AMX MU-2300 Automation Controllers
Tlhahisoleseding ya Sehlahiswa
Litlhaloso:
- Mohlala: MU-Series Automation Controllers
- Tumellano: FCC Karolo ea 15, Canada EMC, EU
- Maemo a Tikoloho: Bophahamo bo ka tlase ho limithara tse 2000
- Tumellano e Khethehileng ea Naha: China
Litaelo tsa Tšebeliso ea Sehlahisoa
- Litaelo tsa Polokeho:
Pele o sebelisa li-Mu-Series Automation Controllers, ka kopo bala le ho latela litaelo tse latelang tsa polokeho:- BALA 'me U BOLOKE litaelo tsena.
- HLOKOMELA litemoso tsohle 'me U LATELA litaelo tsohle.
- O SE KE oa sebelisa haufi le metsi kapa mehloli ea mocheso.
- HLOKA FEELA ka lesela le omeletseng.
- Netefatsa hore menyako ea moea ha e thijoe nakong ea ho kenya.
- E-ba hlokolosi ha u tsamaisa lisebelisoa ho qoba likotsi tse mpe.
- Tlosa plug nakong ea lifefo tsa lehalima kapa nako e telele ea ho se sebelise.
- Fetisetsa litšebeletso ho basebetsi ba nang le litsebo haeba lisebelisoa li senyehile.
- Tlhokomeliso ea ESD:
Letšoao la temoso la ESD le bontša kotsi e ka bang teng ho tsoa ho tsoa ha motlakase o sa fetoheng. Nka mehato ea ho thibela tšenyo ea lipotoloho tse kopantsoeng. - Lintlha tsa Tumellano:
The MU-Series Automation Controllers e latela FCC Karolo ea 15, melaoana ea Canada EMC, le litekanyetso tsa EU. Etsa bonnete ba ts'ebetso e nepahetseng ho thibela tšitiso le ts'ebetso e sa batleheng. - Maemo a Tikoloho:
Sesebelisoa se loketse ho sebelisoa ka tlase ho limithara tse 2000 ka holim'a bophahamo ba leoatle. Ho e sebelisa ka holim'a bophahamo bona ho ka baka likotsi tsa polokeho.
LBH:
P: Ke lokela ho etsa eng haeba ke kopana le tšitiso ha ke sebelisa sesebelisoa?
K: Haeba tšitiso e etsahala, etsa bonnete ba hore sesebelisoa ha se bake tšitiso e kotsi 'me u amohele tšitiso efe kapa efe e amohetsoeng. Sheba mehloli e ka bang teng ea tšitiso haufinyane.
BOHLOKOA POLOKETSO LITAELO
Tlhokomeliso ea ESD
- Ho qoba tšenyo ea ESD (Electrostatic Discharge) ho likarolo tse bobebe, etsa bonnete ba hore u theohile hantle pele u ama thepa efe kapa efe ea kahare.
- Ha o sebetsa ka lisebelisoa life kapa life tse entsoeng ka lisebelisoa tsa elektroniki, ho tlameha ho lateloe mekhoa e nepahetseng ea motheo ea ESD ho etsa bonnete ba hore batho, lihlahisoa le lisebelisoa ha li lefelloe litefiso tse tsitsitseng kamoo ho ka khonehang. Lithapo tsa fatše, li-smocks tsa conductive, le limmete tse sebetsang hantle li etselitsoe morero ona. Lintho tsena ha lia lokela ho etsoa sebakeng sa heno, kaha hangata li entsoe ka lisebelisoa tse thibelang matla haholo ho ntša metsi a sa sisinyeheng ka mokhoa o sireletsehileng, ntle le ho eketsa kotsi ea motlakase ha ho ka hlaha kotsi.
- Mang kapa mang ea etsang paballo ea tšimo o lokela ho sebelisa thepa e loketseng ea ESD ea tšimo e nang le bonyane moseme o senyang o nang le khoele ea fatše le leqhoele le thathamisitsoeng ka UL le nang le mohala o mong oa fatše.
- BALA litaelo tsena.
- BOLOKA litaelo tsena.
- HLOKOMELA litemoso tsohle.
- LATELA ditaelo tsohle.
- U SE KE UA sebelisa sesebelisoa sena haufi le metsi.
- HLOKA FEELA ka lesela le omeletseng.
- U SE KE UA thiba menyetla efe kapa efe ea moea. Kenya ka litaelo tsa moetsi.
- O SE KE oa kenya haufi le mehloli efe kapa efe ea mocheso joalo ka li-radiator, lirekoto tsa mocheso, litofo kapa lisebelisoa tse ling (ho kenyeletsoa amplifiers) tse hlahisang mocheso.
- O SE KE oa hlola sepheo sa polokeho sa polaka e polarized kapa e thehileng fatše. Polarized plug e na le li-blade tse peli tse bophara ho feta tse ling. Polaka ea mofuta oa fatše e na le li-blades tse peli le prong ea boraro ea motheo. Lehare le pharaletseng kapa prong ea boraro e fanoe molemong oa polokeho ea hau. Haeba polaka e fanoeng e sa lekane sehokelong sa hau, ikopanye le setsebi sa motlakase bakeng sa ho nchafatsa se seng se sa sebetse.
- TŠIRELETSA thapo ea motlakase hore e se ke ea haptjoa kapa e penngoa, haholo-holo ha li-plug, lijana tsa ho kenya matla, le moo li tsoang teng.
- SEBELISA FEELA liphutheloana/lisebelisoa tse boletsoeng ke moetsi.
- SEBELISA FEELA ka kariki, setuloana, tripod, bracket, kapa tafole e boletsoeng ke moetsi, kapa e rekisoang ka lisebelisoa. Ha koloi e sebelisoa, ela hloko ha u tsamaisa koloi / lisebelisoa ho qoba kotsi ho tsoa ntlheng e 'ngoe.
- UNPLUG sesebelisoa sena nakong ea sefefo sa lehalima kapa ha se sa sebelisoe nako e telele.
- FIHLELA litšebeletso tsohle ho basebeletsi ba nang le tsebo. Ts'ebeletso e hlokahala ha lisebelisoa li senyehile ka tsela efe kapa efe, joalo ka thapo ea phepelo ea motlakase kapa plug e senyehile, mokelikeli o tšolohile kapa lintho li oele ka har'a lisebelisoa, sesebelisoa se pepesehetse pula kapa mongobo, ha se sebetse ka mokhoa o tloaelehileng. , kapa e lahliloe.
- U SE KE UA pepesa sesebelisoa sena hore se rothe kapa se faphatse 'me u netefatse hore ha ho lintho tse tlatsitsoeng ka maro, joalo ka linkho, tse behiloeng holim'a sesebelisoa.
- Ho hakolla sesebelisoa sena ho AC Mains ka botlalo, tlosa polaka ea phepelo ea motlakase sepokelong sa AC.
- Moo polaka e kholo kapa sesebelisoa se kopanyang lisebelisoa e le sesebelisoa sa ho hakolla, sesebelisoa sa ho hakolla se tla lula se sebetsa habonolo.
- U SE KE UA tlatsa lithapo tsa lebota kapa lithapo tse atolositsoeng ho feta tekanyo ea tsona kaha sena se ka baka ts'okelo ea motlakase kapa mollo.
SHEBELLA LITŠOANTŠISO TSENA:
Sebaka sa mohoo, ka har'a khutlotharo e lekanang, se reretsoe ho hlokomelisa mosebedisi ka boteng ba litaelo tsa bohlokoa tsa ts'ebetso le tlhokomelo (ts'ebeletso) libukeng tse tsamaeang le sehlahisoa.
Lehlaseli la lehalima le nang le letšoao la hlooho ea motsu ka har'a khutlo-tharo e lekanang le reretsoe ho lemosa mosebelisi ka boteng ba "volty e kotsi".tage” ka har'a sebaka se kampetsoeng sa sehlahisoa se ka bang boholo bo lekaneng ho beha kotsi ea ho tsosoa ke motlakase ho batho.
Tlhokomeliso ea ESD: Letšoao le ka letsohong le letšehali le bontša mongolo o mabapi le kotsi e ka bang teng e amanang le ho ntšoa ha motlakase o sa fetoheng ho tsoa mohloling o kantle (joalo ka matsoho a motho) ho ea potolohong e kopaneng, hangata e bakang tšenyo ea potoloho.- TLHOKOMELISO: Ho fokotsa kotsi ea mollo kapa ts'oaetso ea motlakase, u se ke ua pepesetsa sesebelisoa sena pula kapa mongobo.
- TLHOKOMELISO: Ha ho mehloli ea malakabe e hlobotseng - joalo ka likerese tse bonesitsoeng - e lokelang ho beoa sehlahisoa.
- TLHOKOMELISO: E tla kenngoa ke batho ba rutehileng, kapa ba nang le litsebo feela.
- TLHOKOMELISO: Sehlahisoa sena se reretsoe ho sebetsoa FEELA ho tloha voltage thathamisitsoe karolong e ka morao kapa e khothalelitsoeng, kapa e kenyellelitsoeng phepelo ea motlakase ea sehlahisoa. Ts'ebetso ho tsoa ho tse lingtagtse ling ntle le tse bonts'itsoeng li ka baka tšenyo e ke keng ea etsolloa sehlahisoa 'me tsa hlakola tiisetso ea sehlahisoa. Ts'ebeliso ea AC Plug Adapter e hlokomelisoa hobane e ka lumella sehlahisoa ho hokeloa ho vol.tages moo sehlahisoa se neng se sa etsetsoa ho sebetsa. Haeba o sa tsebe bonnete ba tšebetso e nepahetseng voltage, ka kopo ikopanye le morekisi oa heno le / kapa morekisi. Haeba sehlahisoa se na le thapo ea motlakase e ka fumanehang, sebelisa feela mofuta o fanoeng, kapa o boletsoeng, ke moetsi kapa mofani oa lehae oa lehae.
