Setšoantšo sa AOC CU34G2 LCD
Polokeho
Likopano tsa Naha
- Likaroloana tse latelang li hlalosa litumellano tsa notation tse sebelisitsoeng tokomaneng ena.
Lintlha, Litemoso, le Litemoso
- Tataisong ena kaofela, liboloko tsa mongolo li ka tsamaea le aekhone ebe li hatisoa ka mongolo o motenya kapa ka mongolo o tšekaletseng. Li-blocks tsena ke lintlha, litemoso le litemoso, 'me li sebelisoa ka tsela e latelang:
- TLHOKOMELISO: A ELA HLOKO e bontša lintlha tsa bohlokoa tse u thusang ho sebelisa sistimi ea komporo ea hau hamolemo.
- TLHOKOMELO: A TLHOKOMELISO e bonts'a tšenyo e ka bang teng ho hardware kapa tahlehelo ea data mme e u bolella mokhoa oa ho qoba bothata.
- TEMOSO: A TEMOSO e bontša monyetla oa ho ntša kotsi ’meleng ’me e u bolella kamoo u ka qobang bothata boo kateng. Litemoso tse ling li ka hlaha ka lifomate tse ling 'me li kanna tsa se felehetsoe ke aekhone. Maemong a joalo, tlhahiso e tobileng ea temoso e laetsoe ke bolaoli ba taolo.
Matla
- Monitor e lokela ho sebetsoa feela ho tsoa mofuteng oa mohloli oa matla o bontšitsoeng leiboleng. Haeba o sa tiisehe ka mofuta oa motlakase o fanoang lapeng la hau, ikopanye le morekisi oa hau kapa k'hamphani ea motlakase ea lehae.
- Sesebelisoa se na le polaka e mehatla e meraro, polaka e nang le phini ea boraro (ea motheo). Plaka ena e tla kenella feela ka har'a motlakase o theiloeng fatše e le karolo ea polokeho. Haeba outlet ea hau e sa kenele polaka ea lithapo tse tharo, kopa setsebi sa motlakase hore se kenye sephetho se nepahetseng, kapa sebelisa adaptara ho sila sesebelisoa ka mokhoa o sireletsehileng. Se ke oa hlola sepheo sa polokeho ea polaka e theiloeng fatše.
- Tlosa yuniti nakong ea sefefo sa lehalima kapa ha e ke ke ea sebelisoa nako e telele. Sena se tla sireletsa leihlo ho senya ka lebaka la ho phahama ha matla.
- Se ke oa jarisa lithapo tsa motlakase le lithapo tse atolositsoeng. Ho jara haholo ho ka fella ka mollo kapa ts'okelo ea motlakase.
- Ho netefatsa ts'ebetso e khotsofatsang, sebelisa sebali feela ka likhomphutha tse thathamisitsoeng ke UL tse nang le lisebelisoa tse hlophisitsoeng tse nepahetseng tse tšoailoeng lipakeng tsa 100-240V AC, Min. 5A.
- Sokete ea lebota e tla kenngoa haufi le lisebelisoa 'me e tla fumaneha habonolo.
Ho kenya
- Se ke oa beha sebonela-hōle holim'a kariki e sa tsitsang, stand, tripod, bracket, kapa tafole. Haeba mochine o oela, o ka ntša motho kotsi 'me oa baka tšenyo e tebileng ho sehlahisoa sena. Sebelisa feela kolotsana, stand, tripod, bracket, kapa tafole e khothaletsoang ke moetsi kapa e rekisoang ka sehlahisoa sena. Latela litaelo tsa moetsi ha u kenya sehlahisoa 'me u sebelise lisebelisoa tse holimo tse khothaletsoang ke moetsi. Motsoako oa sehlahisoa le koloi o lokela ho tsamaisoa ka hloko.
- Le ka mohla u se ke ua sutumetsa ntho leha e le efe ka har'a sekotjana sa khabinete ea ho beha leihlo. E ka senya likarolo tsa potoloho e bakang mollo kapa ts'oaetso ea motlakase. Le ka mohla u se ke ua tšolla lintho tse metsi holim'a mochine.
- U se ke ua beha karolo e ka pele ea sehlahisoa fatše.
