Altronix Maximal3F Maximal F Series Batsamaisi ba Matla a ho Fumana Matla a le Mong
Mefuta e kenyeletsa
Boholo3F
- 12VDC @ 4.6A kapa 24VDC @ 5.2A.
- Fuse e leshome le metso e tsheletseng (16) e sireleditse diphetho tse sa lekanyetswang matla.
Boholo5F
- 12VDC @ 8.6A.
- Fuse e leshome le metso e tsheletseng (16) e sireleditse diphetho tse sa lekanyetswang matla.
Boholo7F
- 24VDC @ 9.2A.
- Fuse e leshome le metso e tsheletseng (16) e sireleditse diphetho tse sa lekanyetswang matla.
MaximalF Series Overview
MaximalF Access Power Controllers ba aba le ho fetola matla ho fihlella litsamaiso tsa taolo le lisebelisoa. Ba fetolela tlhahiso ea 120VAC 60Hz ho tse leshome le metso e tšeletseng (16) tse laoloang ka boikemelo tsa 12VDC kapa 24VDC fuse e sirelelitsoeng. Lisebelisoa tsena tsa Fail-Safe/Fail-Sireletsehile li ka fetoloa hore e be mabitso a "C" a omileng. Liphello li kenngoa ts'ebetsong ke sink e bulehileng ea pokello kapa ka tloaelo e bulehileng (NO) ho kenya letsoho le omileng ho tloha ho Access Control System, Keypad, Push Button, REX PIR, joalo-joalo Li-Units li tla tsamaisa matla ho lisebelisoa tse fapaneng tsa ho laola lisebelisoa tse kenyeletsang: Mag Locks. , Ho Otloa ha Motlakase, Magnetic Door Holders, joalo-joalo FaCP Interface e nolofalletsa Emergency Egress, Alarm Monitoring, kapa e ka sebelisoa ho qalisa lisebelisoa tse ling tse thusang. Karolo ea ho khaola alamo ea mollo e ka khethoa ka bonngoe bakeng sa liphetho tse leshome le metso e tšeletseng (16). Lisebelisoa tsohle tse hokahanyang li tlameha ho ngolisoa ka UL.
120VAC 60Hz Motlakase oa Hona Joale oa Boto ea Phatlalatso ea Phatlalatso ea Phatlalatso ea Matla a Phatlalatso ea Matla a Battery Fuse Rating 12VDC Output Range (V) 24VDC Output Range (V) 12VDC Output Range (V) 24VDC Output Range (V) Fuse-Fuse Current Outputs8 Output (A) ACM8 Board Input Fuse Rating ACM8 Board Output Fuse Rating
MaximalF Series Configuration Chart:
| Nomoro ea Mohlala oa Altronix | 120VAC 60Hz Kenya Hona Jwale |
Tekanyetso ea Motlakase oa Boto ea Phepelo ea Matla | Boto ea Phepelo ea Matla Battery Fuse Rating | Nominal DC Output Voltage | Phepelo e phahameng ea hona joale bakeng sa Main le Aux. Liphetho ho boto ea Phepelo ea Matla le liphetho tsa ACM8 Access Power Controllers (A) | Fuse e Sirelelitsoeng e sa Lekanyetsoang ke Matla | Sephetho sa Hajoale Ka ACM8 (A) | Tekanyo ea Kenyelletso ea Boto ea ACM8 | ACM8 Board Output Fuse Rating | |||
| [DC] | [Aux] | |||||||||||
| 12VDC Output Range (V) | 24VDC Output Range (V) | 12VDC Output Range (V) | 24VDC Output Range (V) | |||||||||
| Boholo3F | 3.5A | 5A/
250V |
10A/
32V |
10.0-
13.2 |
20.19-
26.4 |
10.03-
13.2 |
20.19-
26.4 |
12VDC @ 4.6A kapa
24VDC @ 5.2A |
16 | 2.5 | 10A/
250V |
3.5A/
250V |
| Boholo5F | 3.5A | 5A/
250V |
15A/ 32V |
10.03-13.2 | – | 10.03-
13.2 |
– | 8.6A | 16 | 2.5 | 10A/
250V |
3.5A/
250V |
| Boholo7F | 4.5A | 6.3A/
250V |
15A/
32V |
– | 20.17-
26.4 |
– | 20.28-
26.4 |
9.2A | 16 | 2.5 | 10A/
250V |
3.5A/
250V |
Sephetho sa DC bakeng sa lisebelisoa tsena tsa motlakase ha se na matla a fokolang. Haeba tlhahiso e lekanyelitsoeng ea matla e hlokahala ts'ebelisong ea sehlahisoa sa ho qetela, sephetho sa DC se tsoang phepelong ea motlakase se tlameha ho hokeloa ho yuniti ea taolo e Lokisitsoeng ka thoko kapa boto ea lisebelisoa e fanang ka liphetho tse lekanyelitsoeng matla. Sehlahisoa se fanang ka (li)sebelisoa tse fokolang matla se tlameha ho thathamisoa ka mokhoa o loketseng ts'ebeliso e itseng ea sehlahisoa (taolo ea phihlello), 'me se kenngoe ka mehala ho latela litaelo tsa ho kenya lihlahisoa. Mekhoa ea ho kopanya ea Sehlopha sa 1, karohano ea lipotoloho, le libaka tse loketseng tse hakantsoeng ka mollo kaofela li tlameha ho nahanoa ha ho hokela tlhahiso ea DC ea phepelo ea motlakase ho lisebelisoa tsa sehlahisoa sa ho qetela. Litholoana tse thusang tsa likarolo tsena li na le matla a fokolang.
