Bayani na AOC CU34G2
Tsaro
Taron kasa
- Ƙananan sassan da ke gaba suna bayyana ƙa'idodin ƙa'idodin da aka yi amfani da su a cikin wannan takarda.
Bayanan kula, Gargaɗi, da Gargaɗi
- A cikin wannan jagorar, tubalan rubutu na iya kasancewa tare da gunki kuma a buga shi da nau'in m ko cikin nau'in rubutun. Waɗannan tubalan bayanin kula ne, gargaɗi, da gargaɗi, kuma ana amfani da su kamar haka:
- NOTE: A NOTE yana nuna mahimman bayanai waɗanda ke taimaka muku yin amfani da tsarin kwamfutar ku da kyau.
- HATTARA: A CAUTION yana nuna yiwuwar lalacewar hardware ko asarar bayanai kuma yana gaya muku yadda ake guje wa matsalar.
- GARGADI: A GARGAƊI yana nuna yiwuwar cutar da jiki kuma yana gaya muku yadda za ku guje wa matsalar. Wasu gargaɗin na iya bayyana a madadin tsari kuma ƙila ba su tare da gunki. A irin waɗannan lokuta, ƙayyadaddun gabatar da gargaɗin yana da izini ta hanyar hukuma.
Ƙarfi
- Ya kamata a yi aiki da mai saka idanu kawai daga nau'in tushen wutar lantarki da aka nuna akan lakabin. Idan ba ku da tabbacin nau'in wutar lantarki da ake bayarwa ga gidanku, tuntuɓi dillalin ku ko kamfanin wutar lantarki na gida.
- Ana sanye da na'urar saka idanu tare da filogi mai tushe mai fuska uku, filogi mai fini na uku (ƙasa). Wannan filogi zai dace ne kawai a cikin madaidaicin wutar lantarki azaman fasalin aminci. Idan hanyar sadarwar ku ba ta ɗauki filogin waya uku ba, sa ma'aikacin wutar lantarki ya shigar da madaidaicin wurin, ko amfani da adaftan don ƙasa na'urar lafiya. Kar a kayar da manufar aminci na filogi mai tushe.
- Cire na'urar yayin guguwar walƙiya ko lokacin da ba za a yi amfani da shi na dogon lokaci ba. Wannan zai kare na'urar duba daga lalacewa saboda hauhawar wutar lantarki.
- Kar a yi lodin igiyoyin wuta da igiyoyin tsawo. Yin lodin abu zai iya haifar da gobara ko girgiza wutar lantarki.
- Don tabbatar da aiki mai gamsarwa, yi amfani da na'urar saka idanu kawai tare da kwamfutoci da aka jera UL waɗanda ke da madaidaitan madaidaitan ma'auni masu alama tsakanin 100-240V AC, Min. 5A.
- Za a shigar da soket ɗin bango a kusa da kayan aiki kuma ya zama mai sauƙi.
Shigarwa
- Kada ka sanya na'urar a kan keken mara tsayayye, tsayawa, tawul, sashi, ko teburi. Idan mai saka idanu ya faɗi, zai iya cutar da mutum kuma ya haifar da mummunar lalacewa ga wannan samfurin. Yi amfani da keken keke, tsayawa, tafkuna, madaidaici, ko tebur wanda masana'anta suka ba da shawarar ko aka sayar da wannan samfur. Bi umarnin masana'anta lokacin shigar da samfurin kuma yi amfani da na'urorin haɗi waɗanda masana'anta suka ba da shawarar. Ya kamata a motsa haɗin samfur da cart tare da kulawa.
- Kada a taɓa tura kowane abu zuwa cikin ramin kan ma'aunin saka idanu. Yana iya lalata sassan da'ira da ke haifar da gobara ko girgiza wutar lantarki. Kada a taɓa zubar ruwa a kan duba.
- Kada a sanya gaban samfurin a ƙasa.
