LITŠOANTŠISO TSA AEMC F01 Clamp Multimeter
Tlhahisoleseding ya Sehlahiswa
- Lebitso la Sehlahisoa: Clamp Multimeter
- Nomoro ea mohlala: F01
- Moetsi: AEMC
- Nomoro: [Nomoro ea Seriale]
- Nomoro ea lethathamo: 2129.51
- Websebaka: www.aemc.com
Polelo ea Boikamahanyo
Re netefatsa hore nakong ea ho romelloa, sesebelisoa sa hau se kopane le litlhaloso tsa sona tse hatisitsoeng. Setifikeiti se ka lateloang sa NIST se ka koptjoa ka nako ea theko kapa ha fumanoa ka ho khutlisetsa sesebelisoa setsing sa rona sa tokiso le ho lekanya bakeng sa tefiso ea lebitso.
Nako e khothaletsoang ea ho lekanya sesebelisoa sena ke likhoeli tse 12 'me e qala ka letsatsi leo moreki a le fumanang ka lona. Bakeng sa ho nchafatsa, ka kopo sebelisa lits'ebeletso tsa rona tsa calibration. Sheba karolo ea rona ea ho lokisa le ho lekanya ho www.aemc.com.
Tafole ea likateng
Tshebetso
- EA-4.1-KStagTekanyo ea e -
- 4.2 Teko ea Tsoelo-pele ea Molumo le Tekanyo ea Khanyetso
- 4.5 Litekanyo tsa hajoale -
Tlhokomelo
- 5.1 Ho fetola betri
- 5.2 Ho hloekisa
- 5.3 Polokelo
Selelekela
Bukana ena e fana ka litaelo tsa ho sebelisa Clamp Multimeter Model F01.
Tlhokomeliso: Ka kopo latela matšoao a machaba a motlakase le mehato ea tšireletso e boletsoeng bukeng ena.
Tlhaloso ea Mekhahlelo ea Tekanyo
The Clamp Multimeter Model F01 e etselitsoe litekanyo ka mekhahlelo e latelang:
- Katse. I: Bakeng sa litekanyo ho li-circuits tse sa hokahaneng ka kotloloho le sehokelo sa phepelo sa AC joalo ka li- secondaries tse sirelelitsoeng, boemo ba matšoao, le li-circuits tse fokolang tsa matla.
- Katse. II: Bakeng sa litekanyo tse etsoang lipotolohong tse amanang ka kotloloho le sistimi ea kabo ea motlakase. Examplitekanyo tsa lisebelisoa tsa ntlo kapa lisebelisoa tse nkehang habonolo.
- Katse. III: Bakeng sa litekanyo tse etsoang mohahong oa ho kenya mohahong oa kabo joalo ka lisebelisoa tse thata ka har'a lisebelisoa tse tsitsitseng le li-circuit breakers.
- Katse. IV: Bakeng sa litekanyo tse etsoang phepelong ea motlakase ea mantlha.
Litaelo tsa Tšebeliso ea Sehlahisoa
Tshebetso
- MoqtagTekanyo ea e -
Latela litaelo tse fanoeng bukeng ea ho lekanya ka nepo voltage sebelisa Clamp Multimeter. - Teko ea Tsoelo-pele ea Molumo le Tekanyo ea ho hanyetsa
Sheba bukana bakeng sa litaelo tsa mohato ka mohato mabapi le ho etsa liteko tsa ho tsoelapele ka molumo le ho lekanya khanyetso ka Cl.amp Multimeter. - Litekanyo tsa Hona Joale -
Ithute mokhoa oa ho lekanya hajoale ho sebelisa Clamp Multimeter ka ho latela litaelo tse fanoeng bukeng ea litaelo.
Tlhokomelo
- Ho fetola betri
Sheba bukana ea litaelo bakeng sa litaelo tse qaqileng mabapi le mokhoa oa ho fetola betri ea Clamp Multimeter. - Ho hloekisa
Latela litataiso tse fanoeng bukeng ea ho hloekisa Cl hantleamp Multimeter. - Polokelo
Ithute ho boloka Clamp Multimeter ka nepo ka ho bua ka litaelo tse bukeng.