Lethathamo la Setsi:
UL Lists bakeng sa
Lisebelisoa tsa US: UL 294* - UL e thathamisitsoeng bakeng sa Litsi tsa Tsamaiso ea ho Finyella.
*ANSI/UL 294 7th Ed. Maemo a Tshebetso a Taolo ya ho Kena:
Tlhaselo e Senyang - I; Boitshoko – I; Line Security - I; Matla a ho ema - II, III, IV.
UL Lists bakeng sa
Lisebelisoa tsa Canada:
ULC-S319-05 - Lisebelisoa tsa Electronic Access Control Systems Sehlopha sa I. CSA C22.2 No.205 - Lisebelisoa tsa Letšoao.
ULC-S319-05 Electronic Access Control Systems e tla be e sa sebetse ka tšebeliso ea leha e le efe ea ho eketsa, ho atolosa, mohopolo kapa mochine o mong o entsoeng ke moetsi kapa bahlahisi ba bang.
MaximalF Series Features:
ACM8 Access Controller Modules:
- Ba leshome le metso e ts'eletseng (16) ba ikemela ba hlahisa liphetho tse laoloang. Likhetho tsa tlhahiso:
a) Tse leshome le metso e ts'eletseng (16) tse feliloeng tsa matla a feliloeng.
b) Tse leshome le metso e ts'eletseng (16) tse hlahisang matla a feliloeng-Sefe.
c) Leshome le metso e ts'eletseng (16) liphetho tsa "C" tsa relay (rated @ 5A/28VDC kapa VAC).
d) Motsoako ofe kapa ofe oa tse ka holimo. - Leshome le metso e ts'eletseng (16) Sistimi ea Taolo ea Phihlello e kenya tse kenang. Likhetho tsa ho kenya letsoho:
a) Tse leshome le metso e ts'eletseng (16) tse atisang ho buloa (NO) li-trigger tse omileng.
b) Tse leshome le metso e ts'eletseng (16) tse kenyang likoleke tse bulehileng. c) Motsoako ofe kapa ofe oa tse ka holimo. - Leshome le metso e ts'eletseng (16) le sa fetoheng le sefiloeng. lihlahisoa tsa matla (lihlahisoa li lekantsoe @ 2.5A).
- Li-LED tse khubelu ho boto ea ACM8 li bonts'a hore lihlahisoa tsa motho ka mong li hlahisoa (li-relay li matlafalitsoe).
- Ho khaoha ha Alarm ea Mollo (ho latching kapa ho se lache) ho ka khethoa ka bonngoe bakeng sa liphetho tse robeli (8).
Likhetho tsa ho kenya Alarm ea Mollo:
a) Ka tloaelo bula (NO) kapa ka tloaelo koaloa (NC) dry trigger input.
b) Kenyelletso ea ho khutlisetsa polarity ho tsoa ho potoloho ea matšoao a FACP. - LED e tala botong ea ACM8 e bonts'a hore khokahano ea FACP e qalile.
- Phatlalatso ea FACP e bonts'a hore tlhahiso ea FACP e qalile (foromo "C" lebitso le rated @ 1A/28VDC ha e hlahlojoe ke UL).
- eFlow Power Supply/Charger e fana ka matla a tloaelehileng bakeng sa boto ea ACM8 (wiring ea fektheri) le lisebelisoa tsohle tse hokahaneng tsa taolo ea phihlello ( wiring ea tšimo).
- Li-fuse tse kholo tsa boto ea ACM8 li fuoe lintlha tsa @ 10A. Li-fuse tse hlahisoang li reitiloe @ 3.5A.
EFlow Power Supply/Charger:
- Kenyelletso: 120VAC, 60Hz. · Bakeng sa tlhahiso voltage le phepelo ea hajoale e lebisa ho MaximalF series Configuration Chart, pg. 3.
- Sephetho sa Auxiliary Power-Limited rated @ 1A (ha sea fetoha).