- Idan ka dora na'urar a kan bango ko shiryayye, yi amfani da kayan hawan da masana'anta suka amince da shi kuma bi umarnin kit.
- Bar wasu sarari a kusa da mai duba kamar yadda aka nuna a ƙasa. In ba haka ba, zazzagewar iska na iya zama rashin isasshe don haka zafi fiye da kima na iya haifar da gobara ko lalata na'urar duba.
- Duba ƙasa da shawarwarin wuraren samun iska a kusa da mai saka idanu lokacin da aka shigar da na'urar a bango ko a tsaye:
- Da fatan za a sayi bangon bango mai dacewa don guje wa rashin nisa tsakanin kebul na siginar baya da bango.
Tsaftacewa
- Tsaftace majalisa akai-akai da zane. Kuna iya amfani da abu mai laushi don shafe tabon, maimakon mai ƙarfi-dotergent wanda zai kula da majalisar samfurin.
- Lokacin tsaftacewa, tabbatar da cewa ba a zubar da wanki a cikin samfurin ba. Tufafin tsaftacewa bai kamata ya zama mai tauri ba saboda zai tarar da fuskar allo.
- Da fatan za a cire haɗin wutar lantarki kafin tsaftace samfurin.
Sauran
- Idan samfurin yana fitar da wani bakon kamshi, sauti ko hayaki, cire haɗin wutar lantarki NAN TAKE kuma tuntuɓi Cibiyar Sabis.
- Tabbatar cewa ba'a toshe wuraren buɗewar da tebur ko labule.
- Kada a sa na'urar duba LCD a cikin tsananin girgiza ko yanayin tasiri yayin aiki.
- Kar a ƙwanƙwasa ko sauke na'urar duba yayin aiki ko sufuri.
Saita
Abubuwan da ke cikin Akwati
- Ba duk siginar igiyoyi (HDMI / DP / USB / Audio igiyoyi) za a bayar ga duk ƙasashe da yankuna. Da fatan za a bincika tare da dila na gida ko ofishin reshe na AOC don tabbatarwa.
Saita Tushen
- Da fatan za a saita ko cire tushe ta bin matakan da ke ƙasa.
- Da fatan za a sanya na'urar a kan ƙasa mai laushi da lebur don hana karce.
Saita:
Cire:
Daidaitawa Viewcikin Angle
- Don mafi kyau duka viewDon haka, ana ba da shawarar duba cikakkiyar fuskar mai duba, sannan daidaita kusurwar na'urar zuwa abin da kuke so.
- Rike tsayawar don kada ku kifar da mai duba lokacin da kuka canza kusurwar mai duba.
Kuna iya daidaita mai duba kamar a ƙasa:
NOTE:
Kada ku taɓa allon LCD lokacin da kuke canza kusurwa. Yana iya haifar da lalacewa ko karya allon LCD.
Haɗa Monitor
Haɗin Kebul A Bayan Kula da Kwamfuta:
- HDMI
- DisplayPort
- Phonearar kunne ta fita
- Ƙarfi
- USB-PC na sama
- USB 3.2 Gen 1
- USB3. 2 Gen1+ Cajin gaggawa
- USB 3.2 Gen 1
Haɗa zuwa PC
- Haɗa igiyar wutar lantarki zuwa bayan nuni da ƙarfi.
- Kashe kwamfutarka kuma cire igiyoyin wutar lantarki.
- Haɗa kebul ɗin siginar nuni zuwa mai haɗin bidiyo a bayan kwamfutarka.
- Toshe igiyar wutar lantarki na kwamfutarku da nunin ku zuwa mashigar da ke kusa.
- Kunna kwamfutarka kuma nunawa.
- Idan duban ku ya nuna hoto, shigarwa ya cika. Idan baya nuna hoto, da fatan za a duba Shirya matsala. Don kare kayan aiki, koyaushe kashe PC da LCD duba kafin haɗawa.