LIEKETSENG
Tlhokomediso
- Le ka mohla u se ke ua sebelisa lipotolohong tse nang le voltage phahame ho feta 600V le ho fetatagsehlopha se phahameng ho feta Katse. III.
- Sebelisa libakeng tse ka hare tse nang le Pollution Degree 2; Mocheso 0 ° C ho +50 ° C; 70% RH.
- Sebelisa feela lisebelisoa tse tsamaellanang le maemo a polokeho (NF EN 61010-2-031) 600V min le ho fetella.tage Katse. III.
- Le ka mohla u se ke ua bula klamp pele o hakolla mehloli eohle ea matla.
- Le ka mohla u se ke ua hokela ho potoloho ho lekanyetsoa haeba clamp ha e a koaloa hantle.
- Pele ho tekanyo efe kapa efe, hlahloba boemo bo nepahetseng ba lithapo ebe u switjha.
- Ha u lekanya hona joale, hlahloba hore na mokhanni o tsamaisana hantle hakae le matšoao le ho koala mehlahare hantle.
- Kamehla hakolla clamp ho tsoa mohloling ofe kapa ofe oa matla pele o fetola betri.
- Se ke oa etsa liteko tsa ho hanyetsa, liteko tsa ho tsoelapele kapa liteko tsa semi-conductor ho potoloho e tlas'a matla.
Matšoao a Machaba a Motlakase
 |
Letšoao lena le bolela hore sesebelisoa se sirelelitsoe ka ho pata habeli kapa ho matlafatsoa. |
 |
Letšoao lena le sesebeleng le bontša TLHOKOMELISO le hore opareitara o tlameha ho sheba bukana ea mosebelisi bakeng sa litaelo pele a sebelisa sesebelisoa. Bukeng ena, letšoao la litaelo tse tlang pele li bontša hore haeba litaelo li sa lateloe, kotsi ea 'mele, tlhomamisoample le sehlahisoa se ka baka tšenyo. |
 |
Kotsi ea ho tsosoa ke motlakase. Molumotage likarolong tse tšoailoeng ka letšoao lena e ka ba kotsi. |
 |
Letšoao lena le bolela mofuta oa sensor ea hona joale ea A. Letšoao lena le bolela hore kopo e haufi le ho tlosoa ho li-conductor tsa HAZARDOUS LIVE e lumelletsoe. |
 |
Tumellanong le WEEE 2002/96/EC |
Tlhaloso ea Mekhahlelo ea Tekanyo
- Katse. I: Bakeng sa litekanyo ho li-circuits tse sa hokahaneng ka kotloloho le sehokelo sa phepelo sa AC joalo ka li- secondaries tse sirelelitsoeng, boemo ba matšoao, le li-circuits tse fokolang tsa matla.
- Katse. II: Bakeng sa litekanyo tse etsoang lipotolohong tse amanang ka kotloloho le sistimi ea kabo ea motlakase. Examplitekanyo tsa lisebelisoa tsa ntlo kapa lisebelisoa tse nkehang habonolo.
- Katse. III: Bakeng sa litekanyo tse etsoang mohahong oa ho kenya mohahong oa kabo joalo ka lisebelisoa tse thata ka har'a lisebelisoa tse tsitsitseng le li-circuit breakers.
- Katse. IV: Bakeng sa litekanyo tse etsoang phepelong ea mantlha ea motlakase (<1000V) joalo ka lisebelisoa tsa mantlha tsa ts'ireletso ea overcurrent, li-ripple control unit, kapa limithara.
Ho Fumana Thomelo ea Hao
Ha u fumana thomello ea hau, etsa bonnete ba hore litaba tse ka hare li lumellana le lenane la ho paka. Tsebisa morekisi oa hau ka lintho tse sieo. Haeba thepa e bonahala e senyehile, file tleleime hang-hang le mofani oa thepa le ho tsebisa mofani oa hau hang-hang, ho fana ka tlhaloso e qaqileng ea tšenyo leha e le efe. Boloka setshelo sa ho paka se senyehileng ho tiisa tleleime ya hao.
