Arduino-LOGOArduino ASX00037 Nano Screw Terminal Adapter

 Arduino-ASX00037-Nano-Screw-Terminal-Adapter-PRODUCT

Specifications

  • Product Reference Manual SKU: ASX00037_ASX00037-3P
  • Target Areas: Maker, Nano projects, Prototyping

Product Information
This Nano Screw Terminal Adapter is designed to securely build projects and add small circuits for extra control without the need for soldering. It features screw connectors exposing all I/O pins from your Nano board, through hole prototyping area, low profile Nano socket connector, and mounting holes for easy integration into projects.

Features

  • Screw connectors: 30 screw connectors exposing all I/O pins, 2 screw connectors providing additional ground connections
  • Through hole: 9×8 through-hole prototyping area
  • Nano socket: Low profile connector for high mechanical stability
  • Mounting Holes: 4x 3.2mm holes for easy integration

Product Usage Instructions

The Adapter
The Nano Screw Terminal Adapter is ideal for Arduino users looking for a quick and easy way to build robust projects and add small circuits without soldering.

Compatible Boards
List of compatible boards with their respective SKU and voltage ranges.

Application Examples

  • Motor Driver Design: Evaluate motor drivers and other circuits on the prototyping area
  • External debugging: Access standard Nano pins via pin headers or screw terminals for probing signals
  • Rapid solution development: Connect to external circuitry for quick idea evaluation and prototype circuits

Functional Overview

Board Topology
Detailed information on the board topology including top and bottom components.

Headers
The board exposes two 15-pin connectors with functions listed for each pin. These connectors can be assembled with pin headers or soldered through castellated vias.

Description
Arduino® Nano Screw Terminal Adapter is a quick, secure and solderless solution for your next Nano project. Easily connect external connections to the screw terminals and use the onboard prototyping area to evaluate ideas and solutions. Easily switch between the various Nano family boards without soldering, while leaving the rest of your project intact.

Target areas:
Maker, Nano projects, Prototyping,

Features

Screw connectors

  • 30 screw connectors exposing all I/O pins from your Nano board
  • 2 screw connectors providing additional ground connections
  • Silk is labelled for quick and easy reference

Through hole

  • 9×8 through hole prototyping area

Nano socket

  • Low profile connector for high mechanical stability
  • All pins are accessible via standard breadboard holes

Mounting Holes

  • 4x 3.2mm ⌀ holes
  • Easy integration into your own projects

The Adapter
As it turned out that Arduino users have a need of a quick and easy way to securely build projects as well as adding small circuits for extra control, the Nano Screw Terminal Adapter was developed to assist in building such robust projects, without the need of soldering.

Compatible boards

Product name SKU Min voltage Max voltage
Arduino® Nano 33 IoT ABX00027/ABX00032 5 V 18 V
Arduino® Nano 33 BLE Sense ABX00031/ABX00035 5 V 18 V
Arduino® Nano BLE ABX00030/ABX00028 5 V 18 V
Arduino® Nano Every ABX00033/ABX00028 5 V 18 V
Arduino® Nano RP2040 connect ABX00052/ABX00053 5 V 18 V
Arduino® Nano Every ABX00033/ABX00028 7 V 18 V
Arduino® Nano A000005 7 V 12 V
Note! Please turn to each board’s datasheet for further information about power and their capacity.      

Application Examples

  • Motor Driver Design: Evaluate motor drivers and other smaller circuits on the prototyping area
  • External debugging: All the standard Nano pins are accessible via both breadboard compatible pin headers as well as the screw terminals. This allows for direct probing of signals via a multimeter or oscilloscope while the device is under operation.
  • Rapid solution development: Quickly connect to external circuitry with pin headers or screw terminals to evaluate new ideas quickly. Rapidly prototype circuits and evaluate various Nano boards to choose the best option for your application.

Functional Overview

Board Topology

Top

 Arduino-ASX00037-Nano-Screw-Terminal-Adapter-FIG- (1)

Ref. Description Ref. Description
J17 HLE-115-02-F-DV-Footprint-2 J19 HLE-115-02-F-DV-Footprint-2
J18 CONNECTOR MORS.CS16v J20 CONNECTOR MORS.CS 16v

Bottom

 Arduino-ASX00037-Nano-Screw-Terminal-Adapter-FIG- (2)

Headers
The board exposes two 15 pin connectors which can either be assembled with pin headers or soldered through castellated vias.

Connector J17

Pin Function Type Description
1 D13/SCK Digital GPIO
2 +3V3 Power Out  
3 AREF Analog Analog Reference; can be used as GPIO
4 A0/DAC0 Analog ADC in/DAC out; can be used as GPIO
5 A1 Analog ADC in; can be used as GPIO
6 A2 Analog ADC in; can be used as GPIO
7 A3 Analog ADC in; can be used as GPIO
8 A4/SDA Analog ADC in; I2C SDA; Can be used as GPIO (1)
9 A5/SCL Analog ADC in; I2C SCL; Can be used as GPIO (1)
10 A6 Analog ADC in; can be used as GPIO
11 A7 Analog ADC in; can be used as GPIO
12 VUSB Power In/Out Normally NC; can be connected to VUSB pin of the USB connector by shorting a jumper
13 RST Digital In Active low reset input (duplicate of pin 18)
14 GND Power Power Ground
15 VIN Power In Vin Power input
16 TX Digital USART TX; can be used as GPIO
17 RX Digital USART RX; can be used as GPIO
18 RST Digital Active low reset input (duplicate of pin 13)
19 GND Power Power Ground
20 D2 Digital GPIO
21 D3 Digital GPIO
22 D4 Digital GPIO
23 D5 Digital GPIO
24 D6 Digital GPIO
25 D7 Digital GPIO
26 D8 Digital GPIO
27 D9 Digital GPIO
28 D10 Digital GPIO
29 D11/MOSI Digital SPI MOSI; can be used as GPIO
30 D12/MISO Digital SPI MISO; can be used as GPIO

