WantJoin Thermal 12L/3.2 Gallon Stainless Steel Insulated Beverage Dispenser Instruction Manual

1. Увод

Thank you for choosing the WantJoin Thermal Insulated Beverage Dispenser. This dispenser is designed to maintain the temperature of your hot or cold beverages for extended periods, making it ideal for various events and daily use. Please read this manual thoroughly before first use to ensure proper operation and maintenance.

2. Безбедносна упутства

• Non-Heating Function: This is a NON-HEATING functional insulated beverage dispenser. It does not have a direct heating function.
• Немојте препунити: Avoid filling the dispenser beyond its maximum capacity to prevent spills and ensure proper lid sealing.
• Сигурни поклопац: Always ensure the lid is securely threaded and tightened before transport or use to prevent leaks.
• Стабилан пласман: Place the dispenser on a flat, stable surface to prevent tipping.
• Пажљиво рукујте: When carrying, especially with hot liquids, support the bottom of the dispenser in addition to using the carry handle.
• Чишћење: Refer to the Maintenance and Cleaning section for proper cleaning procedures. Do not immerse the entire unit in water.
• деца: Keep out of reach of children, especially when filled with hot liquids.

3. Производ је готовview

Familiarize yourself with the components of your WantJoin Insulated Beverage Dispenser.

Кључне компоненте:

• Изоловано тело: Constructed with food-grade stainless steel interior and exterior, featuring three-layered insulation.
• Threaded Lid: Spiral double-insulated drum cover for enhanced temperature retention and leak prevention.
• Visual Electronic Thermometer: LCD display for real-time temperature monitoring.
• чеп: Spring-back spigot with grooved interior design for easy, spill-free dispensing.
• Rotating Carry Handle: За удобан превоз.
• Foldable Tripod: For adjustable height and stability.

Слика 1: Завршеноview of the WantJoin Insulated Beverage Dispenser.

Слика 2: Детаљно view of the 3-layer insulation (Anti-Fingerprint Shell, PU Foaming Layer, 304 Food Grade Material) for effective temperature retention.

4. Подешавање

1. Raspakujte: Пажљиво уклоните све компоненте из паковања.
2. Прво чишћење: Before first use, wash the interior and lid with warm, soapy water. Rinse thoroughly and dry completely.
3. Install Spigot: Ensure the spigot is securely attached and tightened to prevent leaks.
4. Prepare Thermometer: The visual electronic thermometer requires a CR2032 button cell battery to operate. Insert or activate the battery as per the small instruction card provided.
5. Позиционирање: Place the dispenser on a stable, flat surface. If desired, extend the foldable tripod feet for increased height and stability.

Figure 3: Securely threading the lid onto the dispenser.

5. Упутство за употребу

За топле напитке:

1. Претходно загревање (опционо): For best results, pre-heat the dispenser by filling it with hot water for 5-10 minutes, then empty.
2. Попуни: Pour your hot beverage (e.g., coffee, tea, milk) into the dispenser.
3. Печат: Securely thread the lid onto the dispenser.
4. Монитор температуре: Check the temperature on the LCD display.
5. Дозирање: Place a cup under the spigot and push the lever down to dispense. Release the lever to stop.

За хладне напитке:

1. Претходно хлађење (опционо): For best results, pre-chill the dispenser by filling it with cold water or ice for 5-10 minutes, then empty.
2. Попуни: Pour your cold beverage (e.g., water, juice, iced tea) into the dispenser. Add ice if desired.
3. Печат: Securely thread the lid onto the dispenser.
4. Монитор температуре: Check the temperature on the LCD display.
5. Дозирање: Place a cup under the spigot and push the lever down to dispense. Release the lever to stop.

Figure 4: The dispenser is versatile for both hot and cold beverages, maintaining temperatures from -58°F to 230°F.

Figure 5: High efficiency hot and cold preservation, maintaining warmth for up to 12 hours.

6. Одржавање и чишћење

• После сваке употребе: Empty any remaining liquid.
• Само ручно прање: The dispenser is NOT dishwasher safe. Hand wash the interior and exterior with warm, soapy water.
• Spigot Cleaning: Ensure the spigot is thoroughly cleaned to prevent residue buildup. You may need to detach it for a more thorough cleaning.
• Темељно исперите: Rinse all parts with clean water to remove soap residue.
• Потпуно осушити: Allow all parts to air dry completely before reassembling and storing to prevent odors or rust.
• Thermometer Care: Avoid getting the thermometer unit wet. If it needs cleaning, wipe it gently with a damp тканина.

КСНУМКС. Решавање проблема

8. Спецификације

• Бренд: ЖелимПридружити се
• Број модела: WZNCT12LWDBBKUS
• Материјал: нерђајући челик
• Боја: Црно
• Капацитет: 12 литара (3.2 галона)
• Димензије производа: 9.2 cm D x 9.2 cm Š x 18.1 cm V
• Тежина артикла: 6 фунти
• изолација: Three-layered (Stainless Steel, PU Foaming Layer, Anti-Fingerprint Shell)
• Карактеристике: Visual Electronic Thermometer, Threaded Lid, Spring-back Spigot, Rotating Carry Handle, Foldable Tripod.

Figure 6: Detailed product dimensions for the 12L/3.2 Gallon dispenser.

9. Гаранција и подршка

For warranty information, technical support, or any inquiries regarding your WantJoin Insulated Beverage Dispenser, please refer to the product packaging or contact WantJoin customer service directly. Keep your purchase receipt for warranty claims.