Ho Odara Boitsebiso
Clamp-ho Multimeter Model F01 …………………………………..Katse. #2129.51
E kenyelletsa multimeter, sete ea li- lead lead tse khubelu le tse ntšo tse nang le malebela a probe, betri ea 9V, mokotla oa mokotla le buka ena ea mosebelisi.
Lisebelisoa le Likarolo tse Felletseng
Sete e ncha ea li-lead, tse khubelu le tse ntšo tse nang le malebela a lipatlisiso…. Katse. #2118.92
Katse ea Katse (4.25 x 8.5 x 2" #2119.75
Sebelisa feela lisebelisoa tse ikamahanyang le voltage le overvolvetage sehlopha sa potoloho se lokelang ho lekanyetsoa (ho ea ka NF EN 61010).
LIEKETSENG LIHLAHISO
Tlhaloso
The Clamp-ho Multimeter, Model F01 e hatisa ho tšepahala le ho nolofatsa ha tšebeliso ho arabela litlhoko tsa litsebi tsa matla.
Likaroloana:
- Yuniti e kopaneng, e kopanyang sensor ea hajoale bakeng sa litekanyo tsa matla ntle le ho senya potoloho ea teko
- Likarolo tse ikhethang tsa ergonomic:
- khetho e ikemetseng ea tekanyo ea AC kapa ea DC - V feela
- khetho e iketsang ea mabala a ho lekanya
- kemiso ea molumo oa molumotagpontšo (V-Live)
- pontsho ya “over-range”
- ho tima ka motlakase
- Ho lumellana le litekanyetso tsa polokeho ea motlakase tsa IEC le matšoao a CE
- Kaho e bobebe le e matsutla bakeng sa ts'ebeliso ea masimo
Mesebetsi ea Taolo ea Mohlala F01
- Mehlahare
- Likonopo tsa Taelo
- Phetoho ea 4 ea Rotary
- Pontšo ea Crystal ea Metsi
Rotary Switch Functions
- OFF Ho tima ha clamp, ts'ebetso e netefatsoa ka khetho ea mesebetsi e meng
- DC le AC voltagtekanyo ea e (boleng ba rms)
Tsoelo-pele le tekanyo ea ho hanyetsa- AC ampere measurement (rms value)
Tšoara Konopo Mesebetsi ea mantlha
Tobetsa e Khutšoanyane: E emisa pontšo. Pontsho e a hlakolwa ha konopo e tobetswa hape.
Konopo e Ts'oetsoeng Hantle: E nolofalletsa phihlello ea mesebetsi ea bobeli mmoho le switch ea rotary.
Tšoara Button Secondary Functions (e nang le rotary switch)
- Tlosa Mosebetsi oa Auto-Off
Ha o ntse o tobetsa konopo ea HOLD, tlisa switch ea rotary ho tloha sebakeng sa OFF ho ea hoboemo. - Yuniti e ntša molumo o hlabang habeli, joale
letšoao lea phatsima.
Sebopeho se khethiloeng se kenngoa mohopolong ha konopo e lokolloa (letšoaoe sala e khantse ka ho sa feleng). - Ho tima ho tla sebetsa hape ha switjha e kgutlela ho TIMA.
- Kenya ts'ebetso ea V-Live
(Beeper ON ha voltage > 45V tlhoro)
Ha o ntse o tobetsa konopo ea HOLD, tlisa switch ea rotary ho tloha sebakeng sa OFF ho ea sebakeng sa V. Yuniti e ntša molumo oa molumo o habeli, ebe V le letšoao lia benya. Tlhophiso e khethiloeng e kenngoa mohopolong ha konopo e lokolloa (letšoao la V lea tsitsa 'me letšoao lea phatsima).
