LS ELECTRIC XGT Dnet Programmable Logic Controller
Tlhahisoleseding ya Sehlahiswa
Sehlahisoa ke Programmable Logic Controller ka nomoro ea mohlala C/N: 10310000500. E sebelisa theknoloji ea XGT Dnet mme e na le nomoro ea mohlala ea XGL-DMEB. PLC e ka hlophisoa bakeng sa mesebetsi e fapaneng mme e loketse lits'ebetso tsa boiketsetso tsa indasteri. Sehlahisoa se na le li-terminals tse peli tsa ho kenya / lihlahisoa 'me se tšehetsa mefuta e mengata ea liprothokholo.
Sengoliloeng se tsoang bukeng ea mosebelisi se fana ka lintlha tse ling mabapi le sehlahisoa:
- Mola oa 1: E supa lebitso le mohlala oa sehlahisoa.
- Mola oa 2: E bonts'a tlhophiso ea ho kenya / sephetho sa PLC.
- Mola oa 3: E supa boleng ba 55 bakeng sa theminale ea 1 ea input/output.
- Mola oa 4: E supa boleng ba -2570 bakeng sa terminal 2 ea input/output.
- Mola oa 5: E supa boleng ba 595%RH bakeng sa theminale ea 3 le ea 4.
Litaelo tsa Tšebeliso ea Sehlahisoa
Ho sebelisa Programmable Logic Controller, latela mehato e ka tlase:
- Hokela PLC ho phepelo ea motlakase.
- Hokela lisebelisoa tsa ho kenya / ho tsoa ho li-terminals tse nepahetseng ho latela tlhophiso e boletsoeng bukeng ea mosebelisi.
- Rulahanya PLC u sebelisa software e loketseng le lipuo tsa lenaneo ho latela litlhoko tsa kopo ea hau.
- Lekola ts'ebetso ea PLC ka ho tsamaisa litaelo tse hlophisitsoeng le ho ela hloko matšoao a ho kenya kapa ho tsoa.
- Etsa liphetoho tse hlokahalang lenaneong kapa likhokahano tsa hardware ho latela liphetho tse lakatsehang.
Sheba bukana ea mosebedisi bakeng sa tlhahisoleseding e felletseng mabapi le ho etsa mananeo le ho rarolla mathata.fetola ntle le tsebiso ka lebaka la ntshetsopele le ntlafatso e tswelang pele ya sehlahiswa.
Tataiso ena ea ho kenya e fana ka tlhaiso-leseling e bonolo ea ts'ebetso kapa taolo ea PLC. Ka kopo bala ka hloko leqephe lena la data le libuka pele u sebelisa lihlahisoa. Haholo-holo bala litemoso ebe u tšoara lihlahisoa hantle.
Litlhokomelo tsa Tšireletso
- Moelelo oa lengolo la tlhokomeliso le tlhokomeliso
TLHOKOMELISO: e bontša boemo bo ka bang kotsi, boo, ha bo sa qojoe, bo ka bakang lefu kapa kotsi e mpe
TLHOKOMELO: e bonts'a boemo bo ka bang kotsi, boo, ha bo sa qojoe, bo ka bakang kotsi e nyane kapa e itekanetseng. E ka boela ea sebelisoa ho lemosa khahlanong le mekhoa e sa sireletsehang
TLHOKOMELO
- Se ke oa ikopanya le lits'oants'o ha motlakase o sebelisoa.
- Etsa bonnete ba hore ha ho na litaba tsa tšepe tse tsoang kantle ho naha.
- Se ke oa sebelisa betri (tefisa, harola, e otla, e khuts'oane, e sollang).
TLHOKOMELO
- Etsa bonnete ba hore u sheba rated voltage le tlhophiso ea terminal pele ho terata
- Ha o kenya lithapo, tiisa screw ea "terminal block" ka mefuta e boletsoeng ea torque
- Se ke oa kenya lintho tse tukang linthong tse tikolohong
- Se ke oa sebelisa PLC tikolohong ea ho thothomela ka kotloloho
- Ntle le basebeletsi ba litšebeletso tsa litsebi, u se ke ua qhaqha kapa ua lokisa kapa ua fetola sehlahisoa
- Sebelisa PLC tikolohong e kopanang le lintlha tse akaretsang tse fuperoeng ke database ena.
- Etsa bonnete ba hore mojaro o kantle ha o fete tekanyetso ea module ea tlhahiso.
- Ha u lahla PLC le betri, e tšoare joalo ka litšila tsa indasteri.
- Letšoao la I/O kapa mohala oa puisano o tla kengoa ka terata bonyane 100mm hole le leqhubu le phahamengtagthapo kapa mohala oa motlakase.