- TLHOKOMELISO: Se Bulehe! Kotsi ea Tšisinyeho ea Motlakase. Moqtaglisebelisoa tsena li kotsi bophelong. Ha ho likarolo tse ka sebelisoang ke mosebelisi kahare. Fetisetsa lits'ebeletso tsohle ho basebetsi ba tšoanelehang.
- Beha lisebelisoa haufi le sebaka se seholo sa phepelo ea motlakase 'me u netefatse hore u ka khona ho fihlella switjha ea sekhechana sa motlakase habonolo.
- TLHOKOMELISO: Sehlahisoa sena se na le libeteri tse koahetsoeng tlas'a 2006/66/EC European Directive, tse ke keng tsa lahloa ka litšila tse tloaelehileng tsa ka tlung. Ka kopo, lahla libeteri tse sebelisitsoeng hantle, ho latela melao ea lehae. U se ke ua chesa.
- TLHOKOMELISO: 45°C (113 °F) ke mocheso o phahameng ka ho fetesisa o sebetsang. Qoba ho pepesehela mocheso o feteletseng kapa serame.
RACK MOUNTING:
- Ambient e Phahameng ea Ts'ebetso - Haeba e kentsoe kopanong ea rack e koetsoeng kapa e nang le mefuta e mengata, mocheso o sebetsang oa tikoloho ea rack o ka ba moholo ho feta sebaka sa kamore. Ka hona, ho lokela ho nahanoa ka ho kenya lisebelisoa sebakeng se lumellanang le mocheso o phahameng oa mocheso (Tma) o boletsoeng ke moetsi.
- Phokotso ea Phallo ea Moea - Ho kenngoa ha thepa ka har'a rack e lokela ho ba joalo e le hore palo ea moea e hlokahalang bakeng sa ts'ebetso e sireletsehileng ea thepa e se ke ea senyeha.
- Mechanical Loading - Ho kenya lisebelisoa mohahong ho lokela ho ba boemong bo kotsi bo sa fihlelloeng ka lebaka la ho lekola ho sa lekanang ha mochini.
- Potoloho e Felletseng - Ho lokela ho nahanoa ka khokahanyo ea lisebelisoa ho potoloho ea phepelo le phello eo ho tlama ha lipotoloho ho ka bang le ts'ireletso e fetelletseng le mehala ea phepelo. Ho nahanoa ka mokhoa o nepahetseng oa litekanyetso tsa li-nameplate tsa lisebelisoa ho lokela ho sebelisoa ha ho rarolla bothata bona.
- Earthing e tšepahalang Ho lokela ho lebisoa tlhokomelo e khethehileng phepelong ea likhokahano ntle le likhokahano tse tobileng le potoloho ea lekala (mohlala, ts'ebeliso ea likhoele tsa motlakase). ”
Tlhahisoleseling ea FCC LE CANADA EMC:
Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
- Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi, le
- Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.
KANNA ICES 003 (B)/NMB-3(B)
PHATISO EA TUMELLANO EA FCC SDOC:
HARMAN Professional, Inc. e phatlalatsa hore sesebelisoa sena se lumellana le FCC karolo ea 15 ea Karoloana ea B.
HLOKOMELA:
Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, tlas'a karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ho kamohelo ea seea-le-moea kapa ea thelevishene, e ka khethoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa ho feta tsa mehato e latelang:
- Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
- Eketsa karohano pakeng tsa thepa le moamoheli.
- Hokela lisebelisoa le seketsoaneng sa potoloho se fapaneng le seo moamoheli a hokahaneng le sona.
- Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.
E amohetsoe tlas'a tokiso ea netefatso ea FCC CFR Sehlooho sa 47 Karolo ea 15 Karolo ea B.
Tlhokomeliso:
Liphetoho kapa lintlafatso tse sa amoheloang ke moetsi li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa sena.
TIKOLOHO:
Sesebelisoa sena se entsoe le ho hlahlojoa tlas'a boemo ba bophahamo bo ka tlase ho limithara tse 2000 ka holim'a bophahamo ba leoatle; e ka sebelisoa feela libakeng tse ka tlase ho limithara tse 2000 ka holim'a bophahamo ba leoatle. Ho sebelisa sesebelisoa ka holimo ho limithara tse 2000 ho ka baka kotsi e ka bang teng ea polokeho.
Letšoao lena le sebetsa ho lihlahisoa tsa tlhahisoleseling tsa elektroniki tse rekisoang Rephabliking ea People of China. Palo e bohareng ba logo ke palo ea lilemo tsa ts'ebeliso ea tikoloho.
LITSEBISO TSA HO LAPELA EU:
Mona, Harman Professional, Inc. e phatlalatsa hore mofuta oa lisebelisoa tsa MU-1000/1300/2300/3300 o lumellana le tse latelang: European Union Low Vol.tage Taelo ea 2014/35/EU; Taelo ea EMC ea European Union 2014/30/EU; European Union Restriction of Hazardous Substances Recast (RoHS2) Directive 2011/65/EU le joalo ka ha e fetotsoe ke 2015/863;
Sengoloa se felletseng sa EU Declaration of Conformity se fumaneha atereseng e latelang ea Marang-rang: https://www.amx.com/en/support_downloads/download_types/certification.
TSEBISO EA WEEE:
- The WEEE Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), e ileng ea qala ho sebetsa e le molao oa Europe ka 14/02/2014, e ile ea fella ka phetoho e khōlō ea phekolo ea lisebelisoa tsa motlakase qetellong ea bophelo.
- Sepheo sa Taelo ena ke, e le ntho e tlang pele, thibelo ea WEEE, 'me ho feta moo, ho khothaletsa tšebeliso e ncha, ho e sebelisa hape, le mekhoa e meng ea ho khutlisa litšila tse joalo ho fokotsa ho lahloa. Letšoao la WEEE sehlahisoa kapa lebokose la eona le bonts'ang pokello ea lisebelisoa tsa motlakase le tsa elektroniki le na le moqomo o kolokileng, joalo ka ha ho bonts'itsoe ka tlase.
Sehlahisoa sena ha sea lokela ho lahloa kapa ho lahleloa le litšila tse ling tsa lapeng. U na le boikarabello ba ho lahla lisebelisoa tsohle tsa hau tsa elektroniki kapa tsa motlakase ka ho fallela sebakeng se boletsoeng sa pokello bakeng sa ho sebelisa litšila tse joalo tse kotsi. Pokello e ikhethileng le ho hlaphoheloa ka nepo ha lisebelisoa tsa hau tsa elektroniki le tsa motlakase ka nako ea ho lahla ho tla re lumella ho thusa ho baballa lisebelisoa tsa tlhaho. Ho feta moo, ts'ebetso e nepahetseng ea lisebelisoa tsa litšila tsa elektroniki le tsa motlakase e tla netefatsa polokeho ea bophelo ba batho le tikoloho. Ho fumana lintlha tse ling mabapi le ho lahloa ha litšila tsa elektroniki le lisebelisoa tsa motlakase, ho khutlisoa le ho bokelloa, ka kopo ikopanye le setsi sa toropo ea heno, tšebeletso ea ho lahlela lithōle ka tlung, lebenkele moo u rekileng thepa kapa moetsi oa thepa.
Lintlha tsa Moetsi:
- Litlhaloso tsa likarolo tsa HARMAN Professional, Inc.
Aterese: 8500 Balboa Blvd. Northridge, CA 91329 USA - Khokahano ea Tsamaiso ea EU:
Harman Professional Denmark ApS Olof Palmes Allé 44, 8200 Aarhus N, Denmark - UK Regulatory Contact:
Harman Professional Solutions 2 Westside, London Road, Apsley, Hemel Hempstead, HP3 9TD, UK.
Tse ncha ke life
- E tšehetsa liprothokholo tse ngata tsa Harman ka tlhaho
Molaoli oa li-MU-Series o bua HControl, HiQnet, le ICSP ka ntle ho lebokose, e lumella ho kopanngoa ka mokhoa o se nang moeli le lisebelisoa tsa Harman tse teng. AMX touch panels, Crown DCi Amplifiers, li-keypad tsa BSS Contrio, le molumoweb Lisebelisoa tsa London kaofela li fumaneha ho molaoli ho tsoa libese tsena tsa puisano. Lisebelisoa tsa Future Harman tse tsebang HControl kaofela li tla sebetsa le balaoli ba li-MU-Series. - HControl
Harman HControl ke protocol e ncha e fanang ka lisebelisoa tse itlhalosang tse arolelanang bokhoni ba tsona ho balaoli ba hlokomelang HControl. Liparamente tse baloang le tse laolehang li fuoe molaoli ho lumella lintlafatso tse matla tsa menyetla ea taolo. - Tšehetso ea Mangolo a Tloaelehileng ea Puo
Sebakeng sa ho sebelisa puo ea mong'a NetLinx bakeng sa mohopolo oa khoebo oa sebaka se laoloang, MU-series e sebelisa lipuo tse tloaelehileng tsa ho ngola. Sena ha joale se kenyelletsa:- Python3
- JavaScript
- Java e nang le Groovy
Tšebeliso ea lipuo tse tloaelehileng e bula mamati bakeng sa lisebelisoa tse sa feleng tse fumanehang bakeng sa ho ithuta le ho tsamaisa mangolo ana. Lenaneo ha le sa tlameha ho feta ts'ebetsong ea setifikeiti sa AMX ho ithuta puo ea rona e ikhethang. Ba lokolohile ho nka thupelo leha e le efe, ho bala buka leha e le efe, kapa ho sebelisa boitsebiso leha e le bofe boo ba bo ratang ho ithuta lipuo tse teng. Ho fumana lipotso ha ho sa lekanyetsoa ho Liforamo tsa AMX kapa Tšehetso ea Tech. Liwebsaete tseo u li ratang haholo indastering joalo ka Stack Overflow li teng bakeng sa litšupiso le thuso.