- Ho tlolatagtshireletso.
- Tjhaja e hahelletsoeng kahare bakeng sa asiti e tiisitsoeng ea lead kapa libeteri tsa mofuta oa gel
- Boholo ba tefiso ea hajoale ke 1.54A.
- Fetolela ka ho iketsa betri e emeng ha AC e hloleha. Matla a ho fetisetsoa ho betri e emeng e etsahala hang hang ha ho na tšitiso.
- Ho khaoha ha Alamo ea Mollo e hlokometsoeng (ho latching kapa ho se latching) 10K EOL resistor. E sebetsa ho trigger e tloahelehileng e bulehileng (NO) kapa ka tloaelo e koetsoeng (NC).
- AC e hloleha ho laola (ho theha mabitso a "C").
- Betri ha e sebetse le ho hlokomela boteng (foromo "C" mabitso).
- Ho tima matla a tlase. E koala li-terminals tsa DC haeba betri e le matlatage theoha ka tlase ho 71-73% bakeng sa li-unit tsa 12V le 70-75% bakeng sa li-unit tsa 24V (ho itšetlehile ka matla a matla). E thibela ho tsoa ha betri e tebileng.
- Bakeng sa litekanyetso tsa fuse sheba ho MaximalF series Configuration Chart, pg. 3.
- Green AC Power LED e bonts'a 120VAC e teng.
- Lipontšo tsa LED tsa AC le tse hlahisoang ke DC.
- Tšireletso e khutšoanyane ea potoloho le tšireletso e feteletseng.
- Sebaka se ka har'a libethe tse fihlang ho tse 'ne (4) 12VDC/12AH. Bophahamo ba sebaka (H x W x D): 26″ x 19″ x 6.25″ (660.4mm x 482.6mm x 158.8mm).
Litaelo tse kholo tsa ho Kena:
Mekhoa ea lithapo e tla ba ho latela Khoutu ea Naha ea Motlakase/NFPA 70/ANSI, Khoutu ea Motlakase ea Canada, Karolo ea I, Karolo ea II le likhoutu tsohle tsa lehae le ba boholong ba nang le matla a ho laola. Sehlahisoa se reretsoe ho sebelisoa ka tlung feela.
- Beha yuniti sebakeng seo u se batlang. Tšoaea 'me u phunye masoba leboteng ho tsamaisana le likoti tse tharo tse ka holimo ka har'a sebaka se koalehileng. Kenya li-fasteners le li-screws tse tharo leboteng 'me lihlooho tsa screw li hlahelle. Beha masoba a ka holimo a kokelo holim'a likurufu tse tharo tse ka holimo, u be boemong 'me u sireletsehe. Tšoaea boemo ba likoti tse tharo tse tlase. Tlosa sebaka se kampetsoeng. Hlakola likoti tse ka tlase ebe u kenya li-fasteners tse tharo. Beha masoba a ka holimo a kokelo holim'a likurufu tse tharo tse ka holimo. Kenya li-screw tse tharo tse tlase 'me u tiise hore u tiisa li-screw tsohle (Enclosure Dimensions, pg. 15).
- Hokela matla a AC a sa fetoheng (120VAC 60Hz) ho li-terminals tse tšoailoeng [L, N] (Setšoantšo sa 3, leqephe la 10). Green "AC" LED botong ea phepelo ea motlakase e tla bulela. Leseli lena le ka bonoa ka lense ea LED e monyako oa sebaka se kampetsoeng. Sebelisa 14 AWG kapa e kholoanyane bakeng sa likhokahano tsohle tsa matla. Sireletsehile terata e tala lebisa lefatšeng fatše. Boloka lithapo tse lekanyelitsoeng matla li arohane le lithapo tse se nang matla. Ho tlameha ho fanoe ka sebaka se fokolang sa 0.25″ (Setšoantšo sa 3, leqephe la 10).
TLHOKOMELISO: U se ke ua tšoara likarolo tsa tšepe tse pepenene. Koala matla a potoloho ea lekala pele u kenya kapa u sebeletsa lisebelisoa. Ha ho na likarolo tse ka sebelisoang ke basebelisi ka hare. Fetisetsa ho kenya le ho fana ka litšebeletso ho basebeletsi ba nang le tsebo. - Khetha e lakatsehang DC output voltage ka ho beha SW1 sebakeng se loketseng ho matla a Maximal3F (setšoantšo sa 1a, pg. 9).
Phepelo ea matla a Maximal5F ke feme e behiloeng ho 12VDC mme phepelo ea motlakase ea Maximal7F ke feme e behiloeng ho 24VDC. - Lekanya tlhahiso ea matlatage ea yuniti pele o hokela lisebelisoa life kapa life ho netefatsa ts'ebetso e nepahetseng. Phallo e sa lokang kapa e phahamengtage tla senya lisebelisoa tsena.
