Arduino ASX00037 Nano Screw Terminal Adapter
Litlhaloso
- Sehlahisoa sa Reference Manual SKU: ASX00037_ASX00037-3P
- Libaka tse reriloeng: Moetsi, merero ea Nano, Prototyping
Tlhahisoleseding ya Sehlahiswa
Nano Screw Terminal Adapter e etselitsoe ho aha merero ka mokhoa o sireletsehileng le ho eketsa lipotoloho tse nyane bakeng sa taolo e eketsehileng ntle le tlhoko ea ho soasoa. E na le lihokelo tsa screw tse pepesang lithakhisa tsohle tsa I/O ho tsoa botong ea hau ea Nano, sebakeng sa prototyping ea lesoba, pro e tlase.file Nano socket connector, le masoba a ntseng a hola bakeng sa ho kopanngoa habonolo mererong.
Likaroloana
- Lihokelo tsa Screw: Lihokelo tse 30 tsa screw tse pepesang lithapo tsohle tsa I/O, lihokelo tse 2 tsa screw tse fanang ka likhokahano tse ling tsa fatše.
- Ka lesoba: 9 × 8 ka-hole prototyping sebakeng seo
- Nano socket: Pro e tlasefile sehokedi bakeng sa botsitso bo phahameng ba mochini
- Mount Holes: 4x 3.2mm masoba bakeng sa ho kopanya habonolo
Litaelo tsa Tšebeliso ea Sehlahisoa
Adapter
Nano Screw Terminal Adapter e loketse basebelisi ba Arduino ba batlang tsela e potlakileng le e bonolo ea ho aha merero e matla le ho eketsa lipotoloho tse nyane ntle le ho soasoa.
Liboto tse lumellanang
Lethathamo la liboto tse tsamaellanang le SKU ea tsona le voltage ranges.
Kopo Examples
- Moralo oa Mokhanni oa Likoloi: Lekola bakhanni ba makoloi le lipotoloho tse ling sebakeng sa prototyping
- Ho lokisa bothata ka ntle: Fumana li-Nano pins tse tloaelehileng ka lihlooho tsa phini kapa li-terminals tsa screw bakeng sa matšoao a ho hlahloba.
- Nts'etsopele ea tharollo e potlakileng: Hokela ho potoloho ea kantle bakeng sa tlhahlobo ea mehopolo e potlakileng le li-circuits tsa prototype
E sebetsa hapeview
Board Topology
Lintlha tse qaqileng tsa topology ea boto ho kenyelletsa likarolo tse holimo le tse tlase.
Lihlooho
Boto e pepesa lihokelo tse peli tsa 15-pin tse nang le mesebetsi e thathamisitsoeng bakeng sa phini ka 'ngoe. Lihokelo tsena li ka bokelloa ka lihlooho tsa phini kapa tsa rekisoa ka li-vias tsa castelated.
Tlhaloso
Arduino® Nano Screw Terminal Adapter ke tharollo e potlakileng, e sireletsehileng le e se nang thekiso bakeng sa morero oa hau o latelang oa Nano. Hokela habonolo likhokahano tsa kantle ho li-screw terminals 'me u sebelise sebaka sa prototyping sa onboard ho lekola mehopolo le litharollo. Fetola habonolo lipakeng tsa liboto tse fapaneng tsa malapa a Nano ntle le ho soasoa, ha u ntse u siea morero oohle oa hau o ntse o le teng.
Libaka tse reriloeng:
Moetsi, merero ea Nano, Prototyping,
Likaroloana
Lihokelo tsa screw
- Lihokelo tse 30 tsa screw tse pepesang lithakhisa tsohle tsa I/O ho tsoa botong ea hau ea Nano
- Lihokelo tse 2 tsa screw tse fanang ka likhokahano tse eketsehileng tsa fatše
- Silika e ngotsoe hore e sebelisoe kapele le ha bonolo
Ka lesoba
- 9 × 8 ka sebaka sa prototyping ea lesoba
Nano socket
- Sehokelo sa boemo bo tlase bakeng sa botsitso bo phahameng ba mochini
- Lithako tsohle li fumaneha ka likoti tse tloaelehileng tsa boardboard
Mount Holes
- 4x 3.2mm ⌀ masoba
- Ho kopanya habonolo mererong ea hau
Adapter
Joalokaha ho ile ha fumaneha hore basebelisi ba Arduino ba na le tlhokahalo ea mokhoa o potlakileng le o bonolo oa ho haha meralo ka mokhoa o sireletsehileng hammoho le ho eketsa lipotoloho tse nyenyane bakeng sa taolo e eketsehileng, Nano Screw Terminal Adapter e ile ea ntlafatsoa ho thusa ho aha merero e joalo e matla, ntle le tlhokahalo ea soldering. .
