Arduino ABX00071 Nano 33 BLE Module
Litlhaloso
- Lebitso la Sehlahiswa: Arduino Nano 33 BLE Rev2
- SKU: EA-00071-ABX
- Motlakase: Cortex M4F e thehiloe ho Nordic nRF52480
- IMU: BMI270 6-axis IMU (Accelerometer le Gyroscope), BMM150 3-axis IMU (Magnetometer)
- Khokahano e se nang mohala: NINA B306 Module e nang le IEEE 802.15.4 tšehetso ea seea-le-moea, Thread, Zigbee
- DC-DC Regulator: MP2322, tlhahiso ea voltage fihla ho 21V, e sebetsa hantle ho feta 85% @12V
Litaelo tsa Tšebeliso ea Sehlahisoa
Ts'ebetso ea Boto
Ho qala ka Arduino Nano 33 BLE Rev2, latela mehato ena:
- IDE: Qala ka ho theha Tikoloho ea hau e Kopanetsoeng ea Ntlafatso (IDE).
- Arduino Web Mohlophisi: Ntle le moo, o ka sebelisa Arduino Web Mohlophisi oa mananeo.
- Arduino IoT Cloud: Lekola likhetho tsa khokahano ea leru bakeng sa merero ea hau ea IoT.
- Sample Sketches: Fumana likheche tse entsoeng esale pele bakeng sa liteko le ho ithuta kapele.
- Lisebelisoa tsa Marang-rang: Sheba litokomane tsa inthaneteng le liforamu tsa sechaba bakeng sa tšehetso.
- Ho Khutlisa Boto: Haeba ho na le mathata afe kapa afe, ithute ho khutlisa boto ea hau.
Sehokedi Pinouts
Utloisisa lihokelo tse fapaneng tse botong:
- USB: Sebelisa khokahano ea USB bakeng sa ho etsa mananeo le matla.
- Lihlooho: Hokela lisebelisoa kapa likarolo tsa kantle ho sebelisa lihlooho.
- Debug: Sebelisa port debug ho rarolla mathata le ho beha leihlo.
Boitsebiso ba Mechini
- Ithute ka litlhaloso tsa 'mele tsa boto:
- Lethathamo la Boto: Utloisisa litekanyo le likoti tse ntseng li eketseha tsa boto.
LBH
- Q: A na nka sebelisa matšoao a 5V ka Arduino Nano 33 BLE Rev2?
- A: Che, boto e tšehetsa 3.3VI/Os feela 'me ha e mamelle 5V. Ho hokela matshwao a 5V ka kotloloho ho ka senya boto.
- Q: Ke matlafatsa Arduino Nano 33 BLE Rev2 joang?
- A: O ka matlafatsa boto ka USB kapa lihlooho. Boto ha e na tjhaja ea betri e hahelletsoeng kahare.
Tlhaloso
Arduino Nano 33 BLE Rev2* ke mojule oa boholo bo nyane o nang le mojule oa NINA B306, o thehiloeng ho Nordic nRF52480 mme o na le Cortex M4F. BMI270 le BMM150 ka kopanelo li fana ka IMU ea 9-axis. Mojule o ka hlongoa joalo ka karolo ea DIP (ha o kenya lihlooho tsa pin) kapa joalo ka karolo ea SMT, o e kopanya ka kotloloho ka lipampiri tse nang le li-castelated.
