PixLite 4 Mk2 Tusi Taiala
Meafaigaluega Rev 1.0

Folasaga

This is the user manual for the PixLite 4 Mk2 pixel controller , hardware version 1.0. The PixLite 4 Mk2 controllers convert E1.31 (sACN) or Art-Net protocols from a lighting console, media server or computer lighting software into various pixel LED protocols.
O le PixLite 4 Mk2 o loʻo faʻaalia ai se gaosiga gafatia e oʻo atu i le 24 universes multicast / unicast E1.31 poʻo Art-Net data. E maua ai foʻi se faʻaopoopoga 1 atulaulau o faʻamaumauga i luga o le 1 DMX512, faʻaogaina mai le Ethernet protocol tutusa, e aumaia ai le aofaʻi atoa o universes e oʻo atu i le 25. O lenei, faʻatasi ma se faʻapipiʻi faʻapitoa ma faigofie-e faʻaogaina polokalama faʻatulagaina, e avea ai le PixLite 4 Mk2 ma filifiliga sili mo lau faʻamalamalamaga pika.
O lenei tusi lesona o loʻo aofia ai vaega faʻaletino o le PixLite 4 Mk2 pule ma ona laasaga faʻatulagaina naʻo. E mafai ona maua fa'amatalaga au'ili'ili e uiga i ana filifiliga i le 'PixLite Configuration Guide'. O isi tusi lesona ma le PixLite Configuration Guide e mafai ona la'u mai iinei: www.advateklighting.com/downloads

Fa'amatalaga Saogalemu

O le laupapa e sau e lafo i totonu o se ato anti-static ma o loʻo i ai le tele o vaega maaleale eletise i luga. E tatau ona mata'ituina faiga fa'afeagai talafeagai pe a tagofia le laupapa. Mo example, e le tatau ona e nofo i le pule i luga o le kapeta, ma e tatau ona e aloese mai le pa'i atu i vaega i luga o le pule e le tatau ai.

Fa'apipi'i

4.1 – Tuuina Atu Malosiaga
Malosiaga i le pule ma galuega faatino e fa'aogaina e ala i le fa'afeso'ota'i fa'amau fa'amau, o lo'o i le pito agavale o le laupapa, e pei ona fa'aalia i le Ata 1 i lalo. O loʻo faʻamaonia manino i luga o le PCB ma le polarity.
Le voltage can be anywhere between 5V and 12Vdc . The controller will operate up to 24Vdc, however attention should be paid to cooling the controller when operating above 12V.
Fa'aaliga: O le matafaioi a le tagata fa'aoga le fa'amautinoa o le sapalai eletise na fa'aaogaina e fetaui ma le voltage o le pixel fixture o loʻo latou faʻaogaina ma e mafai ona tuʻuina atu le aofaʻi saʻo o le mana / taimi nei.
Ole aofa'i maualuga ole taimi nei ole 30A.

4.2 – Fuse Fa'aulu
O mea ta'itasi ta'itasi e puipuia e se fuse lau la'ititi. O le PixLite 4 Mk2 e sau ma fuse 5A e ala i le faaletonu. E mafai ona e fa'aogaina so'o se tau o fuse, e o'o atu ma aofia ai le 7.5A, fa'atatau i lau fa'aoga patino. O galuega faatino a tagata ta'ito'atasi e le tatau ona sili atu i le 7.5A ma le aofa'i ole taimi nei e le tatau ona sili atu ile 30A.

4.3 – Malosiaga Fa'atatau
E otometi lava ona fa'atulafonoina le mana fa'atatau mai le fa'aogaina o le eletise. Na'o le fa'afeso'ota'i o lau sapalai eletise DC e tusa ai ma fa'amatalaga o lo'o lisiina i le Vaega 8.1 i le fa'aoga eletise.
4.4 – Pulea Fa'amaumauga
E feso'ota'i fa'amatalaga Ethernet e ala i se uaea feso'ota'iga masani i totonu o le RJ45 Ethernet jack o lo'o i le itu taumatau o le iunite. E lagolagoina e le pule le Streaming ACN (sACN / E1.31) poʻo faʻamatalaga Art-Net.
4.5 – Feso'ota'i Pixel LEDs
Ole numera o pika a PixLite 4 Mk2 e mafai ona faʻauluina o loʻo faʻaalia ile Ata 2 i lalo.