Tsoela pele ka tsela e ts'oanang ho hatella mosebetsi oa V-Live (letšoao lea nyamela ha konopo e lokolloa). - Ho hlahisa The Internal Software Version
Ha o ntse o tobetsa konopo ea HOLD, tlisa switch ea rotary ho tloha sebakeng sa OFF ho ea sebakeng sa A. Yuniti e lla, mofuta oa software o hlahisoa ka mokhoa oa UX.XX bakeng sa metsotsoana e 2, ebe likarolo tsohle tsa ponts'o lia bontšoa. - Pontšo ea Crystal ea Metsi
Pontšo ea kristale ea mokelikeli e kenyelletsa pontšo ea dijithale ea litekanyetso tse lekantsoeng, likarolo tse amanang le matšoao.- Pontšo ea Dijithale
Linomoro tse 4, lipalo tse 9999, lintlha tse 3 tsa decimal, + le - matšoao (tekanyo ea DC)- + OL: Ho feta boleng ba boleng bo botle (>3999cts)
- – OL : Ho fetella ha boleng bo fosahetseng
- OL : Ho feta tekanyo ea boleng e sa saenneng
- - - - - : Boleng bo sa lekanyetsoang (likarolo tse bohareng)
- Pontšo ea Letšoao
TSHWARA Mosebetsi o sebetsa- Ts'ebetso ea kamehla (ha ho na motlakase o timang)
- Flashing: V-Live mosebetsi o khethiloe
E tsitsitseng: Tekanyo ea ho tsoela pele 
Tekanyo ea AC ka mokhoa oa AC
Tekanyo ea DC ka mokhoa oa DC
Flashing: matla a lekantsoeng hora e ka bang 1
E tsitsitseng: betri e ntšitsoeng, ts'ebetso le ho nepahala ha li sa tiisetsoa
- Pontšo ea Dijithale
- Buzzer
Melumo e fapaneng e hlahisoa ho latela mosebetsi o etsoang:- Modumo o mokgutshwane le o mahareng: konopo e sebetsang
- Modumo o mokgutshwane le o mahareng ka 400 ms: voltage methang e phahame ho feta tekanyo e netefalitsoeng ea polokeho ea unittage
- Melumo e 5 e iphetang ka nako e khuts'oane le e mahareng: ho tima seletsa ka boiketsetso
- Molumo o sa khaotseng o mahareng: boleng bo tsoelang pele bo lekantsoeng ka tlase ho 40Ω
- Molumo o tsitsitseng o tsitsitseng oa mahareng: boleng bo lekantsoeng ka li-volts, bo phahameng ho feta tlhoro ea 45V ha mosebetsi oa V-Live o khethoa.
LIEKETSENG TS'OANELO
Maemo a Litšupiso
23°C ±3°K; RH ea 45 ho isa ho 75%; matla a betri ho 8.5V ± 5V; maqhubu a maqhubu a 45 ho isa ho 65Hz; boemo ba conductor e tsepameng ho clamp mehlahare; bophara ba conductor .2″ (5mm); ha ho sebaka sa motlakase; ha ho na matla a khoheli a kantle a AC.
Litlhaloso tsa Motlakase
Moqtage (V)
| Range | 40V | 400V | 600V* |
| Metharo e Methang** | 0.2V ho isa ho 39.99V | 40.0V ho isa ho 399.9V | 400 ho 600V |
| Ho nepahala | 1% ea ho Bala
+ 5cts |
1% ea ho Bala
+ 2cts |
1% ea ho Bala
+ 2cts |
| Qeto | 10mV | 0.1V | 1V |
| Kena Impedans | 1MW | ||
| Tšireletso e Felletseng | 600VAC / DC | ||
* Ho DC, ponts'o e bonts'a +OL ka holimo ho +600V le -OL ka holimo -600 V.
Ho AC, ponts'o e bonts'a OL ho feta 600Vrms.