- Duet Module le Driver Design Module tšehetso
Sethala sa li-MU-Series se ntse se tšehetsa li-module tsa Duet. Sena se u fa taolo ea lisebelisoa tse 1000 ho tsoa laebraring ea AMX InConcert. Lisebelisoa tse rarahaneng tse kang li-conferencers tsa video le li-server tsa mecha ea litaba li tla arolelana taolo e tšoanang e tšoanang le ea NetLinx, e u lumellang ho li kopanya ntle le ho ngola mananeo a API ea bona. Lisebelisoa tse ts'oanang li fetoha tse feto-fetohang, kahoo ho fapanyetsana pontšo e le 'ngoe bakeng sa e' ngoe e fetoha taba ea ho supa mojule o fapaneng oa Duet. Litaolo tseo mongolo o li bonang lia tšoana. - Moamoheli oa USB
Boema-kepe ba USB-A Host bo a fumaneha bakeng sa ho sebelisoa le lisebelisoa tse ngata tsa polokelo bakeng sa bokhoni bo bonolo ba ho rema lifate hammoho le ho hokela lisebelisoa tse ling joalo ka moamoheli oa FLIRC IR ho eketsa IR Hand Controls e le kenyeletso ho sistimi. - Boema-kepe ba Lenaneo la USB-C
CLI ea molaoli e fumaneha ho tsoa boema-kepeng ba USB-C e lumellang moqapi hore a hokahane ka kotloloho ho fumana le ho hlophisa thepa joalo ka aterese ea IP, lisebelisoa tse tsebahalang, mananeo a tsamaisang, le tse ling tse ngata. Sehokelo sa symmetrical USB-C se ka kenngoa ka lehlakoreng le leng. Hang ha e kentsoe, MU Controller e hlahisa e le boema-kepe ba sebele ba COM. Sebelisa lenaneo leo u le ratang la terminal ho buisana le MU ka kotloloho. - Lintlafatso tsa ICSLan
Bakeng sa mehlala e nang le ICSLan (MU-1000, MU-2300, MU-3300) aterese ea marang-rang le subnet mask li se li ka khethoa, li fana ka marang-rang a fetohang haholoanyane. ICSLan e ntse e fana ka marang-rang a ikhethileng bakeng sa lisebelisoa tse laoloang tse sa ameng khokahanyo ea LAN. Mafapha a IT a bona aterese e le 'ngoe feela ea LAN bakeng sa sistimi e felletseng.
Likaroloana
Likarolo tsa Taolo ea MU-Series
|
Lebitso (SKU) |
Likaroloana |
| MU-1000 (AMX-CCC000) | PoE Powered (802.3af - matla a tloaelehileng) |
| 1 LAN Ethernet boema-kepe | |
| 1 ICSLan Control Network port | |
| Ntho e nyane ea sebopeho - 1" x 5" x 5" | |
| DIN Rail e ka tsamaisoa ka DIN Rail Clip (AMX-CAC0001) | |
| 4GB DDR3 RAM | |
| 8 GB eMMC Storage | |
| 2x USB 2.0 Mofuta oa A Host port | |
| 1x boema-kepe ba lenaneo la USB Type C | |
| MU-1300 (AMX-CCC013) | 1 LAN Ethernet boema-kepe |
| 1 RS-232 / RS-422 / RS-485 serial port
1 RS-232-feela serial port 2 IR / Serial port Likou tse 4 tsa Digital I/O |
|
| Ntho e nyenyane ea foromo - 1 RU, 1/3 Rack Width
1 11/16 "x 5 13/16" x 5 1/8 " (42.16 limilimithara x, 147.32 limilimithara x, 130.81 limilimithara) |
|
| DIN Rail e ka tsamaisoa ka DIN Rail Clip (AMX-CAC0001) | |
| 4GB DDR3 RAM | |
| 8 GB eMMC Storage | |
| 2x USB 2.0 Mofuta oa A Host port | |
| 1x boema-kepe ba lenaneo la USB Type C | |
| MU-2300 (AMX-CCC023) | 1 LAN Ethernet boema-kepe |
| 1 RS-232 / RS-422 / RS-485 serial port
3 RS-232-feela serial port 4 IR / Serial port Likou tse 4 tsa Digital I/O 1 ICSLan Control Network Port |
|
| Rack Mounted - 1 RU | |
| 4GB DDR3 RAM | |
| 8 GB eMMC Storage | |
| 3x USB 2.0 Mofuta oa A Host port | |
| 1x boema-kepe ba lenaneo la USB Type C | |
| MU-3300 (AMX-CCC033) | 1 LAN Ethernet boema-kepe |
| 2 RS-232 / RS-422 / RS-485 serial port
6 RS-232-feela serial port 8 IR / Serial port Likou tse 8 tsa Digital I/O 1 ICSLan Control Network Port |
|
| Rack Mounted - 1 RU | |
| 4GB DDR3 RAM | |
| 8 GB eMMC Storage | |
| 3x USB 2.0 Mofuta oa A Host port | |
| 1x boema-kepe ba lenaneo la USB Type C |
MU-1000
MU-1000 (AMX-CCC000) e na le 4 GB ea onboard DDR3 RAM, mochine oa khoebo oa 8GB eMMC o sa tsitsang oa polokelo ea memori, le marang-rang a taolo ea ICSLan. E na le matla a PoE 'me e na le sebopeho se senyenyane bakeng sa ho kenya habonolo. E na le enjine ea ho ngola ea MUSE e ts'ehetsang mefuta e fapaneng ea lipuo tse tloaelehileng tsa lenaneo ho theha mohopolo oa khoebo bakeng sa sistimi ea taolo. Lenane le felletseng la lintlha tsa lisebelisoa le thathamisitsoe ka tlase.
Litlhaloso tsa MU-1000
| Litekanyo | 5.14″ x 5.04″ x 1.18″ (130.5 x 128 x 30 mm) |
| Litlhoko tsa Matla | PoE 36-57V @ 350mA Max |
| Tšebeliso ea Matla | 15.4W Maximum - PoE 802.3af Sehlopha sa 0 |
| Nako e Bohareng pakeng tsa ho hloleha (MTBF) | Lihora tse 100000 |
| Mohopolo | 4GB DDR3 RAM
8 GB eMMC |
| Boima ba 'mele | Liponto tsa 1.26 (572g) |
| Sebaka se koaletsoeng | Powder Coated Steel - Gray Pantone 10393C |
| Setifikeiti | • ICES 003 |
| • CE EN 55032 | |
| • AUS/NZ CISPR 32 | |
| • CE EN 55035 | |
| • CE EN 62368-1 | |
| • IEC 62368-1 | |
| • UL 62368-1 | |
| • VCCI CISPR 32 | |
| • RoHS / WEEE e lumellana | |
| Likarolo tsa Panel e ka Pele | |
| Boemo ba LED | RGB LED - bona Boemo ba LED Tlhaloso e qaqileng |
| Konopo ea ID | ID pushbutton e sebelisitsoeng nakong ea boot ho khutlela ho tlhophiso ea fektheri kapa firmware ea feme |
| Boema-kepe ba Lenaneo la USB-C | Khokahano ho PC bakeng sa terminal ea sebele bakeng sa tlhophiso ea MU |
| LAN Link/Mosebetsi oa LED | Ho bonesa ha o hoketswe ho netweke. Ho panya ha mesebetsi ea marang-rang |
| Sehokelo sa ICSLan/Mosebetsi oa LED | Ho bonesa ha o hoketswe ho netweke. Ho panya ha mesebetsi ea marang-rang |
| Likarolo tse ka morao tsa Panel | |
| Port ea LAN | RJ-45 10/100 BASE-T bakeng sa puisano ea Ethernet le PoE Auto MDI/MDI-X
Moreki oa DHCP |
| …MU-1000 litlhaloso li ntse li tsoela pele | |
| Boema-kepe ba ICSLan | RJ-45 10/100 BASE-T bakeng sa puisano ea Ethernet Auto MDI/MDI-X
Seva ea DHCP E fana ka marang-rang a ka thoko a taolo |
| Boema-kepe ba Sebaka sa USB | 2x Type-A USB host host port
· USB Mass Storage - bakeng sa ho rema lifate ka ntle · FLIRC – IR Receiver bakeng sa ho kenya letsoho ho laola IR |
| Litlhaloso Kakaretso: | |
| Tikoloho ya Tshebetso | · Mocheso oa ho sebetsa: 32° F (0° C) ho ea ho 122° F (50° C)
· Mocheso oa Polokelo: 14° F (-10° C) ho ea ho 140° F (60° C) · Mongobo o sebetsang: 5% ho isa ho 85% RH · Phallo ea Mocheso (E Buletsoe): 10.2 BTU/hr |
| Kenyellelitsoe Lisebelisoa | Ha ho letho |
MU-1300
MU-1300 (AMX-CCC013) e na le 4 GB ea onboard DDR3 RAM, mochine oa khoebo oa 8GB eMMC o sa tsitsang oa polokelo ea memori, le marang-rang a taolo ea ICSLan. Ke ntho e nyane ea foromo bakeng sa ho kenya habonolo. E na le enjine ea ho ngola ea MUSE e fanang ka lipuo tse fapaneng tse tloaelehileng tsa lenaneo ho theha mohopolo oa khoebo bakeng sa sistimi ea taolo. Lenane le felletseng la lintlha tsa lisebelisoa le thathamisitsoe ka tlase.