Ayyukan Freesync
- Ayyukan Freesync yana aiki tare da DP1/DP2/HDMI1/HDMI2
- Katin Graphics mai jituwa: Jerin shawarwarin kamar na ƙasa ne, kuma ana iya bincika ta ziyartar www.AMD.com
- MD Radeon™ Farashin 480
- AMD RadeonTM Farashin 470
- AMD RadeonTM Farashin 460
Radeon Pro Duo
- AMD Radeon R9 300 Series
- AMD Radeon R9 Fury X
- AMD Radeon R9 360
- AMD Radeon R7 360
- AMD Radeon R9 295X2
- AMD Radeon R9 290X
- AMD Radeon R9 290
- AMD Radeon R9 285
- AMD Radeon R7 260X
- AMD Radeon R7 260
Daidaitawa
Hotkeys
| 1 | Tushen/Fita |
| 2 | Yanayin Wasa/ |
| 3 | Kiran Kira /> |
| 4 | Menu/Shiga |
| 5 | Ƙarfi |
Tushen/Fita
- Lokacin da OSD ke rufe, danna Maballin Maɓalli/Fita zai zama aikin maɓallin zafi mai zafi.
Yanayin Wasa/
- Lokacin da babu OSD, danna maɓallin "<" don buɗe aikin yanayin wasan, sannan danna maɓallin "<" ko ">" don zaɓar yanayin wasan (FPS, RTS, Racing, Gamer 1, Gamer 2 ko Gamer 3) dogara akan tsarin wasan. nau'ikan wasa daban-daban.
Kiran Kira />
- Lokacin da babu OSD, danna maɓallin bugun kira zuwa menu na bugun kira mai aiki, sannan danna "<" ko ">" don saita maɓallin bugun kira ko kashewa.
Menu/Shiga
- Latsa don nuna OSD ko tabbatar da zaɓin.
Ƙarfi
- Kunna/kashe mai duba.
Saitin OSD
- Umarni na asali da sauƙi akan maɓallan sarrafawa.
- Danna maɓallin
Maɓallin MENU don kunna taga OSD. - Latsa Hagu ko Dama don kewaya ayyukan. Da zarar aikin da ake so ya haskaka, danna maɓallin Maɓallin MENU don kunna shi, kuma danna Hagu ko Dama don kewaya cikin ayyukan ƙananan menu. Da zarar aikin da ake so ya haskaka, danna maɓallin Maɓallin MENU don kunna shi.
- Danna Hagu ko canza saitunan aikin da aka zaɓa. Latsa
fita. Idan kana son daidaita kowane aiki, maimaita matakai 2-3. - Aikin Kulle OSD: Don kulle OSD, latsa ka riƙe Maɓallin MENU yayin da mai duba ke kashe sannan danna wuta
maballin don kunna mai duba. Don buɗewa, OSD – danna ka riƙe maɓallin MENU yayin da mai saka idanu ke kashe, sannan danna maɓallin maɓallin wuta don kunna mai duba.
Bayanan kula:
- Idan samfurin yana da shigarwar siginar guda ɗaya kawai, abu na "Input Select" yana kashe don daidaitawa.
- Idan girman allon samfurin shine 4:3 ko ƙudurin siginar shigarwa shine ƙuduri na asali, abu na "Ratio Hoto" an kashe shi.
- Ɗaya daga cikin DCR, Boost Launi da Ayyukan Boost Hoto yana kunna, sauran ayyukan biyu ana kashe su daidai.
Hasken haske
Lura:
Ayyukan MBR da Overdrive Boost suna samuwa ne kawai lokacin da Adaptive-Sync ke kashe kuma mitar tsaye ta kai 75 Hz.