**Ho AC haeba boleng ba voltage lekantsoeng ke <0.15V pontšo e bonts'a 0.00.
Audio Continuity ( ) / Resistance Measurement (Ω)
| Range | 400W |
| Mekhahlelo ea ho lekanya | 0.0 ho isa ho 399.9W |
| Ho nepahala* | 1% ea ho Bala + 2cts |
| Qeto | 0.1W |
| Bula Potoloho ea Voltage | £3.2V |
| Ho lekanya Hona Jwale | 320µA |
| Tšireletso e Felletseng | 500VAC kapa 750VDC kapa tlhoro |
*ka matšeliso bakeng sa tekanyo ea khanyetso ea lead
Hona joale (A)
| Pontšo Range | 40A | 400A | EA-600A |
| Metharo e Methang** | 0.20 ho isa ho 39.99A | 40.0 ho isa ho 399.9A | 400 ho isa ho 600A tlhoro |
| Ho nepahala | 1.5% ea ho Bala + 10cts | 1.5% ea ho Bala + 2cts | |
| Qeto | 10mA | 100mA | 1A |
* Pontšo e bonts'a OL ho feta 400Arms.
**Ho AC, haeba boleng ba tekanyo ea hajoale e le <0.15A, ponts'o e bonts'a 0.00.
- Betri: 9V alkaline betri (mofuta oa IEC 6LF22, 6LR61 kapa NEDA 1604)
- Bophelo ba Battery: 100 hrs approx
- Ho tima: Ka mor'a metsotso e 10 ho se mosebetsi
Litlhaloso tsa Mechini
Mocheso:
- sebaka sa litšupiso
- Sebaka sa Ts'ebetso
- Sebaka sa polokelo (ntle le betri)
- Mocheso oa ho sebetsa: 32 ho 122 ° F (0 ho 50 ° C); 90% RH
- Mocheso oa polokelo: -40 ho 158 ° F (-40 ho 70 ° C); 90% RH
- Altitude:
Ts'ebetso: ≤2000m
Polokelo: ≤12,000m - Litekanyo: 2.76 x 7.6 x 1.46 ″ (70 x 193 x 37mm)
- Boima ba 'mele: 9.17 oz (260g)
- Clamp Matla a tiisang: ≤1.00” (≤26mm)
Litlhaloso tsa Tšireletso
- Tšireletseho ea Motlakase
(ho ea ka EN 61010-1 ed. 95 le 61010-2-032, ed. 93)- Insulation habeli
- Sehlopha sa III
- Tekanyo ea Tšilafalo 2
- E lekantsoe Voltage 600V (RMS kapa DC)
- Insulation habeli
- Litšisinyeho tsa Motlakase (teko ho latela IEC 1000-4-5)
- 6kV ka mokhoa oa RCD ts'ebetsong ea voltmeter, tekanyetso ea bokhoni B
- 2kV e kentsoeng thapong ea tekanyo ea hajoale, tekanyetso ea bokhoni B
- Tšebelisano ea Motlakase (ho ea ka EN 61326-1 ed. 97 + A1)
- Phaello: sehlopha sa B
Ho itšireletsa mafung: - Lits'oants'o tsa motlakase:
4kV mabapi le ho kopana, tekanyetso ea bokhoni B
8kV moeeng, tekanyetso ea bokhoni B - Sebaka sa mahlaseli: 10V/m, tekanyetso ea bokhoni B
- Liphetoho tse potlakileng: 1kV, tekanyetso ea bokhoni B
- Tšitiso ea conduit: 3V, criterion aptitude A
- Phaello: sehlopha sa B
- Khanyetso ea Mechini
- Ho oa mahala 1m (teko ho latela IEC 68-2-32)
- Tšusumetso: 0.5 J (teko ho latela IEC 68-2-27)
- Ho sisinyeha: 0.75mm (teko ho latela IEC 68-2-6)
- Ho timela ka bohona (ka UL94)
- Matlo V0
- Mehlaha V0
- Fensetere e bonts'ang V2
Liphetoho tsa Range ea Ts'ebetso
| Tšusumetso
Bongata |
Meea. Range Quantities | Bongata bo Susumelitsoeng | Tšusumetso
E tloaelehileng Max |
|