The pixel lights are connected directly via the 4 pluggable screw terminal connectors on the board.
Each connector is labelled with its output channel number (1- 4 ) and pin 1 is also clearly marked (There is also a pin- out for the connectors clearly marked on the PCB silk- screen for quick reference) . Simply wire your lights into each screw terminal and then plug them into the mating sockets.
Lapataiga: E taua tele le aua le pu'upu'u + i luga o le uati po'o laina fa'amaumauga pe a fa'aoga pika e sili atu i le 5V. Ona o lenei mea sese e mafai ona tupu, ua faʻaopoopoina faʻasalalauga faʻapitoa e puipuia ai soʻo se faʻaleagaina o le PPU autu. Ae peitaʻi, afai e faʻaleagaina le vaega paʻu oloa ona o le pupuu, ua mamanuina mo le faigofie ona sui e le tagata faʻaoga. O le vaega e taugofie e sui ma Advatek lagolago o le a taʻitaʻia oe i le faagasologa pe afai e te talitonu na tupu lenei mea. Manatua e mafai foi ona tupu lenei mea mai le le lelei o le susu pe a timu pupuu le maualuga voltage i luga o se tasi o na uaea i lau pixels/wiring.
Ole umi ole uaea ile va ole gaioiga ma le pika muamua e le tatau ona sili atu ile 15m.
O le ata 3 o lo'o fa'aalia ai le pine-out o feso'ota'iga pika.

4.6 – Fa'alautele Faiga
If your pixels only use a single data line, you may optionally activate expanded mode on the controller. If using the PixLite 4 Mk2 with a PixLite T16X- S Mk3, expanded mode must be used, meaning that pixels can only use a single data line. The clock pins are not connected, as per the pintout below. In expanded mode, the clock signals are re-purposed for data signals instead. This means the controller effectively has twice as many pixel outputs (8), but half as many pixels per output can be run.
E mafai ona fesoasoani le fa'alauteleina o le faiga e fa'aopoopo le fetuutuuna'i i totonu o se faiga ona o lo'o tele atu galuega e maua. E mafai fo'i ona fesoasoani e ala i le fa'asalalauina o le aofa'i o pika fa'atonutonu i le tele o galuega, lea e mafai ona fesoasoani e maua ai fua fa'afou maualuga pe a le fa'aogaina pika uati.
O le pine mo le faʻalauteleina o loʻo faʻaalia i le Ata 4 i lalo.

Feso'ota'iga Feso'ota'iga

5.1 – Fa'atulagaina o Fesootaiga

Ata 5 o lo'o fa'aalia ai se fa'asologa o feso'ota'iga masani mo le PixLite 4 Mk2 pule(s) LAN. O fa'apipi'i e fa'aaoga ai le multicast sACN o le a fa'amanuiaina mai le fa'aogaina o le IGMP Snooping fa'aogaina mea faigaluega feso'ota'iga pe a tele atu universes multicast i luga ole feso'ota'iga nai lo so'o se PixLite fa'aoga. Afai e sili atu nai lo 96 universes multicast sACN i luga o le fesoʻotaʻiga ona faʻatagaina lea o le IGMP Snooping.
O le i ai o se router i luga o le upega tafailagi e le faʻamalosia ae e aoga mo le faʻatautaia o tuatusi IP ma le DHCP (silasila i le Vaega 5.2.1). Pe a IGMP snooping, e ono manaʻomia foi se router (faʻalagolago i lau faʻaogaina o fesoʻotaʻiga).

I totonu o se faʻapipiʻi faʻapipiʻi e tasi, atonu e sili atu le faʻafesoʻotaʻi saʻo le pule i le masini talimalo, e pei ona faʻaalia i le Ata 6. E le manaʻomia se cable crossover i lenei tulaga, ae mafai ona faʻaaogaina pe a manaʻomia.
E mafai ona tu'u sa'o le pule i so'o se LAN muamua e pei o lau fa'asalalauga, fale po'o le ofisa feso'otaiga, o ata o lo'o i luga e na'o le tu'uina atu e peiamples.