Saita Launi
|
|
Zazzabi Launi. |
Dumi | Tuna Zazzaɓin Launi mai Dumi daga EEPROM. | |
| Na al'ada | Tuna Yanayin Launi na Al'ada daga EEPROM. | |||
| Sanyi | Tuna Zazzaɓin Launi mai sanyi daga EEPROM. | |||
| sRGB | Tuna Yanayin Launi na SRGB daga EEPROM. | |||
| Mai amfani | Mayar da zafin launi daga EEPROM. | |||
|
Yanayin DCB |
Cigaba | Kunna Ko Kashe | A kashe ko Kunna Cikakken Yanayin Haɓakawa | |
| Nature Fata | Kunna Ko Kashe | A kashe ko Kunna Yanayin fata na yanayi | ||
| Filin Green | Kunna Ko Kashe | A kashe ko Kunna Yanayin Filin Kore | ||
| Sky-blue | Kunna Ko Kashe | A kashe ko Kunna Yanayin Sky-blue | ||
| Gano kansa | Kunna Ko Kashe | A kashe ko Kunna Yanayin AutoDetect | ||
| Kashe | Kashe Yanayin DCB | |||
| Demo na DCB | Kunna Ko Kashe | A kashe ko Kunna Demo | ||
| Ja | 0-100 | Jan riba daga Digital-rejista. | ||
| Kore | 0-100 | Green riba daga Digital-rejista. | ||
| Blue | 0-100 | Blue riba daga Digital-rejista. |
Haɓaka Hoto
|
|
Firam mai haske | Kunna Ko Kashe | A kashe ko Kunna Firam mai haske |
| Girman Firam | 14-100 | Daidaita Girman Firam | |
| Haske | 0-100 | Daidaita Tsarin Haske | |
| Kwatancen | 0-100 | Daidaita Ma'auni na Frame | |
| H. matsayi | 0-100 | Daidaita Frame a kwance Matsayi | |
| V. matsayi | 0-100 | Daidaita Frame Matsayin tsaye |
Lura:
Daidaita haske, bambanci, da matsayi na Firam ɗin Haske don mafi kyau viewgwaninta.
OSD Saita
|
Harshe | Zaɓi harshen OSD | |
| Lokaci ya ƙare | 5-120 | Daidaita Lokacin OSD | |
| Damar DP | 1.1/1.2 (CU34G2)
1.1/1.2/1.4 (CU34G2X) |
Da fatan za a lura cewa DP1.2 ne kawai ke tallafawa Adaptive-
Ayyukan daidaitawa |
|
| H. Matsayi | 0-100 | Daidaita matsayi na kwance na OSD | |
| V. Matsayi | 0-100 | Daidaita matsayi na OSD a tsaye | |
| Ƙarar | 0-100 | Daidaita Ƙarar. | |
| Gaskiya | 0-100 | Daidaita nuna gaskiya na OSD | |
| Tunatarwa Hutu
(Dakata- Erinnerung) |
Kunna (Ein) / Kashe (Aus) |
Tunatarwa ta hutu idan mai amfani ya ci gaba da aiki fiye da 1hrs | |
| Ma'aunin Tsari (CU34G2) | Kashe / Dama-Up / Dama-
Kasa / Hagu-Ƙasa / Hagu- Sama |
Nuna mitar V akan kusurwar da aka zaɓa. |
Bayanan kula:
Idan abun ciki na bidiyo na DP yana goyan bayan DP1.2, don Allah zaɓi DP1.2 don Ƙarfin DP; in ba haka ba, don Allah zaɓi DP1.1.