- Dikgetho tsa tlhahiso (Setšoantšo sa 2, leqepheng la 9):
Yuniti e tla fana ka liphetho tsa motlakase tse fetotsoeng tse leshome le metso e tšeletseng (16), tse leshome le metso e ts'eletseng (16) tse ommeng tsa "C", kapa motsoako ofe kapa ofe oa matla a fetotsoeng le liphetho tsa "C".
(a) Liphetho tsa Fail-Safe Switched Power:
Bakeng sa ts'ebetso ea Fail-Safe, hokela ho kenya letsoho (+) ho lisebelisoa tsa taolo ea phihlello ho theminale e tšoailoeng [NC]. Hokela molaetsa o fosahetseng () oa lisebelisoa tsa taolo ea phihlello ho theminale e tšoailoeng [COM].
(b) Liphetho tsa Fail-Secure Switched Power:
Bakeng sa ts'ebetso ea Fail-Sireletsehile, hokela tlhahiso e ntle (+) ea lisebelisoa tsa taolo ea phihlello ho terminal e tšoailoeng [NO]. Hokela molaetsa o fosahetseng () oa lisebelisoa tsa taolo ea phihlello ho theminale e tšoailoeng [COM].
(c) Liphetho tsa Foromo ea "C":
Ha liphetho tsa "C" li lakatseha, li-fuse tse tsamaellanang (1-8) tsa boto ka 'ngoe ea ACM8 li tlameha ho tlosoa. - Liphetho tsa Matla a ACM8 (tse sa fetoloang):
Hokela lisebelisoa tsa taolo ea phihlello tse hlokang matla a sa khaotseng ho litheminale tse tšoailoeng [C] positive (+) le [COM] negative (). Liphetho li ka sebelisoa ho fana ka matla bakeng sa babali ba likarete, li-keypad joalo-joalo.
Liphetho tsa eFlow (tse sa fetoloang):
Bakeng sa khokahanyo ea lisebelisoa tse thusang tlhahiso ena e ke ke ea angoa ke Thibelo ea Matla a Tlase kapa Sehokelo sa Alarm ea Mollo. Hokela sesebelisoa ho li-terminals tse tšoailoeng [+ AUX] (Setšoantšo sa 3, leqephe la 10). - Likhetho tsa ho kenya letsoho (setšoantšo sa 2, leqephe la 9):
(a) Hangata Bula [NO] trigger ea ho kenya:
Litlhahiso tsa 1-8 li kentsoe tšebetsong ka mokhoa o tloaelehileng oa ho kenya sekontiri se bulehileng kapa se bulehileng. Hokela liphetho tsa phanele ea phihlello, li-keypad, likonopo tse tobetsang, li-PIR tsa REX, joalo-joalo ho li-terminals tse tšoailoeng [IN] le [GND].
(b) Open Collector Sink inputs:
Hokela setsi sa taolo ea phihlello se bulehileng se bokellang se nepahetseng (+) ho litheminale tse tšoailoeng [IN] le negative () ho litheminale tse tšoailoeng [GND]. - ACM8 Fire Alarm Interface dikgetho (Setšoantšo sa 5-9, leqepheng la 12):
[NC] kapa ka tloaelo ho buloa [NO] ho kenya letsoho ho tsoa phanele ea taolo ea alamo ea mollo kapa keno e khutlisetsang polarity ho tsoa ho potoloho ea matšoao a FACP e tla ama liphetho tse khethiloeng. Ho nolofalletsa FACP Disconnect bakeng sa tlhahiso, tima switch(e) e tsamaellanang le eona [SW1-SW8] HO TOMA botong e 'ngoe le e 'ngoe ea ACM8. Ho tima FACP hakoa bakeng sa tlhahiso, bulela switch(es) e tsamaellanang [SW1-SW8] ON botong ka 'ngoe ea ACM8.
(a) Ka tloaelo Bula [NO] ho kenya:
Bakeng sa ho se latching hook-up bua ka (setšoantšo sa 6, leqephe la 12). Bakeng sa latching hook-up sheba Setšoantšo sa 7, leq. 12.
(b) Hangata ho koetsoe [NC]:
Bakeng sa ho se latching hook-up bua ka (setšoantšo sa 8, leqephe la 12). Bakeng sa latching hook-up sheba Setšoantšo sa 9, leq. 12.
