Buka ea mosebelisi ea PixLite 4 Mk2
Hardware Rev 1.0

Selelekela

Ena ke buka ea mosebelisi bakeng sa selaoli sa pixel sa PixLite 4 Mk2, mofuta oa hardware 1.0. Balaoli ba PixLite 4 Mk2 ba fetola liprothokholo tsa E1.31 (sACN) kapa Art-Net ho tsoa ho console ea mabone, seva ea media kapa software ea mabone ea komporo ho liprothokhole tse fapaneng tsa pixel LED.
The PixLite 4 Mk2 features an output capacity of up to 24 universes of multicast/unicast E1.31 or Art-Net data. It also outputs an additional 1 universe of data on 1 DMX512 output, operating from the same Ethernet protocol, bringing the total number of universes up to 25. This, combined with an advanced feature- set and easy- to- use configuration software, makes the PixLite 4 Mk2 an excellent choice for your pixel lighting application.
Bukana ena e akaretsa likarolo tsa 'mele tsa molaoli oa PixLite 4 Mk2 le mehato ea eona ea ho seta feela. Lintlha tse qaqileng mabapi le likhetho tsa eona tsa tlhophiso li ka fumanoa ho 'PixLite Configuration Guide'. Litaelo tse ling le Tataiso ea Tlhophiso ea PixLite e ka khoasolloa mona: www.advateklighting.com/downloads

Lintlha tsa Polokeho

Boto e tla e romelloa ka mokotla oa anti-static 'me e na le likarolo tse' maloa tsa motlakase ho eona. Mehato e nepahetseng ea anti-static e lokela ho hlokomeloa ha ho tšoaroa boto. Bakeng sa mohlalaample, ha ua lokela ho lula molaoli holim'a k'hapete, 'me u lokela ho qoba ho ama likarolo tsa molaoli ho sa hlokahale.

Ho kenya

4.1 - Ho Fana ka Matla
Matla ho molaoli le liphetho a sebelisoa ka sehokelo sa "power bank screw" terminal, se ka lehlakoreng le letšehali la boto, joalo ka ha ho bonts'itsoe ho Setšoantšo sa 1 se ka tlase. E tšoailoe ka ho hlaka ho PCB ka polarity.
Voltage can be anywhere between 5V and 12Vdc . The controller will operate up to 24Vdc, however attention should be paid to cooling the controller when operating above 12V.
Hlokomela: Ke boikarabello ba mosebedisi ho netefatsa hore phepelo ya motlakase e sebediswang e tsamaellana le voltage ea sebopeho sa pixel seo ba se sebelisang le hore se ka fana ka palo e nepahetseng ea matla/a hona joale.
Kakaretso ea boholo ba hajoale ke 30A.

4.2 - Li-Fuse tsa Sephetho
Each individual output is protected by a mini blade fuse. The PixLite 4 Mk2 comes with 5A fuses by default. You may use any value of fuse, up to and including 7.5A, depending on your specific application. Individual outputs should not exceed 7.5A and the total current should not exceed 30A.

4.3 - Matla a utloahalang
Matla a logic a laoloa ka tsela e iketsang ho tsoa ho kenyelletso ea matla. Hokela feela motlakase oa hau oa DC ho latela lintlha tse thathamisitsoeng Karolong ea 8.1 ho kenyelletso ea motlakase.
4.4 - Laola Data
Lintlha tsa Ethernet li hokahantsoe ka thapo e tloaelehileng ea netweke ho jeko ea RJ45 Ethernet e ka letsohong le letona la yuniti. Molaoli o tšehetsa Phallo ea ACN (sACN / E1.31) kapa data ea Art-Net.
4.5 - Ho hokela li-LED tsa Pixel
Palo ea lipikselse tseo PixLite 4 Mk2 e ka li khanna li bonts'itsoe ho Setšoantšo sa 2 ka tlase.