Saitin PIP
|
Saitin PIP | Kashe / PIP / PBP | Kashe |
| Babban Tushen | Bi Input Select Content | HDMI1 | |
| Sub Source | Bi Input Select Content | DP (CU34G2)
HDMI1 (CU34G2X) |
|
| Girman | Karami, Tsakiya, Babba | Karami | |
| Matsayi | Dama-Uba / Dama-Saukar / Hagu-Saukar /
Hagu-U |
Dama-Up | |
| Audio | A kunne / Kashewa | Kashe | |
| Musanya | Musanya tushen allo. |
CU34G2:
| Sub Main | HDMI1 | HDMI2 | DP |
| HDMI1 | X | X | V |
| HDMI2 | X | X | V |
| DP | V | V | X |
Saitin Wasan
|
Yanayin Wasan |
Kashe | Babu ingantawa ta hoton Smart
wasa |
|
FPS |
Don kunna FPS (Mutum na Farko Shoot-
ers) games. Yana haɓaka bayanan matakin bakin duhu. |
||
| RTS | Don kunna RTS (Dabarun Lokaci na Gaskiya-
gy). Yana inganta ingancin hoto. |
||
|
Racing |
Don kunna wasannin Racing, Yana bayarwa
mafi sauri lokacin amsawa da babban launi jikewa. |
||
| Gamer1 | An ajiye saitunan zaɓin mai amfani azaman
Gamer 1. |
||
| Gamer2 | An ajiye saitunan zaɓin mai amfani azaman
Gamer 2. |
||
| Gamer3 | An ajiye saitunan zaɓin mai amfani azaman
Gamer 3. |
||
|
Ikon Inuwa |
0-100 |
Default Control Inuwa shine 50, to
Mai amfani na ƙarshe zai iya daidaitawa daga 50 zuwa 100 ko 0 don ƙara bambanci don bayyananniyar hoto. 1. Idan hoton yayi duhu sosai don a gan shi dalla-dalla, daidaitawa daga 50 zuwa 100 don bayyana hoto. 2. Idan hoton ya yi fari da yawa don a gan shi dalla-dalla, daidaitawa daga 50 zuwa 0 don bayyananniyar hoto. |
|
| Ƙananan shigarwa Lag | Kunna/Kashe | Kashe firam buffer don raguwa
rashin jin daɗi |
|
|
Launin Wasan |
0-20 |
Launin Wasan zai ba da matakin 0-20
don daidaita saturation don samun hoto mai kyau. |
|
| Yanayin LowBlue | Karatu / Office / Intanet /
Multimedia / A kashe |
Rage igiyar haske shuɗi ta
sarrafa zafin launi. |
|
|
Overdrive |
Mai rauni |
Daidaita lokacin amsawa. (Boost zai iya kunna kawai a cikin Freesync kashe mode) |
|
| Matsakaici | |||
| Mai ƙarfi | |||
| Haɓakawa (Lokacin amsa hoton motsi
1ms) |
|||
| Kashe | |||
| Madaidaicin Counter
(CU34G2X) |
Kashe / Dama-Uwa / Dama-saukar / Hagu-
Kasa / Hagu-Up |
Nuna mitar dubawa a tsaye | |
|
MBR |
0-20 |
MBR (Rage Rage blur Motsi) zai
samar da matakan 0 - 20 don daidaita blur motsi na bayyane. |
|
| Adaptive-Sync | Kunna/Kashe | Daidaita Daidaita-Daidaitawa |
Ƙari
|
Input Zabi | Zaɓi Tushen Siginar shigarwa | |
| Sanya atomatik. | Ee ko A'a | Daidaita hoton ta atomatik zuwa tsoho | |
| A kashe mai ƙidayar lokaci | 0hrs | Zaɓi lokacin kashe DC | |
|
Girman Hoto |
Fadi / 4:3 / 1:1 / 17"(4:3) / 19"(4:3) /
19” (5:4) / 19” w (16:10) / 21.5” w (16:9) / 22” w (16:10) / 23” w (16:9) / 23.6” W (16:9) / 24” W (16:9) / 27” W (16:9) |
Zaɓi rabon hoto don nunawa. |
|
| DDC/CI | Ee ko A'a | Kunna/KASHE Tallafin DDC/CI | |
| Sake saiti | Ee ko A'a | Sake saita menu zuwa tsoho | |
| USB
(CU34G2) |
Kunna/Kashe |
Fita
 |
Fita | Fita daga babban OSD |
Alamar LED
| Matsayi | Launi na LED |
| Cikakken Yanayin Ƙarfi | Fari |
| Yanayin Kashe Aiki | Lemu |
Shirya matsala
| Matsala & Tambaya | Mahimman Magani |
| Wutar Wuta Ba a Kunnawa | Tabbatar cewa maɓallin wuta yana kunne kuma Igiyar Wutar tana haɗe da kyau zuwa tashar wutar lantarki ta ƙasa da kuma na'urar duba. |
| Babu hotuna akan allon | Ana haɗa igiyar wutar lantarki daidai?