(c) Sehlomathisi se kenyang Potoloho ea Letšoao la FACP:
Hokela positive (+) le negative () ho tloha ho FACP signaling circuit output ho litheminale tse tšoailoeng [+ INP ]. Hokela FACP EOL ho litheminale tse tšoailoeng [+ RET -] (polarity e bonts'itsoe maemong a alamo). Jumper e haufi le TRG LED e tlameha ho khaoloa (setšoantšo sa 5, leqephe la 12). - FACP Dry Foromo "C" tlhahiso (Setšoantšo sa 2a, leqephe la 12) (Ha e hlahlojoe ke UL):
Mabitso a mofuta oa "C" a FACP a ka sebelisoa ho qala lisebelisoa tsa ho tlaleha kapa ho fana ka matšoao. Li-contact tsena li kenya alamo ea mollo ho liboto tsa ACM8. - Lihokelo tsa Battery tse emeng (Setšoantšo sa 3, leqepheng la 9):
Bakeng sa lits'ebetso tsa US Access Control li-betri lia ikhethela. Libetri lia hlokahala bakeng sa ho kenya lisebelisoa tsa Canada (ULC-S319). Ha libetri li sa sebelisoe, tahlehelo ea AC e tla fella ka tahlehelo ea matla a tlhahisotage. Ha tšebeliso ea libeteri tse emeng li lakatseha, e tlameha ho ba acid ea lead kapa mofuta oa gel. Hokela betri ho li-terminals tse tšoailoeng [BAT +] (Setšoantšo sa 3, leqephe la 10). Sebelisa libeteri tse peli (2) tsa 12VDC tse hokahaneng letotong bakeng sa ts'ebetso ea 24VDC (li-lead tsa betri li kenyelelitsoe). Sebelisa libeteri – Casil CL1270 (12V/7AH), CL12120 (12V/12AH), CL12400 (12V/40AH), CL12650 (12V/65AH) libeteri kapa libeteri tse amoheloang ke UL BAZR2 le BAZR8 tsa lintlha tse nepahetseng. - Liphetho tsa Battery le AC Supervision (Setšoantšo sa 3, leqepheng la 10):
Hoa hlokahala ho hokela lisebelisoa tsa tlaleho ea mathata a bolaoli ho liphetho tse tšoailoeng [AC Fail, BAT Fail] tse tšoailoeng [NC, C, NO] ho lisebelisoa tse loketseng tsa tsebiso. Sebelisa 22 AWG ho isa ho 18 AWG bakeng sa tlaleho ea AC Fail & Low/No Bettery. - Ho liehisa tlaleho ea AC bakeng sa lihora tsa 2., Seta switjha ea DIP [AC Delay] ho ea ho OFF (setšoantšo sa 3, leqephe la 10). Ho liehisa tlaleho ea AC bakeng sa 1 min., seta switjha ea DIP [AC Delay] ho boemo ba ON (setšoantšo sa 3, leqephe la 10).\
- Khaola Alamo ea Mollo (Setšoantšo sa 3, leqepheng la 10):
Ho bulela Alamo ea Mollo Hakolla, seta switjha ea DIP [Shutdown] ho ea ho ON. Ho tima Alamo ea Mollo Hakolla seta switjha ea DIP [Shutdown] ho ea ho OFF - Ho kenngoa ha TampFetola (Setšoantšo sa 3b, leqepheng la 10):
Thaba ea UL Listed tamper switch (Altronix ea mohlala TS112 kapa e lekanang le eona) ka holimo ho sebaka se kampetsoeng. Tsamaisa tamper switjha bracket moeling oa sebaka se kampetsoeng hoo e ka bang 2″ ho tloha ka lehlakoreng le letona (setšoantšo sa 3b, leqephe la 10). Kopanya tamper switch wiring ho ea ho Access Control Panel kapa sesebelisoa se nepahetseng sa tlaleho se Lethathameng la UL. Ho kenya letshwao la alamo tshebetsong, bula lemati la sebaka se kampeleng.
Tlhokomelo:
Yuniti e lokela ho lekoa bonyane hang ka selemo bakeng sa ts'ebetso e nepahetseng ka tsela e latelang:
| Tlhokomelo ea FACP: | Ho etsa bonnete ba hore ho na le khokahano e nepahetseng le ts'ebetso ea "Fire Alarm disconnect hookup", ka kopo latela mokhoa o nepahetseng o latelang: |
| Ka tloaelo Bula Kenyo: | Ho beha sebaka se sekhutšoane lipakeng tsa litheminale tse tšoailoeng [T] le [+ INP] ho tla etsa hore ho Khaolloe Alamo ea Mollo. Tlosa e khutšoanyane ho tsosolosa. |
| Kenyelletso e Tloaelehileng: | Ho tlosa terata ho theminale e tšoailoeng [INP –] ho tla bulela Mollo oa Alarm Disconnect. Fetolela terata ho theminale e tšoailoeng [INP –] ho seta botjha. |
| Kenyo ya Potoloho ya Letshwao la FACP: | t hoa hlokahala ho qala Sesebelisoa sa Alamo ea Mollo. Liketsahalong tsohle tse ka holimo TRG LED e tala ea ACM8s e tla khantša. Liphetho tsohle tse khethiloeng bakeng sa Fire Alarm Disconnect li tla kenya tšebetsong lisebelisoa tse notlelang |
Hlokomela: Liphetho tsohle [OUT 1] – [OUT 8] li tlameha ho ba maemong a tloaelehileng (ho felloa ke matla) pele ho tlhahlobo. Ha yuniti e hlophisitsoe bakeng sa Tloaelo e Bulehileng (setšoantšo sa 7, leqephe la 12) kapa Ho Koetsoe ka Tloaelehileng (setšoantšo sa 9, leq. 12) ho hlokahala hore u sete seta Alarm ea Mollo ka ho kenya ts'ebetso ea Tloaelo e Tloaelehileng reset reset.