The pixel lights are connected directly via the 4 pluggable screw terminal connectors on the board.
Each connector is labelled with its output channel number (1- 4 ) and pin 1 is also clearly marked (There is also a pin- out for the connectors clearly marked on the PCB silk- screen for quick reference) . Simply wire your lights into each screw terminal and then plug them into the mating sockets.
Tlhokomeliso: Ho bohlokoa haholo hore o se ke oa khutsufatsa + ho oache kapa mela ea data ha o sebelisa lipikselse tse kholo ho feta 5V. Kaha phoso ena e ka etsahala, potoloho e eketsehileng ea ts'ireletso e kentsoe ho thibela tšenyo leha e le efe ho CPU e kholo. Leha ho le joalo, haeba karolo ea buffer ea tlhahiso e senyehile ka lebaka la ho khutsufatsa, e etselitsoe ho nkeloa sebaka habonolo ke mosebelisi. Karolo e theko e tlase ho e nkela sebaka mme tšehetso ea Advatek e tla u tataisa ts'ebetsong haeba u lumela hore sena se etsahetse. Hlokomela hore sena se ka boela sa etsahala ka lebaka la ho se kenelle metsi hantle ha borikhoe ba pula bo phahamengtage kene ho e 'ngoe ea lithapo tseo ho li-pixels/ wiring tsa hau.
Bolelele ba cable pakeng tsa tlhahiso le pixel ea pele ha boa lokela ho feta 15m.
Setšoantšo sa 3 se bonts'a pin-out ea lihokelo tsa tlhahiso ea pixel.

4.6 - Mokhoa o atolositsoeng
Haeba lipikselse tsa hau li sebelisa mohala o le mong feela oa data, u ka khetha ho kenya tšebetsong mokhoa o atolositsoeng ho molaoli. Haeba u sebelisa PixLite 4 Mk2 e nang le PixLite T16X- S Mk3, mokhoa o atolositsoeng o tlameha ho sebelisoa, ho bolelang hore lipikselse li ka sebelisa mohala o le mong feela oa data. Lithako tsa oache ha lia hokahanngoa, joalo ka ha ho latela pinout e ka tlase. Ka mokhoa o atolositsoeng, matšoao a oache a reretsoe hape bakeng sa matšoao a data. Sena se bolela hore molaoli o na le liphetho tsa pixel tse imenneng habeli (8), empa halofo ea pixels e 'ngoe le e 'ngoe e ka tsamaisoa.
Mokhoa o atolositsoeng o ka thusa ho eketsa ho fetoha ha maemo tsamaisong kaha ho na le liphetho tse ngata tse fumanehang. E ka boela ea thusa ka ho hasanya palo ea lipikselse tse laoloang ho tsoa lihlahisoa tse ngata, tse ka thusang ho finyella litekanyetso tse phahameng tsa ho khatholla haeba li-pixels tse nang le nako li sa sebelisoe.
Pinout ea mokhoa o atolositsoeng e bonts'itsoe ho Setšoantšo sa 4 ka tlase.

Tlhophiso ea Marang-rang

5.1 - Moralo oa Marang-rang

Setšoantšo sa 5 se bonts'a topology e tloaelehileng ea marang-rang bakeng sa PixLite 4 Mk2 controller(s) LAN. Lisebelisoa tse sebelisang multicast sACN li tla rua molemo ho sebelisoa ha IGMP Snooping lisebelisoa tsa marang-rang tse nolofalitsoeng ha ho na le bokahohle bo bongata ba marang-rang ho feta leha e le efe eo PixLite e e sebelisang. Haeba ho na le li-universe tse fetang 96 tsa multicast sACN marang-rang, IGMP Snooping e tlama.
Ho ba le router marang-rang ha ho tlamehe empa ho molemo bakeng sa tsamaiso ea aterese ea IP ka DHCP (sheba Karolo ea 5.2.1). Ha IGMP e snooping, router e kanna ea hlokahala (ho ipapisitse le ts'ebetso ea switch ea netweke ea hau).

Ka ho kenya mochine o le mong oa taolo, ho ka 'na ha e-ba molemo ho hokahanya molaoli ka ho toba mochine oa moeti, joalokaha ho bontšitsoe setšoantšong sa 6. Cable ea crossover ha e hlokehe tabeng ena, empa e ka sebelisoa haeba e lakatsa.
Li-controller li ka kopanngoa ka kotloloho ho LAN efe kapa efe e neng e ntse e le teng joalo ka media oa hau, marang-rang a lapeng kapa a ofisi, litšoantšo tse kaholimo li fanoe feela joalo ka ex.amples.