Duba haɗin igiyar wutan lantarki da wutan lantarki. An haɗa kebul daidai? (An haɗa ta amfani da kebul na HDMI) Duba haɗin kebul na HDMI. (An haɗa ta amfani da kebul na DP) Duba haɗin kebul na DP. * Ba a samun shigarwar HDMI/DP akan kowane samfuri. Idan wuta tana kunne, sake kunna kwamfutar don ganin allon farko (allon shiga), wanda za'a iya gani. Idan allon farko (allon shiga) ya bayyana, kunna kwamfutar a cikin yanayin da ya dace (yanayin aminci don Windows 7/8/10) sannan canza mitar katin bidiyo. (Duba zuwa Saitin Mafi kyawun Ƙimar) Idan allon farko (allon shiga) bai bayyana ba, tuntuɓi Cibiyar Sabis ko dilan ku. Shin kuna iya ganin "Ba a Tallafin Shigarwa" akan allon? Kuna iya ganin wannan saƙon lokacin da sigina daga katin bidiyo ya wuce iyakar ƙuduri da mitar da mai duba zai iya ɗauka da kyau. Daidaita matsakaicin ƙuduri da mitar da mai duba zai iya ɗauka da kyau. Tabbatar cewa an shigar da Direbobi na AOC. |
|
Hoto Mai Haushi ne & Yana Da Matsalolin Shadowing Fatalwa |
Daidaita Ƙarfi da Ƙarfafawa. Danna don daidaitawa ta atomatik.
Tabbatar cewa ba kwa amfani da kebul na tsawo ko akwatin canzawa. Muna ba da shawarar toshe mai duba kai tsaye zuwa mai haɗa fitarwar katin bidiyo a baya. |
| Hoto Bounces, Flickers Ko Tsarin Kalamai Ya Bayyana A Hoton | Matsar da na'urorin lantarki waɗanda zasu iya haifar da tsangwama na lantarki zuwa nesa
daga mai saka idanu kamar yadda zai yiwu. Yi amfani da matsakaicin ƙimar wartsakewa mai saka idanu zai iya a ƙudurin da kuke amfani da shi. |
| Monitor yana Makale A Kashe Aiki-
Yanayin" |
Ya kamata Maɓallin Wutar Kwamfuta ya kasance a wurin ON.
