Sparkleiot Mini DIY Mini DIY WiFi Smart Switch
Specifications
- OPERATION MODE: ON-OFF-ON
- CURRENT RATING: 16 Amps
- OPERATING VOLTAGE: 220 Volts
- CONTACT TYPE: Normally Open
- CONNECTOR TYPE: Plug In
- BRAND: Sparkleiot
- CONTROLLER TYPE: Android, iOS, Amazon Alexa, Google Assistant
- MATERIAL: Acrylonitrile Butadiene Styrene
- NUMBER OF ITEMS: 1
- OPERATING VOLTAGE: 220.00 volts
- OPERATION MODE: ON-OFF-ON
- SPECIFICATION MET: RoHS
- SWITCH TYPE: Dimmer Switch
- PART NUMBER: Mini DIY WiFi Smart Switch
- UNSPSC CODE: 39122200
- PRODUCT DIMENSIONS: 1.85 x 1.69 x 0.98 inches; 1.38 Ounces
Introduction
Google Home Assistant and Alexa (Amazon Echo, Echo Dot, and Tap) are both compatible with the Mini DIY WiFi Switch. It enables hands-free operation and voice control of household appliances. With the help of the Smart Life APP, all Tuya devices can be controlled from any location with just a single tap on an iOS or Android smart phone. Note: Only 2.4GHz Wi-Fi is supported; 5GHz Wi-Fi is not supported. You can set up smart scenes so that one device can turn on or off another, or you can unite several devices into one group and tap to start them all at once. Additionally, you can adjust the timing and schedule to suit your demands, giving you a more intelligent life.
Restarting the electricity after a power outage allows you to retain the condition of your equipment without worrying about it changing. Before the power was shut off, it was in the open state, and when the power is switched back on, the open condition is automatically restored. (Memory mode can be adjusted to open, close, or turn off.) Your outlet and switch can be made smart with the installation of a small smart Wifi switch in the junction box. For your safety, products must be FCC/CP65/ROHS certified and support overheating and overloading.
PRODUCT DESCRIPTION
BUTTON DESCRIPTION
Short press to power on/off the socket. Long press for 5 seconds to reset the socket. Tum on/off switch-1 to power on/off the socket.
HOW TO RESET THE SOCKET TO THE FACTORY MODE?
- Long press the button for 5 seconds, The buzzer makes a “di di di” sound, (The indicator LED will blink) that means the socket already is set to factory mode.
- Turn on/off the switch_1 for 10 times The buzzer makes a “di di di” sound, (The indicator LED will blink) that means the socket already is set to factory mode.
DOWNLOAD APP
Scan the following QR Code or search “Smart Life” in APP store for iOS version or in Google Play for Android version.
ADD DEVICE:
- STEP1: Log in and sign up your Smart Life APP;
- STEP2: Confırm the phone is connected to Wi-Fi (ONLY support 2.4G Wi-Fi network), and click the upper right corner “+” icon in Smart Life APP;
- STEP3: Select the corresponding Wi-Fi Socket device icon;
- STEP4: Input the router password;
- STEP5: Please follow the instructions on the APP interface to add the device by following;
HOW TO USE THE THIRD-PARTY PLATFORM FOR VOICE CONTROL
- STEP1: Open the “Me” menu bar at bottom of the Smart Life APP
- STP2: Select corresponding “More Services”;
- STEP3: Click on the third-party service platform you want to access;
- STEP4: Please follow the instructions on the APP interface to use the the voice control;
WIRING DIAGRAM
DURING THE NETWORK CONFIGURATION, IS THERE ANYTHING THAT I SHOULD PAY ATTENTION TO?
- If your router is dual-frequency, please set different passwords for 2.4GHz and 5GHz.Or you can turn off the 5GHz.Please disable the dual-frequency function.
- If you still can’t connect the smart device with your phone, please reset the router to factory settings or replace the router and try again.
Frequently Asked Questions
Over-voltage protection is frequently included into smart plugs, causing them to shut off automatically when the maximum voltage is reached. If you reside in a location where surges are frequent, keep this in mind.
Even if the Wi-Fi is down, smart light switches will function. The majority of their smart functions will be lost, but they will still work as standard light switches in the absence of an internet connection.
Transferring data between tablets, smartphones, and tablets and smartphones is possible using Smart Switch. Please be aware that iOS 4.2 or Android 4.3 must be installed on your phone in order to use Smart Switch. Both Android and iOS devices allow you to upload data over Wi-Fi, a USB connection, a PC, or a Mac.
It has a significantly wider range, can set routines, and can manage up to 50 lights.
Yes, using current LED fixtures and bulbs. The smart switch’s intended usage is to enable the use of normal lights while utilizing all of its integrated smart features. a LOT more practical than smart lighting. The switch was continuously being used to turn off the lights by my family.
But it’s important to understand that smart switches will consume more energy than a regular switch. A ZigBee or Z-Wave switch will typically use about 0.5 watts of power at idle, compared to two watts for smart switches with Wi-Fi controls.
Temporary blackouts of the neighborhood power grid brought on by an electrical storm or strong winds are among the most typical causes of flickering lights. Once the storm has passed, this issue will typically resolve itself.
When a light bulb flickers on and off, the switch contacts are likely becoming damaged. If the switch contacts are faulty, you’ll typically hear a sizzling or crackling sound. In this situation, swap out the switch. Another possibility is that the cable connections are sloppy.
A 3-way switch features three screw terminals for wire connections in addition to a ground and is larger than a single pole switch. These two accept traveler wires that connect one switch to the next. One switch is connected to the hot supply wire and the second switch is attached to the light for the third terminal.
Smart bulbs take the place of standard bulbs while maintaining compatibility with conventional light switches. Your smart bulb can still be turned on and off using your light switch, but you’ll probably want to leave it on all the time.