5.2 - Aterese ea IP
5.2.1 - Ho sebelisa router
Li-routers li na le seva sa DHCP ho tsona - sena se bolela hore ba tla bolella sesebelisoa se kentsoeng ho bona hore na se sebelise aterese ea IP efe, haeba se botsoa.
DHCP e lula e sebelisoa ka mokhoa o ikhethileng ho selaoli sa PixLite kahoo e ka hokela hanghang marang-rang leha e le afe a teng ka router. Leha ho le joalo, ho e-na le hoo, u ka khetha ho fana ka aterese ea IP e tsitsitseng hang ha lipuisano li se li thehiloe ka Advatek Assistant . Haeba molaoli a le maemong a DHCP 'me a sa fuoa aterese ea IP ke seva sa DHCP, e tla tima ka mor'a nako e khuts'oane (hoo e ka bang metsotsoana e 30) ebe e ea ho IP e tsitsitseng ea '192.168.0.50'.
Haeba mokhoa oa DHCP o lumelletsoe, li-LED tsa boemo le matla li tla bonesa hammoho ho fihlela molaoli a fumana aterese ea IP kapa linako tse tsoang ho IP ea hae ea kamehla. Ka mor'a sena, matla a LED a tla lula a tiile 'me boemo ba LED bo tla benya, bo bontšang hore bo ntse bo sebetsa 'me bo loketse ho sebelisoa.
Haeba aterese ea IP e tsitsitseng e abeloa molaoli, joale matla a LED a tla ba a tiileng ho tloha matla ho ea holimo.

5.2.2 - Ho sebelisa Switch/Direct
Ho ka 'na ha hlokahala ho hokahanya molaoli ho marang-rang ntle le seva sa DHCP kapa esita le ka ho toba mochine o amohelang ho e-na le ho sebelisa router. Tabeng ena (ka lekhetlo la pele tlhophiso) o tla hloka ho etsa bonnete ba hore adaptara ea marang-rang ea komporo ea hau e behiloe maemong a IP ao molaoli a tla lula a le ho ona (taolo e ea ho 192.168.0.50). Sena se bolela IP ea PC ea hau e lokela ho ba 192.168.0.xxx moo xxx e leng ntho leha e le efe pakeng tsa 1 le 254, ntle le 50. The subnet mask ho PC ea hau e lokela ho behoa ho 255.255.255.0.
Hlokomela: Software ea Advatek Assistant e tla iponela ka bo eona hore na molaoli o hokahane le marang-rang, leha e le kantle ho sebaka sa liaterese tsa IP tsa adaptara. E tla u susumelletsa hore u fetole litlhophiso tsa IP haeba boemo bona bo fumanoa.
Hang ha o ka fumana molaoli ka katleho ho Advatek Assistant, re khothalelitse ho beha molaoli atereseng e sa fetoheng ea IP ntle le ea kamehla.
Setšoantšo sa 7 se bonts'a skrini sa litlhophiso tse tloaelehileng tsa marang-rang a khomphutha ho buisana le molaoli oa PixLite 4 Mk2 ka lekhetlo la pele ntle le router.

5.2.3 - Ho Qobella Aterese ea IP ea kamehla
Haeba u lebala IP ea molaoli 'me u sa e bone ho Mothusi oa Advatek, e ka qobelloa ho IP ea eona ea kamehla. Mokhoa o bonolo o ka sebelisoa ha o phahamisa motlakase:

1. Tšoara konopo ea "Factory IP" ho PCB 'me u matlafatse molaoli
2. Ka mor'a metsotsoana e seng mekae lokolla konopo. Aterese ea IP ea molaoli joale e tla ba 192.168.0.50.

Hona joale o lokela ho khona ho theha litlhophiso tsa marang-rang a PC ea hau ho fumana molaoli ho IP ena le ho fetola litlhophiso tsa IP ho aterese ea IP e ratoang.

Tshebetso

6.1 - Ho qala
Ha a sebelisa matla, molaoli o tla qala ka potlako ho ntša data ho lipikselse, a laela hore lipikselse li tima. Haeba ho se na data e romelloang ho molaoli, lipikselse li tla lula li koetsoe ho fihlela data e nepahetseng e amoheloa. Nakong ea ts'ebetso e tloaelehileng, matla a tala a LED a tla lula a tiile 'me boemo bo bofubelu ba LED bo tla benya ho bontša hore molaoli o ntse a sebetsa le ho ntša data leha e le efe e fumanoeng ea Ethernet ho lipikselse.