- Haeba u beha sebali leboteng kapa shelofong, sebelisa sekontiri se amohetsoeng ke moetsi 'me u latele litaelo tsa kit.
- Tlohela sebaka se itseng ho potoloha leifo joalokaha ho bontšitsoe ka tlase. Ho seng joalo, phepelo ea moea e kanna ea se lekane, ka hona ho chesa haholo ho ka baka mollo kapa ho senya sehlahlo.
- Sheba ka tlase libaka tse khothaletsoang tsa moea tse potileng sebali ha mochini o kentsoeng leboteng kapa setulong:
- Ka kopo, reka sekoaelo sa lebota se loketseng ho qoba khaello ea sebaka se pakeng tsa thapo e ka morao le lebota.
Ho hloekisa
- Hloekisa khabinete kamehla ka lesela. U ka sebelisa sesepa se bonolo ho hlakola letheba, ho e-na le sesepa se matla se tla thibela khabinete ea lihlahisoa.
- Ha u hloekisa, etsa bonnete ba hore ha ho sesepa se lutlang ka har'a sehlahisoa. Lesela la ho hloekisa ha lea lokela ho ba mahoashe haholo kaha le tla ngoaea skrineng.
- Ka kopo, khaola thapo ea motlakase pele u hloekisa sehlahisoa.
Tse ding
- Haeba sehlahiswa se ntsha monko o makatsang, modumo kapa mosi, kgaola polaka ya motlakase HANG-HANG mme o ikopanye le Setsi sa Tshebeletso.
- Netefatsa hore masoba a ho kenya moea ha a koaloe ke tafole kapa kharetene.
- Se ke oa kenya leihlo la LCD maemong a thothomelang haholo kapa maemong a matla haholo nakong ea ts'ebetso.
- U se ke ua kokota kapa ua lihela mochine nakong ea ts'ebetso kapa lipalangoang.
Tlhophiso
Tse ka Hare ho Lebokose
- Ha se likhoele tsohle tsa mats'oao (lithapo tsa HDMI / DP / USB / Audio) tse tla fanoa bakeng sa linaha le libaka. Ka kopo ikopanye le morekisi oa lehae kapa ofisi ea lekala ea AOC bakeng sa netefatso.
Seta Motheo
- Ka kopo, theha kapa tlosa setsi ka ho latela mehato e ka tlase.
- Ka kopo, beha leihlo sebakeng se bonolo le se bataletseng ho thibela mengwapo.
Tlhophiso:
Tlosa:
Ho fetola ViewAngle
- Bakeng sa ho fetisisa viewing, ho kgothaletswa ho sheba sefahleho se feletseng sa leihlo, ebe o fetola angle ea mochine ho ea ka seo u se ratang.
- Tšoara sethala e le hore u se ke ua liha sebali ha u fetola angle ea mochine.
O khona ho fetola li-monitor ka tsela e latelang:
HLOKOMELA:
U se ke ua ama skrine ea LCD ha u fetola angle. E ka baka tšenyo kapa ea senya skrine ea LCD.
Ho hokela Mohlahlobi
Lihokelo tsa Cable Ka morao ho Monitor le Khomphutha:
- HDMI
- DisplayPort
- Earphone kantle
- Matla
- USB-PC holimo holimo
- USB 3.2 Gen 1
- USB3. 2 Gen1+Ho tjhaja ka Potlako
- USB 3.2 Gen 1
Hokela ho PC
- Hokela thapo ea motlakase ka morao ho ponts'o ka tieo.
- Koala komporo ea hau 'me u lokolle thapo ea motlakase.
- Hokela thapo ea pontšo ho sehokelo sa video se ka morao komporong ea hau.
- Hokela thapo ea motlakase ea komporo ea hau le skrineng ea hau sebakeng se haufi.
- Bulela komporo ea hau 'me u bontshe.
- Haeba sesupo sa hau se hlahisa setšoantšo, ts'ebetso e felile. Haeba e sa hlahise setšoantšo, ka kopo sheba Tharollo ea mathata. Ho sireletsa lisebelisoa, kamehla tima PC le LCD monitor pele o hokela.