| Battery Voltage | 7.5 ho 10V | Tsohle | – | 0.2% R + 1ct |
| Mocheso | 32 ho isa ho 122°F | VA
W |
0.05% R/50°F
0.1% R/50°F 0.1% R/50°F |
0.2% R/50°F + 2cts
0.2% R/50°F + 2cts 0.2% R/50°F + 2cts |
| Mongobo o Batlang | 10 ho isa ho 90% RH | VA
W |
≤1ct 0.2% R
≤1ct |
0.1% R + 1ct 0.3% R + 2cts 0.3% R + 2cts |
|
Khafetsa |
40Hz ho isa 1kHz 1kHz ho 5kHz 40Hz ho 400Hz 400Hz ho isa ho 5kHz | V
A |
bona mothinya
bona mothinya |
1% R + 1ct
6% R + 1ct 1% R + 1ct 5% R + 1ct |
| Boemo ba mokhanni ka mehlahareng
(f ≤ 400Hz) |
Boemo ka hare ho pherimithara mehlahare |
A |
1% R |
1.5% R + 1ct |
| Conductor e haufi e nang le AC current (50Hz) e tsamaeang | Mokhanni ea kopane le pherimitha e kantle ea mehlahare |
A |
40dB |
35dB |
| Mokhanni clamped | 0 ho isa ho 400VDC kapa rms | V | <1ct | 1ct |
| Tšebeliso ea voltage ho clamp | 0 ho isa ho 600VDC kapa rms | A | <1ct | 1ct |
|
Tlhōrō ea ntlha |
1.4 ho 3.5 e lekanyelitsoe ho 600A tlhoro ea 900V | AV | 1% R
1% R |
3% R + 1ct
3% R + 1ct |
| Ho hana mokhoa oa letoto ho DC | 0 ho 600V / 50Hz | V | 50dB | 40dB |
| Ho hana mokhoa oa letoto ho AC | 0 ho isa ho 600VDC
0 ho isa ho 400 ADC |
VA | <1ct
<1ct |
60dB
60dB |
| Ho hana mokhoa o tloaelehileng | 0 ho 600V / 50Hz | VA | <1ct 0.08A/100V | 60dB
0.12A/100V |
| Tšusumetso ea matla a khoheli a kantle | 0 ho isa ho 400A/m (50Hz) | A | 85dB | 60dB |
| Palo ea metsamao ea ho bula mohlahare | 50000 | A | 0.1% R | 0.2% R + 1ct |
Mefuta e Tloaelehileng ea Karabelo ea Maqhubu
- – V = f (f)
- – ke = f (f)
TS'EBETSO
Moqtage Tekanyo – ( )
- Hokela litekanyo ho liteishene tsa sesebelisoa, ho latela polarities e bontšitsoeng: lead lead ho "+" le lead e ntšo ho "COM".
- Beha phetoho ea rotary sebakeng sa "".
- Hokela yuniti ho voltage mohloli o lokelang ho lekanyetsoa, ho etsa bonnete ba hore voltage ha e fetise meeli e amohelehang e amohelehang (bona § 3.2.1).
- Range switching le khetho ea AC/DC li iketselitse
Haeba lets'oao le lekantsoeng ke> 45V tlhōrō, pontšo ea molumo e sebelisoa haeba mosebetsi oa V-Live o khethiloe (bona § 2.6.2).
Bakeng sa voltages ≥600Vdc kapa rms, molumo o pheta-phetoang o bontša hore molumo o lekantsoengtage phahame ho feta bophahamo bo amohelehang ba polokehotage (OL).
- Range switching le khetho ea AC/DC li iketselitse
Teko ea Tsoelo-pele ea Audio - ( ) le
Tekanyo ea Resistance – (Ω)
- Kopanya litekanyo tse lebisang ho li-terminals.
- Beha phetoho ea rotary sebakeng sa "".
- Hokela yuniti ho potoloho ho lekoa. Buzzer e tsoela pele ho sebetsa hang ha ho kopana ho thehoa (potoloho e koetsoe) 'me haeba boleng ba ho hanyetsa bo lekantsoeng bo ka tlase ho 40Ω.
HLOKOMELA: Ka holimo ho 400Ω, ponts'o e bontša OL.