5.2 – Tulaga IP
5.2.1 – Fa'aaogāina ose Router
O lo'o i ai i totonu o routers se DHCP server - o lona uiga latou te ta'u atu i se masini fa'apipi'i i totonu ia i latou le tuatusi IP e fa'aoga, pe a fesiligia.
O le DHCP e mafai lava ona faʻaogaina i luga o le PixLite controller ina ia mafai ona faʻafesoʻotaʻi vave i soʻo se fesoʻotaʻiga o loʻo iai ma se router. Ae ui i lea, atonu e te manaʻo e tuʻuina atu se tuatusi IP faʻamaonia pe a uma ona faʻatūina fesoʻotaʻiga e ala i le Advatek Fesoasoani. Afai o le pule o loʻo i le DHCP mode ma e leʻi tuʻuina atu se tuatusi IP e se server DHCP, o le a faʻagata pe a maeʻa sina taimi puupuu (pe tusa ma le 30 sekone) ma le faʻaogaina i se IP tumau o le '192.168.0.50'.
Afai e mafai ona fa'aogaina le DHCP, o le a moli fa'atasi uma le tulaga ma le eletise se'ia o'o ina maua e le pule se tuatusi IP po'o le taimi e alu ai i lona IP fa'aletonu. A maeʻa lenei mea, o le a tumau le malosi o le LED ma o le a moli le tulaga o le LED, e faʻaalia ai o loʻo i totonu o le taʻavale ma sauni mo le faʻaoga.
Afai e tuʻuina atu se tuatusi IP faʻapitoa i le pule, ona malosi lea o le LED eletise mai le malosi i luga.

5.2.2 – Fa'aaogāina o se Suiga/Sa'o
Atonu e tatau ona faʻafesoʻotaʻi le pule i se fesoʻotaʻiga e aunoa ma se DHCP server poʻo saʻo foi i le masini talimalo nai lo le faʻaaogaina o se router. I lenei tulaga (mo le taimi muamua faʻatulagaina) e te manaʻomia le faʻamautinoaina o le fesoʻotaʻiga fesoʻotaʻiga o lau komepiuta o loʻo seti i le IP laina o le a le mafai e le pule (pule faʻaletonu i le 192.168.0.50). O lona uiga o le IP a lau PC e tatau ona 192.168.0.xxx lea o le xxx o se mea i le va o le 1 ma le 254, e ese mai le 50. O le subnet mask i lau PC e tatau ona seti i le 255.255.255.0.
Fa'aaliga: O le Advatek Assistant software o le a otometi lava ona iloa pe afai e fesoʻotaʻi se pule i le fesoʻotaʻiga, tusa lava pe i fafo atu o le tuatusi IP a le adapter. O le a fa'aosofia oe e sui tulaga IP pe a maua lenei tulaga.
O le taimi lava e mafai ai ona e mauaina ma le manuia le pule i le Advatek Fesoasoani, matou te fautuaina le setiina o le pule i se tuatusi IP tulaga ese nai lo le faaletonu.
O le ata 7 o loʻo faʻaalia ai se faʻamalama o fesoʻotaʻiga komepiuta masani e fesoʻotaʻi ma se PixLite 4 Mk2 pule mo le taimi muamua e aunoa ma se router.

5.2.3 – Forcing the Default IP Address
Afai e galo ia te oe le IP o se pule ma e le mafai ona e vaʻaia i le Advatek Fesoasoani, e mafai ona faʻamalosi i lona IP le aoga. O se faiga faigofie e mafai ona faʻaaogaina i luga o le eletise:

1. Taofi i lalo le "Factory IP" button i luga o le PCB ma faʻamalosi le pule
2. A mae'a ni nai sekone tatala le faamau. Ole tuatusi IP ole pule ole a 192.168.0.50.

E tatau ona mafai nei ona e setiina le fesoʻotaʻiga fesoʻotaʻiga a lau PC e suʻe ai le pule i lenei IP ma suia le tulaga IP i se tuatusi IP e manaʻomia.