Mosebetsi oa Freesync
- Mosebetsi oa Freesync o sebetsa le DP1/DP2/HDMI1/HDMI2
- Khadi ea Graphics e Lumellanang: Khothaletsa lenane hore le ka tlase, le lona le ka hlahlojoa ka ho etela KGOTSO
- MD Radeon™ RX 480
- AMD Radeon TM RX 470
- AMD Radeon TM RX 460
Radeon Pro Duo
- Letoto la AMD Radeon R9 300
- AMD Radeon R9 Fury X
- AMD Radeon R9 360
- AMD Radeon R7 360
- AMD Radeon R9 295X2
- AMD Radeon R9 290X
- AMD Radeon R9 290
- AMD Radeon R9 285
- AMD Radeon R7 260X
- AMD Radeon R7 260
Ho fetola
Li-hotkeys
| 1 | Mohloli/Tsoa |
| 2 | Mokhoa oa papali/ |
| 3 | Sebaka sa ho daela/> |
| 4 | Menu/kena |
| 5 | Matla |
Mohloli/Tsoa
- Ha OSD e koetsoe, tobetsa konopo ea Source / Exit e tla ba Mohloli oa hot hot mosebetsi.
Mokhoa oa papali/
- Ha OSD e le sieo, tobetsa konopo ea "<" ho bula ts'ebetso ea papali, ebe o tobetsa "<" kapa ">" ho khetha mokhoa oa papali (FPS, RTS, Racing, Gamer 1, Gamer 2 kapa Gamer 3) ho latela mefuta e fapaneng ea lipapali.
Sebaka sa ho daela/>
- Ha OSD e le sieo, tobetsa konopo ea Dial Point ho menu e sebetsang ea Dial Point, ebe o tobetsa "<" kapa ">" ho seta kapa ho tima Dial Point.
Menu/kena
- Tobetsa ho hlahisa OSD kapa ho netefatsa khetho.
Matla
- Bulela/tima sehlahlo.
Litlhophiso tsa OSD
- Taelo ea mantlha le e bonolo ea linotlolo tsa taolo.
- Tobetsa ea
Konopo ea MENU ho kenya fensetere ea OSD. - Tobetsa ka ho le letšehali kapa ka ho le letona ho tsamaea ka har'a lits'ebetso. Hang ha mosebetsi o lakatsehang o totobalitsoe, tobetsa konopo MENU-konopo ho e kenya tshebetsong, ebe o tobetsa Le letshehadi kapa Ka ho le letona ho tsamaisetsa ditshebetsong tsa menu e nyane. Hang ha mosebetsi o lakatsehang o totobalitsoe, tobetsa konopo Konopo ea MENU ho e kenya tshebetsong.
- Tobetsa Leqele kapa fetola li-setting tsa tšebetso e khethiloeng. Tobetsa
ho tsoa. Haeba u batla ho fetola ts'ebetso e 'ngoe, pheta mehato ea 2-3. - Mosebetsi oa senotlolo sa OSD: Ho notlela OSD, tobetsa o hatelle Konopo ea MENU ha sebali se koetsoe ebe o tobetsa matla
konopo ho bulela leihlo. Ho notlolla, OSD - tobetsa o hatelle konopo ea MENU ha sebali se koetsoe, ebe o tobetsa konopo konopo ea matla ho bulela sebali.
Lintlha:
- Haeba sehlahisoa se na le lets'oao le le leng feela, ntho ea "Input Select" e koetsoe hore e lokisoe.
- Haeba boholo ba skrini ea sehlahisoa e le 4: 3 kapa qeto ea lets'oao la ho kenya e le tharollo ea lehae, ntho ea "Image Ratio" e koetsoe.
- E 'ngoe ea mesebetsi ea DCR, Colour Boost le Picture Boost e kentsoe tšebetsong, tse ling tse peli li tima ka nepo.
Leseli
Hlokomela:
Mosebetsi oa MBR le Overdrive Boost li fumaneha feela ha Adaptive-Sync e koetsoe 'me maqhubu a emeng a fihla ho 75 Hz.