| Khumo Voltage Teko: | Tlas'a maemo a tloaelehileng a mojaro, molumo oa DC oa voltage lokela ho hlahlojwa bakeng sa vol e nepahetsengtage level (sheba MaximalF series Configuration Chart, pg. 3). |
| Teko ea Betri: | Tlas'a maemo a tloaelehileng a mojaro, hlahloba hore na betri e tjhajiloe ka botlalo, hlahloba molumo o boletsoengtage liteisheneng tsa betri le liteisheneng tsa boto tse tšoailoeng [+ BAT –] ho netefatsa hore ha ho na ho khaoha lithapong tsa ho hokela betri. |
Hlokomela: Boholo ba tefiso ea hajoale ke 1.54A. Bophelo ba betri bo lebelletsoeng ke lilemo tse 5; leha ho le joalo, ho kgothaletswa ho fetola dibetri nakong ya dilemo tse 4 kapa ka tlase ha ho hlokahala.
Tlhahlobo ea LED ea Boto ea Phepelo ea Matla:
| Khubelu (DC) | Botala (AC/AC1) | Boemo ba Phepelo ea Matla |
| ON | ON | Boemo bo tloaelehileng ba ts'ebetso. |
| ON | TLOA | Tahlehelo ea AC. Betri e emeng haufi e fana ka matla. |
| TLOA | ON | Ha ho tlhahiso ea DC. |
| TLOA | TLOA | Tahlehelo ea AC. Betri e emeng kapa e sa sebetseng. Ha ho tlhahiso ea DC. |
| Khubelu (Bat) | Boemo ba Battery |
| ON | Boemo bo tloaelehileng ba ts'ebetso. |
| TLOA | Betri e hlolehile/betri e tlase. |
Fumana Tlhahlobo ea LED ea Taolo ea Matla:
| LED | ON | TLOA |
| LED 1- LED 8 (Khubelu) | Li-relay tse hlahisoang li matlafalitsoe. | Li-relay li feletsoe ke matla. |
| Trg (Tala) | Ho kenya FACP (boemo ba alamo). | FACP e tloaelehileng (boemo boo e seng alamo). |
Litlhaloso tsa Battery tsa Boto ea Phepelo ea Matla:
| Betri | Boholo3F | Boholo5F | Boholo7F |
| 7AH | 10 mets./6A | 5 mets./10A | 5 mets./10A |
| 12AH | 30 mets./6A* | 30 mets./10A* | 30 mets./10A* |
| 40AH | Ho feta lihora tse 4/6A* | Ho feta lihora tse 2/10A* | Ho feta lihora tse 2/10A* |
| 65AH | Ho feta lihora tse 4/6A* | Ho feta lihora tse 4/10A* | Ho feta lihora tse 4/10A* |
Boitsebiso ba Boto ea Phepelo ea Matla:
| Terminal Taba | Mosebetsi/Tlhaloso |
| L, G, N | Hokela 120VAC 60Hz ho li-terminals tsena: L ho ea ho chesa, N ho se nke lehlakore. Se ke oa sebelisa theminale e tšoailoeng [G]. |
| + DC - | Feme e hokahaneng le boto ea ACM8. |
| Hlahisa EOL e Laolehileng | Sebopeho sa Alarm ea Mollo se kenya letsoho ho tsoa ho nako e khuts'oane kapa FACP. Lisebelisoa tsa trigger li ka buloa ka tloaelo, hangata li koaloa ho tsoa ho seketsoana sa phallo ea FACP (ho kenya matla a fokolang a Sehlopha sa 2)(Setšoantšo sa 3, leqephe la 10). |
| CHE, GND RESET | Khokahano ea FACP e latching kapa e sa thekeseleng (Sehlopha sa 2 se na le matla a fokolang) (Setšoantšo sa 3, leqephe la 10). |
| + AUX - | Thuso ea Sehlopha sa 2 se hlahisoang ke matla a lekanyelitsoeng ke @ 1A (ha sea fetoha) (Setšoantšo sa 3, leqephe la 10). |
| AC FAIL NC, C, NO | E supa tahlehelo ea matla a AC, mohlala, hokela sesebelisoa se utloahalang kapa phanele ea alamo. Relay hangata e matlafatsoa ha matla a AC a le teng. Lintlha tsa ho ikopanya le 1A @ 30VDC (Sehlopha sa 2 se na le matla a fokolang) (Setšoantšo sa 3, leqephe la 10). |