Fa'agaioiga

6.1 – Amataina
I luga o le faʻaogaina o le mana, o le a vave ona amata e le pule le tuʻuina atu o faʻamatalaga i pixels, faʻatonu pixels e tape. Afai e leai ni fa'amatalaga o lo'o lafo i le pule, o le a tape pea pixels se'ia maua fa'amaumauga fa'amaonia. I le taimi masani, o le a tumau pea le moli eletise lanumeamata ma o le LED tulaga mumu o le a moli e taʻu mai ai o loʻo tamoe le pule ma faʻauluina soʻo se faʻamatalaga Ethernet maua i pika.

6.2 – Auina atu Faamatalaga
O faʻamatalaga faʻapipiʻi e lafoina mai le PC / server / faʻamafanafana moli i le pule e ala i Ethernet e faʻaaoga ai le "DMX over IP" protocol e pei ole sACN (E1.31) poʻo Art-Net.
Afai e leai ni fa'amatalaga o lo'o maua mai mo ni nai sekone, e otometi lava le tapeina o pika se'i vagana ua fa'aletonu lena filifiliga i lau fa'atulagaga. Afai e le mafai ona pulea pixels, ia mautinoa ua e filifilia le ituaiga pika IC saʻo i le Advatek Fesoasoani i lalo o le 'LEDs' tab.

6.3 – Galuega Fa'atino
6.3.1 – Pixel Outputs
O galuega ta'itasi e 4 i luga ole PixLite 4 Mk2 e mafai ona fa'aulu i luga ole 6 universes o fa'amaumauga. O lenei mea e mafai ai ona oʻo atu i le 24 universes e tuliesea mai le tasi pule.
Ole fua ole fa'afouina ole pixels ole a fa'alagolago ile fa'agaoioiga ole fa'aogaina ole ituaiga pu'upu'u pika.
Higher speed pixels will result in higher refresh rates. Pixels with no clock line will have a relatively low refresh rate when a significant number of pixels are used on a single output. Advatek recommends the use of clocked pixels whenever using a large number of sequential pixels on any output. Typically, the refresh rate can vary from 20 fps at the low end on data only pixels and up to 100+ fps at the higher end.

6.3.2 - DMX512 Faʻamatalaga
O le PixLite 4 Mk2 e maua ai le 1 DMX512 mea e mafai ona fa'aogaina e feso'ota'iga fa'amau fa'amau. O le vaega o meafaigaluega o loʻo faʻaogaina ai le DMX512 protocol o le RS485 eletise fesoʻotaʻiga tulaga. Ole faiga lea ole felauaiga ese'ese e aofia ai le lua-uaea fa'ailoga fa'ailoga fa'ailoga ma se feso'ota'iga eleele. O le mea e sili ona lelei e tatau ona fa'afeso'ota'i fa'ailoga eseese i se uaea fa'alua mimi. O feso'ota'iga D+, D- ma le eleele o lo'o fa'ailoga manino i luga ole PCB mo fa'amau fa'amau fa'amau.
O lenei gaioiga e galue e pei o se DMX512 universe output, ma le lelei e tuʻuina atu i le tagata faʻaoga se E1.31 poʻo Art-Net i le 1 x DMX512 alalaupapa (faʻaopoopo i galuega masani pika).
Fa'aaliga: E le'o tu'u'ese'ese fa'aeletise galuega fa'atino a le DMX.

6.3.3 – Fa'atupu Fa'aili
The controller features an auxiliary fan output that can power an external fan (s) for cooling the enclosure that the controller is mounted in, as shown in Figure 8 below. This feature is useful in order to keep the temperature regulated when you mount the  controller and a high wattage tu'u fa'atasi le paoa i totonu o se tama'i avanoa pupuni.