Litlhaloso tsa MU-1300
| Litekanyo | 5.8″ x 5.16″ x 1.66″ (147.32mm x 131mm x 42.16 mm) |
| Litlhoko tsa Matla | • DC input voltage (e tloaelehileng): 12 VDC
• Draw ea DC: 2.17A Max • DC range, voltage: 9-18 VDC |
| Tšebeliso ea Matla | Li-Watts tse 26 tsa Max |
| Nako e Bohareng pakeng tsa ho hloleha (MTBF) | Lihora tse 100000 |
| Mohopolo | 4GB DDR3 RAM
8 GB eMMC |
| Boima ba 'mele | 1.58 lb (718g) |
| Sebaka se koaletsoeng | Powder Coated Steel - Gray Pantone 10393C |
| Setifikeiti | • ICES 003
• CE EN 55032 • AUS/NZ CISPR 32 • CE EN 55035 • CE EN 62368-1 • IEC 62368-1 • UL 62368-1 • VCCI CISPR 32 • RoHS / WEEE e lumellana |
| Likarolo tsa Panel e ka Pele | |
| Boemo ba LED | RGB LED - bona Boemo ba LED Tlhaloso e qaqileng |
| Konopo ea ID | ID pushbutton e sebelisitsoeng nakong ea boot ho khutlela ho tlhophiso ea fektheri kapa firmware ea feme |
| Boema-kepe ba Lenaneo la USB-C | Khokahano ho PC bakeng sa terminal ea sebele bakeng sa tlhophiso ea MU |
| USB-A Host Port | Type-A USB host host port
· USB Mass Storage - bakeng sa ho rema lifate ka ntle · FLIRC – IR Receiver bakeng sa ho kenya letsoho ho laola IR |
| LAN Link/Mosebetsi oa LED | Ho bonesa ha o hoketswe ho netweke. Ho panya ha mesebetsi ea marang-rang |
| P1 / P2 LED | Li-LED tse ka hlophisehang li fumaneha ho laola mongolo |
| Sesebelisoa sa TX / RX LED | Li-LED tsa ts'ebetso bakeng sa boema-kepe bo bong le bo bong ka lehlakoreng le leng. Ho panya ha mosebetsi. |
| IR TX LED | Li-LED tsa tšebetso bakeng sa boema-kepe ba IR/Serial. Ho panya ha phetiso. |
| I/O LED | Letšoao la LED la Boemo ba I/O. E butswe bakeng sa tlhahiso ya dijithale kapa tlhahiso e sebetsa |
| Likarolo tse ka morao tsa Panel | |
| Matla | Sehokelo sa 3.5mm Phoenix 2-pin se nang le likurufu tsa ho boloka bakeng sa 12vdc input |
| Port ea LAN | RJ-45 10/100 BASE-T bakeng sa puisano ea Ethernet Auto MDI/MDI-X
Moreki oa DHCP |
| Serial Port 2 | 3.5mm sehokelo sa Phoenix 5-pin. RS232 ka ho ts'oarana ka matsoho ka hardware |
| 20 pin double stack Phoenix sehokelo | Likhokahano tsohle tse setseng tsa taolo ea lisebelisoa:
· Lithako tse tlase tse 10 - RS-232/422/485 hammoho le hw handshaking + matla · Lipini tse 6 tse ka Holimo Leqeleng – 4 Input/Output mmoho le Ground le Matla · Lipini tse 4 tse ka Holimo - 2x IR/Serial output port |
| Boema-kepe ba Sebaka sa USB | 2x Type-A USB host host port
· USB Mass Storage - bakeng sa ho rema lifate ka ntle · FLIRC – IR Receiver bakeng sa ho kenya letsoho ho laola IR |
| Litlhaloso Kakaretso: | |
| Tikoloho ya Tshebetso | · Mocheso oa ho sebetsa: 32° F (0° C) ho ea ho 122° F (50° C)
· Mocheso oa Polokelo: 14° F (-10° C) ho ea ho 140° F (60° C) · Mongobo o sebetsang: 5% ho isa ho 85% RH · Phallo ea Mocheso (E Buletsoe): 10.2 BTU/hr |
| Kenyellelitsoe Lisebelisoa | · 1x 2-pin 3.5 mm mini-Phoenix PWR sehokelo
· 1x 6-pin 3.5 mm mini-Phoenix I/O sehokelo · 1x 10-pin 3.5mm mini-Phoenix RS232/422/485 sehokelo · 1x 5-pin 3.5mm mini-Phoenix RS232 sehokelo · 1x CC-NIRC, IR Emitters (FG10-000-11) |
MU-2300
MU-2300 (AMX-CCC023) e na le 4 GB ea onboard DDR3 RAM, mochine oa khoebo oa 8GB eMMC o sa tsitsang oa polokelo ea memori, le marang-rang a taolo ea ICSLan. E hahiloe bakeng sa ho kenya mochine oa thepa. E na le enjine ea ho ngola ea MUSE e fanang ka lipuo tse fapaneng tse tloaelehileng tsa lenaneo ho theha mohopolo oa khoebo bakeng sa sistimi ea taolo. Lenane le felletseng la lintlha tsa lisebelisoa le thathamisitsoe ka tlase.
Litlhaloso tsa MU-2300
| Litekanyo | 1 RU – 17.32″ x 9.14″ x 1.7″ (440mm x 232.16mm x 43.3 mm) |
| Litlhoko tsa Matla | • DC input voltage (e tloaelehileng): 12 VDC
• Draw ea DC: 3A Max • DC range, voltage: 9-18 VDC |
| Tšebeliso ea Matla | Li-Watts tse 36 tsa Max |
| Nako e Bohareng pakeng tsa ho hloleha (MTBF) | Lihora tse 100000 |
| Mohopolo | 4GB DDR3 RAM
8 GB eMMC |
| Boima ba 'mele | 6.05 lb (2.75kg) |
| Sebaka se koaletsoeng | Powder Coated Steel - Gray Pantone 10393C |
| Setifikeiti | • ICES 003
• CE EN 55032 • AUS/NZ CISPR 32 • CE EN 55035 • CE EN 62368-1 • IEC 62368-1 • UL 62368-1 • VCCI CISPR 32 • RoHS / WEEE e lumellana |
| Likarolo tsa Panel e ka Pele | |
| Boemo ba LED | RGB LED - bona Boemo ba LED Tlhaloso e qaqileng |
| Konopo ea ID | ID pushbutton e sebelisitsoeng nakong ea boot ho khutlela ho tlhophiso ea fektheri kapa firmware ea feme |
| Boema-kepe ba Lenaneo la USB-C | Khokahano ho PC bakeng sa terminal ea sebele bakeng sa tlhophiso ea MU |
| USB-A Host Port | Type-A USB host host port
· USB Mass Storage - bakeng sa ho rema lifate ka ntle · FLIRC – IR Receiver bakeng sa ho kenya letsoho ho laola IR |
| LAN Link/Mosebetsi oa LED | Ho bonesa ha o hoketswe ho netweke. Ho panya ha mesebetsi ea marang-rang |
| P1 / P2 LED | Li-LED tse ka hlophisehang li fumaneha ho laola mongolo |
| Sesebelisoa sa TX / RX LED | Li-LED tsa ts'ebetso bakeng sa boema-kepe bo bong le bo bong ka lehlakoreng le leng. Ho panya ha mosebetsi. |
| IR TX LED | Li-LED tsa tšebetso bakeng sa boema-kepe ba IR/Serial. Ho panya ha phetiso. |
| I/O LED | Letšoao la LED la Boemo ba I/O: E buletsoe bakeng sa ho kenya letsoho kapa tlhahiso ea dijithale e sebetsa |
| Hlahisa LED | Letšoao la LED la boemo ba Relay: Buletsoe bakeng sa relay e kopanetsoeng |
| Likarolo tse ka morao tsa Panel | |
| Matla | Sehokelo sa 3.5mm Phoenix 2-pin se nang le likurufu tsa ho boloka bakeng sa 12vdc input |
| Port ea LAN | RJ-45 10/100 BASE-T bakeng sa puisano ea Ethernet Auto MDI/MDI-X
Moreki oa DHCP |
| Boema-kepe ba ICSLan | RJ-45 10/100 BASE-T bakeng sa puisano ea Ethernet Auto MDI/MDI-X
Seva ea DHCP E fana ka marang-rang a ka thoko a taolo |
| RS-232/422/485 Boema-kepe ba Pele | 3.5 mm sehokelo sa Phoenix 10-pin
· 12VDC @0.5A · RX- Kenyelletso ea mohala o leka-lekaneng bakeng sa RS-422/485 · RX+ Balanced line input bakeng sa RS-422/485 · TX- E leka-lekaneng line tlhahiso bakeng sa RS-422/485 · TX+ Balanced line output for RS-422/485 · RTS e Itokiselitse ho Romela Bakeng sa Tšoaro ea Handware ea Hardware · CTS e Hlakile ho Romela Bakeng sa ho Kopana ka letsoho ha Hardware · TXD Unbalanced line e hlahisoang bakeng sa RS-232 · Kenyelletso ea mohala o sa leka-lekanang oa RXD bakeng sa RS-232 · GND - Sebaka sa pontšo bakeng sa RS-232 |
| RS-232 Ports 2-4 | 3.5 mm sehokelo sa Phoenix 5-pin
· RTS e Itokiselitse ho Romela Bakeng sa Tšoaro ea Handware ea Hardware · CTS e Hlakile ho Romela Bakeng sa ho Kopana ka letsoho ha Hardware · TXD Unbalanced line e hlahisoang bakeng sa RS-232 · Kenyelletso ea mohala o sa leka-lekanang oa RXD bakeng sa RS-232 · GND - Sebaka sa pontšo bakeng sa RS-232 |
| Phetiso ea 1-4 | 3.5mm sehokelo sa Phoenix 8-pin
Lipara tse 4 – Tlhahiso ea ho Koala ea Kopana bakeng sa Hangata Bula lebitso |
| IR 1-4 | 3.5mm sehokelo sa Phoenix 8-pin
Lipara tse 4 - IR/Serial output + fatše |
| I/O 1-4 | 3.5 mm sehokelo sa Phoenix 6-pin
· 12VDC @0.5A · 4x I/0 Pins e ka hlophisoa joalo ka Analog In, Digital In, kapa Digital Out · Fatše |
| Boema-kepe ba Sebaka sa USB | 2x Type-A USB host host port
· USB Mass Storage - bakeng sa ho rema lifate ka ntle · FLIRC – IR Receiver bakeng sa ho kenya letsoho ho laola IR |
| Litlhaloso Kakaretso: | |
| Tikoloho ya Tshebetso | · Mocheso oa ho sebetsa: 32° F (0° C) ho ea ho 122° F (50° C)
· Mocheso oa Polokelo: 14° F (-10° C) ho ea ho 140° F (60° C) · Mongobo o sebetsang: 5% ho isa ho 85% RH · Phallo ea Mocheso (E Buletsoe): 10.2 BTU/hr |
| Kenyellelitsoe Lisebelisoa | · 1x 2-pin 3.5 mm mini-Phoenix PWR sehokelo
· 1x 6-pin 3.5 mm mini-Phoenix I/O sehokelo · 1x 10-pin 3.5mm mini-Phoenix RS232/422/485 sehokelo · 3x 5-pin 3.5mm mini-Phoenix RS232 lihokelo · 2x CC-NIRC, IR Emitters (FG10-000-11) · Litsebe tsa rack tse 2x tse tlosoang |
MU-3300
MU-3300 (AMX-CCC033) e na le 4 GB ea onboard DDR3 RAM, mochine oa khoebo oa 8GB eMMC o sa tsitsang oa polokelo ea memori, le marang-rang a taolo ea ICSLan. E hahiloe bakeng sa ho kenya mochine oa thepa. E na le enjine ea ho ngola ea MUSE e fanang ka lipuo tse fapaneng tse tloaelehileng tsa lenaneo ho theha mohopolo oa khoebo bakeng sa sistimi ea taolo. Lenane le felletseng la lintlha tsa lisebelisoa le thathamisitsoe ka tlase.