6.2 - Ho romella Lintlha
Lintlha tse kenang li romelloa ho tloha ho PC ea taolo ea PC / seva / lebone ho molaoli ka Ethernet ho sebelisa "DMX over IP" protocol e kang sACN (E1.31) kapa Art-Net.
Haeba ho se na data e kenang e amoheloang ka metsotsoana e seng mekae, li-pixels li tla tingoa ka bohona ntle le haeba khetho eo e koetsoe tlhophisong ea hau. Haeba lipikselse li sa laolehe, etsa bonnete ba hore u khethile mofuta o nepahetseng oa pixel IC ho Advatek Assistant tlas'a tab ea 'LED'.

6.3 – Dipoelo
6.3.1 - Litholoana tsa Pixel
E 'ngoe le e' ngoe ea liphetho tse 4 ho PixLite 4 Mk2 e ka khanna ho fihla ho li-universe tse 6 tsa data. Sena se lumella hore kakaretso ea bokahohle bo fihlang ho 24 e lelekoe ho molaoli a le mong.
Sekhahla sa ho khatholla sa pixel se tla itšetleha ka makhetlo a ts'ebetso ea mofuta o itseng oa pixel chip.
Lipikselse tsa lebelo le holimo li tla fella ka litefiso tse phahameng tsa ho khatholla. Lipikseli tse se nang oache li tla ba le sekhahla se batlang se le tlase sa ho khatholla ha palo e kholo ea pixel e sebelisoa tlhahisong e le 'ngoe. Advatek e khothaletsa ts'ebeliso ea lipikselse tse ts'oaretsoeng nako le nako ha u sebelisa palo e kholo ea lipikselse tse latellanang ho tlhahiso efe kapa efe. Ka tloaelo, sekhahla sa ho khatholla se ka fapana ho tloha ho 20fps pheletsong e tlase ho lipikselse tsa data feela le ho fihla ho 100+fps qetellong.

6.3.2 – DMX512 Output
The PixLite 4 Mk2 provides 1 DMX512 output which can be accessed by pluggable screw terminal connectors. The hardware layer on which the DMX512 protocol operates is the RS485 electrical communications standard. This is a differential transmission system consisting of a two- wire differential signal pair and a ground connection. Ideally the differential signals should be wired into a twisted pair cable. The D+, D- and ground connections are clearly labelled on the PCB for the screw terminal connectors.
Sehlahisoa sena se sebetsa e le sehlahisoa sa bokahohle sa DMX512, ka katleho se fa mosebelisi E1.31 kapa Art-Net ho borokho ba 1 x DMX512 (ho phaella ho liphello tse tloaelehileng tsa pixel).
Hlokomela: Liphetho tsa DMX ha lia aroloa ka motlakase.

6.3.3 - Phatlalatso ea Barati
Molaoli o na le sehlahisoa sa fan se thusang se ka matlafatsang fan (s) ea kantle bakeng sa ho pholisa sebaka seo molaoli a kentsoeng ho sona, joalo ka ha ho bonts'itsoe ho Setšoantšo sa 8 ka tlase. Sebopeho sena se na le thuso ho boloka mocheso o laoloa ha o kenya molaoli le wat e phahamengtage phepelo ea motlakase hammoho sebakeng se senyane, se koetsoeng.

Tlhahiso voltage ea tlhahiso ea fan e ts'oana le phallo ea voltage. Kahoo, ho tsamaisa fan ea 12V bakeng sa example, o tla hloka ho sebelisa 12V input voltage. Sehlahisoa sa fan se ka fana ka 15W ea matla a tsoelang pele a hlahisoang mme e laoloa ke PWM. Sehlahisoa se sirelelitsoe ke fuse ea 3A mini-blade.
Haeba molaoli o sebetsa ka holimo ho 12V, tšebeliso ea tšobotsi ena e khothaletsoa haholo.
Ts'ebetso ea mantlha e tjena: Ho Mothusi oa Advatek, mosebelisi a ka seta mocheso oo sebaka se koaletsoeng se ke keng sa o feta. Mookameli o tla fetola lebelo la fan ka bohona ho latela mocheso oa hajoale joalo ka ha o lekantsoe ke sensor ea mocheso oa board.
Bakeng sa mohlalaample, haeba thempereichara e hlahisitsweng e behilwe ho 30°C ebe nako e nngwe pele ho mocheso oo, molaodi o tla bulela fan ebe butle-butle a r.amp ka lebelo ho fihlela e fihla ho 100% ha ho hlokahala, ka boiteko ba ho boloka mocheso o le ka tlase ho 30°C kapa ka tlase. Haeba mocheso o fokotseha, fene e tla theoha butle. Molaoli o tla leka ho boloka mocheso o ka tlase ho sebaka se behiloeng. Haeba mocheso o fumanoeng o fihla mocheso o behiloeng, tlhahiso ea fan e tla ba 100% ntlheng ena.