Ho Hlophisa Mebala
|
|
Mobala Temp. |
E futhumetse | Hopola Mocheso oa Mobala o Mofuthu ho tsoa ho EEPROM. | |
| Tloaelehileng | Hopola Mocheso o Tloaelehileng oa 'Mala ho tsoa ho EEPROM. | |||
| Pholile | Hopola Mocheso oa Mobala o Pholile ho tsoa ho EEPROM. | |||
| sRGB | Hopola Mocheso oa Mobala oa SRGB ho tsoa ho EEPROM. | |||
| Mosebedisi | Khutlisa Mocheso oa Mobala ho tsoa ho EEPROM. | |||
|
Mokhoa oa DCB |
Ntlafatsa ka botlalo | Ho Bulela kapa ho Koala | Tlosa kapa u lumelle mokhoa oa ho ntlafatsa ka botlalo | |
| Letlalo la Tlhaho | Ho Bulela kapa ho Koala | Thibela kapa bulela Mokhoa oa Letlalo la Tlhaho | ||
| Tšimo e Tala | Ho Bulela kapa ho Koala | Thibela kapa Nolofatsa Mokhoa oa Sebaka sa Green | ||
| Botala ba leholimo | Ho Bulela kapa ho Koala | Thibela kapa Numella Mokhoa oa Sky-blue | ||
| Fumana ka ho iketsa | Ho Bulela kapa ho Koala | Tlosa kapa u lumelle mokhoa oa AutoDetect | ||
| E tima | Tlosa mokhoa oa DCB | |||
| Pontšo ea DCB | Ho Bulela kapa ho Koala | Tlosa kapa bulela Demo | ||
| Khubedu | 0-100 | Phaello e khubelu ho tsoa ho Digital-register. | ||
| Botala | 0-100 | Green fumana ho tswa ho Digital-register. | ||
| Boputsoa | 0-100 | Phaello e putsoa ho tsoa ho Digital-register. |
Matlafatsa Litšoantšo
|
|
Frame e Khanyang | Ho Bulela kapa ho Koala | Thibela kapa Numella Frame e Khanyang |
| Boholo ba foreimi | 14-100 | Fetola Boholo ba Frame | |
| Khanya | 0-100 | Fetola Khanya ea Frame | |
| Bapisa | 0-100 | Fetola Phapano ea Frame | |
| H. boemo | 0-100 | Fetola Sebaka se rapameng sa Frame | |
| V. boemo | 0-100 | Fetola Maemo a Thepa ea Frame |
Hlokomela:
Fetosa ho khanya, phapang, le boemo ba Frame e Khanyang hore e be betere viewka boiphihlelo.
Setup ea OSD
|
Puo | Khetha puo ea OSD | |
| Khefutso | 5-120 | Fetola nako ea OSD | |
| Bokhoni ba DP | 1.1/1.2 (CU34G2)
1.1/1.2/1.4 (CU34G2X) |
Ka kopo hlokomela hore ke DP1.2 feela e tšehetsang Adaptive-
Sync mosebetsi |
|
| H. Boemo | 0-100 | Fetola boemo bo otlolohileng ba OSD | |
| V. Boemo | 0-100 | Fetola boemo bo otlolohileng ba OSD | |
| Bolumo | 0-100 | Phetoho ea Molumo. | |
| Ponaletso | 0-100 | Fetola ponaletso ea OSD | |
| Khopotso ea Khefu
(Khutsa- Erinnerung) |
Bula (Ein) / Off (Aus) |
Roba khopotso haeba mosebelisi a tsoela pele ho sebetsa nako e fetang 1hrs | |
| Frame Counter (CU34G2) | E theohile / Ka ho le letona-Holimo / Ka ho le letona-
Tlase / Left-down / Left- Up |
Hlahisa V frequency hukung e khethiloeng. |
Lintlha:
Haeba litaba tsa video tsa DP li tšehetsa DP1.2, ka kopo khetha DP1.2 bakeng sa Bokhoni ba DP; ho seng joalo, ka kopo khetha DP1.1.