Litlhaloso tsa MU-3300
| Litekanyo | 1 RU – 17.32″ x 9.14″ x 1.7″ (440mm x 232.16mm x 43.3 mm) |
| Litlhoko tsa Matla | • DC input voltage (e tloaelehileng): 12 VDC
• Draw ea DC: 3A • DC range, voltage: 9-18 VDC |
| Tšebeliso ea Matla | Li-Watts tse 36 tsa Max |
| Nako e Bohareng pakeng tsa ho hloleha (MTBF) | Lihora tse 100000 |
| Mohopolo | 4GB DDR3 RAM
8 GB eMMC |
| Boima ba 'mele | 6.26 lb (2.84kg) |
| Sebaka se koaletsoeng | Powder Coated Steel - Gray Pantone 10393C |
| Setifikeiti | • ICES 003
• CE EN 55032 • AUS/NZ CISPR 32 • CE EN 55035 • CE EN 62368-1 • IEC 62368-1 • UL 62368-1 • VCCI CISPR 32 • RoHS / WEEE e lumellana |
| Likarolo tsa Panel e ka Pele | |
| Boemo ba LED | RGB LED - bona Boemo ba LED Tlhaloso e qaqileng |
| Konopo ea ID | ID pushbutton e sebelisitsoeng nakong ea boot ho khutlela ho tlhophiso ea fektheri kapa firmware ea feme |
| Boema-kepe ba Lenaneo la USB-C | Khokahano ho PC bakeng sa terminal ea sebele bakeng sa tlhophiso ea MU |
| USB-A Host Port | Type-A USB host host port
· USB Mass Storage - bakeng sa ho rema lifate ka ntle · FLIRC – IR Receiver bakeng sa ho kenya letsoho ho laola IR |
| LAN Link/Mosebetsi oa LED | Ho bonesa ha o hoketswe ho netweke. Ho panya ha mesebetsi ea marang-rang |
| P1 / P2 LED | Li-LED tse ka hlophisehang li fumaneha ho laola mongolo |
| Sesebelisoa sa TX / RX LED | Li-LED tsa ts'ebetso bakeng sa boema-kepe bo bong le bo bong ka lehlakoreng le leng. Ho panya ha mosebetsi. |
| IR TX LED | Li-LED tsa tšebetso bakeng sa boema-kepe ba IR/Serial. Ho panya ha phetiso. |
| I/O LED | Letšoao la LED la Boemo ba I/O: E buletsoe bakeng sa ho kenya letsoho kapa tlhahiso ea dijithale e sebetsa |
| Hlahisa LED | Letšoao la LED la boemo ba Relay: Buletsoe bakeng sa relay e kopanetsoeng |
| Likarolo tse ka morao tsa Panel | |
| Matla | Sehokelo sa 3.5mm Phoenix 2-pin se nang le likurufu tsa ho boloka bakeng sa 12vdc input |
| Port ea LAN | RJ-45 10/100 BASE-T bakeng sa puisano ea Ethernet Auto MDI/MDI-X
Moreki oa DHCP |
| Boema-kepe ba ICSLan | RJ-45 10/100 BASE-T bakeng sa puisano ea Ethernet Auto MDI/MDI-X
Seva ea DHCP E fana ka marang-rang a ka thoko a taolo |
| RS-232/422/485 Port 1 & 5 | 3.5 mm sehokelo sa Phoenix 10-pin
· 12VDC @0.5A · RX- Kenyelletso ea mohala o leka-lekaneng bakeng sa RS-422/485 · RX+ Balanced line input bakeng sa RS-422/485 · TX- E leka-lekaneng line tlhahiso bakeng sa RS-422/485 · TX+ Balanced line output for RS-422/485 · RTS e Itokiselitse ho Romela Bakeng sa Tšoaro ea Handware ea Hardware · CTS e Hlakile ho Romela Bakeng sa ho Kopana ka letsoho ha Hardware · TXD Unbalanced line e hlahisoang bakeng sa RS-232 · Kenyelletso ea mohala o sa leka-lekanang oa RXD bakeng sa RS-232 · GND - Sebaka sa pontšo bakeng sa RS-232 |
| RS-232 Ports 2-4 & 6-8 | 3.5 mm sehokelo sa Phoenix 5-pin
· RTS e Itokiselitse ho Romela Bakeng sa Tšoaro ea Handware ea Hardware · CTS e Hlakile ho Romela Bakeng sa ho Kopana ka letsoho ha Hardware · TXD Unbalanced line e hlahisoang bakeng sa RS-232 · Kenyelletso ea mohala o sa leka-lekanang oa RXD bakeng sa RS-232 · GND - Sebaka sa pontšo bakeng sa RS-232 |
| Phetiso ea 1-8 | 3.5mm sehokelo sa Phoenix 8-pin
Lipara tse 4 – Tlhahiso ea ho Koala ea Kopana bakeng sa Hangata Bula lebitso |
| IR 1-8 | 3.5mm sehokelo sa Phoenix 8-pin
Lipara tse 4 - IR/Serial output + fatše |
| I/O 1-8 | 3.5 mm sehokelo sa Phoenix 6-pin
· 12VDC @0.5A · 4x I/0 Pins e ka hlophisoa joalo ka Analog In, Digital In, kapa Digital Out · Fatše |
| Boema-kepe ba Sebaka sa USB | 2x Type-A USB host host port
· USB Mass Storage - bakeng sa ho rema lifate ka ntle · FLIRC – IR Receiver bakeng sa ho kenya letsoho ho laola IR |
| Litlhaloso Kakaretso: | |
| Tikoloho ya Tshebetso | · Mocheso oa ho sebetsa: 32° F (0° C) ho ea ho 122° F (50° C)
· Mocheso oa Polokelo: 14° F (-10° C) ho ea ho 140° F (60° C) · Mongobo o sebetsang: 5% ho isa ho 85% RH · Phallo ea Mocheso (E Buletsoe): 10.2 BTU/hr |
| Kenyellelitsoe Lisebelisoa | · 1x 2-pin 3.5 mm mini-Phoenix PWR sehokelo
· 2x 6-pin 3.5 mm mini-Phoenix I/O likhokahanyo · 2x 8-pin 3.5 mm mini-Phoenix Relay likhokahanyo · 2x 10-pin 3.5mm mini-Phoenix RS232/422/485 likhokahanyo · 6x 5-pin 3.5mm mini-Phoenix RS232 lihokelo · 2x CC-NIRC, IR Emitters (FG10-000-11) · Litsebe tsa rack tse 2x tse tlosoang |
Ho kenya selaoli
- Ho hlophisoa ha MU-2300 le MU-3300
Sebelisa libakete tsa liraka (tse fanoeng le MU-2300/3300) bakeng sa ho kenya liraka tsa thepa. Tlosa li-brackets tse ntseng li kenngoa 'me u sebelise maoto a rabara ho ea tlaase ho selaoli bakeng sa ho kenya lisebelisoa tse bataletseng. - Ho kenya Controller ka har'a Rack ea Thepa
MU-2300/3300 sekepe se seng le se seng se nang le litsebe tsa rack tse ntšoang bakeng sa ho kenngoa ka har'a mochini oa lisebelisoa. - Litaelo tsa Tšireletso ea Rack Mount bakeng sa MU-2300 le MU-3300
Etsa bonnete ba hore u latela litaelo tsena tsa bohlokoa tsa polokeho ha u kenya molaoli oa hau oa bohareng:- Haeba e kentsoe ka har'a kopano ea rack e koetsoeng kapa ea li-multi-unit, mocheso o sebetsang oa tikoloho ea rack o ka ba moholo ho feta sebaka sa kamore. Ka hona, ho lokela ho nahanoa ka ho kenya lisebelisoa sebakeng se lumellanang le mocheso o phahameng oa 60 ° C (140 ° F).