Tikoloho ya Tshebetso
Ho kenya, hlokomela maemo a ka tlase.
| Che | Ntho | Tlhaloso | Standard | ||||
| 1 | Mocheso oa tikoloho. | 0 ~ 55℃ | – | ||||
| 2 | Mocheso oa polokelo. | -25 ~ 70 ℃ | – | ||||
| 3 | Mongobo wa tikoloho | 5 ~ 95% RH, e sa lumellaneng | – | ||||
| 4 | Mongobo wa polokelo | 5 ~ 95% RH, e sa lumellaneng | – | ||||
|
5 |
Ho hanyetsana le Vibration |
Ho thothomela nako le nako | – | – | |||
| Khafetsa | Ho potlakisa | Amptsebo |
Tlhaloso: IEC 61131-2 |
||||
| 5≤f<8.4㎐ | – | 3.5 limilimithara | Ka makhetlo a 10 ka lehlakoreng le leng le le leng
bakeng sa X LE Z |
||||
| 8.4≤f≤150㎐ | 9.8㎨(1g) | – | |||||
| Ho thothomela ho sa feleng | |||||||
| Khafetsa | Khafetsa | Khafetsa | |||||
| 5≤f<8.4㎐ | – | 1.75 limilimithara | |||||
| 8.4≤f≤150㎐ | 4.9㎨(0.5g) | – | |||||
Sebetsa Tšehetso Software
Bakeng sa tlhophiso ea sistimi, mofuta o latelang oa hlokahala.
- XGI CPU: V3.9 kapa kaholimo
- XGK CPU: V4.5 kapa ka holimo
- XGR CPU: V2.6 kapa kaholimo
- XG5000 Software : V4.11 kapa ka holimo
Lisebelisoa le Litlhaloso tsa Cable
- Sheba Sehokelo sa DeviceNet se hokeletsoeng mojuleng
- Lekola bohanyetsi ba terminal bo hlahang lebokoseng
1) Khanyetso ea terminal: 121Ω, 1/4W, tumello 1% (2EA) - Ha o sebelisa mocha oa puisano oa DeviceNet, thapo ea DeviceNet e tla sebelisoa ho nahanoa ka sebaka sa puisano le lebelo.
| Karolelano | E teteaneng(sehlopha sa1) | E teteaneng(sehlopha sa2) | O mosesane(sehlopha sa2) | Ela hloko |
| Mofuta | 7897A | 3082A | 3084A | Moetsi: Belden |
| Mofuta oa Cable | Ratoa |
Trunk and Drop line e sebelisoa ka nako e le 'ngoe |
||
| Tšitiso(Ω) | 120 | |||
| Boemo ba mocheso(℃) | -20 ~ 75 | |||
| Max. hona joale e lumellehang(A) | 8 | 2.4 | ||
| Min. radius ea curvature (inch) | 4.4 | 4.6 | 2.75 | |
| Nomoro ea mohala oa mantlha | 5 lithapo | |||
Likarolo tsa Lebitso le boholo (mm)
- Ena ke karolo e ka pele ea Mojule. Sheba lebitso le leng le le leng ha o sebelisa sistimi. Ho fumana lintlha tse ling, sheba bukana ea mosebelisi.
Lintlha tsa LED
| LED | LED
Boemo |
Boemo | Tlhaloso ea LED |
| MATSHA | On | Tloaelehileng | Ho qala |
| E tima | Phoso | Ha phoso e bolaeang e etsahala | |
| I/F | panya | Tloaelehileng | Sehokelo se tloaelehileng le CPU |
| E tima | Phoso | Phoso ea Sehokelo le CPU | |
|
HS |
On | Tloaelehileng | HS Link boemo bo tloaelehileng ba ho sebetsa |
| panya | Ho leta | Nakong ea ho jarolla parameter ka sesebelisoa sa config Communicate e emisitsoe | |
| E tima | Phoso | HS Link e koetsoe
Ha phoso e bolaeang e etsahala ho HS Link |
|
|
D-RUN |
panya | Comm. Ema | Comm. Emisa (mojule oa Dnet I/F le mojule oa makhoba) |
| On | Nromal | Ts'ebetso e tloaelehileng (mojule ea Dnet I/F le module ea makhoba) | |
|
MNS |
E tima |
Matla Off | Dnet I/F module e fumaneha inthaneteng
-Ha e so qete tlhahlobo ea ID ea MAC e kopitsoang -e ka se be le matla |
|
Ho panya ha botala |
Ho leta |
Mojule oa Dnet I/F oa sebetsa ebile o inthaneteng, ha ho khokahano e thehiloeng
-Sesebelisoa se fetisitse tlhahlobo ea ID ea MAC empa ha e na khokahano e thehiloeng ho lisebelisoa tse ling |
|
| Botala
On |
Tloaelehileng | Ho phethiloe tlhophiso ea khokahano le e tloaelehileng
puisano. |
|
| Ho panya ha khubelu | Phoso | Haeba phoso e ka khutlisoa e etsahala
Khokahano ea I/O e maemong a ho fela |
|
|
Khubelu On |
Phoso e bolaeang | Dnet I/F module ha e khone ho fihlella marang-rang
-Bese e theoha ka lebaka la liphoso tse boima tsa CAN. - Duplicate MAC ID e fumanoe. |
Ho kenya / ho tlosa li-module
- Mona ho hlalosa mokhoa oa ho hokela module ka 'ngoe setsing kapa ho e tlosa.