Liboto tse lumellanang
| Lebitso la sehlahisoa | SKU | Min voltage | Max voltage |
| Arduino® Nano 33 IoT | ABX00027/ABX00032 | 5 V | 18 V |
| Arduino® Nano 33 BLE Sense | ABX00031/ABX00035 | 5 V | 18 V |
| Arduino® Nano BLE | ABX00030/ABX00028 | 5 V | 18 V |
| Arduino® Nano E 'ngoe le e 'ngoe | ABX00033/ABX00028 | 5 V | 18 V |
| Arduino® Nano RP2040 hokela | ABX00052/ABX00053 | 5 V | 18 V |
| Arduino® Nano E 'ngoe le e 'ngoe | ABX00033/ABX00028 | 7 V | 18 V |
| Arduino® Nano | A000005 | 7 V | 12 V |
| Hlokomela! Ka kopo, sheba leqephe la boto e 'ngoe le e 'ngoe bakeng sa lintlha tse ling mabapi le matla le bokhoni ba bona. |
Kopo Examples
- Moralo oa Mokhanni oa Likoloi: Lekola bakhanni ba likoloi le lipotoloho tse ling tse nyane sebakeng sa prototyping
- Tharollo ea kantle: Lithakhisa tsohle tse tloaelehileng tsa Nano li fumaneha ka lihlooho tsa li-pin tse lumellanang le li-screw terminals. Sena se lumella ho hlahlojoa ka ho toba ha matšoao ka multimeter kapa oscilloscope ha sesebelisoa se ntse se sebetsa.
- Ntlafatso ea tharollo e potlakileng: Hokela kapele ho li-circuitry tsa kantle ka lihlooho tsa phini kapa li-screw terminals ho lekola mehopolo e mecha kapele. Li-circuits tsa prototype ka potlako 'me u lekole liboto tse fapaneng tsa Nano ho khetha khetho e ntle ka ho fetisisa bakeng sa ts'ebeliso ea hau.
E sebetsa hapeview
Board Topology
Holimo
| Ref. | Tlhaloso | Ref. | Tlhaloso |
| J17 | HLE-115-02-F-DV-Footprint-2 | J19 | HLE-115-02-F-DV-Footprint-2 |
| J18 | KHONKETSO MORS.CS16v | J20 | KHONKETSO MORS.CS 16v |
Tlase
Lihlooho
Boto e pepesa lihokelo tse peli tsa phini tse 15 tse ka bokelloang ka lihlooho tsa phini kapa tsa rekisoa ka li-vias tse khabisitsoeng.
Sehokelo J17
| Pin | Mosebetsi | Mofuta | Tlhaloso |
| 1 | D13/SCK | Dijithale | GPIO |
| 2 | +3V3 | Tlosa Matla | |
| 3 | AREF | Analoge | Tlhaloso ea Analog; e ka sebelisoa e le GPIO |
| 4 | A0/DAC0 | Analoge | ADC in/DAC tsoa; e ka sebelisoa e le GPIO |
| 5 | A1 | Analoge | ADC ka; e ka sebelisoa e le GPIO |
| 6 | A2 | Analoge | ADC ka; e ka sebelisoa e le GPIO |
| 7 | A3 | Analoge | ADC ka; e ka sebelisoa e le GPIO |
| 8 | A4/SDA | Analoge | ADC ka; I2C SDA; E ka sebelisoa e le GPIO (1) |
| 9 | A5/SCL | Analoge | ADC ka; I2C SCL; E ka sebelisoa e le GPIO (1) |
| 10 | A6 | Analoge | ADC ka; e ka sebelisoa e le GPIO |
| 11 | A7 | Analoge | ADC ka; e ka sebelisoa e le GPIO |
| 12 | VUSB | Matla ka hare/Kantle | Ka tloaelo NC; e ka hokela ho VUSB phini ea sehokelo sa USB ka ho khutsufatsa jumper |
| 13 | RST | Digital In | Kenyo e sebetsang e tlase ea ho seta bocha (kopi ea phini ea 18) |
| 14 | GND | Matla | Sebaka sa Matla |
| 15 | VIN | Power In | Ho kenya Matla a Vin |
| 16 | TX | Dijithale | UART TX; e ka sebelisoa e le GPIO |