- Ho kenya lisebelisoa ka har'a rack e lokela ho ba joalo e le hore palo ea moea e hlokahalang bakeng sa ts'ebetso e sireletsehileng ea thepa e se ke ea senyeha.
- Ho kenya lisebelisoa ka har'a rack e lokela ho ba joalo hore boemo bo kotsi bo se ke ba finyelloa ka lebaka la ho kenya mochine o sa lekaneng.
- Ho lokela ho nahanoa ka khokahanyo ea lisebelisoa ho potoloho ea phepelo le phello eo ho tlatsoa ha lipotoloho ho ka bang le eona ts'ireletsong ea morao-rao le likhoele tsa phepelo. Ho nahanoa ka mokhoa o nepahetseng oa litekanyetso tsa li-nameplate tsa lisebelisoa ho lokela ho sebelisoa ha ho rarolla bothata bona.
- Thepa e ka tšeptjoang ea lisebelisoa tse kentsoeng ka rack e lokela ho bolokoa. Tlhokomelo e khethehileng e lokela ho fanoa ho fana ka likhokahano ntle le likhokahano tse tobileng potolohong ea lekala (mohlala, tšebeliso ea likhoele tsa motlakase).
HLOKOMELA:
Ho qoba ho pheta-pheta ho kengoa, leka lithapo tse kenang ka ho hokela likhokahanyo tsa Controller libakeng tsa bona tsa theminale le ho sebelisa matla. Netefatsa hore yuniti e fumana matla le hore e sebetsa hantle. Hakolla pheletso ea thapo ea motlakase ho tsoa phepelong ea motlakase e tsamaellanang le 12 VDC.
- Sebelisa li-screw tse fanoeng #8-32 ho sireletsa litsebe tsa rack mahlakoreng a molaoli. U ka hokela litsebe tsa rack ka lehlakoreng le ka pele kapa le ka morao bakeng sa ho kenya ka pele kapa ka morao.
- Tsamaisa yuniti ka har'a rack ho fihlela masoba a sehokelo, mahlakoreng ka bobeli, a hokahana le libaka tsa ona tse holima masakaneng.
- Hlakola lithapo ka lesoba la rake la thepa. Lumella hore ho be le khoebo e lekaneng ka har'a likhoele ho amohela motsamao nakong ea ts'ebetso ea ho kenya.
- Hokela hape lithapo tsohle sebakeng sa tsona se nepahetseng sa mohloli/terminal. Sheba karolo ea Wiring le likhokahano leqepheng la XXX bakeng sa lintlha tse ling tse mabapi le likhokahano. Netefatsa hore pheletso ea thapo ea motlakase ha e ea hokeloa phepelong ea motlakase pele o hokela sehokelo sa matla a 2-pin.
- Sireletsa molaoli ho raka ka ho sebelisa li-screw tse 'ne #10-32 tse fanoeng ka har'a khiti.
- Kenya matla yuniti ho phethela ho instola.
Ho hlophisoa ha MU-1000 le MU-1300
Likhetho tsa ho kenya MU-1000 le MU-1300 ke tse latelang:
- Ho kenya rack ka AVB-VSTYLE-RMK-1U, V Style Module Rack Mounting Tray (FG1010-720)
- Ho hlomamisa bokaholimo ka AVB-VSTYLE-SURFACE-MNT, V Style Single Module Surface Mount (FG1010-722)
- Ho kenya seporo sa DIN ka VSTYLE DIN Rail Clip (AMX-CAC0001)
Sheba Likhetho tsa ho Mounting bakeng sa Tataiso ea ho Qala ka Potlako ea Li-module tsa V e kenyellelitsoeng le lisebelisoa tse fapaneng tsa ho hlomamisa bakeng sa litaelo tsa ho kenya MU-1000 le MU-1300. MU-1000 le MU-1300 le tsona li na le maoto a rabara ao u ka a sebelisang ho ea tlase ho yuniti bakeng sa ho beoa ka holim'a tafole.
Likarolo tsa Panel e ka Pele
Likarolo tse latelang li thathamisa likarolo tse ka pele ho balaoli ba li-MU-Series. Karolo e 'ngoe le e' ngoe e hlahisoa ho balaoli bohle ba li-MU-Series ntle le moo ho boletsoeng.
Lenaneo Port
- Phanele e ka pele ea mefuta eohle e na le kou e le 'ngoe ea USB-C bakeng sa ho hokela molaoli ho PC ka thapo ea USB.
- Boema-kepe ba Lenaneo bo sebelisa thapo e tloaelehileng ea Type-C-to-Type-A kapa Type-C-to-Type-C ea USB e tšehetsang matshwao a USB 2.0/1.1 ho hokela komporong. Ha o hokahane, o ka sebelisa lenaneo leo u le ratang haholo ho buisana le MU ka kotloloho.
FEIE. 9 USB-C Program boema-kepe Ho MU-1000 (Ka ho le letšehali), MU-1300 (Bohareng), le MU-2300/3300 (Ka ho le letona)
Boema-kepe ba USB
- Karolo e ka pele ea mefuta eohle ntle le MU-1000 e na le kou e le 'ngoe ea USB ea Mofuta oa A e sebelisoang ka sesebelisoa sa polokelo ea bongata.
- HLOKOMELA: Boema-kepe bona ba USB bo tšehetsa FAT32 feela file tsamaiso.
- Boema-kepe bona ba USB (FIG. 10) bo sebelisa thapo e tloaelehileng ea USB ho hokela polokelong efe kapa efe ea bongata kapa lisebelisoa tsa peripheral.
Li-LED
Karolo ena e fana ka lintlha tsa li-LED tse fapaneng karolong e ka pele ea balaoli ba li-MU-Series.
Li-LED tsa Boemo bo Akaretsang
Li-LED tsa Boemo ba Kakaretso li kenyelletsa Lihokelo / Ketsahalo le li-LED tsa Boemo. Li-LED tsena li hlaha mefuteng eohle ea balaoli ba li-MU-Series.
- Sehokelo/Ketso - E khantša botala ha sehokelo se le holimo ebe se tima ha pakete ea data e romelloa kapa e amoheloa.
- Boemo - Letoto la MU le na le boemo bo le bong bo hlakileng ba mebala e meraro ea LED. Tafole e latelang e thathamisa mebala ea LED le lipaterone tsa boemo ba LED.
| Mmala | Sekhahla | Boemo |
| Bosehla | Tiileng | Ho qala |
| Botala | Tiileng | E qaqisitsoe |
| Botala | Butle | Lenaneo le sebetsa |
| Boputsoa | Ka potlako | Ntlafatso ea firmware |
| Bosoeu | Ka potlako | Konopo ea ID e Tšoaroe (E lokollotsoe bakeng sa Fumana phatlalatso ea Molaetsa) |
| Bosehla | Ka potlako | Konopo ea ID e Tšoaroe (E lokollotsoe bakeng sa ho seta bocha) |
| Khubedu | Ka potlako | Konopo ea ID e Tšoaroe (E lokollotsoe bakeng sa ho seta fektheri bocha) |
| Magenta | E tiileng/ E butle | Phoso ea ho hokela likoung tse ahiloeng |
Ka kopo, sheba konopo ea ID ea Push bakeng sa lintlha tse qaqileng tsa Konopo ea ID/Seta Botjha boitšoaro.
- Li-LED tsa ICSLAN
- The ICSLAN LEDs botala bo khanyang ha ho na le sehokelo se sebetsang boema-kepeng bo tsamaisanang ba ICSLAN. Lebone lea tima ha pakete ea data e romelloa kapa e amoheloa.
- MU-1000, MU-2300 le MU-3300 ka 'ngoe e na le LED e le 'ngoe ea ICSLAN.
- LITŠOANTŠISO TSA LITŠOANTŠISO
- Li-LED tsa SERIAL ke lihlopha tse peli tsa li-LED tse khanyang ho bontša hore likou tsa RS-232 li fetisetsa kapa li amohela RS-232, 422, kapa 485 data (e khubelu = TX, mosehla = RX). Lebone lea tima ha pakete ea data e romelloa kapa e amoheloa.
- MU-3300 e na le lihlopha tse peli tsa li-LED tse robeli tsa SERIAL. MU-2300 e na le lihlopha tse peli tsa li-LED tse 'nè. TheMU-1300 e na le lihlopha tse peli tsa li-LED tse peli
- RELAYS LEDs
- Li-LED tsa RELAYS li khanya bofubelu ho bontša hore boema-kepe bo tsamaisanang le bona bo sebetsa. Lebone lea tima ha boema-kepe ba relay bo sa sebetsa.
- MU-3300 e na le li-LED tse robeli tsa RELAY. MU-2300 e na le li-LED tse 'nè tsa RELAY.
