SPEC SHEET – ES3
Zip InLine ES3 Electronic Instantaneous Water Heater
Zip Inline ES
Zip InLine ES3 electronic instantaneous water heater single outlet for hand washing. Compact design, featuring bare-wire for fast heat up, no standing heat losses. Easy to install and service.
| MODEL | ENERGY CLASS (H/C) | MIN/MAX FLOW RATE | NOMINAL POWER RATING KW | DIMENSIONS WXDXH |
| ES3 | A | 1.2lpm / 2lpm | 2.8 kW @ 230V AC | 186mm x 87mm x 135mm |
Features and benefits
- Compact electronic instantaneous water heater with highly energy efficient bare wire system for economic water supply to a single outlet.
- The innovatively designed appliance heats the water automatically as it flows through, without wasting energy in standby operation.
- The heating power electronically compensates for variable inlet pressures and temperatures.
- Outlet temperature factory set to 38°C, but can be installer adjusted between 30°C to 43°C.
- Intended for use with taps having M22 /M24 nozzles.
- Easy to install and service.
Product detail
Specification type
| Product code | ES3 |
| Product name | InLine ES3 Instantaneous 2.8kW |
| Energy efficiency class | A |
| Element type | Bare Wire Heating System |
| IP rating | 25 |
Capacity, weights & dimensions
| Product weight | 1.3kg |
| Filled Product Weight | 1.5kg |
| Unit dimensions (W x D x H) mm | 186 x 87 x 135 |
Electrical
| Nominal power rating | 2.8 kW @ 230V AC |
| Nominal power supply | 230V |
| Nominal rated current | 12 amps |
Plumbing
| Wholesome water supply | Yes |
| Water connection Size | 1/2″BSP |
| Min water pressure | 0.2bar |
| Max water pressure | 10bar |
| Minimum flow rate l/pm | 1.2 |
| Maximum flow rate l/pm | 2 |
| Temperature increase at maximum flow rate | 26.7°C |
| Minimum water resistance @ 15oc | >1,100 Ω |
| Installation – Plumbing (H/C) | The appliance is intended for connection to the wholesome water supply. It should be installed by a suitably qualified person. The appliance may be used as an unvented installation (as shown in the diagram opposite) or as a vented installation. |
The minimum water pressure will vary if a limescale filter is installed. Please contact us to discuss your requirements.
Typical Installation
Energy Certificate
37a Villa Wood Road, Dromore, County Down.
Northern Ireland BT25 1LG
w. spatec.co.uk
e: info@spatec.co.uk
t: 0044 28 9269 9200
Documents / Resources
 |
SPATEC Zip InLine ES3 Electronic Instantaneous Water Heater [pdf] Owner's Manual ES3, Zip InLine ES3 Electronic Instantaneous Water Heater, Zip InLine ES3, Electronic Instantaneous Water Heater, Instantaneous Water Heater, Water Heater, Heater |