Gewiss GW20287

Gewiss GW20287 Type F Orange Electrical Socket Instruction Manual

Model: GW20287 | Brand: Gewiss

1. Hyrje

This manual provides essential instructions for the safe installation, operation, and maintenance of your Gewiss GW20287 Type F Orange Electrical Socket. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and use are crucial for safety and optimal performance.

2. Informacion mbi sigurinë

KUJDES: Rrezik goditjeje elektrike. Instalimi duhet të kryhet nga një elektricist i kualifikuar në përputhje me të gjitha kodet lokale dhe kombëtare të energjisë elektrike.

  • Always disconnect power at the main circuit breaker or fuse box before attempting any installation, maintenance, or repair.
  • Sigurohuni që vëlltage and current ratings of the socket match your electrical system requirements.
  • Mos e instaloni në lagësht ose damp locations unless specifically rated for such environments.
  • Never attempt to modify the socket.
  • Mbajini fëmijët larg prizave elektrike.

3. Produkti i Mbaruarview

The Gewiss GW20287 is an orange, bi-axial 2P+T (two poles plus earth) socket designed for 16A applications, compatible with both Italian and German standard plugs. It is part of the Gewiss System series and occupies 2 modules in a standard electrical box.

Gewiss GW20287 Type F Orange Electrical Socket

Figura 1: Përpara view of the Gewiss GW20287 Type F Orange Electrical Socket, showing the two-pole plus earth configuration suitable for Italian and German standards.

4. Konfigurimi dhe instalimi

Installation should only be carried out by a qualified electrician.

  1. Shkëputja e energjisë: Locate the main circuit breaker or fuse box for the area where the socket will be installed. Turn off the power completely to prevent electric shock. Verify with a voltage testues.
  2. Përgatitja e instalimeve elektrike: Ensure the electrical wires (Phase, Neutral, Earth) are correctly identified and stripped to the appropriate length for connection.
  3. Lidhni telat: Connect the wires to the corresponding terminals on the back of the Gewiss GW20287 socket. Typically:
    • Phase (Live) wire (often brown or black) to the 'L' terminal.
    • Neutral wire (often blue) to the 'N' terminal.
    • Earth (Ground) wire (often green/yellow) to the 'E' or earth symbol terminal.
    Sigurohuni që të gjitha lidhjet të jenë të forta dhe të sigurta.
  4. Mount the Socket: Carefully place the socket into the wall box, ensuring no wires are pinched. Secure it using the mounting screws provided with the wall box or socket frame.
  5. Instaloni Faceplate: Attach the decorative faceplate (if applicable) over the socket.
  6. Rivendosni energjinë: Once installation is complete and all covers are securely in place, restore power at the main circuit breaker.
  7. Test: Test the socket with a known working appliance or a socket tester to ensure proper functionality.

5. Udhëzimet e funksionimit

To use the Gewiss GW20287 socket:

  1. Ensure the appliance plug is compatible with the Type F (Italian/German bi-axial 2P+T) socket.
  2. Insert the appliance plug firmly and completely into the socket.
  3. To remove, pull the plug straight out from the socket. Do not pull by the cord.

6. Mirëmbajtja

  • Pastrimi: Disconnect power before cleaning. Wipe the surface of the socket with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture.
  • Inspektimi periodik: Periodically check the socket for any signs of damage, discoloration, loose connections, or overheating. If any issues are observed, disconnect power and consult a qualified electrician.

7. Troubleshooting

If you experience issues with your Gewiss GW20287 socket, consider the following:

  • Pa fuqi:
    • Check the main circuit breaker or fuse box to ensure power is on.
    • Verify that the appliance plugged into the socket is working correctly by testing it in another known working socket.
    • If the issue persists, there may be an internal wiring problem. Contact a qualified electrician.
  • Lidhja e lirshme: If a plug feels loose in the socket, or if there is intermittent power, disconnect power and have a qualified electrician inspect the socket and its connections.
  • Mbinxehje/erë djegieje: Immediately disconnect power at the circuit breaker. Do not use the socket. This indicates a serious electrical fault. Contact a qualified electrician immediately.

8. Specifikimet

MarkëGewiss
Numri i modelitGW20287
LlojiType F (Italian/German Bi-axial 2P+T)
Amptërbim16 Amppara kohe
Modulet2 module
Ngjyraportokalli
Dimensionet (J x P x H)4.6 x 4.4 x 4.2 cm
Pesha9.07 g

9. Garancia dhe Mbështetja

For warranty information and technical support, please refer to the official Gewiss website or contact your local Gewiss distributor. Keep your purchase receipt as proof of purchase.

You can visit the official Gewiss store for more information: Gewiss Store

Dokumente të Ngjashme - GW20287

Paraview Priza RCD GEWISS 90: Udhëzuesi i instalimit dhe specifikimet
Udhëzues gjithëpërfshirës për instalimin dhe përdorimin e prizës GEWISS 90 RCD. Përfshin specifikimet teknike, diagramet e instalimeve elektrike për sistemet TT, TN-S, TN-C, udhëzimet e instalimit dhe procedurat e testimit.
Paraview Udhëzuesi i Lidhjes së Furnizimit me Energji GEWISS JOINON WALLBOX I-CON
Udhëzime për lidhjen e furnizimit me energji në stacionin e karikimit të automjeteve elektrike GEWISS JOINON WALLBOX I-CON, duke detajuar instalimet elektrike për konfigurimet 2P+ dhe 3P+N.
Paraview GEWISS CHORUSMART CVD 4X10A DIN Rail LED Dimmer Booster - Technical Specifications
Detailed technical specifications and installation guide for the GEWISS CHORUSMART CVD 4X10A DIN rail booster, designed to extend LED dimmer control capacity.
Paraview GEWISS JOINON GWJ8037 & GWJ8038 RJ45 Network Interface Installation Guide
Installation and system overview for GEWISS JOINON GWJ8037 (1PH) and GWJ8038 (3PH) RJ45 CAT. 5 F/UTP network interface modules, including wiring diagrams and system integration with solar power.
Paraview Moduli i Komandës Aksiale Ndihmëse GEWISS Chorusmart GW10677/GW10678: Udhëzuesi i Instalimit dhe Teknik
Udhëzues gjithëpërfshirës për modulet ndihmëse të komandës aksiale GEWISS Chorusmart GW10677 dhe GW10678. Mbulon sigurinë, informacionin e përgjithshëm, funksionet LED, lidhjen e pajisjeve.ampLes, montim, mirëmbajtje dhe specifikime teknike për automatizimin e shtëpisë inteligjente.
Paraview Udhëzues i shpejtë për instalimin e JOINON WALLBOX I-CON BASIC - GEWISS
Udhëzues konciz instalimi për stacionin e karikimit GEWISS JOINON WALLBOX I-CON BASIC EV. Mësoni se si ta montoni dhe ta lidhni njësinë në mënyrë të sigurt me udhëzime hap pas hapi dhe përshkrime vizuale.