molumotage matleng a hao amplifiers. Ka taolo ena o ka fana ka ho fihla ho 13 Volts (tlhoro) ho ea hau amplintlha tsa lifier. Sheba le hau amplintlha tsa moetsi oa lifier ho fumana hantle hore na matla a maholo hakaetage ba hlile ba khona ho sebetsana. Lintlha tse ling mabapi le sena karolong ea "Level Matching"
13. Crossov er Frequency Selection: Pitsa ea phetoho ea crossover e khetha makhetlo ao lihlahisoa tse ka pele / tse ka morao tsa THREE.2 ea hau li tla bapala ho ea ho moo subwoofer ea hau e tla qala ho bapala. Ho na le switch ea bypass (off / on) e u lumellang ho hlola crossover, kahoo haeba sistimi ea hau e sa sebelise subwoofer e arohaneng, tsohle tsa hau. amplifiers li tla fumana lets'oao le felletseng ho tsoa ho liphetho tse ka pele / tse ka morao. Sehlahisoa sa subwoofer se tla lula se le tlase se fetisitsoe ka sekhahla se khethiloeng.
14. Khetho ea Leseli: Li-jumpers tsena li u lumella ho fetola khanya ea lebone la morao hore e be Cool Blue kapa Hot Red.
    Kaha re tloaelane le bophelo bo sa lefelloeng ba letsatsi morung oa pula, re rometse THREE.2 ka mokhoa oa Cool Blue.
15. Sekhethi se Isolulang ka Motheong: Karolo ena e u lumella ho fetola sebaka sa phepelo ea motlakase bakeng sa litsamaiso tse fapaneng. Ha THARO.2 e romelloa ho tloha fekthering, mokhethoa o boemong bo ikemetseng ka ho feletseng (eo ka kakaretso e leng molemo ka ho fetisisa). Oho, ha se moetsi e mong le e mong ea qetang nako e ngata hakana ho lokisa mabaka a hae. Ka hona, re fane ka likhetho tse ling tsa ho itšehla thajana ho thusa haeba u na le lerata la loop ea fatše (alternator whine) tsamaisong ea hau. Leka ka litlhophiso tse fapaneng haeba u tobana le bothata ba mofuta ona. Ho fetola li-setting, tima sistimi, tlosa jumper e ntšo ka hloko ho tloha bohareng ba lithapo tse peli (Isolated) ebe u e isa ho lithakhisa tse peli tse holimo (200Ω) kapa lithakhisa tse peli tse tlase.
    (Lefatše).

Hona joale: Haeba u ikutloa u sa phutholoha ka ntho e 'ngoe le e' ngoe eo u e balileng ho fihlela joale, matha, u se ke ua ea ho morekisi oa hau ea haufi oa AudioControl 'me u ba lumelle ho e kenya. Bophelo bo bokhutšoanyane haholo hore u ka hahola moriri oa hau holim'a sistimi ea molumo oa koloi ea hau.

HO KENYA MOLAOLI OA HAO OA THARO.2 IN-DASH SYSTEM

Ha u se u kentse ntho e 'ngoe le e' ngoe e bukeng ho fihlela joale, mohlomong ua tseba hore re khothaletsa ho ba le pro -fessional install THREE.2 ea hau, kaha e ka ba molemong oa hau bakeng sa ts'ebetso 'me e tla eketsa tiisetso ea hau ho lilemo tse 5. Ka holim'a ho ba le tsebo le boiphihlelo bo nepahetseng ba tekheniki, ba na le lisebelisoa tse ngata tse ntle. Haeba u ntse u e-na le rona 'me u ikutloa u itšepa, bala ho ea pele…