Katin Bidiyon Kwamfuta yakamata a sanya shi da kyau a cikin ramin sa. Tabbatar cewa kebul ɗin bidiyo na mai duba yana da alaƙa da kwamfutar yadda ya kamata. Duba kebul na bidiyo na mai duba kuma tabbatar da cewa ba a lanƙwasa fil ba. Tabbatar cewa kwamfutarka tana aiki ta hanyar buga maɓallin CAPS LOCK akan madannai yayin kallon CAPS LOCK LED. LED ya kamata ko dai Kunna ko Kashe bayan danna maɓallin LOCK CAPS. |
| Rasa ɗayan manyan launuka (RED, GREEN, ko BLUE) | Duba kebul na bidiyo na mai saka idanu kuma tabbatar da cewa babu fil da ya lalace. Tabbatar cewa kebul ɗin bidiyo na mai duba yana da alaƙa da kwamfutar yadda ya kamata. |
| Hoton yana da lahani masu launi (farin ba ya kama da fari) | Daidaita launi RGB ko zaɓi zafin launi da ake so. |
| Rikici a kwance ko a tsaye akan allon |
Yi amfani da yanayin rufe Windows 7/8/10 don daidaita CLOCK da FOCUS. Danna don daidaitawa ta atomatik. |
Ƙayyadaddun bayanai
Ƙididdigar Gabaɗaya
|
Panel |
Sunan samfurin | Saukewa: CU34G2 | Saukewa: CU34G2X | ||
| Tsarin tuki | TFT launi LCD | ||||
| Viewiya Girman Hoto | 86.36 cm diagonal | ||||
| Matsakaicin pixel | 0.23175mm(H) x 0.23175mm(V) | ||||
| Bidiyo | HDMI dubawa & DP Interface | ||||
| Nuni Launi | 16.7M Launuka | ||||
| Wasu | Takaitaccen sikelin sikelin | 30-160KHZ(HDMI/DP) | 30-170KHZ (HDMI)
30-220KHZ (DP) |
||
| Girman sikanin kwance (Mafi girman) | 797.22mm ku | ||||
| Tsayin sikelin tsaye | 48-100HZ(HDMI/DP) | 48-100HZ(HDMI)
48-144HZ(DP) |
|||
| Girman Duban Tsaye (Mafi girman) | 333.72mm ku | ||||
| Mafi kyawun ƙudurin saiti | 3440×1440@60Hz | ||||
| Matsakaicin ƙuduri | 3440×1440@100Hz (HDMI/DP) | 3440×1440@144Hz (DP) | |||
| Toshe & Kunna | VESA DDC2B/CI | ||||
| Mai Haɗa Input | HDMI / DP | ||||
| Tushen wutar lantarki | 100-240V~, 50/60Hz,1.5A | ||||
|
Amfanin Wuta |
Na al'ada (Tsohon haske da bambanci) | 55W | 67W | ||
| Max. (haske = 100, bambanci = 100) | 108W | 110W | |||
| Ajiye wuta | ≤0.5W | ≤0.5W | |||
| Halayen Jiki | Nau'in Haɗawa | HDMI/DP/USB/Earphone fita | |||
| Nau'in Siginar Kebul | Mai iya cirewa | ||||
|
Muhalli |
Zazzabi | Aiki | 0° ~ 40° | ||
| Mara Aiki | -25° ~ 55° | ||||
| Danshi | Aiki | 10% ~ 85% (ba mai sanyawa) | |||
| Mara Aiki | 5% ~ 93% (ba mai sanyawa) | ||||
| Tsayi | Aiki | 0 ~ 5000m (0 ~ 16404ft) | |||
| Mara Aiki | 0 ~ 12192m (0 ~ 40000ft) | ||||
Hanyoyin Nuni da Saiti
| STANDARD | HUKUNCI | HORIZONTAL
YAWAITA (kHz) |
MA'ANANTA
YAWAITA(Hz) |
|
VGA |
640×480@60Hz | 31.469 | 59.94 |
| 640×480@72Hz | 37.861 | 72.809 | |
| 640×480@75Hz | 37.5 | 75 | |
|
Farashin SVGA |
800×600@60Hz | 37.879 | 60.317 |
| 800×600@72Hz | 48.077 | 72.188 | |