| 17 | RX | Dijithale | UART RX; e ka sebelisoa e le GPIO |
| 18 | RST | Dijithale | Kenyo e sebetsang e tlase ea ho seta bocha (kopi ea phini ea 13) |
| 19 | GND | Matla | Sebaka sa Matla |
| 20 | D2 | Dijithale | GPIO |
| 21 | D3 | Dijithale | GPIO |
| 22 | D4 | Dijithale | GPIO |
| 23 | D5 | Dijithale | GPIO |
| 24 | D6 | Dijithale | GPIO |
| 25 | D7 | Dijithale | GPIO |
| 26 | D8 | Dijithale | GPIO |
| 27 | D9 | Dijithale | GPIO |
| 28 | D10 | Dijithale | GPIO |
| 29 | D11/MOSI | Dijithale | SPI MOSI; e ka sebelisoa e le GPIO |
| 30 | D12/MISO | Dijithale | SPI MISO; e ka sebelisoa e le GPIO |
Boitsebiso ba Mechini
Kemiso ea Boto le Likoti tse Homang
Setifikeiti
Declaration of Conformity CE DoC (EU)
Re phatlalatsa tlas'a boikarabelo ba rona hore lihlahisoa tse ka holimo li lumellana le litlhoko tsa bohlokoa tsa Litaelo tse latelang tsa EU 'me kahoo re tšoaneleha bakeng sa ho tsamaea ka bolokolohi ka har'a limmaraka tse kenyeletsang European Union (EU) le European Economic Area (EEA).
Phatlalatso ea Tumellano le EU RoHS & REACH 211 01/19/2021
Liboto tsa Arduino li lumellana le RoHS 2 Directive 2011/65/EU ea Paramente ea Europe le RoHS 3 Directive 2015/863/EU ea Lekhotla la 4 Phuptjane 2015 mabapi le thibelo ea tšebeliso ea lintho tse ling tse kotsi ho lisebelisoa tsa motlakase le tsa elektroniki.
| Ntho | Bolelele ba moeli (ppm) |
| Lebisa (Pb) | 1000 |
| Cadmium (Cd) | 100 |
| Motsoako (Hg) | 1000 |
| Hexavalent Chromium (Cr6+) | 1000 |
| Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis(2-Ethylhexyl} phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Litokoloho : Ha ho litokollo tse batloang.
- Arduino Boards e lumellana ka botlalo le litlhoko tse amanang le European Union Regulation (EC) 1907 /2006 mabapi le Ngoliso, Tlhahlobo, Tumello le Thibelo ea Lik'hemik'hale (REACH). Ha re phatlalatse hore ha ho le e 'ngoe ea SVHCs (https://echa.europa.eu/web/guest/candidate-list-table), Lethathamo la Bakhethoa ba Matšoenyeho a Holimo Haholo bakeng sa tumello e lokollotsoeng hajoale ke ECHA, le teng lihlahisoang tsohle (le sephutheloana) ka bongata bo boholo bo lekanang kapa bo kaholimo ho 0.1%. Ho ea ka tsebo ea rona, re boetse re phatlalatsa hore lihlahisoa tsa rona ha li na letho la lintho tse thathamisitsoeng ho "Authorization List" (Annex XIV ea melaoana ea REACH) le Lintho tsa
- Matšoenyeho a Phahameng haholo (SVHC) ka chelete efe kapa efe ea bohlokoa joalo ka ha ho boletsoe ke Annex XVII ea lenane la Bakhethoa le phatlalalitsoeng ke ECHA (European Chemical Agency) 1907 /2006/EC.
Phatlalatso ea Liminerale tsa Khohlano
- Joaloka mofani oa lefats'e oa lisebelisoa tsa elektroniki le tsa motlakase, Arduino e tseba boitlamo ba rona mabapi le melao le melaoana e mabapi le Conflict Minerals, haholoholo Dodd-Frank Wall Street Reform and Consumer.