Le galuega faatino voltagu o le ili galuega e tutusa ma le voltagu. O lea la, ia fa'aola se ili 12V mo example, e te manaʻomia le faʻaaogaina o le vol. 12Vtagu. E mafai ona tu'uina atu i le 15W le malosi fa'aauau pea ma o lo'o pulea e le PWM. O le gaosiga e puipuia e se fuse la'ititi 3A.
Afai o loʻo tamoe le pule i luga aʻe o le 12V, o le faʻaaogaina o lenei vaega e matua fautuaina lava.
Ole faʻatinoga faʻavae e faʻapea: I le Advatek Fesoasoani, e mafai e le tagata faʻaoga ona seti se vevela faʻamoemoe e le sili atu le pa puipui. O le a otometi lava ona fetu'una'i e le pule le saoasaoa o le ili e fa'atatau i le vevela o lo'o i ai nei e pei ona fuaina e le masini fa'apipi'i vevela i luga o le laupapa.
Mo example, afai e seti le vevela i le 30°C i se taimi a o leʻi oo i lena vevela, o le a faʻapipiʻi e le pule le ili ma lemu r.amp i luga le saoasaoa seia oʻo i le 100% pe a manaʻomia, i se taumafaiga e faʻamautu le vevela pe i lalo ole 30°C. A fa'aitiitia le vevela o le a fa'agesegese le ili. O le a taumafai le pule e fa'atumauina le vevela i lalo ole tulaga fa'atulagaina. Afai o le vevela ua iloa e oʻo atu i le vevela seti, o le a faʻaalia le ili i luga ole 100% ile taimi lea.

6.4 – Mamanu Su'ega Meafaigaluega
The controller features a built-in test pattern to assist in troubleshooting during an installation. To put the controller into this mode, press and hold the ‘Factory IP ’ button for 3 seconds (after the controller is already running) or turn it on remotely from the  “Test” tab in the Advatek Assistant.
The controller will then enter the test pattern mode, where different test patterns are available as described in the table below. The pattern will display the test pattern on all pixels on each of the pixel outputs and any enabled DMX512 outputs simultaneously . Pressing the ‘ Factory IP ‘ button while in test mode will move through each of the patterns successively in one continuous loop.

Su'ega	Fa'agaioiga
	O le a otometi lava ona taamilo i le lanu mumu, lanumeamata, lanumoana ma le paʻepaʻe i taimi tumau. O le oomiina o le faamau e alu i le isi faiga.
	Mūmū Malosi
	Malosi lanumeamata
	Blue Malosi
	Pa'epa'e Malosi
	Outputs will slowly move through a full continuous colour fade. Pressing the button will loop back to the original colour cycle test mode.

Ina ia alu ese mai le su'ega faiga oomi ma taofi le 'Factory IP' faamau i lalo mo le 3 sekone ona tatala lea.
The hardware test requires that the pixel driver chip type and number of pixels per output are set correctly in the Advatek Assistant . In this way you can test if that part of your configuration is correct and isolate other possible problems with the incoming Ethernet data side.

Faʻalauiloa Firmware

E mafai e le pule ona fa'afouina lana firmware (polokalame fou). E masani ona faia se fa'afouga e fa'aleleia ai fa'afitauli po'o le fa'aopoopoina o foliga fou.
Ina ia faia se faʻafouga firmware, ia mautinoa o loʻo i ai lau PixLite 4 Mk2 pule e fesoʻotaʻi i le LAN network e pei o le Vaega 5.1.
O loʻo maua le firmware fou mai le Advatek webnofoaga i le sootaga lea: www.advateklighting.com/downloads
Le download file o le a teuina i se ".zip", lea e tatau ona aveese mai. Le ".hex" file o le file e manaʻomia e le pule.

7.1 – Fa'atinoina o se Fa'afouga Fa'ata'atia

1. Tatala le Advatek Fesoasoani. Kiliki "Su'esu'e" ma o le taimi lava e aliali mai ai le pule mana'omia i le faamalama autu, faalua ona kiliki i luga.
2. O le a aliali mai se fa'amalama fa'atulagaina. Kiliki i luga o le "Misc" tab ona suʻe lea o le "Update Firmware" button ma kiliki i luga. O le a aliali mai se faʻamalama "faʻafouina firmware", e pei ona faʻaalia i le Ata 9 i lalo. Kiliki "su'esu'e" e su'e le firmware file e te mana'o e fa'aoga.
3. Kiliki i luga o le "update" button.
4. A mae'a loa le fa'afouga, o le a oso a'e se pusa fe'au fai mai ua mae'a manuia.
5. Ole pule ole a otometi lava ona toe faʻafou ia lava ona amata loa lea ona faʻagaoioia le polokalama firmware fou.