6.4 - Mokhoa oa Teko ea Hardware
The controller features a built-in test pattern to assist in troubleshooting during an installation. To put the controller into this mode, press and hold the ‘Factory IP ’ button for 3 seconds (after the controller is already running) or turn it on remotely from the  “Test” tab in the Advatek Assistant.
Mookameli o tla kenya mokhoa oa mokhoa oa teko, moo mekhoa e fapaneng ea liteko e fumanehang joalokaha e hlalositsoe tafoleng e ka tlase. Paterone e tla bonts'a paterone ea teko ho lipikselse tsohle ho sephetho se seng le se seng sa pixel le liphetho life kapa life tse nolofalitsoeng tsa DMX512 ka nako e le 'ngoe. Ho tobetsa konopo ea 'Factory IP' ha u ntse u le tekong ho tla tsamaea ho e 'ngoe le e 'ngoe ea lipaterone ka tatellano ho lupu e le 'ngoe e tsoelang pele.

Teko	Tshebetso
	Lintho tse hlahisoang li tla itlhahisa ka har'a mebala e khubelu, e tala, e putsoa le e tšoeu ka linako tse itseng. Ho tobetsa konopo ho fetela mokgweng o latelang.
	Bokhubelu bo tiileng
	Botala bo tiileng
	Putsoa e tiileng
	Bosoeu bo Tiileng
	Litholoana li tla tsamaea butle ka har'a ho fifala ha 'mala ho sa khaotseng. Ho tobetsa konopo ho tla khutlela ho mokhoa oa pele oa tlhahlobo ea mebala.

Ho tsoa tekong ea teko, tobetsa 'me u tšoare konopo ea' Factory IP' fatše hape ka metsotsoana e 3 ebe oa e lokolla.
Teko ea hardware e hloka hore mofuta oa chip ea mokhanni oa pixel le palo ea lipikselse ka tlhahiso li behoe ka nepo ho Advatek Assistant . Ka tsela ena u ka leka hore na karolo eo ea tlhophiso ea hau e nepahetse 'me u arole mathata a mang a ka bang teng ka lehlakore la data la Ethernet.

Lisebelisoa tsa Firmware

Molaoli o khona ho ntlafatsa firmware ea eona (software e ncha). Ntlafatso e atisa ho etsoa ho lokisa mathata kapa ho kenya likarolo tse ncha.
Ho etsa ntlafatso ea firmware, etsa bonnete ba hore PixLite 4 Mk2 ea hau e hokahantsoe le marang-rang a LAN ho latela Karolo ea 5.1.
Firmware ea morao-rao e fumaneha ho tsoa ho Advatek websebaka sehokelong se latelang: www.advateklighting.com/downloads
E jarollotsoeng file e tla bolokoa ka mokhoa oa ".zip", o lokelang ho ntšoa. ".hex" file ke ea file seo molaoli a se hlokang.

7.1 - Ho etsa Nchafatso e Tloaelehileng

1. Bula Advatek Assistant. Tobetsa "Batla" 'me hang ha molaoli ea lakatsehang a hlaha ka fensetere e ka sehloohong, tobetsa habeli ho eona.
2. Ho tla hlaha fensetere ea litlhophiso. Tobetsa ho "Misc" tab 'me u fumane konopo ea "Update Firmware"' me u tobetse ho eona. Ho tla hlaha fensetere ea "firmware update", joalokaha ho bontšitsoe setšoantšong sa 9 ka tlase. Tobetsa "browsing" ho fumana firmware file u lakatsa ho sebelisa.
3. Tobetsa konopo ea "update".
4. Hang ha ntlafatso e phethiloe, lebokose la molaetsa le tla hlaha le reng e phethiloe ka katleho.
5. Mookameli o tla iqalisa bocha ebe o qala ho sebelisa sesebelisoa se secha sa firmware hang-hang.

