Spatec NI Ltd online store
Owner's Manual for SPATEC models including: ES3, Zip InLine ES3 Electronic Instantaneous Water Heater, Zip InLine ES3, Electronic Instantaneous Water Heater, Instantaneous Water Heater, Water Heater, Heater
Zip ES3 2.8 Kw Electronic Instantaneous hand wash unit – Spatec NI Ltd Click
File Info : application/pdf, 4 Pages, 298.79KB
DocumentDocumentZip Inline ES Zip InLine ES3 electronic instantaneous water heater single outlet for hand washing. Compact design, featuring bare-wire for fast heat up, no standing heat losses. Easy to install and service. SPEC SHEET - ES3 MODEL ES3 ENERGY CLASS (H/C) A MIN/MAX FLOW RATE 1.2lpm / 2lpm NOMINAL POWER RATING KW DIMENSIONS WXDXH 2.8 kW @ 230V AC 186mm x 87mm x 135mm Features and benefits Compact electronic instantaneous water heater with highly energy efficient bare wire system for economic water supply to a single outlet. The innovatively designed appliance heats the water automatically as it flows through, without wasting energy in standby operation. The heating power electronically compensates for variable inlet pressures and temperatures. Outlet temperature factory set to 38oC, but can be installer adjusted between 30oC to 43oC. Intended for use with taps having M22 /M24 nozzles. Easy to install and service. 37a Villa Wood Road, Dromore, County Down. Northern Ireland BT25 1LG w. spatec.co.uk e: info@spatec.co.uk t: 0044 28 9269 9200 Product detail Specification type Product code Product name Energy efficiency class Element type IP rating ES3 InLine ES3 Instantaneous 2.8kW A Bare Wire Heating System 25 Capacity, weights & dimensions Product weight Filled Product Weight Unit dimensions (W x D x H) mm 1.3kg 1.5kg 186 x 87 x 135 Electrical Nominal power rating Nominal power supply Nominal rated current 2.8 kW @ 230V AC 230V 12 amps Plumbing Wholesome water supply Yes Water connection Size 1/2"BSP Min water pressure 0.2bar Max water pressure 10bar Minimum flow rate l/pm 1.2 Maximum flow rate l/pm 2 Temperature increase at maximum flow rate 26.7°C Minimum water resistance @ 15oc >1,100 Installation - Plumbing (H/C) The appliance is intended for connection to the wholesome water supply. It should be installed by a suitably qualified person. The appliance may be used as an unvented installation (as shown in the diagram opposite) or as a vented installation. The minimum water pressure will vary if a limescale filter is installed. Please contact us to discuss your requirements. 37a Villa Wood Road, Dromore, County Down. Northern Ireland BT25 1LG w. spatec.co.uk e: info@spatec.co.uk t: 0044 28 9269 9200 Typical Installation 37a Villa Wood Road, Dromore, County Down. Northern Ireland BT25 1LG w. spatec.co.uk e: info@spatec.co.uk t: 0044 28 9269 9200 Energy Certificate 37a Villa Wood Road, Dromore, County Down. Northern Ireland BT25 1LG w. spatec.co.uk e: info@spatec.co.uk t: 0044 28 9269 9200 Powered by TCPDF (www.tcp df.o rg)