Sehlahisoa sa Arduino Nano 33 BLE Rev2 se na le li-SKU tse peli:
- Ntle le lihlooho (ABX00071)
- Ka lihlooho (ABX00072)
Libaka tse reriloeng
- Moetsi, lintlafatso, ts'ebeliso ea IoT
Likaroloana
NINA B306 Module
- processor
- 64 MHz Arm® Cortex®-M4F (ka FPU)
- 1 MB Flash + 256 KB RAM
Bluetooth® 5 radio multiprotocol
- 2 Mbps
- CSA #2
- Advertising Extensions
- Nako e telele
- +8 dBm TX matla
- -95 dBm kutloisiso
- 4.8 mA ho TX (0 dBm)
- 4.6 mA ho RX (1 Mbps)
- Balun e kopantsoeng e nang le 50 Ω e phethiloeng e le 'ngoe
- IEEE 802.15.4 tšehetso ea seea-le-moea
- Khoele
- Zigbee
Pheripherals
- Lebelo le felletseng la 12 Mbps USB
- NFC-A tag
- Setsi sa ts'ireletso sa Arm CryptoCell CC310
- QSPI/SPI/TWI/I²S/PDM/QDEC
- Lebelo le phahameng la 32 MHz SPI
- Quad SPI interface 32 MHz
- EasyDMA bakeng sa lihokelo tsohle tsa dijithale
- 12-bit 200 ksps ADC
- 128-bit AES/ECB/CCM/AAR co-processor
BMI270 6-axis IMU (Accelerometer le Gyroscope)
- 16-bit
- 3-axis accelerometer e nang le ±2g/±4g/±8g/±16g range
- 3-axis gyroscope e nang le ±125dps/±250dps/±500dps/±1000dps/±2000dps range
BMM150 3-axis IMU (Magnetometer)
- 3-axis digital geomagnetic sensor
- 0.3μT qeto
- ±1300μT (x,y-axis), ±2500μT (z-axis)
MP2322 DC-DC
- E laola tlhahiso ea molumotage ho tloha ho 21V ka bonyane ba 65% e sebetsang hantle @minimum load
- Ho feta 85% e sebetsang hantle @12V
Boto
Joalo ka liboto tsohle tsa Nano form factor, Nano 33 BLE Rev2 ha e na tjhaja ea betri empa e ka tsamaisoa ka USB kapa lihlooho.
HLOKOMELA: Arduino Nano 33 BLE Rev2 e ts'ehetsa 3.3VI/Os feela 'me HA E mamelle 5V kahoo ka kopo etsa bonnete ba hore ha o hokele matšoao a 5V ka kotloloho botong ena kapa e tla senyeha. Hape, ho fapana le liboto tsa Arduino Nano tse tšehetsang ts'ebetso ea 5V, pinana ea 5V HA E fane ka vol.tage empa ho e-na le hoo e hokahane, ka jumper, ho kenya matla a USB.
Lintlha
Maemo a Tšebetso a khothalelitsoeng
| Letšoao | Tlhaloso | Min | Max |
| Meeli ea mocheso oa Conservative bakeng sa boto kaofela: | -40 °C (40 °F) | 85°C ( 185 °F) |
Tšebeliso ea Matla
| Letšoao | Tlhaloso | Min | Tlanya | Max | Yuniti |
| PBL | Tšebeliso ea matla e nang le loop e phathahaneng | TBC | mW | ||
| PLP | Tšebeliso ea matla ka mokhoa o fokolang oa matla | TBC | mW | ||
| PMAX | Tšebeliso e Felletseng ea Matla | TBC | mW |
E sebetsa hapeview
Board Topology
Holimo
| Ref. | Tlhaloso | Ref. | Tlhaloso |
| U1 | NINA-B306 Mojule Bluetooth® Low Energy 5.0 Mojule | U6 | MP2322GQH Step Down Converter |
| U2 | BMI270 Sensor IMU | PB1 | IT-1185AP1C-160G-GTR Konopo ea ho sututsa |
| U7 | Tlhaloso: BMM150 Magnetometer IC | DL1 | Led L |
Tlase
| Ref. | Tlhaloso | Ref. | Tlhaloso |
| SJ1 | VUSB jumper | SJ2 | D7 Jumper |
| Ref. | Tlhaloso | Ref. | Tlhaloso |
| SJ3 | 3v3 Jumper | SJ4 | D8 Jumper |
processor
Main Processor ke Arm® Cortex®-M4F e sebetsang ho fihla ho 64MHz. Boholo ba lithakhisa tsa eona li hokahane le lihlooho tsa ka ntle leha ho le joalo tse ling li boloketsoe puisano ea ka hare le mohala o se nang mohala le li-peripherals tsa I2C tse ka hare (IMU le Crypto).
