M-Bus Communication Module
Bukana ea Mosebelisi
E ka fetoha ntle le tsebiso pele
M-Bus Communication Module
SETŠOANTŠO 
PUISANO MOLEMO
Protocol ea puisano le software e amehang li fumaneha ho www.algodue.com
TEMOSO! Ho kenya lisebelisoa le ho sebelisoa ho tlameha ho etsoa feela ke basebetsi ba nang le litsebo tse tšoanelehang. Tlosa molumotage pele ho kenya sesebelisoa.
KHOPO TELELE
Bakeng sa khokahanyo ea "terminal" ea module, bolelele ba cable bo lokela ho ba 5 mm. Sebelisa lehare screwdriver le 0.8 × 3.5 limilimithara boholo, fastening torque 0.5 Nm. Sheba setšoantšo sa B.
FEELAVIEW
Sheba setšoantšo sa C:
- Liteishene tsa khokahano ea M-Bus
- Boema-kepe ba Optical COM
- Beha konopo ea DEFAULT
- Phepelo ea motlakase LED
- Puisano LED
MAKHOPO
Khokahano e kholo ea hlokahala lipakeng tsa PC le marang-rang a M-Bus ho ikamahanya le boema-kepe ba RS232/USB ho netweke. Palo e kholo ea li-module tse lokelang ho hokahanngoa li ka fetoha ho latela sebopeho se sebelisitsoeng. Bakeng sa ho hokahanya har'a li-module tse fapaneng, sebelisa mohala o nang le para e sothehileng le terata ea boraro. Kamora ho etsa likhokahano tsa M-Bus, kopanya mojule o mong le o mong oa M-Bus le mitha e le 'ngoe: li behe ka lehlakore, li hlophisitsoe ka mokhoa o phethahetseng, 'me li-module optical port li shebane le meter optical port. Sheba setšoantšong sa D.
TŠEBELETSO EA LED
Li-LED tse peli li fumaneha phanele e ka pele ea module ho fana ka phepelo ea motlakase le boemo ba puisano:
| LED MALA | POTSO | BOLELA'NG |
| PHEBELO MATLA LED | ||
| – | Matla TIMA | Mojule o TIMA |
| MONAHANA | Kamehla ON | Mojule o BUTSE |
| PUISANO LED | ||
| – | Matla TIMA | Mojule o TIMA |
| MONAHANA | Ho panya butle (2 s OFF nako) | Puisano ea M-Bus=Ho lokile Puisano ea metara=Ho lokile |
| KHIBIDUDU | Ho panya ka potlako (1 s OFF nako) | Puisano ya M-Bus=phoso/e sieo Puisano ea metara=Ho lokile |
| KHIBIDUDU | Kamehla ON | Puisano ya metara=phoso/e sieo |
| TŠEHLA/KHUDUDU | Mebala e fapanyetsanang bakeng sa 5 s | SET SEBELISA mokhoa o ntseng o tsoela pele |
M-BUS MASTER KOPO
M-Bus Master ke sesebelisoa sa software se lumellang ho laola puisano ea module ea M-Bus. Ka software ena ea kopo ho ka khoneha ho:
- lemoha le ho buisana le dimojule tsa M-Bus
- fetola li-setting tsa mojule oa M-Bus
- hlahisa litekanyo tse bonoeng tsa metara ea matla e hoketsoeng mojuleng oa M-Bus
- seta sekgahla sa tekanyo le mofuta o tla fumanwa
Ho sebelisa M-Bus Master, latela litaelo:
- Hokela mojule o le mong kapa ho feta ho netweke ea M-Bus joalo ka ha ho hlalositsoe pejana.
- Beha khaontara e le 'ngoe bakeng sa mojule o mong le o mong oa M-Bus: boema-kepe ba module ea optical bo tlameha ho tobana le boema-kepe ba mithara.
- Kenya M-Bus Master ho PC.
- Qetellong ea ho kenya, tsamaisa M-Bus Master.
- Etsa patlisiso bakeng sa li-module tsa M-Bus tse fumanehang marang-rang.
PHETHA MOSEBETSI
SET DEFAULT mosebetsi o lumella ho khutlisetsa ho li-setting tsa kamehla tsa module (mohlala, haeba aterese ea mantlha ea M-Bus e lebetsoe). Ho khutlisetsa li-setting tsa kamehla, boloka konopo ea SET DEFAULT e tobetse bonyane 5 s, puisano LED e tla benya botala/khubelu bakeng sa 5 s. Qetellong ea ts'ebetso ea SET DEFAULT, LED ea puisano e tla ba khubelu e tsoelang pele e bontšang ho lokolla senotlolo.
Litlhophiso tsa kamehla:
Aterese ea mantlha ea M-Bus = 000
Aterese ea bobeli ea M-Bus (nomoro ea ID) = Boleng bo tsoelang pele ho linomoro tse 8
Lebelo la puisano la M-Bus = 2400 bps
Mask ea data e fumanoeng ho meter ke module = Default
LIEKETSENG TŠEBELE
Lintlha li lumellana le EN 13757-1-2-3 standard.
| PHEPELO EA MOTLAKASE | |
| Ka ho hokela libese |  |
| M-BESE KHOATSO | |
| Protocol | M-Bus |
| Boema-kepe | Li-terminals tse 2 tsa screw |
| Lebelo la puisano | 300 … 9600 bps |
| TS'ELISO SEBAKA | |
| Mofuta | Sebaka sa Optical |
| Lebelo la puisano | 38400 bps |
| MAIKETSO MELAETSA | |
| M-BESE | EN 13757-1-2-3 |
| EMC | EN 61000-6- 2, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11, EN 55011 Sehlopha sa A |
| Polokeho | EN 60950 |
| KAROLO YA terata BAKENG SA TERMINALS LE FASTENING TOQUE | |
| Litheminale | 0.14 … 2.5 mm2 / 0.5 Nm |
| MAEMO TIKOLO | |
| Mocheso oa ho sebetsa | -15 ° C… + 60 ° C |
| Mocheso oa polokelo | -25 ° C… + 75 ° C |
| Mongobo | 80% max ntle le condensation |
| Tekanyo ea ts'ireletso | IP20 |
Algodue Elettronica Srl
Ka P. Gobetti, 16/F
28014 Maggiora (NO), ITALY
Mohala +39 0322 89864
+39 0322 89307
www.algodue.com
support@algodue.it
Litokomane / Lisebelisoa
 |
algodue ELETTRONICA M-Bus Communication Module [pdf] Bukana ea Mosebelisi Ed2212, M-Bus Communication Module, M-Bus, Communication Module, Module |