| 800×600@75Hz | 46.875 | 75 | |
|
Farashin XGA |
1024×768@60Hz | 48.363 | 60.004 |
| 1024×768@70Hz | 56.476 | 70.069 | |
| 1024×768@75Hz | 60.023 | 75.029 | |
| SXGA | 1280×1024@60Hz | 63.981 | 60.020 |
| 1280×1024@75Hz | 79.976 | 75.025 | |
| WXGA+ | 1440×900@60Hz | 55.935 | 59.887 |
| 1440×900@60Hz | 55.469 | 59.901 | |
| WSXGA | 1680×1050@60Hz | 65.290 | 59.954 |
| 1680×1050@60Hz | 64.674 | 59.883 | |
| HD | 1920×1080@60Hz | 67.5 | 60 |
|
QHD |
2560×1080@60HZ | 66 | 60 |
| 2560×1080@50HZ | 56.25 | 50 | |
| 2560×1080@120HZ | 150 | 120 | |
|
WQHD |
3440×1440@30HZ | 44.408 | 29.985 |
| 3440×1440@60HZ | 89.819 | 59.973 | |
| 3440×1440@100HZ | 150.972 | 99.982 | |
| 3440X1440@120(CU34G2X DP Only) | 181.2 | 120 | |
| 3440X1440@144(CU34G2X DP Only) | 214.56 | 144 | |
| IBM MODES | |||
| DOS | 640×350@70Hz | 31.469 | 70.087 |
| 720×400@70Hz | 31.469 | 70.087 | |
| MAGANAR MAC | |||
| VGA | 640×480@67Hz | 35.000 | 66.667 |
| Farashin SVGA | 832×624@75Hz | 49.725 | 74.551 |
| Farashin XGA | 1024×768@75Hz | 60.241 | 74.927 |
Sanya Ayyuka
| Fil A'a | Sunan siginar | Fil A'a | Sunan siginar | Fil A'a | Sunan siginar |
| 1. | Bayanan TMDS 2+ | 9. | Bayanan TMDS 0- | 17. | DDC/CEC Ground |
| 2. | TMDS Data 2 Garkuwa | 10. | TMDS agogo + | 18. | + 5V Power |
| 3. | Bayanan TMDS 2- | 11. | Garkuwan agogo na TMDS | 19. | Gano Toshe mai zafi |
| 4. | Bayanan TMDS 1+ | 12. | Kwanan TMDS | ||
| 5. | Bayanan TMDS 1Shield | 13. | CEC | ||
| 6. | Bayanan TMDS 1- | 14. | Ajiye (NC akan na'urar) | ||
| 7. | Bayanan TMDS 0+ | 15. | SCL | ||
| 8. | TMDS Data 0 Garkuwa | 16. | SDA |
20-Cable Signal Cable Signal Cable
| Fil A'a | Sunan siginar | Fil A'a | Sunan siginar |
| 1 | ML_Lane 3 (n) | 11 | GND |
| 2 | GND | 12 | ML_Lane 0 (p) |
| 3 | ML_Lane 3 (p) | 13 | Sanyawa1 |
| 4 | ML_Lane 2 (n) | 14 | Sanyawa2 |
| 5 | GND | 15 | AUX_CH (shafi) |
| 6 | ML_Lane 2 (p) | 16 | GND |
| 7 | ML_Lane 1 (n) | 17 | AUX_CH (n) |
| 8 | GND | 18 | Gano Toshe mai zafi |
| 9 | ML_Lane 1 (p) | 19 | Koma DP_PWR |
| 10 | ML_Lane 0 (n) | 20 | DP_PWR |
Toshe kuma Kunna
Toshe & Kunna fasalin DDC2B
- Wannan saka idanu yana sanye da damar VESA DDC2B bisa ga VESA DDC STANDARD. Yana ba mai saka idanu damar sanar da tsarin runduna ainihin sa kuma, dangane da matakin DDC da aka yi amfani da shi, sadar da ƙarin bayani game da iyawar nuninsa.
- DDC2B tashar bayanai ce ta gaba-gaba bisa ka'idar I2C. Mai watsa shiri na iya buƙatar bayanin EDID akan tashar DDC2B.
- www.aoc.com
- © 2019 AOC. Duka Hakkoki.
Takardu / Albarkatu
 |
Bayani na AOC CU34G2 [pdf] Manual mai amfani CU34G2 LCD Monitor, CU34G2, LCD Monitor, Kulawa |