HLOKOMELA: Ho fapana le liboto tse ling tsa Arduino Nano, lithakhisa A4 le A5 li na le ho hula ka hare 'me li ka sebelisoa e le I2C Bus kahoo ha ho khothalletsoe ho sebelisoa e le lisebelisoa tsa analog.
IMU
Arduino Nano 33 BLE Rev2 e fana ka bokhoni ba IMU ka 9-axis, ka motsoako oa BMI270 le BMM150 ICs. BMI270 e kenyelletsa gyroscope ea li-axis tse tharo hammoho le accelerometer ea li-axis tse tharo, ha BMM150 e khona ho lemoha phapang ea matla a khoheli likarolong tsohle tse tharo. Lintlha tse fumanoeng li ka sebelisoa bakeng sa ho lekanya mekhahlelo e tala ea motsamao hammoho le ho ithuta ka mochini.
Sefate sa Matla
Boto e ka tsamaisoa ka sehokelo sa USB, VIN kapa VUSB lithareng.
HLOKOMELA: Kaha VUSB e fepa VIN ka Schottky diode le molaoli oa DC-DC o boletse bonyane ba matla a ho kenya.tage ke 4.5V bonyane ba phepelo ea matlatage ho tloha ho USB e tlameha ho eketseha ho ea ho voltage sebakeng se pakeng tsa 4.8V le 4.96V ho itšetlehile ka se huloang hona joale.
Setšoantšo se Thibeloang
Ts'ebetso ea Boto
Ho qala - IDE
Haeba u batla ho hlophisa Arduino Nano 33 BLE Rev2 ha u ntse u le sieo inthaneteng u hloka ho kenya Arduino Desktop IDE [1] Ho hokela Arduino Nano 33 BLE Rev2 komporong ea hau, u tla hloka thapo ea Micro-B ea USB. Sena se boetse se fana ka matla ho boto, joalokaha ho bontšitsoe ke LED.
Ho qala - Arduino Web Mohlophisi
- Liboto tsohle tsa Arduino, ho kenyeletsoa le ena, li sebetsa ka ntle ho lebokose la Arduino Web Editor, ka ho kenya feela plugin e bonolo.
- Arduino Web Editor e tsamaisoa inthaneteng, ka hona e tla lula e le morao-rao ka likarolo tsa morao-rao le tšehetso bakeng sa liboto tsohle. Latela ho qala ho kenya likhoutu ho sebatli le ho kenya litšoantšo tsa hau botong ea hau.
Ho qala - Arduino IoT Cloud
Lihlahisoa tsohle tse nolofalitsoeng ke Arduino IoT li tšehetsoa ho Arduino IoT Cloud e u lumellang hore u kene, u kenye le ho sekaseka lintlha tsa sensor, ho qala liketsahalo, le ho iketsetsa ntlo kapa khoebo ea hau.
Sample Sketches
Sample sekeche sa Arduino Nano 33 BLE Rev2 se ka fumanoa ho "Examples" ho Arduino IDE kapa karolong ea "Documentation" ea Arduino Pro websebaka.
Lisebelisoa tsa Marang-rang
Kaha joale u se u fetile linthong tsa motheo tsa seo u ka se etsang ka boto u ka hlahloba menyetla e sa feleng eo e fanang ka eona ka ho hlahloba merero e thabisang ho ProjectHub, Arduino Library Reference le lebenkele la marang-rang moo u tla khona ho tlatsana le boto ea hau ka li-sensor. , li-actuator le tse ling.
Boto ea Pholiso
Liboto tsohle tsa Arduino li na le bootloader e hahelletsoeng ka hare e lumellang ho bonesa boto ka USB. Haeba sketch e notlela processor mme boto e se e sa fihlellehe ka USB, hoa khoneha ho kenya mokhoa oa bootloader ka ho tlanya habeli konopo ea reset hang ka mor'a ho matlafatsa boto.