| BAT FAIL NC, C, NO | E supa boemo ba betri e tlase, mohlala, hokela ho phanele ea alamo. Relay hangata e matlafatsoa ha matla a DC a le teng. Boemo ba ho ikopanya le 1A @ 30VDC. Betri e tlositsoeng e tlalehoa nakong ea metsotso e 5. Khokahano ea betri e tlaleheloa nakong ea motsotso o le mong (Motlakase oa Sehlopha sa 1 o na le matla a fokolang) (Setšoantšo sa 3, leqephe la 10). |
| + BAT - | Lihokelo tsa betri tse emeng. Tefo e phahameng ea hajoale ke 1.54A (ha e na moeli) (Setšoantšo sa 3, leqephe la 10). |
Fumana Boitsebiso ba Terminal Controller Power:
| Terminal Taba | Mosebetsi/Tlhaloso |
| – Matla + | 12VDC kapa 24VDC ho tloha phepelong ea motlakase / tjhaja (fektheri e hokahaneng). Li-terminals tsena li bapisoa le li-terminals tsa [- Control +]. |
|
– Taolo + |
Li-terminals tsena li bapisoa le li-terminals tsa [- Power +]. Li-terminals tsena li ka hokeloa ho phepelo ea motlakase e fumanehang kantle e Lekanyelitsoeng ho fana ka matla a ts'ebetso a ikhethileng bakeng sa lisebelisoa (Ha e hlahlojoe ke UL). Li-Jumpers J1 le J2 li tlameha ho tlosoa. |
| TRIGGER INPUT1 – INNPUT 8 IN, GND | Ho tsoa ho lisebelisoa tse tloaelehileng tse bulehileng le / kapa tse bulehileng tsa "mokelli" (kopo ea ho tsoa likonopo, ho tsoa li-PIR, joalo-joalo) |
| TLHALOSO 1- OUTPUT 8 NC, C, NO, COM | Liphetho tse laoloang ke 12VDC ho isa ho 24VDC li lekantsoe ho 2.5A. Maximal3F: 10.0-13.2VDC @ 4.6A kapa 20.19-26.4VDC @ 5.2A. Maximal5F: 10.03-13.2VDC @ 8.6A. Maximal7F: 20.17-26.4VDC @ 9.2A. Fail-Safe [NC positive (+) & COM Negative (–)], Fail-Sireletsehile [HA HO positive (+) & COM Negative (–)], Auxiliary output [C positive (+) & COM Negative (–)]. Ha o sebelisa lisebelisoa tsa motlakase tsa AC polarity ha ea lokela ho bonoa. NC, C, NO e fetolelang ho foromo e omileng "C" 5A 24VAC/VDC e fane ka lintlha tse omileng ha li-fuse li tlosoa. Mabitso a bonts'itsoeng a sa qalelle. |
| FACP INTERFACE T, + INNPUT – | Sehokelo sa Alarm ea Mollo se kenya letsoho ho tsoa ho FACP. Lisebelisoa tsa trigger hangata li ka buloa, hangata li koaloa ho tsoa ho phallo ea potoloho ea matšoao a FACP (Setšoantšo sa 5-9, leqepheng la 12). |
| FACP INTERFACE NC, C, NO | Foromo "C" relay contact rated @ 1A 28VDC bakeng sa tlaleho ea alamo (ha e hlahlojoe ke UL). |
Sephetho sa Boto ea Phepelo ea Matla Voltage Litlhophiso:
Setšoantšo se Tloaelehileng sa Selaoli sa Motlakase (bakeng sa ACM8 ka 'ngoe):
TLHOKOMELISO: Ha boto ea phepelo ea motlakase e setetsoe bakeng sa 12VDC sebelisa betri e le 'ngoe feela (1) 12VDC e emeng.
Boloka lithapo tse lekanyelitsoeng matla li arohane le tse se nang matla. Sebelisa sebaka sa bonyane 0.25 ″.
12AH Libetri tse ka chachang hape ke libeteri tse kholo ka ho fetisisa tse ka kenang ka har'a sebaka sena se kampetsoeng. Sebaka sa betri sa kantle se thathamisitsoeng ka UL se tlameha ho sebelisoa ha u sebelisa libeteri tsa 40AH kapa 65AH.