Tlhophiso ea PIP
|
Tlhophiso ea PIP | E tima / PIP / PBP | E tima |
| Mohloli o ka Sehloohong | Latela Input Khetha Content | HDMI1 | |
| Sub Source | Latela Input Khetha Content | DP (CU34G2)
HDMI1 (CU34G2X) |
|
| Boholo | E nyenyane, e Hare, E kholo | Nyenyane | |
| Boemo | Ka ho le letona-Holimo / Ho le letona-Fatše / Le letšehali-Fatše /
Le letšehali-Holimo |
Right-Up | |
| Audio | E felile / E felile | E tima | |
| Fapanya | Fetola mohloli oa skrine. |
CU34G2:
| Sub Main | HDMI1 | HDMI2 | DP |
| HDMI1 | X | X | V |
| HDMI2 | X | X | V |
| DP | V | V | X |
Litlhophiso tsa Lipapali
|
Mokhoa oa Papali |
E tima | Ha ho ntlafatso ka setšoantšo sa Smart
papali |
|
FPS |
Bakeng sa ho bapala FPS (Motho oa Pele Thunya-
ers) lipapali. E ntlafatsa lintlha tsa boemo bo lefifi ba theme e ntšo. |
||
| RTS | Bakeng sa ho bapala RTS (Real Time Strate-
gy). E ntlafatsa boleng ba setšoantšo. |
||
|
Peisong |
Bakeng sa ho bapala lipapali tsa mabelo, e fana ka
nako ea karabo e potlakileng le ho tlala mebala e phahameng. |
||
| Sebapali1 | Litlhophiso tsa khetho ea mosebelisi li bolokiloe joalo ka
Sebapali sa 1. |
||
| Sebapali2 | Litlhophiso tsa khetho ea mosebelisi li bolokiloe joalo ka
Sebapali sa 2. |
||
| Sebapali3 | Litlhophiso tsa khetho ea mosebelisi li bolokiloe joalo ka
Sebapali sa 3. |
||
|
Taolo ea Moriti |
0-100 |
Shadow Control Default ke 50, ka nako eo
mosebelisi a ka fetola ho tloha ho 50 ho isa ho 100 kapa 0 ho eketsa phapang bakeng sa setšoantšo se hlakileng. 1. Haeba setšoantšo se le lefifi haholo hoo se ke keng sa bonoa ka botlalo, fetola ho tloha ho 50 ho isa ho 100 bakeng sa setšoantšo se hlakileng. 2. Haeba sets'oants'o se le sesoeu haholo hore se ka bonoa ka botlalo, fetola ho tloha ho 50 ho isa ho 0 bakeng sa setšoantšo se hlakileng. |
|
| Phaello e tlase Lag | Bula/E tima | Koala foreimi buffer hore e fokotsehe
ho lieha ho kenya |
|
|
'Mala oa Papali |
0-20 |
'Mala oa Papali o tla fana ka boemo ba 0-20
bakeng sa ho lokisa saturation ho fumana setšoantšo se betere. |
|
| Mokhoa oa LowBlue | Ho bala / Ofisi / Marang-rang /
Multimedia / Off |
Fokotsa leqhubu la lebone le leputsoa ka
ho laola mocheso oa 'mala. |
|
|
Ho khanna ho feta tekano |
E fokola |
Fetola nako ea karabo. (Boost e ka thusa ho Freesync feela off mode) |
|
| Mahareng | |||
| E matla | |||
| Boost (Nako ea karabo ea setšoantšo se tsamaeang
1ms) |
|||
| E tima | |||
| Sebopeho sa foreimi
(CU34G2X) |
Off / Right-Up / Right-Down / Ho le letšehali-
Tlase (tla-tla-tse) /left-up |
Hlahisa sekhahla sa ho sekena se otlolohileng | |
|
MBR |
0-20 |
MBR (Motion Blur Reduction) e tla
fana ka maemo a 0 - 20 bakeng sa ho lokisa lefifi la motsamao o bonahalang. |
|
| Adaptive-Sync | Bula/E tima | Fetola Adaptive-Sync |
Eketsa
|
Khetho ea ho kenya | Kgetha Mohlodi wa Letshwao la Kena | |
| Sebopeho sa Auto. | Ee kapa che | Fetosa senepe hore se be sa kamehla | |
| Nako ea nako | Lihora tse 0 ho isa ho tse 24 | Khetha nako ea nako ea DC | |
|
Karolelano ea setšoantšo |
Bophara / 4:3 / 1:1 / 17”(4:3) / 19”(4:3) /
19”(5:4) / 19”w(16:10) / 21.5”w(16:9) / 22”w(16:10) / 23”w(16:9) / 23.6”W (16:9) / 24”W (16:9) / 27”W (16:9) |
Khetha tekanyo ea setšoantšo bakeng sa pontšo. |
|
| DDC/CI | Ee kapa che | Bulela / Off DDC / CI Support | |
| Seta bocha | Ee kapa che | Seta menu bocha hore e be ea kamehla | |
| USB
(CU34G2) |
Bula/E tima |
Etsoa
 |
Etsoa | Tsoa OSD ea mantlha |
Letšoao la LED
| Boemo | Mmala oa LED |
| Mokhoa o felletseng oa Matla | Bosoeu |
| Mokhoa oa ho tima | namunu |
Tharollo ya mathata
| Bothata & Potso | Litharollo Tse ka khonehang |
| Matla a LED ha a TSOE | Etsa bonnete ba hore konopo ea motlakase e BULETSOE 'me Thapo ea Motlakase e hoketsoe ka nepo setsing sa motlakase se theohileng fatše le ho sehlahlo. |
| Ha ho litšoantšo skrineng | Na thapo ea motlakase e hokahane hantle?