Sehokedi Pinouts
USB
| Pin | Mosebetsi | Mofuta | Tlhaloso |
| 1 | VUSB | Matla | Phepelo ea Matla. Haeba boto e tsamaisoa ka VUSB ho tloha hloohong sena ke Output (1) |
| 2 | D- | Phapang | Lintlha tse fapaneng tsa USB - |
| 3 | D+ | Phapang | Lintlha tse fapaneng tsa USB + |
| 4 | ID | Analoge | Khetha tšebetso ea Host/Device |
| 5 | GND | Matla | Sebaka sa Matla |
Lihlooho
Boto e pepesa lihokelo tse peli tsa 15-pin tse ka kopanngoang ka lihlooho tsa phini kapa tsa rekisoa ka li-vias tse nang le li-castelated.
| Pin | Mosebetsi | Mofuta | Tlhaloso |
| 1 | D13 | Dijithale | GPIO |
| 2 | +3V3 | Tlosa Matla | Matla a hlahisoang ka hare ho lisebelisoa tsa kantle |
| 3 | AREF | Analoge | Tlhaloso ea Analog; e ka sebelisoa e le GPIO |
| 4 | A0/DAC0 | Analoge | ADC in/DAC tsoa; e ka sebelisoa e le GPIO |
| 5 | A1 | Analoge | ADC ka; e ka sebelisoa e le GPIO |
| 6 | A2 | Analoge | ADC ka; e ka sebelisoa e le GPIO |
| 7 | A3 | Analoge | ADC ka; e ka sebelisoa e le GPIO |
| 8 | A4/SDA | Analoge | ADC ka; I2C SDA; E ka sebelisoa e le GPIO (1) |
| 9 | A5/SCL | Analoge | ADC ka; I2C SCL; E ka sebelisoa e le GPIO (1) |
| 10 | A6 | Analoge | ADC ka; e ka sebelisoa e le GPIO |
| 11 | A7 | Analoge | ADC ka; e ka sebelisoa e le GPIO |
| 12 | VUSB | Matla ka hare/Kantle | Ka tloaelo NC; e ka hokela ho phini ea VUSB ea sehokelo sa USB ka ho khutsufatsa jumper |
| 13 | RST | Digital In | Kenyo e sebetsang e tlase ea ho seta bocha (kopi ea phini ea 18) |
| 14 | GND | Matla | Sebaka sa Matla |
| 15 | VIN | Power In | Ho kenya Matla a Vin |
| 16 | TX | Dijithale | UART TX; e ka sebelisoa e le GPIO |
| 17 | RX | Dijithale | UART RX; e ka sebelisoa e le GPIO |
| 18 | RST | Dijithale | Kenyo e sebetsang e tlase ea ho seta bocha (kopi ea phini ea 13) |
| 19 | GND | Matla | Sebaka sa Matla |
| 20 | D2 | Dijithale | GPIO |
| 21 | D3/PWM | Dijithale | GPIO; e ka sebelisoa e le PWM |
| 22 | D4 | Dijithale | GPIO |
| 23 | D5/PWM | Dijithale | GPIO; e ka sebelisoa e le PWM |
| 24 | D6/PWM | Dijithale | GPIO e ka sebelisoa e le PWM |
| 25 | D7 | Dijithale | GPIO |
| 26 | D8 | Dijithale | GPIO |
| 27 | D9/PWM | Dijithale | GPIO; e ka sebelisoa e le PWM |
| 28 | D10/PWM | Dijithale | GPIO; e ka sebelisoa e le PWM |
| 29 | D11/MOSI | Dijithale | SPI MOSI; e ka sebelisoa e le GPIO |
| 30 | D12/MISO | Dijithale | SPI MISO; e ka sebelisoa e le GPIO |
Hlakola
Ka lehlakoreng le ka tlase la boto, tlas'a mojule oa puisano, matšoao a debug a hlophisitsoe joalo ka lipampiri tsa liteko tsa 3 × 2 tse nang le 100 mil pitch e nang le pin 4 e tlositsoeng. Pin 1 e bonts'itsoe ho Setšoantšo sa 3 - Maemo a Sehokelo.