A. Ho Bea le ho Hloma THARO.2 In-Dash Equalizer/Crossover

• Sebaka: Ka tlhaloso, THREE.2 in-dash equalizer e ne e etselitsoe hore e kenngoe haufi kapa haufi le dashboard ea likoloi tse ngata. Leha ho le joalo, haeba u ntse u haha ​​​​sistimi ea maqheka ea 'nete, joalo ka ha ho na le sistimi ea molumo e arohaneng ka pele le e arohaneng ka morao ho koloi, THREE.2 ke e loketseng pele ho moo.amp taolo e ka phahamisoang ka pele le/kapa bokamorao ba koloi.
• Ho hlongoa: THREE.2 e tenyetseha ka ho lekaneng hore e ka hloella kae kapa kae, le hoja kae-kae ho dash kapa center console ke eona e utloahalang ka ho fetisisa. U tla batla ho khona ho e fumana u ntse u lutse setulong sa mokhanni oa koloi ea hau. THREE.2 e etselitsoe hore e kenngoe hohle ka koloing, leha ho khothaletsoa ho qoba libaka tse chesang joalo ka firewall, compartment ea enjene, kapa pipe ea mohatla. Sebaka seo ho hlongoang ho sona se boetse se lokela ho ba se bolokehileng ho tsoa metsing kapa libakeng tse nang le litiiso tse mpe (li-gaskets tsa rabara, eseng liphoofolo tse anyesang tse boea tse boea tse jang salmon). Haeba ho na le matheba a khale a metsi, ela hloko ho lutla 'me u se ke ua ba teng. Re fane ka masakaneng ho u thusa ho kenya chassis ea THREE.2 tlas'a dash-board kapa glove box. Li-screw masoba holim'a chassis ea THREE.2 le tsona li lumella ho kenya habonolo ka tlas'a seea-le-moea kapa ka thipa ea dash. Ho bohlokoa ka ho fetesisa ho kenya THREE.2 ka mokhoa o sireletsehileng ho qoba khatello ea maikutlo e sa hlokahaleng kapa karohano e tsoang ho over ac -celeration kapa braking.

B. THARO.2 Mohala oa Motlakase

• TSEBISO E KHABISA Hakolla theminale e fosahetseng ea betri ea koloi ea hau pele u sebelisa likhokahano life kapa life tsa motlakase. Ho hlōleha ho etsa joalo ho ka baka tlhase e khōlō bophelong ba hao.
• Ho bulela Remote: Hokela terata ya 22 ho isa ho 18 gauge ho tloha ho remoutu ya yuniti ya hlooho ho ya ho sehokelo sa “Remote” ho tse THARO.2.
• Khokahano e Ntle(+12V): Kenya terata ea 18 gauge kapa e kholoanyane ka har'a sehokelo se ngotsoeng "Power" sehokelong sa nifty sa THARO ea hau.2. E kopanye le mohloli o motle, o sa khaotseng oa li-volts tse 12 (re fana ka maikutlo a betri).
• Khokahano ea fatše: Sebelisa terata ea gauge e tšoanang le eo u e entseng bakeng sa sehokelo se nepahetseng 'me u se tsamaise ho tloha ho "Ground" sehokelo ho THREE.2 ho ea sebakeng se fosahetseng sa betri, bese ea fatše, kapa sebaka se tiisitsoeng sa fatše. Sebaka sa hlooho ea fektheri ha se khothalletsoe.
• Leseli: Sehokelo se ngotsoeng "Illumination" ho THREE.2 ea hau se fana ka matla ho khanya ea morao ea yuniti ea hau. Ho e hokahanya le mohloli o fetotsoeng oa 12 volt, joalo ka "Remote" e tla khantša khanya ea hau ea THREE.2 ea hau.
  Maikutlo a pholileng haholo ke ho hokahanya terata e khanyang ho dash light dimmer ea fektheri 'me u be le bokhoni ba ho fokotsa khanya e ka morao ea THREE.2 ka mabone a dash.

C. THARO.2 Audio Wiring

Rera: Joalo ka ha o se o ntse o nahanne, ho na le mekhoa e mengata ea ho hlophisa THREE.2 tsamaisong ea hau ea molumo. Sebelisa nako e nyane ea boleng ho rera sistimi ea hau esita le ho e taka pampiring haeba u khona. Litšoantšo tse latelang ke tse 'maloa feela tsa menyetla.

Ka pele, ka morao le subwoofer ampmoqhobi

Manane a mane le subwoofer ampmoqhobi

RV/Boat ntle le yuniti e tsitsitseng ea mohloli

Sistimi e bonolo ea 2-way

D. Ho Bapisa Maemo

Baetsi ba bangata ba bolela hore likarolo tsa bona tsa mohloli li hlahisa molumo oa molumotage sebakeng sa 2 ho 4 volts. Leha ho le joalo, seo ba hlokomolohang ho se bolela ke hore u fihlela li-voltamo tsena tse makatsangtage ha molumo o phahamisoa ho ea holimo. Leka ho mamela seo ka linako tsohle. Ka ho latela mehato e tsamaisanang le boemo bakeng sa tse THARO.2 u tla khona ho nka advan e felletsengtage ea matla a phahamengtage tlhahiso ea hlooho ea hau.

