Legrand Plexo Waterproof Housing for Surface-Mounting

1. Hyrje

This instruction manual provides essential information for the safe and effective installation, operation, and maintenance of the Legrand Plexo Waterproof Housing for Surface-Mounting, 2 Positions, Grey (Model 069672L). Please read this manual thoroughly before beginning any work with the product and retain it for future reference.

2. Produkti i Mbaruarview

The Legrand Plexo Waterproof Housing is designed for surface mounting and provides a robust, waterproof enclosure for electrical components. This model features two positions, allowing for the installation of two modules or devices. Its grey finish ensures discreet integration into various environments.

Figura 2.1: Përpara view of the 2-position housing in vertical orientation.

Figura 2.2: Përpara view of the 2-position housing in horizontal orientation.

3. Specifikimet

4. Informacion mbi sigurinë

WARNING: Risk of electric shock. Installation should only be performed by a qualified electrician in accordance with all local and national electrical codes.

• Always disconnect power at the main circuit breaker or fuse box before installing or servicing this product.
• Sigurohuni që të gjitha lidhjet e kabllove të jenë të sigurta dhe të izoluara siç duhet.
• Do not exceed the maximum electrical ratings of the housing or any installed components.
• This product is designed for waterproof applications. Ensure all seals and covers are correctly installed to maintain its waterproof integrity.
• Mbajini fëmijët larg instalimeve elektrike.

5. Instalimi

Follow these steps for proper installation of your Legrand Plexo Waterproof Housing:

1. Përgatitni sipërfaqen e montimit: Ensure the surface is clean, dry, and structurally sound.
2. Disassemble the Housing: Carefully separate the components of the housing. The housing consists of a base body, insert, membrane seal, housing frame, and cover.

Figura 5.1: Shpërtheu view of the housing components. Note the generous wiring space.

3. Mount the Base Body: Secure the base body to the desired surface using appropriate fasteners.
4. Lidhja e instalimit elektrik të futjes: The insert can be removed tool-free by pressing sideways for easier wiring. The wiring can be done separately from the base plate and then simply clicked into place. The shallow depth of the base plate allows wiring without needing to separate the insert from the base body.

Figure 5.2: Insert removal for wiring.

Figure 5.3: Wiring connected to the insert before final assembly.

Figure 5.4: Wiring within the assembled base and insert.

5. Ensure Waterproof Seal: The housing includes a plaster compensation seal to level uneven surfaces, ensuring a proper waterproof seal.

Figure 5.5: Housing mounted with plaster compensation seal.

6. Bashkangjisni mbulesën: Once wiring is complete and the insert is securely in place, attach the cover. Unlatch, rotate, and re-engage the cover to secure it.

Figure 5.6: Steps for attaching the cover.

7. Kontrolli përfundimtar: Verify all connections are tight and the housing is properly sealed to maintain its waterproof rating.

6. Operacioni

Once properly installed, the Legrand Plexo Waterproof Housing functions as a protective enclosure for the electrical devices mounted within it. Operation of the devices inside the housing will depend on their specific functions (e.g., switches, outlets). Ensure the cover is always securely closed to maintain environmental protection.

7. Mirëmbajtja

• Pastrimi: Clean the exterior of the housing periodically with a soft, damp pëlhurë. Mos përdorni pastrues gërryes ose tretës.
• Inspektimi: Regularly inspect the housing for any signs of damage, cracks, or wear, especially around seals and cable entries. Replace the housing if any damage is found that could compromise its waterproof integrity.
• Integriteti i vulës: Ensure all seals remain intact and properly seated. If a seal appears damaged or degraded, it should be replaced to maintain the waterproof rating.
• Mbërthyes: Periodically check that all mounting fasteners are tight.

8. Troubleshooting

If you encounter issues with your Legrand Plexo Waterproof Housing, consider the following:

• Hyrja e ujit: If water is found inside the housing, immediately disconnect power to the enclosed devices. Check all seals, cable entries, and the cover for proper seating and damage. Ensure the mounting surface is even or that the plaster compensation seal is correctly applied.
• Komponentët e lirshëm: If any internal components feel loose, disconnect power and re-secure them according to installation instructions.
• Difficulty Closing Cover: Ensure no wires or debris are obstructing the cover's path. Check that the insert is fully seated.

For persistent issues or concerns, contact a qualified electrician or Legrand customer support.

9. Garanci dhe Mbështetje

Legrand products are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions applicable to your region and product, please refer to the official Legrand website or contact Legrand customer service directly.

For technical support, product inquiries, or to locate authorized service centers, please visit the official Legrand website or use the contact information provided with your purchase documentation.

Ky manual mund të ndryshojë pa paralajmërim. Ju lutemi referojuni versionit më të fundit të disponueshëm në faqen e internetit të prodhuesit. webfaqe.