Afai ei ai se mea sese i le firmware fou, toe fai le faagasologa pe afai o loʻo vaaia pea i le faʻaogaina o le faʻaogaina. A leai, va'ai ile fa'afitauli ile Vaega 9 mo nisi fa'amatalaga.

7.2 – Faia o le Toe Fa'afouina Firmware Update
On the rare occasion that the controller encounters an error with its firmware, a recovery firmware update can be performed. This may be necessary if the firmware update process in  Section 7.1 fails.

1. Malo i lalo le pule ma taofi i lalo le "Bootloader" faamau.
2. Fa'aaoga le mana. O le tulaga ma le malosi o le LED e tatau ona emo fa'asolosolo e ta'u mai ai o lo'o i totonu le fa'atonu o lo'o i totonu o le faiga fa'a-bootloader. Ua sauni nei mo se fa'afouga firmware.
   Ole pule ole a fa'aletonu ile tuatusi IP ole 192.168.0.50 i lenei faiga, o lea e tatau ai ona e mautinoa o lau PC o loʻo faʻatinoina le toe faʻaleleia o loʻo i luga o se fesoʻotaʻiga ile tuatusi tuatusi tutusa ma lenei tuatusi IP (eg 192.168.0.10).
3. Faʻaaogaina le Advatek Fesoasoani, kiliki suʻesuʻe i le faamalama autu ma e tatau ona e vaʻai i le pule o loʻo faʻaalia ma le "Bootloader" i le koluma firmware. O le kiliki faalua i luga o le a maua ai le file su'e le faamalama e pei ona faaalia i le Ata 9 i luga.
4. Kiliki su'esu'e e su'e le firmware file.
5. Kiliki ile fa'afou fa'amau. O le fa'afouga e na'o le 5 sekone, ma o le a oso a'e se pusa fe'au pe a mae'a le fa'afouga.
6. Ua tatau nei ona fa'agaoioi le pule fa'atasi ma le firmware fou.

Fa'amatalaga

8.1 – Fa'amatalaga Fa'atino
O le laulau o loʻo i lalo o loʻo faʻamaoti mai ai tulaga faʻatonuga mo le PixLite 4 Mk2 pule.

Parameter	Taua/Vaega	Iunite
Fautuaina Voltagu lautele	5-12	V DC
Absolute Max Voltage1	24	V DC
Max Nei	30	A
Max Logic Fa'atauga i le taimi nei @ 5V	130	mA
Fa'aili Avanoa Max Malosi	15	W
Recommended Ambient Temperature2	-20 i le +50	°C
Maua'i Maualuluga vevela o vaega PCB	-40 i le +80	°C
Tulaga maualuga i le taimi nei ile Pixel Output	7.5	A

1. Active cooling is highly recommended.
2. Na'o le tapula'a fautuaina, o le vevela o vaega e tatau ona tausia i totonu o latou fa'atonuga aupito maualuga. E fautuaina le mataituina o le vevela o vaega ma le Advatek Assistant software.

8.2 – Fa'amatalaga Fa'ainisinia
Ole fua ole laupapa fa'atonu ma nofoaga o pu fa'apipi'i uma o lo'o fa'aalia ile Ata 10 i lalo.
There are 4 x 4mm mounting holes.

Fa'afitauli

E masani lava, o faʻafitauli e manaʻomia le vaʻavaʻai i LED i luga o le laupapa pule.
9.1 – Fa'ailoga LED
Fa'amolemole va'ai le laulau o lo'o i lalo mo fa'ailoga tulaga mo le tulaga o lo'o i luga ole va'a ma moli eletise.

Status LED (Red)	Power LED (Green)	Tulaga
Emo	Malosi	Fa'agaioiga masani, Talosaga autu o lo'o lelei
Emo lemu	Malosi	Fa'ata'ita'iga faiga
Emo fa'atasi	Emo fa'atasi	Looking for IP address (DHCP Mode)
Malosi	Malosi	Le fa'aoga autu e le o ta'avale
Tape	Malosi	Le fa'aoga autu e le o ta'avale
Malosi	Tape	Le fa'aoga autu e le o ta'avale
Su'i emo	Su'i emo	Faiga fa'apipi'i
Tape	Tape	Leai se mana

Fa'amolemole va'ai i le laulau o lo'o i lalo mo fa'ailoga tulaga mo fa'amalama tulaga o le Ethernet jack.