1. Hakolla likhoele tsa RCA tse lebisang ho hau amplifiers, 'me u etse bonnete ba hore lithapo tsa RCA feela pakeng tsa hlooho ea hau le lintlha tse kholo tsa THREE.2 li khomaretsoe. Fetolela knob ea boemo ba molumo ho THARO.2 ho ea holimo.
2. Bapala compact disc kapa MP3 eo u e ratang haholo e nang le 'mino o tsitsitseng, o matla,' me u fetole taolo ea molumo oa mohloli ho fihla boemong ba eona bo phahameng (TLHOKOMELISO: Lisebelisoa tse ling tsa mohloli li ka hlahisa ho khopama kapa ho "clipping", ha li-control tsa molumo li phahamisoa ho ea holimo. Haeba sena se etsahala, o tla utloa ho sotha le maemong a tlase ha o hokela sistimi e ngoe. Haeba ho le joalo, theola bophahamo ba molumo oa mohloli oa mohloli ho fihlela o se o sa utloe ho sotha). Taolo ea molumo ho tse THARO.2 joale e tla ba taolo ea molumo o moholo.
3. U sebelisa screwdriver e nyane, lokisa taolo ea "Input Gain" ka holim'a tse THARO.2 ho fihlela LED e mosehla ea "Maximized" e qala ho lla ka 'mino (HLOKOMELA: Haeba khanya ea Maximized e sa bone, ka lebaka la tlhahiso e tlase ea yuniti ea mohloli, fetola pitsa ea Input Gain ho ea holimo).
4. Tima tsamaiso eohle 'me u kopanye lihlahisoa tsa RCA's ho tloha ho THREE.2 ho ea karolong e latelang moleng.
   Keletso ea Bohlokoa
   Haeba lebone la Maximized le sa bone, ka lebaka la tlhahiso e tlase ea mohloli oa mohloli, fetola Phaello ea Input ho ea holimo. Ka kopo sheba ho amplintlha tsa bahlahisi ba lifier volt -age ho etsa qeto ea hore na u tla hloka ho fokotsa "Input Gain" ho THARO.2 ho qoba ho khaola karolo e latelang moleng. Haeba karolo e latelang moleng e le karolo ea AudioControl, ha ho hlokahale hore u lokise hape "Melemo ea ho Kena", hobane e khona ho sebetsana le molumo oa mocheso o chesang.tage tse THARO.2 hlahisa.
5. Fokotsa taolo ea phaello ho hau amplifiers ho ea boemong bo bobebe haholo bo ntseng bo feto-fetola palo ea taolo ea gain -ter ho ea ka tluoane. Sena se tla u lumella ho khanna lets'oao le chesang ho hau amplifiers. Bakeng sa lintlha tse ling mabapi le sena, khoasolla Tech Note 1006 ho rona web sebaka.