Haeba ho na le ho hong ho phoso ka firmware e ntlafalitsoeng, pheta ts'ebetso hape haeba e ntse e bonahala ts'ebetsong ea tlhophiso. Ho seng joalo, sheba ho rarolla mathata ho Karolo ea 9 bakeng sa lintlha tse ling.

7.2 - Ho etsa Ntlafatso ea Firmware ea ho hlaphoheloa
On the rare occasion that the controller encounters an error with its firmware, a recovery firmware update can be performed. This may be necessary if the firmware update process in  Section 7.1 fails.

1. Fokotsa selaoli 'me u hatelle konopo ea "Bootloader".
2. Kenya matla. Maemo le li-LED tsa matla li lokela ho benya ka mokhoa o mong ho bontša hore molaoli o maemong a bootloader. E se e loketse ntlafatso ea firmware.
   Molaoli o tla lula a le atereseng ea IP ea 192.168.0.50 ka mokhoa ona, kahoo o tlameha ho etsa bonnete ba hore PC ea hau e tsosolosang e ho marang-rang a marang-rang a aterese ea IP (mohlala 192.168.0.10).
3. U sebelisa Mothusi oa Advatek, tlanya ho batla ka fensetere e ka sehloohong 'me u lokela ho bona molaoli a hlaha ka "Bootloader" kholomong ea firmware. Ho tobetsa habeli ho eona ho tla hlahisa file sheba fensetere joalokaha ho bontšitsoe setšoantšong sa 9 ka holimo.
4. Tobetsa ho sheba ho fumana firmware file.
5. Tobetsa konopo ea update. Ntlafatso e tla nka metsotsoana e 5 feela, 'me lebokose la molaetsa le tla hlaha hang ha ntlafatso e phethiloe.
6. Hona joale molaoli o lokela ho sebetsa le firmware e ncha.

Litlhaloso

8.1 - Litlhaloso tsa Ts'ebetso
Tafole e ka tlase e totobatsa maemo a ts'ebetso a khothaletsoang bakeng sa molaoli oa PixLite 4 Mk2.

Paramethara	Boleng/Range	Diyuniti
E khothalelitsoeng Moqtage Range	5-12	V DC
Absolute Max Voltage1	24	V DC
Boemo ba Hona joale	30	A
Tšebeliso e phahameng ea hona joale ea Logic @ 5V	130	mA
Fene Output Max Matla	15	W
Thempereichara e khothalelitsoeng Ambient2	-20 ho ea ho +50	°C
Absolute Maximum Mocheso oa Likarolo tsa PCB	-40 ho ea ho +80	°C
Boholo ba Hona Joale Ka Pixel Output	7.5	A

1. Active cooling is highly recommended.
2. Tekanyo e sisintsweng feela, dithempereichara tsa karolo di tlameha ho bolokwa ka hara maemo a tsona a phahameng ka ho fetesisa. Hoa khothaletsoa ho beha leihlo mocheso oa karolo ka software ea Advatek Assistant.

8.2 - Litlhaloso tsa Mechini
Litekanyo tsa boto ea taolo le libaka tsa likoti tsohle tse ntseng li hola li bonts'itsoe ho Setšoantšo sa 10 ka tlase.
There are 4 x 4mm mounting holes.

Ho batle phoso

Ka kakaretso, ho rarolla mathata ho hloka ho sheba li-LED ho boto ea taolo.
9.1 - Likhoutu tsa LED
Ka kopo, sheba tafole e ka tlase bakeng sa likhoutu tsa maemo bakeng sa boemo ba onboard le li-LED tsa motlakase.

Boemo ba LED (Bokhubelu)	Matla a LED (Tala)	Boemo
Ho benya	Tiileng	Ts'ebetso e tloaelehileng, Sesebelisoa sa mantlha se sebetsa hantle
Ho benya butle	Tiileng	Mokhoa oa teko o sebetsa
Ho benya mmoho	Ho benya mmoho	E batla aterese ea IP (DHCP Mode)
Tiileng	Tiileng	Sesebelisoa sa mantlha ha se sebetse
E tima	Tiileng	Sesebelisoa sa mantlha ha se sebetse
Tiileng	E tima	Sesebelisoa sa mantlha ha se sebetse
Ho benya ho hong	Ho benya ho hong	Mokhoa oa Bootloader
E tima	E tima	Ha ho matla

Ka kopo, sheba tafole e ka tlase bakeng sa likhoutu tsa maemo bakeng sa li-LED tsa boemo ba jack Ethernet.