- Molao oa Tšireletso, Karolo ea 1502. Arduino ha e hlahise ka ho toba kapa ha e sebetsane le liminerale tse loantšanang tse kang Tin, Tantalum, Tungsten, kapa Khauta. Liminerale tse loantšanang li fumaneha lihlahisoa tsa rona ka mokhoa oa solder, kapa e le karolo ea li-alloys tsa tšepe. E le karolo ea boikitlaetso ba rona bo loketseng, Arduino e ikopanye le bafani ba thepa ka har'a ketane ea rona ea phepelo ho netefatsa hore ba tsoela pele ho latela melaoana. Ho ipapisitsoe le tlhaiso-leseling eo re e fumaneng ho tla fihlela joale, re phatlalatsa hore lihlahisoa tsa rona li na le Liminerale tsa Conflict tse tsoang libakeng tse se nang likhohlano.
FCC Tlhokomeliso
- Liphetoho life kapa life tse sa amoheloeng ka kotloloho ke mokha o ikarabellang bakeng sa tsamaiso li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa.
- Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
- Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi
- sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.
- Polelo ea Ts'oaetso ea Mahlaseli a FCC RF:
- Transmitter ena ha ea lokela ho ba sebakeng se le seng kapa ho sebetsa mmoho le antenna efe kapa efe kapa transmitter.
- Sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a RF e behiloeng bakeng sa tikoloho e sa laoleheng.
- Thepa ena e lokela ho kengoa le ho sebetsoa ka sebaka sa bonyane 20cm lipakeng tsa radiator le 'mele oa hau.
Sesotho: Libukana tsa mosebelisi bakeng sa lisebelisoa tsa radio tse sa lumelloeng ke laesense li tla ba le tsebiso e latelang kapa e ts'oanang sebakeng se hlakileng bukeng ea mosebelisi kapa sesebelisoa kapa ka bobeli. Sesebediswa sena se dumellana le ditekanyetso tsa RSS tse sa dumelleng laesense ya Industry Canada. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
- sesebelisoa sena se ka 'na sa se ke sa baka tšitiso
- sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng ea sesebelisoa.
Tlhokomeliso ea IC SAR:
Thepa ena e lokela ho kenngoa le ho sebetsoa ka sebaka se ka tlase ho 20 cm pakeng tsa radiator le 'mele oa hau.
Bohlokoa: Thempereichara ea ts'ebetso ea EUT e ke ke ea feta 85 ℃ mme ha ea lokela ho ba ka tlase ho -40 ℃.
Ka hona, Arduino Srl e phatlalatsa hore sehlahisoa sena se lumellana le litlhoko tsa bohlokoa le lipehelo tse ling tse amehang tsa Directive 2014/53/EU. Sehlahisoa sena se lumelletsoe ho sebelisoa linaheng tsohle tsa litho tsa EU.
Lintlha tsa Khampani
| Lebitso la K'hamphani | Arduino Srl |
| Aterese ea Khampani | Via Andrea Appiani 25 20900 MONZA Italy |
Nalane ea Phetoho
| Letsatsi | Khatiso | Liphetoho |
| 17/06/2022 | 1 | Tokollo ea pele |
Arduino® Nano Screw Terminal Adapter
FAQS
P: Na nka sebelisa adaptara ee le liboto tse ling tsa Nano tse sa thathamisoang karolong ea liboto tse lumellanang?
A: Ho khothalletsoa ho sebelisa adaptara ena e nang le liboto tse thathamisitsoeng tse lumellanang ho netefatsa ts'ebetso e nepahetseng le ho lumellana.
P: Na masoba a hoketsoang a loketse li-screws tse tloaelehileng?
A: E, masoba a 3.2mm a hloekisitsoeng a etselitsoe ho kopanngoa habonolo mererong e fapaneng ho sebelisoa li-screws tse tloaelehileng.
Litokomane / Lisebelisoa
 |
Arduino ASX00037 Nano Screw Terminal Adapter [pdf] Buka ea Mong'a ASX00037 Nano Screw Terminal Adapter, ASX00037, Nano Screw Terminal Adapter, Terminal Adapter, Adapter |
 |
Arduino ASX00037 Nano Screw Terminal Adapter [pdf] Buka ea Mong'a ASX00037, ASX00037-3P, ASX00037 Nano Screw Terminal Adapter, ASX00037, Nano Screw Terminal Adapter, Terminal Adapter, Adapter |