So'oga LED (Munumea)	Fa'amatalaga LED (Samasama)	Tulaga
Malosi	Emo	Feso'ota'i lelei, maua fa'amaumauga
Malosi	Tape	Feso'ota'i lelei, leai se fa'amatalaga
Tape	Tape	Leai se so'oga fa'amauina

9.2 - Leai se Power / Tulaga LED
Ia mautinoa o lo'o sa'o le sapalai o lau paoa voltage as per Section 4.1. Additionally, ensure that it can supply enough current to drive the lights that are connected. You should also try disconnecting the pixel output s and see if the controller then turns on. If the supplied power is correct, try performing a recovery firmware update as per Section 7.2.
9.3 - Leai se Pulea Pixel
Siaki pe sa'o le ituaiga pixel IC ua fa'atulaga . Siaki foi le uaea faaletino ma le pine o pixels, faapea foi ma fuse.
9.4 – Isi Mataupu
Siaki le faʻailoga o le LED e tusa ai ma le Vaega 9.1. Afai e le mafai lava e le masini ona faʻatino e pei ona faʻamoemoeina, fai se toe setiina ole fale gaosimea ile masini e pei ole Vaega 9.5 i lalo. Mo faʻamatalaga lata mai, ma fautuaga faʻapisinisi, e mafai ona e vaʻai ia matou taʻiala i luga ole laiga iinei:
www.advateklighting.com/blog/guides
O le ae mauaina faʻamatalaga i le pulega ma le faʻatulagaina o le masini i le PixLite Configuration Guide: www.advateklighting.com/downloads/user-manuals/pixlite-configuration-guide
Mo so'o se isi fesili, e mafai ona e fa'afeso'ota'i le matou 'au lagolago ile so'otaga i lalo: www.advateklighting.com/contact
support@advateklighting.com

9.5 – Toe Seti i Faiga Falegaosimea
Ina ia toe setiina le pule i ona tulaga faaletonu falegaosimea, fai mea nei:

1. Malo i lalo le pule.
2. Taofi i lalo le "Factory IP" button MA le "Bootloader" button faʻatasi.
3. Malosi le pule.
4. Fa'atali mo LED uma e 'emo fa'atasi.
5. Tatala faamau uma ma le malosi i lalo.
6. Malosi le pule. O le a iai nei le fa'atonuga o le fale gaosimea.

Fa'ailoga

Afai e te mana'omia le lagolago po'o le saisai, fa'amolemole fa'afeso'ota'i le Vaega 9.4 mo fa'amatalaga ile faia o se pepa lagolago. E tatau ona tu'uina atu ia te oe se fa'atagaga toe fa'afo'i mai e le aufaigaluega lagolago a Advatek a'o le'i toe fa'afo'i so'o se oloa.
O le PixLite 4 Mk2 pule o loʻo tuʻuina atu ma se faʻamaonia faʻatapulaʻa 3-tausaga ma se faʻamaoniga toe faʻaleleia / sui. Fa'amolemole va'ai i tu'utu'uga ma aiaiga ile matou web'upega tafaʻilagi mo nisi faʻamatalaga.
Art-Net™ Fa'atulagaina e ma Puletaofia Artistic License Holdings Ltd.
O lenei oloa na gaosia e:
Advatek Lighting Pty Ltd
U1, 3-5 Gilda Court
Mulgrave, 3170
VIC, AUSTRALIA

www.advateklighting.com
PixLite 4 Mk2 Tusi Taiala V20250606

Pepa / Punaoa

ADVATEK PixLite 4 Mk2 Pixel Pule [pdf] Tusi Taiala PixLite 4 Mk2, PixLite 4 Mk2 Pixel Pule, PixLite 4 Mk2, Pixel Pule, Pule

Fa'asinomaga

• Tusi Taiala