| Pin | Mosebetsi | Mofuta | Tlhaloso |
| 1 | +3V3 | Tlosa Matla | Matla a hlahisoang ka hare a tla sebelisoa e le voltage referense |
| 2 | SWD | Dijithale | nRF52480 data ea Single Wire Debug |
| 3 | SWCLK | Digital In | nRF52480 Single Wire Debug Clock |
| 5 | GND | Matla | Sebaka sa Matla |
| 6 | RST | Digital In | Kenyo e sebetsang e tlase ea ho seta bocha |
Boitsebiso ba Mechini
Kemiso ea Boto le Likoti tse Homang
Mehato ea boto e tsoakane pakeng tsa metric le imperial. Mehato ea borena e sebelisoa ho boloka 100 mil pitch grid pakeng tsa mela ea phini ho e lumella ho lekana le boto athe bolelele ba boto ke Metric.
Setifikeiti
Declaration of Conformity CE DoC (EU)
Re phatlalatsa tlas'a boikarabelo ba rona hore lihlahisoa tse ka holimo li lumellana le litlhoko tsa bohlokoa tsa Litaelo tse latelang tsa EU 'me kahoo li tšoaneleha bakeng sa ho tsamaea ka bolokolohi ka har'a limmaraka tse kenyeletsang European Union (EU) le European Economic Area (EEA).
Phatlalatso ea Tumellano le EU RoHS & REACH 211 01/19/2021
Liboto tsa Arduino li lumellana le RoHS 2 Directive 2011/65/EU ea Paramente ea Europe le RoHS 3 Directive 2015/863/EU ea Lekhotla la 4 Phuptjane 2015 mabapi le thibelo ea tšebeliso ea lintho tse ling tse kotsi ho lisebelisoa tsa motlakase le tsa elektroniki.
| Ntho | Bolelele ba moeli (ppm) |
| Lebisa (Pb) | 1000 |
| Cadmium (Cd) | 100 |
| Motsoako (Hg) | 1000 |
| Hexavalent Chromium (Cr6+) | 1000 |
| Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis(2-Ethylhexyl} phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Litokoloho: Ha ho litokollo tse batloang.
Arduino Boards e lumellana ka botlalo le litlhoko tse amanang le European Union Regulation (EC) 1907 /2006 mabapi le Ngoliso, Tlhahlobo, Tumello le Thibelo ea Lik'hemik'hale (REACH). Ha re phatlalatse hore ha ho le e 'ngoe ea SVHCs (https://echa.europa.eu/web/guest/candidate-list-table), Lethathamo la Bakhethoa ba Matšoenyeho a Holimo Haholo bakeng sa tumello e lokollotsoeng hajoale ke ECHA, le teng lihlahisoang tsohle (le sephutheloana) ka bongata bo boholo bo lekanang kapa bo kaholimo ho 0.1%. Ho latela tsebo ea rona, re boetse re phatlalatsa hore lihlahisoa tsa rona ha li na letho la lintho tse thathamisitsoeng ho "Authorization List" (Annex XIV ea melaoana ea REACH) le Substances of High Concern (SVHC) ka chelete efe kapa efe ea bohlokoa joalo ka ha ho boletsoe. ka Sehlomathiso sa XVII sa Lethathamo la Bakhethoa le hatisitsoeng ke ECHA (European Chemical Agency) 1907 /2006/EC.