Lekola khokelo ea thapo ea motlakase le phepelo ea motlakase. Na thapo e hokahane hantle? (E hoketswe ka thapo ya HDMI) Sheba kgokelo ya thapo ya HDMI. (E hoketsoe ho sebelisoa thapo ea DP) Sheba khokahano ea thapo ea DP. * Tlhahiso ea HDMI/DP ha e fumanehe mofuteng o mong le o mong. Haeba motlakase o le teng, qala komporo ea hau pele ho bona skrineng sa pele (skrine sa ho kena) se ka bonoang. Haeba skrineng sa pele (skrine sa ho kena) se hlaha, qala komporo ka mokhoa o sebetsang (mokhoa o bolokehileng bakeng sa Windows 7/ 8/10) ebe u fetola makhetlo a karete ea video. (Sheba ho Setting ea Optimal Resolution) Haeba skrine ea pele (skrine sa ho kena) se sa hlahe, ikopanye le Setsi sa Litšebeletso kapa morekisi oa hau. A na u bona "Input Not Supported" skrineng? U ka bona molaetsa ona ha lets'oao le tsoang kareteng ea video le feta qeto e phahameng le khafetsa eo sebali se ka sebetsanang le eona hantle. Fetola boholo ba qeto le maqhubu ao sebali se ka sebetsanang le ona hantle. Etsa bonnete ba hore li-Drivers tsa AOC Monitor li kentsoe. |
|
Setšoantšo se Fuzzy 'me se na le Bothata ba ho Finyella ha Ghosting |
Fetola phapang le taolo ea khanya. Tobetsa ho itokisa ka boyona.
Etsa bonnete ba hore ha u sebelise thapo e atolositsoeng kapa switch box. Re khothaletsa ho kenya sebali ka kotloloho ho sehokelo sa tlhahiso ea karete ea video ka mokokotlong. |
| Li-Bounces tsa Litšoantšo, Li-Flickers Kapa Paterone ea Wave e Hlaha Setšoantšong | Suthisa lisebelisoa tsa motlakase tse ka bakang tšitiso ea motlakase hole
ho tloha ho shebella ka hohle kamoo ho ka khonehang. Sebelisa sekhahla se phahameng sa ho khatholla sebali sa hau se khonang ho se etsa qetong eo u e sebelisang. |
| Monitor o ntse a sa sebetse-
Mokhoa” |
The Computer Power Switch e lokela ho ba boemong ba ON.