- IR/SERIAL LEDs
- Li-IR / SERIAL LEDs li khanya bofubelu ho bontša hore IR / Serial port e tsamaisanang e fetisetsa data.
- MU-3300 e na le li-LED tse robeli tsa IR/SERIAL. MU-2300 e na le li-LED tse 'ne tsa IR/SERIAL. MU-1300 e na le li-LED tse peli tsa IR.
- Li-LED tsa I/O
- Li-LED tsa I/O tse bosehla bo bobebe ho bontša hore boema-kepe ba I/O bo sebetsang bo sebetsa.
- MU-3300 e na le li-LED tse robeli tsa I/O. MU-1300 le MU-2300 li na le li-LED tse 'ne tsa I/O.
Wiring le Mahokelo
- Fetileview
Khaolo ena e fana ka lintlha, litlhaloso, litšoantšo tsa lithapo, le lintlha tse ling tsa bohlokoa bakeng sa likou tsohle le lihokelo tse fumanehang ho balaoli ba li-MU-Series. - Li-ports tsa serial
Balaoli ba li-MU-Series e 'ngoe le e' ngoe e na le likou tsa lisebelisoa tsa serial tse tšehetsang liprothokholo tsa puisano tsa RS-232 kapa RS-232, RS-422, le RS-485. Boema-kepe bo bong le bo bong bo tšehetsa lintlha tse latelang:- XON/XOFF (ho bulela/fetisa ho tima)
- CTS/RTS (ho hlakile hore e ka romela/e loketse ho romela)
- 300-115,200 sekhahla sa baud
RS-232 Boema-kepe
Likou tsa RS-232 (likou tsa 2-4 le 5-8 ho MU-3300; likou tsa 2-4 ho MU-2300; koung ea 2 ho MU-1300) ke likhokahano tsa 5-pin 3.5 mm Phoenix tse sebelisetsoang ho hokahanya A. /V mehloli le lipontšo. Likou tsena li ts'ehetsa mekhoa e mengata ea puisano ea RS-232 bakeng sa phetiso ea data.
Tafole e latelang e thathamisa li-pinouts tsa likou tsa RS-232.
| RS-232 Port Pinout | |
| Letshwao | Mosebetsi |
| GND | Sebaka sa Letšoao |
| RXD | Fumana Boitsebiso |
| TXD | Fetisetsa Lintlha |
| CTS | Hlakileng ho Romela |
RS-232/422/485 Boema-kepe
Likou tsa RS-232/422/485 (likou tsa 1 le 5 ho MU-3300; koung ea 1 ho MU-1300/2300) ke likhokahano tsa Phoenix tsa 10-pin 3.5 mm tse sebelisetsoang ho hokahanya mehloli ea A/V le lipontšo.
Likou tsena li tšehetsa mekhoa e mengata ea puisano ea RS-232, RS-422, le RS-485 bakeng sa phetiso ea data.
| RS-232/422/485 Pinout | ||||||
| Tlhophiso ea Boema-kepe | ||||||
| Letshwao | Mosebetsi | RS-232 | RS-422 | RS-485 | ||
| GND | Sebaka sa Letšoao | X | ||||
| RXD | Fumana Boitsebiso | X | ||||
| TXD | Fetisetsa Lintlha | X | ||||
| CTS | Hlakileng ho Romela | X | ||||
| RTS | Kopa ho
Romela |
X | ||||
| TX+ | Fetisetsa Lintlha | X | X | khoele ho RX+ | ||
| TX- | Fetisetsa Lintlha | X | X | khoele ho RX- | ||
| RX+ | Fumana Boitsebiso | X | X | khoele ho TX+ | ||
| EA-XNUMX-RX | Fumana Boitsebiso | X | X | khoele ho TX- | ||
| 12VDC | Matla | |||||
Relay Ports
| Relay Pinout | |||
| Letshwao | Mosebetsi | Letshwao | Mosebetsi |
| 1A | Relay 1 Tloaelehileng | 1B | Relay 1 NO |
| 2A | Relay 2 Tloaelehileng | 2B | Relay 2 NO |
| 3A | Relay 3 Tloaelehileng | 3B | Relay 3 NO |
| 4A | Relay 4 Tloaelehileng | 4B | Relay 4 NO |
| 5A | Relay 5 Tloaelehileng | 5B | Relay 5 NO |
| 6A | Relay 6 Tloaelehileng | 6B | Relay 6 NO |
| 7A | Relay 7 Tloaelehileng | 7B | Relay 7 NO |
| 8A | Relay 8 Tloaelehileng | 0B | Relay 8 NO |
- Lihokelo li ngotsoe A le B
- Li-relay tsena li laoloa ka boikemelo, li arotsoe, 'me hangata lia buleha
- Mabitso a relay a fuoe lintlha tsa boholo ba 1 A @ 0-24 VAC kapa 0-28 VDC (mojaro o hanyetsanang)
- Haeba ho ratoa, ho fanoa ka sehokelo sa tšepe ho aba 'tloaelehileng' har'a li-relay tse ngata.
I/O Maemakepe
E ka hlophisoa joalo ka voltage sensing kapa tlhahiso ea dijithale
| I/O – Pinout | |
| Letshwao | Mosebetsi |
| GND | Sebaka sa Letšoao |
| 1-4 | I/O e ka hlophisoang ka bomong |
| +12vdc | VDC |
- Pini e 'ngoe le e' ngoe e ka hlophisoa ka bonngoe joalo ka voltage ho kenya maikutlo kapa tlhahiso ea dijithale
- Litlhophiso tsa "threshold" li teng ho fumana lintlha tse phahameng / tse tlase bakeng sa tlhahiso ea digital le molumo o hlokahalangtage fetoha ho hlahisa ntlafatso
- Digital Output e ka sutumelletsa kapa ea hula 100mA
IR/SERIAL Port
E ka hlophisoa e le emulation ea taolo ea IR kapa 1-way serial
| IR/S Port Pinout - MU-2300 & MU-3300 boema-kepe bo tlase | |||
| Letshwao | Mosebetsi | Letshwao | Mosebetsi |
| 1- | IR 1 GND | 3- | IR 3 GND |
| 1+ | IR 1 Letšoao | 3+ | IR 3 Letšoao |
| 2- | IR 2 GND | 4- | IR 4 GND |
| 2+ | IR 2 Letšoao | 4+ | IR 4 Letšoao |
| IR/S Port Pinout – MU-3300 kou e ka holimo | |||
| Letshwao | Mosebetsi | Letshwao | Mosebetsi |
| 5- | IR 5 GND | 7- | IR 7 GND |
| 5+ | IR 5 Letšoao | 7+ | IR 7 Letšoao |
| 6- | IR 6 GND | 8- | IR 8 GND |
| 6+ | IR 6 Letšoao | 8+ | IR 8 Letšoao |
- Para e 'ngoe le e 'ngoe e ka hlophisoa e le IR kapa 1-way RS-232
- Litefiso tsa Baud bakeng sa RS-232 li na le moeli. Boholo ba Baud ke 19200 ka mokhoa oa DATA
- RS-232 voltages ke 0-5v, eseng + -12v. Sena se fokotsa sebaka se phahameng ho latela khanyetso ea cable ho <10 ft
- Mokhanni oa IR o fihla ho 1.142 MHz
- Likou tsohle li ka sebelisoa ka nako e le 'ngoe
- Likou tsena li amohela IR Emitter (CC-NIRC) e holang fensetereng ea mochine oa IR.
Boema-kepe ba ICSLAN
- Balaoli ba MU-1000/2300/3300 ba na le mefuta e 'meli ea likou tsa Ethernet: LAN le ICSLAN.
- Boema-kepe ba LAN bo sebelisetsoa ho hokahanya molaoli le marang-rang a kantle, 'me likou tsa ICSLAN li sebelisoa ho hokela lisebelisoa tse ling tsa AMX kapa lisebelisoa tsa motho oa boraro tsa A/V. Likou tsa ICSLAN mefuteng eohle li fana ka Khokahano ea Ethernet ho Lisebelisoa tse hoketsoeng tsa AMX Ethernet ka tsela e ka thoko ho khokahanyo ea mantlha ea LAN. Boema-kepe ba ICSLAN ke sehokelo sa 10/100 Port RJ-45 mme Auto MDI/MDI-X e nolofalitsoe. Molaoli o tla mamela boema-kepeng bofe kapa bofe bakeng sa libese tsa puisano tsa Harman tse kang ICSP, HIQnet, le HControl.
Ho sebelisa marang-rang a ICSLAN
- Litlhophiso tsa marang-rang tsa ICSLan
- Aterese ea kamehla ea IP bakeng sa marang-rang a ICSLAN ke 198.18.0.1 e nang le subnet mask ea 255.255.0.0. U ka seta mask a subnet le aterese ea marang-rang bakeng sa ICSLan sebakeng se kentsoeng ke molaoli oa MU web seva.
- Hlokomela: Li-subnet tsa ICSLAN le LAN ha lia tlameha ho nyallana. Haeba boema-kepe ba LAN bo hlophisitsoe ka tsela eo sebaka sa eona sa aterese se kopanang le marang-rang a ICSLAN, marang-rang a ICSLAN a tla THIBA.
- Seva ea DHCP
- Boema-kepe ba ICSLAN bo na le seva ea DHCP e hahelletsoeng ka hare. Seva ena ea DHCP e lumelletsoe ka mokhoa oa kamehla 'me e tla fana ka liaterese tsa IP ho lisebelisoa life kapa life tse hoketsoeng tse behiloeng ho DHCP mode. Seva ea DHCP e ka tingoa ho tsoa ho selaoli sa MU se ahiloeng web seva Sebaka sa liaterese tsa DHCP se abetsoe halofo ea liaterese tsa IP tse fumanehang ho subnet e abetsoeng.