Mechanical Information

Board Outline and Mounting Holes

 Arduino-ASX00037-Nano-Screw-Terminal-Adapter-FIG- (3)

Certifications

Declaration of Conformity CE DoC (EU)
We declare under our sole responsibility that the products above are in conformity with the essential requirements of the following EU Directives and therefore qualify for free movement within markets comprising the European Union (EU) and European Economic Area (EEA).

Declaration of Conformity to EU RoHS & REACH 211 01/19/2021
Arduino boards are in compliance with RoHS 2 Directive 2011/65/EU of the European Parliament and RoHS 3 Directive 2015/863/EU of the Council of 4 June 2015 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Substance Maximum limit (ppm)
Lead (Pb) 1000
Cadmium (Cd) 100
Mercury (Hg) 1000
Hexavalent Chromium (Cr6+) 1000
Poly Brominated Biphenyls (PBB) 1000
Poly Brominated Diphenyl ethers (PBDE) 1000
Bis(2-Ethylhexyl} phthalate (DEHP) 1000
Benzyl butyl phthalate (BBP) 1000
Dibutyl phthalate (DBP) 1000
Diisobutyl phthalate (DIBP) 1000

Exemptions : No exemptions are claimed.

  • Arduino Boards are fully compliant with the related requirements of European Union Regulation (EC) 1907 /2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH). We declare none of the SVHCs (https://echa.europa.eu/web/guest/candidate-list-table), the Candidate List of Substances of Very High Concern for authorization currently released by ECHA, is present in all products (and also package) in quantities totaling in a concentration equal or above 0.1%. To the best of our knowledge, we also declare that our products do not contain any of the substances listed on the “Authorization List” (Annex XIV of the REACH regulations) and Substances of
  • Very High Concern (SVHC) in any significant amounts as specified by the Annex XVII of Candidate list published by ECHA (European Chemical Agency) 1907 /2006/EC.

Conflict Minerals Declaration

  • As a global supplier of electronic and electrical components, Arduino is aware of our obligations with regards to laws and regulations regarding Conflict Minerals, specifically the Dodd-Frank Wall Street Reform and Consumer
  • Protection Act, Section 1502. Arduino does not directly source or process conflict minerals such as Tin, Tantalum, Tungsten, or Gold. Conflict minerals are contained in our products in the form of solder, or as a component in metal alloys. As part of our reasonable due diligence Arduino has contacted component suppliers within our supply chain to verify their continued compliance with the regulations. Based on the information received thus far we declare that our products contain Conflict Minerals sourced from conflict-free areas.

FCC Caution

  • Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  • This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
    1. This device may not cause harmful interference
    2. this device must accept any interference received, including interference that may cause undesired operation.
  • FCC RF Radiation Exposure Statement:
    • This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
    • This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
    • This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

English: User manuals for license-exempt radio apparatus shall contain the following or equivalent notice in a conspicuous location in the user manual or alternatively on the device or both. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. this device may not cause interference
  2. this device must accept any interference, including interference that may cause undesired operation of the device.

IC SAR Warning:
This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.

Important: The operating temperature of the EUT can’t exceed 85℃ and shouldn’t be lower than -40℃.
Hereby, Arduino S.r.l. declares that this product complies with essential requirements and other relevant provisions of Directive 2014/53/EU. This product is allowed to be used in all EU member states.

Company Information

Company name Arduino S.r.l
Company Address Via Andrea Appiani 25 20900 MONZA Italy

Revision History

Date Revision Changes
17/06/2022 1 First release

Arduino® Nano Screw Terminal Adapter

FAQS

Q: Can I use this adapter with other Nano boards not listed in the compatible boards section?
A: It is recommended to use this adapter with the listed compatible boards to ensure proper functionality and compatibility.

Q: Are the mounting holes suitable for standard screws?
A: Yes, the 3.2mm mounting holes are designed for easy integration into various projects using standard screws.

Documents / Resources

Arduino ASX00037 Nano Screw Terminal Adapter [pdf] Owner's Manual
ASX00037 Nano Screw Terminal Adapter, ASX00037, Nano Screw Terminal Adapter, Terminal Adapter, Adapter
Arduino ASX00037 Nano Screw Terminal Adapter [pdf] Owner's Manual
ASX00037, ASX00037-3P, ASX00037 Nano Screw Terminal Adapter, ASX00037, Nano Screw Terminal Adapter, Terminal Adapter, Adapter

References

Leave a comment

Your email address will not be published. Required fields are marked *