E. Ho Beakanya The Equalizer

1. Li-Stereo Bands: Ha ho litataiso tse tobileng mabapi le ho beha litaolo tse kholo tsa tekano ho tse THARO.2. Hopola hore 'mino o ka utloahala o fapane ho itšetlehile ka hore na o mamela mang le hore na o mamela' mino oa mofuta ofe. Bakeng sa ho raha bohareng ba bass, fana ka konopo ea 125Hz. Ka lehlakoreng le leng haeba libui tsa hau tse ka pele le tse ka morao li na le bothata ba ho tsamaisana le subwoofer ea hau ho feta crank 125Hz tlase notch. Haeba mantsoe a hloka ho matlafatsoa kapa ho theoloa, re laola 1.25KHz. Serame ho rekoto efe kapa efe e lula e le maqhubu a holimo. Taolo ea 10KHz e o lumella ho fana ka serame se lekaneng kapa o ka fokotsa morao hore o se ke oa fumana likheo. Ha ho na tlhoko ea ho fetola "Meputso ea ho Kena", hobane ba khona ho sebetsana le molumo o chesang oa molumo.tage tse THARO.2 hlahisa.
2. Litaolo tsa Para-BASS ®: Para-BASS® taolo ea sistimi e sebetsa le sistimi efe kapa efe e ka hlahisang li-bass mofuteng oa 40-80Hz. Karabelo ea bass tsamaisong e angoa ke lintlha tse 'nè
   1. molumo oa sepalangoang
   2. sebaka sa dibui
   3. mohloli oa 'mino oo u o mametseng le
   4. libui tse sebelisitsoeng. Ka lebaka la ho fapana ha mokhoa oa ho rekota, re thehile The Epicenter™ ho thusa ho khutlisetsa maqhubu afe kapa afe a tlase a lahlehileng nakong ea ho rekota. Leha ho le joalo, li-acoustics tsa libaka tse fapaneng li fapane. Re nahanne ka sena baenjiniere ba rona ba nang le kofi ba hlahisitse mokhoa o ikhethang oa Para-BASS®. Taolo ea "Fiela" e u lumella ho khetha maqhubu a setsi (maqhubu a amehang haholo) pakeng tsa 40 le 80hz. Taolo ea "Gain" e u fa monyetla oa ho phahamisa kapa ho khaola ka lebelo le khethiloeng.
3. Hi- SPL: Mokhoa o potlakileng oa ho fumana li-bass tse ngata ke ho theola taolo ea "Gain" ho fihla ho 12dB le "Fiela" lipakeng tsa 40-80hz ha u ntse u mametse 'mino o mong. Ha o fumana ho phahama ka tšohanyetso karabong ea bass, tsohle tsa hau li behiloe.

Ho batle phoso

Haeba U Rata BA THARO.2, U tla Rata

E na le 24 dB ea phaello, e ka eketsang pele hoamp maemo a lets'oao ho fihla tlhorong ea 9.5 volts RMS/13 volts, mokhanni oa mola oa Matrix Plus o tla fetola sistimi ea hau ea molumo.

Letoto la Epicenter ® Con-cert Series ke karolo ea rona ea patent (US Patent #4,698,842) e khutlisetsang "woof" ho woofer efe kapa efe. U tlameha ho e utloa ho e lumela.

'Me joale lentsoe le tsoang lefapheng la molao

TIISETSO

Batho ba tshaba diwaranti. Likhatiso tse ngata tse ntle. Likhoeli tsa ho leta ho pota. Che, u se ke ua hlola u tšoha, tiisetso ena e etselitsoe ho etsa hore u bue ka rona ho metsoalle ea hau. Ke boikitlaetso ba ntoa bo u hlokomelang 'me bo u thusa ho hanela moleko oa ho etsa hore motsoalle oa hau, “…ea tsebang ho sebelisa lisebelisoa tsa elektroniki” a leke ho lokisa sehlahisoa sa hau sa AudioControl. Kahoo tsoela pele, bala tiisetso ena, ebe u nka matsatsi a 'maloa ho natefeloa ke THREE.2 ea hau e ncha pele u ingolisa inthaneteng le ho re fa maikutlo a hau.
“Maemo” ha e bolele letho le tshosang. Federal Trade Commission e bolella baetsi bohle ho sebelisa lentsoe ho bontša hore maemo a itseng a tlameha ho finyelloa pele ba ka hlompha waranti. Haeba u fihlela lipehelo tsena kaofela, re tla fana ka tiisetso ea lisebelisoa tsohle le mosebetsi ho tse THARO.2 bakeng sa selemo se le seng ho tloha letsatsing leo u li rekileng ka lona (lilemo tse hlano haeba li kentsoe ke morekisi ea lumelletsoeng oa United States AudioControl) Re tla e lokisa kapa re e khutlise. , ka khetho ea rona, nakong eo.