Karete ea Video ea Khomphuta e lokela ho kenngoa hantle sekoting sa eona. Etsa bonnete ba hore thapo ea video ea leihlo e hokahane hantle le komporo. Lekola thapo ea video ea leihlo 'me u netefatse hore ha ho phini e kobehileng. Etsa bonnete ba hore komporo ea hau ea sebetsa ka ho otla konopo ea CAPS LOCK keyboard ha u ntse u shebile LED ea CAPS LOCK. Lebone la LED le lokela ho ba teng bulela kapa TIMA ka mora ho tobetsa konopo ya CAPS LOCK. |
| Ha ho o mong oa mebala ea mantlha (RED, GREEN, kapa BLUE) | Lekola thapo ea video ea sebali 'me u netefatse hore ha ho phini e senyehileng. Etsa bonnete ba hore thapo ea video ea leihlo e hokahane hantle le komporo. |
| Setšoantšo se na le mathata a mebala (bosoeu ha bo shebahale bo le tšoeu) | Fetola 'mala oa RGB kapa khetha mocheso o lakatsehang oa' mala. |
| Litšitiso tse tšekaletseng kapa tse emeng skrineng |
Sebelisa Windows 7/8/10 mokhoa oa ho koala ho fetola CLOCK le FOCUS. Tobetsa ho itokisa. |
Tlhaloso
Tlhaloso e Akaretsang
|
Phanele |
Lebitso la mohlala | CU34G2 | CU34G2X | ||
| Sistimi ea ho khanna | TFT Mmala oa LCD | ||||
| Viewkhona Sebopeho sa setšoantšo | 86.36 cm e diagonane | ||||
| Sekhahla sa pixel | 0.23175mm(H) x 0.23175mm(V) | ||||
| Video | Sebopeho sa HDMI & Sebopeho sa DP | ||||
| Mmala oa Pontšo | 16.7M Mebala | ||||
| Ba bang | Meeli ea scan | 30-160KHZ(HDMI/DP) | 30-170KHZ(HDMI)
30-220KHZ(DP) |
||
| Boholo ba scan ninete e holimo (Boholo) | 797.22 limilimithara | ||||
| Lekhahla la scan ninemanga.com | 48-100HZ(HDMI/DP) | 48-100HZ(HDMI)
48-144HZ(DP) |
|||
| Boholo ba Skena se Otlolohileng(Boholo) | 333.72 limilimithara | ||||
| Qeto e nepahetseng esale pele | 3440×1440@60Hz | ||||
| Qeto e phahameng | 3440×1440@100Hz (HDMI/DP) | 3440×1440@144Hz (DP) | |||
| Plug & Bapala | VESA DDC2B / CI | ||||
| Sesebelisoa sa ho kenya | HDMI / DP | ||||
| Mohloli oa Matla | 100-240V~, 50/60Hz,1.5A | ||||
|
Tšebeliso ea Matla |
Tloaelehileng (khanya le phapang ea kamehla) | 55W | 67W | ||
| Max. (khanya = 100, phapang =100) | 108W | 110W | |||
| Ho boloka matla | ≤0.5W | ≤0.5W | |||
| Litšobotsi Tsa 'Mele | Mofuta oa Sehokelo | HDMI/DP/USB/Earphone e felile | |||
| Mofuta oa Cable ea Letšoao | Detachable | ||||
|
Tikoloho |
Mocheso | Ho sebetsa | 0°~ 40° | ||
| E sa sebetseng | -25°~ 55° | ||||
| Mongobo | Ho sebetsa | 10% ~ 85% (ha e fokotsehe) | |||
| E sa sebetseng | 5% ~ 93% (ha e fokotsehe) | ||||
| Bophahamo | Ho sebetsa | 0~ 5000m (0~ 16404ft) | |||
| E sa sebetseng | 0~ 12192m (0~ 40000ft) | ||||
Seta pele Mekhoa ea Pontšo
| TS'ELISO | TSIETSO | TS'ELISO
FREQUENCY(kHz) |
MOEKETSI
FREQUENCY(Hz) |
|
VGA |
640×480@60Hz | 31.469 | 59.94 |
| 640×480@72Hz | 37.861 | 72.809 | |
| 640×480@75Hz | 37.5 | 75 | |
|
SVGA |
800×600@60Hz | 37.879 | 60.317 |
| 800×600@72Hz | 48.077 | 72.188 | |