Litlhokahalo tsa Wiring tse lekantsoeng ke NEC:
Lithapo tsa motlakase tse se nang matla le tse se nang matla li tlameha ho lula li arohane ka khabinete. Lithapo tsohle tsa potoloho tse nang le matla a fokolang li tlameha ho lula bonyane 0.25 ″ hole le lithapo life kapa life tsa potoloho tse se nang matla. Ho feta moo, lithapo tsohle tse nang le matla a fokolang a matla le lithapo tse se nang motlakase li tlameha ho kena le ho tsoa ka har'a khabinete ka likhoele tse fapaneng. E 'ngoe ea mohlala o joaloampsena se bontšoa ka tlase. Sesebelisoa sa hau se ikhethileng se ka hloka hore ho sebelisoe li-conduit knockouts tse fapaneng. Ho ka sebelisoa likotopo life kapa life tsa conduit. Bakeng sa lits'ebetso tse lekanyelitsoeng ho sebelisa motlakase ke boikhethelo. Likhokelo tsohle tsa methapo li tlameha ho etsoa ho sebelisa gauge e loketseng ea CM kapa FPL jacket terata (kapa e tšoanang le sebaka sa eona). Sebaka sa boikhethelo sa UL se ka har'a betri se tlameha ho kenngoa haufi le phepelo ea motlakase ka mekhoa ea mehala ea Sehlopha sa 1. Bakeng sa lisebelisoa tsa Canada sebelisa wiring e sirelelitsoeng bakeng sa likhokahano tsohle.
Tlhokomeliso: Sheba setšoantšo sa ho tšoara mohala ka tlase bakeng sa mokhoa o nepahetseng oa ho kenya terata e koetsoeng ea CM kapa FPL (Setšoantšo sa 4a).
FACP Hook-Up Diagrams:
Setšoantšo sa 5 Polarity reversal input ho tloha FACP signaling circuit output (polarity e hlalosoa ka boemo ba alamo):
Litekanyo
Kakaretso Dimensions (H x W x D hoo e ka bang):
26″ x 19″ x 6.25″ (660.4mm x 482.6mm x 158.8mm)
EFlow Power Supply/Charger e ka laoloa le ho shejoa ha u ntse u tlaleha
Matla / Tlhahlobo ho tsoa kae kapa kae holim'a Marang-rang…
LINQ2 - Network Communication Module
LINQ2 e fana ka phihlello e hole ea IP ho data ea nako ea nnete ho tsoa ho phepelo ea motlakase ea eFlow / tjhaja ho thusa ho boloka litsamaiso li sebetsa ka maemo a nepahetseng. E thusa ho kenya le ho hlophisoa ka potlako le ka mokhoa o bonolo, ho fokotsa nako ea ho fokotsa tsamaiso, le ho felisa lits'ebeletso tse sa hlokahaleng, tse thusang ho fokotsa litšenyehelo tsohle tsa ho ba le thepa (TCO) - hammoho le ho theha mohloli o mocha oa Recurring Monthly Revenue (RMR).
Likaroloana
- UL e thathamisitsoe US le Canada.
- Taolo ea lehae kapa e hole ea ho fihla ho (2) tse peli tsa Altronix eFlow power output ka LAN le/kapa WAN.
- Lekola tlhahlobo ea nako ea 'nete: DC output voltage, tlhahiso ea hona joale, AC & boemo ba betri / tšebeletso, phetoho ea boemo ba ho kenya, phetoho ea boemo ba tlhahiso le mocheso oa yuniti.
- Taolo ea phihlello le taolo ea basebelisi: Thibela ho bala / ho ngola, Beha basebelisi mehloling e itseng
- Tse peli (2) tsa marang-rang tse kenyelletsoeng tse laoloang Foromo ea "C" Relays.
- Litharollo tse tharo (3) tsa ho kenya lenaneong: Laola li-relay le lisebelisoa tsa motlakase ka mehloli ea kantle ea hardware.
- Litsebiso tsa lengolo-tsoibila le Windows Dashboard
- Lenaneo la liketsahalo le latela nalane.
- Secure Socket Layer (SSL).
- E ka rarolloa ka USB kapa web sebatli
- e kenyelletsa software e sebetsang le thapo ea USB ea 6 ft.
LINQ2 E beha ka hare ho Sebaka sefe kapa sefe sa MaximalF
Litokomane / Lisebelisoa
 |
Altronix Maximal3F Maximal F Series Batsamaisi ba Matla a ho Fumana Matla a le Mong [pdf] Tlhophiso Tataiso Maximal3F, Maximal5F, Maximal7F, Maximal3F Maximal F Series Single Power Supply Access Controllers, Maximal3F, Maximal F Series Single Power Supply Access Controllers, Access Power Controllers, Power Controllers, Controllers |