Maemo a nang le maemo ke ana:

1. U tlameha ho ea inthaneteng ho audiocontrolregistration.com 'me u tlatse lintlha tsa tiisetso.
2. U tlameha ho boloka rasiti ea hau ea thekiso bakeng sa bopaki ba theko e bontšang hore na unit e rekiloe neng le ho mang. Ha se rona feela ba hlokang sena, kahoo ke tloaelo e ntle ho kena ka theko efe kapa efe e kholo.
3. THARO.2 ea hau e tlameha ebe e rekiloe ho morekisi ea lumelletsoeng oa AudioControl. Ha ho hlokahale hore u be mong'a pele, empa u hloka kopi ea selipi sa mantlha sa thekiso.
4. U ke ke ua lumella mang kapa mang ea seng: (A) feme ea AudioControl; (B) motho ea lumelletsoeng ka ho ngola ke AudioCon-trol ho sebeletsa BATHARO ba hau.2. Haeba mang kapa mang ntle le (A) kapa (B) a senya le THARO.2 ea hau, seo se hlakola tiisetso ea hau.
5. Tiisetso e boetse ha e na letho haeba nomoro ea serial e fetotsoe kapa e tlosoa, kapa haeba THARO.2 e sebelisitsoe hampe. Jwale seo se utlwahala eka ke lesoba le leholo, empa ke sena sohle seo re se bolelang ka sona.
   Tlhekefetso e sa hlokahaleng ke: (A) tšenyo ea 'mele (o se sebelise tse THARO.2 bakeng sa jeko ea koloi); (B) likhokahano tse sa nepahalang (li-volts tse 120 ka har'a jack ea matla li ka chesa ntho e futsanehileng); (C) lintho tse bohloko.
   Ena ke sehlahisoa se setle ka ho fetisisa sa mohala seo re se tsebang ho se haha, empa haeba u se beha holim'a bumper e ka pele ea koloi ea hau, ho na le ho hong ho tla senyeha.
6. Haeba morekisi ea lumelletsoeng oa United States AudioControl a kenya THREE.2, tiisetso ke lilemo tse hlano.
   Ha re nka hore o lumellana le 1 ho isa ho 6, 'me ha ho thata ho etsa joalo, re fumana khetho ea ho lokisa yuniti ea hau ea khale kapa ho e nkela e ncha.

Karolo ea Legalese

1. Ena ke eona feela tiisetso e fanoeng ke AudioControl. Tiisetso ena e u fa litokelo tse khethehileng tsa molao tse fapaneng ho ea ka linaha.
2. Litšepiso tsa hore na tse THARO.2 tsa hau li tla sebetsa hantle hakae ha lia boleloa ke tiisetso ena. Ntle le seo re se koahetseng tiisetsong ena, ha re na tlamo, ho hlalosa kapa ho fana ka maikutlo.
3. Hape, re ke ke ra tlameha ho ba le ts'enyehelo e tobileng kapa e sa tobang ea sistimi ea hau e bakoang ke ho hokela AudioCon-trol THREE.2. Ho hloleha ho romela karete ea war-ranty e tlatsitsoeng hantle ho hanana le likopo tsa litšebeletso.

LIEKETSENG TS'OANELO

Lintlha tsohle li lekantsoe ho 14.4 VDC (standard vol voltage). Ha theknoloji e ntse e hatela pele, AudioControl e na le tokelo ea ho lula e fetola maemo a rona, joalo ka boemo ba leholimo ba rona.

AudioControl, Making Good Sound Great, Perfor-mance Match, The Epicenter, Three.2, Matrix Plus, le ParaBASS kaofela ke matshwao a kgwebo a AudioControl, Inc. Lingoliloeng tsena li ile tsa qaptjoa, tsa qaptjoa, tsa ngoloa holim'a pula e lerootho, e nang le moea o matla le e tšosang. - letsatsi le kolobileng lapeng la rona ho Pacific Northwest Rainforest.

© 2021, AudioControl, karolo ea Electronic Engineering and Manufacturing, Inc. Litokelo tsohle li sirelelitsoe.

Ho Etsa Molumo o Molemo o Moholo ®
22410 70th Avenue West Mountlake Terrace, WA 98043 USA 425-775-8461 • Fax 425-778-3166 www.audiocontrol.com
© 2021, AudioControl, Inc. Litokelo tsohle li sirelelitsoe

Litokomane / Lisebelisoa

AudioControl Three.2 In-Dash System Controller [pdf] Buka ea Mong'a Three.2 In-Dash System Controller, Three.2, In-Dash System Controller, System Controller, In-Dash Controller

Litšupiso

• Bukana ea Mosebelisi