Ho bula LAN le ICSLAN Sockets ho tloha Khoutu - Ha u bula li-sockets ho tsoa ho script leha e le efe ha ho na mokhoa oa ho bontša hore na ho sebelisoa marang-rang afe. Mookameli o tla bula sekoti holim'a marang-rang leha e le afe a nang le subnet ea IP e lumellanang le aterese e fanoeng taelo ea ho bula sokete. Ha ho na pontšo ea hore na marang-rang a sebelisitsoeng, feela hore na sokete e entsoe ka katleho.
- Boema-kepe ba ICSLAN bo na le seva ea DHCP e hahelletsoeng ka hare. Seva ena ea DHCP e lumelletsoe ka mokhoa oa kamehla 'me e tla fana ka liaterese tsa IP ho lisebelisoa life kapa life tse hoketsoeng tse behiloeng ho DHCP mode. Seva ea DHCP e ka tingoa ho tsoa ho selaoli sa MU se ahiloeng web seva Sebaka sa liaterese tsa DHCP se abetsoe halofo ea liaterese tsa IP tse fumanehang ho subnet e abetsoeng.
- Boema-kepe ba LAN 10/100
- Balaoli bohle ba li-MU-Series ba na le boema-kepe ba LAN 10/100 ho fana ka puisano ea 10/100 Mbps ka Category cable. Ena ke boema-kepe bo lumelletsoeng ba Auto MDI/MDI-X, bo u lumellang ho sebelisa likhoele tsa Ethernet tse otlolohileng kapa tsa crossover. Boema-kepe bo tšehetsa marang-rang a IPv4 le IPv6, hammoho le HTTP, HTTPS, Telnet, le FTP.
- Boema-kepe ba LAN ka bohona bo buisana ka lebelo la khokahano (10 Mbps kapa 100 Mbps), le hore na ho sebelisa halofo ea duplex kapa mokhoa o felletseng oa duplex.
Boema-kepe ba LAN bo fumana liaterese tsa bona tsa IP ka tsela e le 'ngoe kapa ho feta tse latelang:
IPv4
- Mosebetsi o tsitsitseng ke mosebedisi
- Mosebetsi o matla ke seva sa IPv4 DHCP
- Link-local e le fallback ha e lokiselitsoe DHCP empa ha e khone ho fumana aterese ka katleho
IPv6
- Link-aterese ea sebaka
- Prefix (li) e fanoeng ke router
INNPUT PWR Connector
Li-controller tsa MU-1300, MU-2300, le MU-3300 li na le sehokelo sa 2-pin 3.5 mm Phoenix se nang le "screw" bakeng sa ho fana ka matla a DC ho molaoli. Phepelo ea motlakase e khothaletsoang bakeng sa balaoli ba li-MU-Series ke 13.5 VDC 6.6 A, e loketseng 50° C.
Ho Lokisetsa Lithapo Tsa Botlamuoa
U tla hloka terata stripper le sephara-blade screwdriver ho lokisetsa le ho hokahanya lithapo tsa botlamuoa.
HLOKOMELA: Le ka mohla u se ke ua sebelisa lithapo tsa pre-tin bakeng sa likhokahano tsa mofuta oa compression.
- Hlakola 0.25 inch (6.35mm) ea ho koala lithapo tsohle.
- Kenya terata e 'ngoe le e 'ngoe sebakeng se loketseng se hokahaneng (ho ea ka litšoantšo tsa lithapo le mefuta ea likhokahanyo tse hlalositsoeng karolong ena).
- Tiisa li-screws ho tiisa terata sehokelong. U se ke ua tiisa li-screws ka mokhoa o feteletseng, kaha ho etsa joalo ho ka 'na ha hlobola likhoele le ho senya sehokelo.
Balaoli bohle ba li-MU-Series ba na le konopo ea ID eo u ka e sebelisang ho tsosolosa litlhophiso tsa kamehla ho molaoli kapa ho khutlisetsa molaoli setšoantšong sa eona sa firmware ea fektheri. Boemo ba LED bo tla bontša ketso e entsoeng ka ho fetola 'mala.
Ts'ebetso ea ID Pushbutton e tjena:
| Nako ea ho Tšoara Konopo ea ID | Boemo ba 'mala oa LED | Ts'ebetso e Etsoang ha e lokolloa |
| E sa tšoaroa | Botala, ho panya ha mongolo o ntse o sebetsa | Ho matha ka tlwaelo |
| 0 - 10 metsotsoana | E tšoeu, e panya ka potlako | E sebetsa ka tloaelo, phatlalatso ea ID e rometsoe |
| 10 - 20 metsotsoana | Amber, ho panya ka potlako | Seta botjha (sheba ka tlase) |
| 20 + metsotsoana | E khubelu, e panya ka potlako | Fektheri Firmware Reset |
Ho seta bocha ho etsa lits'ebetso tse latelang:
- Lingoliloeng tsohle tsa basebelisi (Python, Groovy, JavaScript, le Node-RED) le lilaebrari lia hlakoloa.
- Li-extensions tsohle tse kentsoeng ka letsoho li hlakotsoe
- Lipolokelo tsohle tse hlophisitsoeng ka letsoho lia tlosoa
- Mohlala oa lisebelisoa tsohle files li tlosoa
- Lintho tsohle tsa tlhophiso ea Plug-in li setiloe bocha hore li be maemong a tsona
- Li-server tsohle tsa SMTP li tlositsoe
- ICSP netefatso / encryption khutlela ho "tima"
- Lisebelisoa tsohle tsa NDP tse tlanngoeng ha li koaheloe (TBD)
- Tsohle IRL files li tlosoa
- Tsohle li kentsoe HiQnet AudioArchitect files li tlosoa
- ID ea node ea HiQnet e khutlela ho ea kamehla
- All Duet module .jar files li tlosoa
- Litlhophiso tsa marang-rang li khutlisetsoa ho li-default
- LAN e khutlela ho DHCP client mode, hostname e khutlisetsa boleng ba kamehla
- ICSLan e khutlela ho mokhoa oa Seva ea DHCP ka octets 198.18.0.x
- 802.1x e koetsoe
- Nako ea marang-rang e tingoa
- Li-server tsa NTP li hlakotsoe
- Nako e tla tsamaea ho sebelisoa oache ea nako ea nnete
- Nako ea sebaka e khutlela ho ea kamehla
- Liakhaonto tsa basebelisi lia hlakoloa
- Lintlha tsa kamehla tsa "admin" tse nang le "password" ea kamehla lia khutlisoa
- Mosebelisi oa "tšehetso" o holofetse
- Seva efe kapa efe e hlophisitsoeng ea Syslog e koetsoe ebile e hlakotsoe
- Ho rengoa ha li-flash media ho koetsoe
- Setifikeiti leha e le sefe se kentsoeng ka letsoho sea tlosoa
- Litifikeiti tsa feme bakeng sa HControl, HTTPS, le Sireletsehile ICSP lia khutlisoa
- Likou tsa taolo ea lisebelisoa li khutlela maemong a kamehla
- IRL files li hlakotsoe
- Li-parameter tsa serial port comm li khutlela ho maemo a tsona a kamehla (9600, 8 data bits, 1 stop bit, No parity, 422/485 e holofalitsoeng)
- Li-I/O kaofela li khutlela mokhoeng oa ho kenya ka dijithale ka litekanyo tsa kamehla
Ho hlophisoa ha Firmware ea Fektheri ho kenyelletsa Reset ea Tlhophiso hape e kenya firmware ea mantlha e teng nakong ea tlhahiso.
Mekhoa ea LED
Letoto la MU le na le boemo bo le bong bo hlakileng ba mebala e meraro ea LED.
| Mmala | Sekhahla | Boemo |
| Bosehla | Tiileng | Ho qala |
| Botala | Tiileng | E qaqisitsoe |
| Botala | Butle | Lenaneo le sebetsa |
| Boputsoa | Ka potlako | Ntlafatso ea firmware |
| Bosoeu | Ka potlako | Konopo ea ID e Tšoaroe (E lokollotsoe bakeng sa Fumana phatlalatso ea Molaetsa) |
| Bosehla | Ka potlako | Konopo ea ID e Tšoaroe (E lokollotsoe bakeng sa ho seta bocha) |
| Khubedu | Ka potlako | Konopo ea ID e Tšoaroe (E lokollotsoe bakeng sa ho seta fektheri bocha) |
| Magenta | E tiileng/ E butle | Phoso ea ho hokela likoung tse ahiloeng |
© 2024 Harman. Litokelo tsohle li sirelelitsoe. SmartScale, NetLinx, Enova, AMX, AV FOR AN IT WORLD, le HARMAN, 'me li-logo tsa bona ke matšoao a ngolisitsoeng a HARMAN. Oracle, Java le khamphani efe kapa efe kapa lebitso la lebitso leo ho buuoang ka lona e ka ba matšoao a khoebo/matšoao a ngolisitsoeng a lik'hamphani tsa bona. AMX ha e nke boikarabello bakeng sa liphoso kapa litlolo. AMX e boetse e na le tokelo ea ho fetola litlhaloso ntle le tsebiso pele ka nako efe kapa efe. Leano la Warranty le Return la AMX le litokomane tse amanang le tsona li ka viewed/downloaded at www.amx.com.
3000 PATLISISO DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fekse 469.624.7153.
Litokomane / Lisebelisoa
 |
AMX MU-2300 Automation Controllers [pdf] Buka ea Taelo MU-2300, MU-2300 Automation Controllers, MU-2300, Automation Controllers, Controllers |