AtomStack F03-0329-0AA1 Swift
Specifikimet
- Emri i produktit: AtomStack Swift
- Numri i modelit: F03-0329-0AA1
- Versioni: B
- Fuqia hyrëse: DC 24V
- Portet: Type-C Port (For PC Connection), Expansion Port (for Chuck, Roller, and Other Accessories)
- Treguesi i statusit: Solid blue when working
Udhëzimet e përdorimit të produktit
Lista e pjesëve:
- Asambleja e boshtit X
- Left Y-axis assembly (with motor)
- Right Y-axis assembly
- Përshtatës i energjisë
- Llave fija (Fixed wrench)
Getting to Know AtomStack Swift:
Familiarise yourself with the different assemblies and parts of the AtomStack Swift, including the X-axis assembly, left and right Y-axis assemblies, power adapter, and optical shaft.
How to Install Swift:
- Place the five assemblies as shown in the diagram. Ensure the X-axis assembly belt faces downward, and the Y-axis assembly with the motor is on the left.
- Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley. Ensure it is fully inserted and aligned parallel with the front X-axis assembly.
- If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
Lista e pjesëve
Getting to Know AtomStack Swift
How to install Swift
- Place the five assemblies as shown in the diagram.
Shënim: The X-axis assembly should have the belt facing downward, and the Y-axis assembly with the motor should be on the left. - Align and connect the five assemblies, then secure them using six M5×8 screws.
- Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley.
(Ensure it is fully inserted and aligned parallel with the front X-axis assembly)
- Install the laser module and tighten the thumb knob.
Shënim:
If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
- Connect the motor cable, limit switch cables, and laser cable as shown in the diagram to complete the installation.
Focusing Method:
Place the workpiece. Turn the focusing knob downward and loosen the thumb screw. Let the laser module drop until the knob touches the material. Tighten the screw to fix the module, then return the knob to its original position.
Këshillë:
When placing the material, use the X/Y axis scale lines for alignment. When using “Absolute Coords” mode in the software, the design will align with the material’s position.
- If the engraving quality deteriorates after prolonged use, adjust the eccentric nuts with the open-end wrench to improve it.
- Use the open-end wrench to adjust the eccentric nuts on the left and right Y-axes.
- Adjust them so that when the machine is tilted at a 45° angle, as shown, the X-axis slides down slowly and evenly.
ATOMSTACK Official Recommended Software
Mobile App Download Method：
Metoda e Shkarkimit të Softuerit të Kompjuterit:
Lidhja e shkarkimit të AtomStack Studio: https://atomstack.com/pages/atomstack-studio-software
- Official Download Link
https://atomstack.com/pages/atomstack-studio-software - Skanoni për të shkarkuar
Burimet e softuerit
LightBurn
Unofficial software. Requires a separate purchase
Metoda e Shkarkimit të Softuerit Lightburn: Lidhja e shkarkimit: https://lightburnsoftware.com/pages/download-trial
- Scan to download the configuration file “AtomStack_Swift_Vxxx.lbdev”
- Hapni programin LightBurn, zgjidhni: Pajisjet – Importi
-
Select “AtomStack_Swift_Vxxx.lbdev”, click “Open”, then “OK”. In the bottom right corner, select “AtomStack Swift”.
The machine will beep once to confirm the connection.
Shënim: If adding the device manually, set the “Baud Rate” in “Device Settings” to 460800
Udhëzues përdorimi
Na kontaktoni
Scan the QR code for more information:
- Unboxing & First Use
- Use with the AtomStack APP
- Zgjidhja e problemeve
- Mirëmbajtja
Shërbimi ndaj klientit:
- For the detailed warranty policy, please visit our official webfaqe: www.atomstack.com
- Për mbështetje teknike dhe shërbim, ju lutemi dërgoni email: support@atomstack.com
Prodhuesi:
Shenzhen AtomStack Technologies Co., Ltd.
Kodi postar: 518172
Adresa:
Kati i 17-të, Ndërtesa 3A, Faza II, Parku Inteligjent, Nr. 76, Avenue Baohe, Rruga Baolong, Distrikti Longgang, Shenzhen, Guangdong, Kinë.
Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 E, 3., as described in Laser Notice No.56, dated May 8, 2019.
FAQ
Çfarë duhet të bëj nëse has probleme gjatë instalimit?
If you face any difficulties during installation, refer to the video tutorial available on the official webfaqe ose kontaktoni mbështetjen e klientit për ndihmë.
Dokumentet / Burimet
 |
ATOMSTACK F03-0329-0AA1 AtomStack Swift [pdf] Manuali i Përdoruesit F03-0329-0AA1, A5 V3, F03-0329-0AA1 AtomStack Swift, F03-0329-0AA1, AtomStack Swift, Swift |