Phatlalatso ea Liminerale tsa Khohlano
Joaloka mofani oa lefats'e oa likarolo tsa elektronike le motlakase, Arduino e tseba boitlamo ba rona mabapi le melao le melaoana e mabapi le Conflict Minerals, haholo-holo Dodd-Frank Wall Street Reform and Consumer Protection Act, Karolo ea 1502. Arduino ha e hlahise ka ho toba kapa ha e sebetsane le liminerale tsa likhohlano tse joalo. joalo ka Tin, Tantalum, Tungsten, kapa Khauta. Liminerale tsa likhohlano li fumaneha lihlahisoa tsa rona ka mokhoa oa solder kapa e le karolo ea li-alloys tsa tšepe. E le karolo ea boikitlaetso ba rona bo loketseng, Arduino e ikopanye le bafani ba thepa ka har'a ketane ea rona ea phepelo ho netefatsa hore ba tsoela pele ho latela melao. Ho latela lintlha tse fumanoeng ho tla fihlela joale, re phatlalatsa hore lihlahisoa tsa rona li na le Liminerale tsa Likhohlano tse tsoang libakeng tse se nang likhohlano.
TLHOKOMELO FCC
Liphetoho life kapa life tse sa amoheloeng ka kotloloho ke mokha o ikarabellang bakeng sa tumellano li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa.
Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
- Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi
- sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.
Tlhaloso ea Phaello ea Mahlaseli a FCC RF
- Transmitter ena ha ea lokela ho ba sebakeng se le seng kapa ho sebetsa mmoho le antenna efe kapa efe kapa transmitter.
- Sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a RF e behiloeng bakeng sa tikoloho e sa laoleheng.
- Thepa ena e lokela ho kenngoa le ho sebetsoa ka sebaka sa bonyane 20cm pakeng tsa radiator le 'mele oa hau.
Litaelo tsa mosebelisi bakeng sa lisebelisoa tsa seea-le-moea tse sa lumelloeng ke laesense li tla ba le tsebiso e latelang kapa e lekanang le eona sebakeng se hlahelletseng bukeng ea mosebelisi, ho fapana le sesebelisoa kapa ka bobeli. Sesebediswa sena se dumellana le ditekanyetso tsa RSS tse sa dumelleng laesense ya Industry Canada. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
- sesebelisoa sena se ka 'na sa se ke sa baka tšitiso
- sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng ea sesebelisoa.
Tlhokomeliso ea IC SAR
Thepa ena e lokela ho kenngoa le ho sebetsoa ka sebaka sa bonyane 20 cm pakeng tsa radiator le 'mele oa hau.
Bohlokoa: Thempereichara ea ts'ebetso ea EUT e ke ke ea feta 85 ℃ mme ha ea lokela ho ba ka tlase ho -40 ℃.
Ka hona, Arduino Srl e phatlalatsa hore sehlahisoa sena se lumellana le litlhoko tsa bohlokoa le lipehelo tse ling tse amehang tsa Directive 2014/53/EU. Sehlahisoa sena se lumelletsoe ho sebelisoa linaheng tsohle tsa litho tsa EU.
| Maqhubu a maqhubu | Matla a phahameng haholo (ERP) |
| 863-870Mhz | TBD |
Lintlha tsa Khampani
| Lebitso la K'hamphani | Arduino Srl |
| Aterese ea Khampani | Via Andrea Appiani 25 20900 MONZA Italy |
Litokomane Tsa Litšupiso
| Referense | Sehokelo |
| Arduino IDE (Desktop) | https://www.arduino.cc/en/software |
| Arduino IDE (Leru) | https://create.arduino.cc/editor |
| Cloud IDE Ho qala | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with-arduino-web- editor-4b3e4a |
| Foramo | http://forum.arduino.cc/ |
| Kena B306 | https://content.u-blox.com/sites/default/files/NINA-B3_DataSheet_UBX-17052099.pdf |
| ProjectHub | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| Reference Library | https://www.arduino.cc/reference/en/ |
Nalane ea Phetoho
| Letsatsi | Khatiso | Liphetoho |
Litokomane / Lisebelisoa
 |
Arduino ABX00071 Nano 33 BLE Module [pdf] Bukana ea Mosebelisi ABX00071 Nano 33 BLE Module, ABX00071, Nano 33 BLE Module, BLE Module, Module |