- Ho kenya module
- Kenya projeke e tsitsitseng ea karolo e ka tlase ea PLC ka har'a mojule oa lesoba le tsitsitseng la base
- Tsamaisa karolo e ka holimo ea mojule ho lokisa botlaaseng, 'me ue lokele botlaaseng ka ho sebelisa sekoti se tsitsitseng sa module.
- Hula karolo e ka holimo ea mojule ho hlahloba hore na e kentsoe setsing ka botlalo.
- Ho tlosa mojule
- Lokolla li-screws tse tsitsitseng tsa karolo e ka holimo ea mojule ho tloha setsing
- Ka ho tobetsa hook, hula karolo e ka holimo ea mojule ho tloha karolong e ka tlaase ea mojule
- Ka ho phahamisetsa mojule holimo, tlosa lever ea mojule ho tloha lesobeng la ho lokisa
- Ho kenya module
Wiring
- Wiring bakeng sa puisano
- 5 pin sehokelo (bakeng sa khokahano ea kantle)
- 5 pin sehokelo (bakeng sa khokahano ea kantle)
| Letshwao | Mmala | Tshebeletso | 5 pin sehokelo |
| DC 24V (+) | Khubedu | VDC | |
| TLHOKOMELISO | Bosoeu | Letshwao | |
| Khala | Bare | Thebe | |
| KA_L | Boputsoa | Letshwao | |
| DC 24V (-) | Ntsho | GND |
Tiisetso
- Nako ea tiisetso: Likhoeli tse 18 ka mor'a letsatsi la tlhahiso.
- Sebaka sa Warranty: Waranti ea likhoeli tse 18 ea fumaneha ntle le:
- Mathata a bakoang ke boemo bo sa lokang, tikoloho kapa kalafo ntle le litaelo tsa LS ELECTRIC.
- Mathata a bakoang ke lisebelisoa tsa kantle
- Mathata a bakoang ke ho nchafatsa kapa ho lokisoa ho ipapisitsoe le boikhethelo ba mosebelisi.
- Mathata a bakoang ke tšebeliso e fosahetseng ea sehlahisoa
- Mathata a bakoang ke lebaka le fetang tebello ea boemo ba mahlale le theknoloji ha LS ELECTRIC e etsa sehlahisoa.
- Mathata a bakoang ke likoluoa tsa tlhaho
- Phetoho ea litlhaloso Litlhaloso tsa sehlahisoa li ka fetoha ntle le tsebiso ka lebaka la ntlafatso le ntlafatso ea sehlahisoa.
LS ELECTRIC Co., Ltd. www.ls-electric.com 10310000500 V4.5 (2021.11)
- E-mail: automation@ls-electric.com
- Ntlo-khōlō / Ofisi ea Seoul
- LS ELECTRIC Ofisi ea Shanghai (Chaena)
- LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China)
- LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam)
- LS ELECTRIC Middle East FZE (Dubai, UAE)
- LS ELECTRIC Europe BV (Hoofddorf, Netherlands)
- LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan)
- LS ELECTRIC America Inc. (Chicago, USA)
- Mohala: 82-2-2034-4033,4888,4703
- Mohala: 86-21-5237-9977
- Mohala: 86-510-6851-6666
- Mohala: 84-93-631-4099
- Mohala: 971-4-886-5360
- Mohala: 31-20-654-1424
- Mohala: 81-3-6268-8241
- Mohala: 1-800-891-2941
Feme: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnam-do, 31226, Korea
Litokomane / Lisebelisoa
 |
LS ELECTRIC XGT Dnet Programmable Logic Controller [pdf] Tlhophiso Tataiso XGT Dnet Programmable Logic Controller, XGT Dnet, Programmable Logic Controller, Logic Controller, Controller |