Litekanyo tsa Hona Joale - ( )
- Beha switjha ea rotary sebakeng sa """ ".
- Clamp mokhanni ea jereng motlakase o lokelang ho lekanyetsoa, ho hlahloba ho koala hantle ha mehlahare le ntho e tsoang linaheng tse ling lekhalong.
Range switching le khetho ea AC/DC li iketselitse.
TLHOKOMELO
Sebelisa feela likarolo tse ncha tse boletsoeng ke feme. AEMC® e ke ke ea jara boikarabello bakeng sa kotsi efe kapa efe, ketsahalo, kapa ho se sebetse hantle ka mor'a tokiso e entsoeng ntle le setsi sa eona sa lits'ebeletso kapa setsi sa tokiso se lumelletsoeng.
Ho fetola betri
Hakolla sesebelisoa mohloling ofe kapa ofe oa motlakase.
- Beha switjha hore e TIMA.
- Tsamaisa screwdriver sekoting se kaholimo ho sekoaelo sa betri (kamorao ho clamp) ebe o sutumelletsa sekwahelo sa betri hodimo.
- Tlosa betri e sebelisitsoeng sebakeng sa 9V (mofuta oa LF22), u shebile polarities.
- Kenya betri ka tlung ea eona, ebe o hokela sekoaelo sa betri hape.
Ho hloekisa
Hakolla sesebelisoa mohloling ofe kapa ofe oa motlakase.
- Sebelisa lesela le bonolo hanyenyane dampe kentsoeng ka metsi a sesepa.
- Hlatsoa ka papatsoamp lesela ebe o omella ka lesela le ommeng.
- U se ke ua fafatsa metsi ka ho toba ho clamp.
- U se ke ua sebelisa joala, solvents kapa hydrocarbons.
- Etsa bonnete ba hore lekhalo le pakeng tsa mehlahare le bolokoa le hloekile 'me le se na litšila ka linako tsohle, ho thusa ho netefatsa ho bala ho nepahetseng.
Polokelo
Haeba sesebelisoa se sa sebelisoe nako e fetang matsatsi a 60, tlosa betri 'me u e boloke ka thoko.
Ho lokisa le ho lekanya
Ho etsa bonnete ba hore sesebelisoa sa hau se kopana le lintlha tsa feme, re khothaletsa hore se romelloe Setsing sa rona sa Ts'ebeletso sa feme ka nako ea selemo se le seng bakeng sa ho nchafatsoa, kapa joalo ka ha ho hlokoa ke maemo a mang kapa mekhoa ea ka hare.
Bakeng sa ho lokisa le ho lekanya lisebelisoa:
O tlameha ho ikopanya le Setsi sa rona sa Tshebeletso bakeng sa Nomoro ya Tumello ya Tshebeletso ya Bareki (CSA#). Sena se tla etsa bonnete ba hore ha sesebelisoa sa hau se fihla, se tla lateloa le ho sebetsoa hang-hang. Ka kopo, ngola CSA# ka ntle ho sejana sa thepa. Haeba sesebelisoa se khutlisetsoa hore se lokisoe, re hloka ho tseba hore na u batla tlhahlobo e tloaelehileng, kapa tlhahlobo e ka lateloang ho ea ho NIST (E kenyelelitse setifikeiti sa calibration hammoho le data e rekotiloeng ea calibration).
Chauvin Arnoux®, Inc.
dba AEMC® Lisebelisoa
15 Faraday Drive
Dover, NH 03820 USA
Mohala: 800-945-2362 (Ext. 360)
603-749-6434 (Ext. 360)
Fax: 603-742-2346 or 603-749-6309
repair@aemc.com
(Kapa ikopanye le mophatlalatsi oa hau ea lumelletsoeng)
Litšenyehelo tsa ho lokisoa, litekanyo tse tloaelehileng, le litekanyo tse lateloang ho NIST lia fumaneha.
HLOKOMELA: Bareki bohle ba tlameha ho fumana CSA # pele ba khutlisa sesebelisoa leha e le sefe.