Link LED (Tala)	LED ya data (Yellow)	Boemo
Tiileng	Ho benya	E hokahane hantle, e amohela data
Tiileng	E tima	E hokahane hantle, ha ho na data
E tima	E tima	Ha ho sehokelo se thehiloeng

9.2 - Ha ho li-LED tsa Matla / Boemo
Netefatsa hore motlakase oa hau o fana ka molumo o nepahetsengtage ho latela Karolo ea 4.1. Ho feta moo, etsa bonnete ba hore e ka fana ka hona joale e lekaneng ho khantša mabone a hoketsoeng. U lokela hape ho leka ho hakolla tlhahiso ea pixel s 'me u bone hore na molaoli o tla bula. Haeba matla a fanoeng a nepahetse, leka ho etsa ntlafatso ea firmware ho latela Karolo ea 7.2.
9.3 - Ha ho Taolo ea Pixel
Sheba hore na mofuta o nepahetseng oa pixel IC o hlophisitsoe . Hape sheba lithapo tsa 'mele le pinout ea pixels, hammoho le li-fuse tse hlahisoang.
9.4 – Litaba tse ling
Lekola likhoutu tsa LED ho latela Karolo ea 9.1. Haeba sesebediswa se ntse se hloleha ho sebetsa ka moo o neng o lebelletse, etsa hore feme e seta botjha ho sesebediswa ho ya ka Karolo 9.5 e ka tlase. Bakeng sa tlhaiso-leseling ea morao-rao, le likeletso tsa indasteri, o ka sheba litataiso tsa rona tsa Marang-rang mona:
www.advateklighting.com/blog/guides
U tla fumana leseli mabapi le taolo le tlhophiso ea sesebelisoa ho Tataiso ea Litlhophiso ea PixLite: www.advateklighting.com/downloads/user-manuals/pixlite-configuration-guide
Bakeng sa lipotso tse ling, o ka ikopanya le sehlopha sa rona sa tšehetso sehokelong se ka tlase: www.advateklighting.com/contact
support@advateklighting.com

9.5 - Khutlisa ho Fektheri e sa Feleng
Ho seta botjha ho li-setting tsa eona tsa feme, etsa se latelang:

1. Fokotsa molaoli.
2. Tšoara konopo ea "Factory IP" LE konopo ea "Bootloader" hammoho.
3. Matlafatsa molaoli.
4. Emela hore li-LED ka bobeli li bonese hammoho.
5. Tlosa likonopo ka bobeli 'me u theohe.
6. Matlafatsa molaoli. Hona joale e tla ba le tlhophiso ea kamehla ea feme.

Boithorollo

Haeba o hloka tšehetso kapa tiisetso, ka kopo sheba Karolo ea 9.4 bakeng sa tlhahisoleseling mabapi le ho theha tekete ea tšehetso. U tlameha ho fuoa tumello ea ho khutlisa ke basebetsi ba tšehetso ea Advatek pele u khutlisetsa sehlahisoa leha e le sefe.
Selaoli sa PixLite 4 Mk2 se fanoe ka waranti e lekanyelitsoeng ea lilemo tse 3 le tiiso ea tokiso/e ncha. Ka kopo bona lipehelo le lipehelo ho rona websaete bakeng sa tlhaiso-leseling e batsi.
Art-Net™ E entsoe ke le Copyright Artistic License Holdings Ltd.
Sehlahisoa sena se entsoe ke:
Advatek Lighting Pty Ltd
U1, 3-5 Gilda Court
Mulgrave, 3170
VIC, AUSTRALIA

www.advateklighting.com
Buka ea mosebelisi ea PixLite 4 Mk2 V20250606

Litokomane / Lisebelisoa

ADVATEK PixLite 4 Mk2 Pixel Controller [pdf] Bukana ea Mosebelisi PixLite 4 Mk2, PixLite 4 Mk2 Pixel Controller, PixLite 4 Mk2, Pixel Controller, Controller

Litšupiso

• Bukana ea Mosebelisi