algodue ELETTRONICA RS485 Modbus Puisano Module Bukana ya mosebedisi
MOEKETSI MOSEBETSI
E ka fetoha ntle le tsebiso pele
SETŠOANTŠO/ABBILDEN
TEMOSO! Ho kenya lisebelisoa le ho sebelisoa ho tlameha ho etsoa feela ke basebetsi ba nang le litsebo tse tšoanelehang. Tlosa molumotage pele ho kenya sesebelisoa.
KHOPO TELELE
Bakeng sa khokahanyo ea "terminal" ea module, bolelele ba cable bo lokela ho ba 5 mm. Sebelisa screwdriver ea lehare e nang le boholo ba 0.8 × 3.5 mm, torque e tiisang
- Sheba setšoantšo sa B.
FEELAVIEW
Sheba setšoantšo sa C:
- Li-terminals li tla tloloa bakeng sa ho thibela ho felisoa (RT).
- Li-terminals tsa khokahano ea RS485
- Boema-kepe ba Optical COM
- Beha konopo ea DEFAULT
- Phepelo ea motlakase LED
- Puisano LED
- Li-terminals tsa phepelo ea motlakase
MAKHOPO
Hoa hlokahala converter ea serial lipakeng tsa PC le netweke ea RS485 ho ikamahanya le RS232/USB port ho netweke. Haeba ho na le li-module tse fetang 32 tse lokelang ho hokeloa, kenya mochine o pheta-phetoang. Motho e mong le e mong ea pheta-pheta a ka khona ho tsamaisa li-module tse 32. Bakeng sa ho hokahanya har'a li-module tse fapaneng, sebelisa mohala o nang le para e sothehileng le terata ea boraro. Mofuta oa khokahanyo o bontšitsoeng setšoantšong sa D o sebelisa mokhanni oa boraro ho etsa bonnete ba hore lisebelisoa tsohle tsa marang-rang li na le boemo bo tšoanang ba litšupiso le ho ntlafatsa botšepehi ba puisano. Ha ho na le litšitiso tse matla tsa motlakase, tse ka amang puisano, thapo e sirelelitsoeng e lokela ho sebelisoa. Module e kopantsoe le mohanyetsi oa ho emisa (RT) e ka sebelisoang ka ho tlola li-terminals tse amehang (1-2). Khanyetso ea ho emisa e tlameha ho kenngoa ho PC mme e nolofatsoe ho mojule oa ho qetela o hokahantsoeng moleng. Ka lebaka la likhanyetso tsena, pontšo e bonts'itsoeng haufi le mohala e fokotsehile. Sebaka se phahameng se khothalelitsoeng bakeng sa khokahano ke 1200 m ho 9600 bps. Bakeng sa sebaka se selelele, litekanyetso tse tlase tsa baud kapa likhoele tse fokotsang nako e tlase kapa tse pheta-phetoang lipontšo lia hlokahala. Kamora ho etsa likhokahano tsa RS485, kopanya module e 'ngoe le e' ngoe ea RS485 le mitha e le 'ngoe: li behe ka lehlakore, li hlophisitsoe hantle, ka module optical port e shebaneng le meter optical port. Litekanyetso tsa RS485 li ka fetoloa ka ho toba ho mitha e kopantsoeng kapa ka ho romela litaelo tse nepahetseng tsa protocol tsa MODBUS ho module.
TŠEBELETSO EA LED
Li-LED tse peli li fumaneha phanele e ka pele ea module ho fana ka phepelo ea motlakase le boemo ba puisano:
| LED MALA | POTSO | BOLELA'NG |
| PHEBELO MATLA LED | ||
| – | Matla TIMA | Mojule o TIMA |
|
MONAHANA |
Kamehla ON |
Mojule o BUTSE |
| PUISANO LED | ||
| – | Matla TIMA | Mojule o TIMA |
| G REEN | Ho panya butle
(2 s OFF nako) |
RS485 communication=OK Methara puisano=Ho lokile |
| R ED | Ho panya ka potlako
(1 s OFF nako) |
RS485 puisano=phoso/e sieo Metara puisano=Ho lokile |
| R ED | A lways ON | M eter communication=phoso/sieo |
| TŠEHLA/KHUDUDU | Mebala e fapanyetsanang bakeng sa 5 s | SET SEBELISA mokhoa o ntseng o tsoela pele |
PHETHA MOSEBETSI
SET DEFAULT mosebetsi o lumella ho khutlisetsa ho li-setting tsa kamehla tsa module (mohlala, haeba aterese ea MODBUS e lebetsoe).
Ho khutlisetsa li-setting tsa kamehla, boloka konopo ea SET DEFAULT e tobetse bonyane 5 s, puisano LED e tla benya botala/khubelu bakeng sa 5 s. Qetellong ea ts'ebetso ea SET DEFAULT, LED ea puisano e tla ba khubelu e tsoelang pele e bontšang ho lokolla senotlolo.
Litlhophiso tsa kamehla:
Lebelo la puisano la RS485 = 19200 bps RS485 mode = 8N1 (RTU mode)
Aterese ea Modbus = 01
LIEKETSENG TŠEBELE
Lintlha tse tsamaellanang le maemo a EIA RS485.
Bala haholoanyane ka Bukana ena & Khoasolla PDF:
Litokomane / Lisebelisoa
 |
algodue ELETTRONICA RS485 Modbus Communication Module [pdf] Bukana ea Mosebelisi Ed2212, RS485 Modbus Communication Module, RS485 Modbus, Communication Module, RS485 Modbus Module, Mojule |