Thuso ea Theknoloji le Thekiso
Haeba u na le mathata afe kapa afe a tekheniki, kapa u hloka thuso efe kapa efe ka ts'ebetso e nepahetseng kapa ts'ebeliso ea sesebelisoa sa hau, ka kopo letsetsa, romella lengolo-tsoibila, fekse kapa e-mail hotline ea rona ea tšehetso ea tekheniki:
Chauvin Arnoux®, Inc.
dba AEMC® Instruments 200 Foxborough Boulevard Foxborough, MA 02035, USA
Mohala: 800-343-1391 508-698-2115
Fax: 508-698-2118
techsupport@aemc.com
www.aemc.com
HLOKOMELA: Se ke oa romella lisebelisoa ho aterese ea rona ea Foxborough, MA.
Tiisetso e Lekanyelitsoeng
Model F01 e tiisetsoa ho mong'a eona nako ea selemo ho tloha ka letsatsi leo e rekiloeng ka lona khahlano le liphoso tse entsoeng. Tiisetso ena e lekanyelitsoeng e fanoa ke AEMC® Instruments, eseng ke morekisi eo e rekiloeng ho eena. Tiisetso ena ha e na letho haeba yuniti e bile tampe entsoe, e hlekefelitsoe kapa haeba sekoli se amana le ts'ebeletso e sa etsoang ke AEMC® Instruments.
Bakeng sa ts'ireletso e felletseng le e felletseng ea tiisetso, ka kopo bala Tlhahisoleseding ea Kakaretso ea Tiisetso, e hokeletsoeng Karete ea Ngoliso ea Warranty (haeba e kentsoe) kapa e fumaneha ho www.aemc.com. Ka kopo boloka Boitsebiso ba Tšireletso ea Tiisetso le lirekoto tsa hau.
Seo AEMC® Instruments e tla se etsa:
Haeba bothata bo etsahala nakong ea selemo se le seng, o ka khutlisetsa sesebelisoa ho rona bakeng sa ho e lokisa, ha feela re na le tlhaiso-leseling ea hau ea ngoliso ea tiisetso ho file kapa bopaki ba theko. Lisebelisoa tsa AEMC® ka khetho ea tsona, li tla lokisa kapa li nkele thepa e fosahetseng sebaka.
JOALE U KA NGOLISA INTHANETENG HO: www.aemc.com
Litokiso tsa Tiisetso
Seo u lokelang ho se etsa ho khutlisa Sesebelisoa sa Tokiso ea Tiisetso:
Pele, kopa Nomoro ea Tumello ea Tšebeletso ea Bareki (CSA#) ka mohala kapa ka fekse ho tsoa Lefapheng la rona la Tšebeletso (sheba aterese e ka tlase), ebe u khutlisetsa sesebelisoa hammoho le Foromo ea CSA e saennoeng. Ka kopo, ngola CSA# ka ntle ho sejana sa thepa. Khutlisetsa sesebelisoa, postage kapa thomello e lefelletsoe esale pele ho:
Chauvin Arnoux®, Inc. dba AEMC® Lisebelisoa
Lefapha la Tšebeletso
15 Faraday Drive • Dover, NH 03820 USA
Mohala: 800-945-2362 (Ext. 360) 603-749-6434 (Ext. 360)
Fax: 603-742-2346 or 603-749-6309
repair@aemc.com
Tlhokomeliso: Ho itšireletsa khahlanong le tahlehelo ea leetong, re khothaletsa hore o be le inshorense ea thepa e khutlisitsoeng.
HLOKOMELA: Bareki bohle ba tlameha ho fumana CSA # pele ba khutlisa sesebelisoa leha e le sefe.
Chauvin Arnoux®, Inc. dba AEMC® Lisebelisoa
15 Faraday Drive
Dover, NH 03820 USA
Mohala: 603-749-6434
Fax: 603-742-2346
Litokomane / Lisebelisoa
 |
LITŠOANTŠISO TSA AEMC F01 Clamp Multimeter [pdf] Bukana ea Mosebelisi F01, F01 Clamp Multimeter, Clamp Multimeter, Multimeter |