| 800×600@75Hz | 46.875 | 75 | |
|
Katoloso ea XGA |
1024×768@60Hz | 48.363 | 60.004 |
| 1024×768@70Hz | 56.476 | 70.069 | |
| 1024×768@75Hz | 60.023 | 75.029 | |
| SXGA | 1280×1024@60Hz | 63.981 | 60.020 |
| 1280×1024@75Hz | 79.976 | 75.025 | |
| WXGA+ | 1440×900@60Hz | 55.935 | 59.887 |
| 1440×900@60Hz | 55.469 | 59.901 | |
| WSXGA | 1680×1050@60Hz | 65.290 | 59.954 |
| 1680×1050@60Hz | 64.674 | 59.883 | |
| HD | 1920×1080@60Hz | 67.5 | 60 |
|
QHD |
2560×1080@60HZ | 66 | 60 |
| 2560×1080@50HZ | 56.25 | 50 | |
| 2560×1080@120HZ | 150 | 120 | |
|
WQHD |
3440×1440@30HZ | 44.408 | 29.985 |
| 3440×1440@60HZ | 89.819 | 59.973 | |
| 3440×1440@100HZ | 150.972 | 99.982 | |
| 3440X1440@120(CU34G2X DP Only) | 181.2 | 120 | |
| 3440X1440@144(CU34G2X DP Only) | 214.56 | 144 | |
| MEKHOA IBM | |||
| DOS | 640×350@70Hz | 31.469 | 70.087 |
| 720×400@70Hz | 31.469 | 70.087 | |
| MAC MEKHOA | |||
| VGA | 640×480@67Hz | 35.000 | 66.667 |
| SVGA | 832×624@75Hz | 49.725 | 74.551 |
| Katoloso ea XGA | 1024×768@75Hz | 60.241 | 74.927 |
Likabelo tsa Pin
| Pin No. | Lebitso la Letshwao | Pin No. | Lebitso la Letshwao | Pin No. | Lebitso la Letshwao |
| 1. | Lintlha tsa TMDS 2+ | 9. | Lintlha tsa TMDS 0- | 17. | Lebala la DDC / CEC |
| 2. | TMDS Data 2 Sireletso | 10. | Oache ea TMDS + | 18. | + 5V Matla |
| 3. | Lintlha tsa TMDS 2- | 11. | Theko ea TMDS Clock | 19. | Hot polaka lemoha |
| 4. | Lintlha tsa TMDS 1+ | 12. | Nako ea TMDS- | ||
| 5. | Lintlha tsa TMDS 1Shield | 13. | CEC | ||
| 6. | Lintlha tsa TMDS 1- | 14. | E bolokiloe (NC ho sesebelisoa) | ||
| 7. | Lintlha tsa TMDS 0+ | 15. | SCL | ||
| 8. | TMDS Data 0 Sireletso | 16. | SDA |
20-Pin Mmala Pontšo ea Pontšo ea Pontšo
| Pin No. | Lebitso la Letshwao | Pin No. | Lebitso la Letshwao |
| 1 | ML_Lane 3 (n) | 11 | GND |
| 2 | GND | 12 | ML_Lane 0 (leq) |
| 3 | ML_Lane 3 (leq) | 13 | TIISETSO 1 |
| 4 | ML_Lane 2 (n) | 14 | TIISETSO 2 |
| 5 | GND | 15 | AUX_CH (leq) |
| 6 | ML_Lane 2 (leq) | 16 | GND |
| 7 | ML_Lane 1 (n) | 17 | AUX_CH (n) |
| 8 | GND | 18 | Hot polaka lemoha |
| 9 | ML_Lane 1 (leq) | 19 | Khutlisetsa DP_PWR |
| 10 | ML_Lane 0 (n) | 20 | EA-DP_PWR |
Hokela le ho Bapala
Plug & Play DDC2B Feature
- Sesebelisoa sena se na le bokhoni ba VESA DDC2B ho latela VESA DDC STANDARD. E lumella sebali ho tsebisa sistimi ea moamoheli hore na ke mang, mme, ho latela boemo ba DDC e sebelisitsoeng, ho fana ka tlhaiso-leseling e eketsehileng mabapi le bokhoni ba eona ba ho bonts'a.
- DDC2B ke mocha oa data oa mahlakore a mabeli o thehiloeng ho protocol ea I2C. Moamoheli a ka kopa tlhahisoleseling ea EDID holim'a mocha oa DDC2B.
- www.aoc.com
- ©2019 AOC. Litokelo tsohle li sirelelitsoe.
Litokomane / Lisebelisoa
 |
Setšoantšo sa AOC CU34G2 LCD [pdf] Bukana ea Mosebelisi CU34G2 LCD Monitor, CU34G2, LCD Monitor, Monitor |
