SourceSecurity S3 Digital Video Recorder User Manual

S3 Digital Video Recorder

Product Information

Specifications:

  • Product Name: Recorder S3
  • User Manual: Included
  • Installation: Windshield mount
  • Compliance: FCC Part 15
  • RF Exposure Guidelines: Minimum distance of 20cm between
    radiator and body

Product Usage Instructions

Installation Guide:

This product should be installed on the windshield for optimal
front traffic view. Ensure compliance with local laws regarding
windshield device mounting.

WIFI Interconnection:

Follow the user manual instructions for WIFI setup and
connection to enable additional features.

Key Function Description:

Confirm Key/Toggle Key:
– Confirm key: Inserting a non-matching TF card prompts formatting,
confirm by short pressing.
– Switch key: In standby mode, short press to switch display date,
WIFI info, and QR code APP.
– Switch: Press and hold for 5s to turn on/off.

FAQ (Frequently Asked Questions)

Q: Can I disassemble the device for cleaning purposes?

A: Disassembling the device may void the warranty. Please
consult professional help if cleaning is required.

Q: What should I do if the video recording is not functioning
properly?

A: Ensure the TF card is compatible, follow formatting prompts,
and operate the device only when the vehicle is parked.

Q: How can I ensure compliance with FCC guidelines?

A: Follow the guidelines provided in the manual, maintain a
minimum distance of 20cm between the device’s radiator and your
body.

“`

Recorder
S3 User Manual

Information for Users
Please read carefully before use and observe the matters listed therein to ensure safe and trouble-free long-term use of this product. ·Do not place the product in a humid working environment, the product is not waterproof, please avoid getting the product wet or exposed to rain. ·Do not use harsh chemicals, cleaning solvents or detergents to clean this product. ·Do not point the camera directly at the sun and other super light sources to avoid damage to the optics. ·Do not use it in a dusty environment, so that the lens and other parts will not be contaminated with dust, which may affect the video effect. ·The TF memory card is not allowed to be unplugged with electricity, so as not to damage the data. ·Please use genuine brand C10 U3 grade or above TF memory card.
Notice
As the specifications may be changed due to the technical upgrades, reserves the right to change, modify, add or remove portions of these terms at any time without prior notice. Please note that this product is for personal use only and may not be used in violation of national or international copyright/privacy laws. The recorded images are for personal use only and may not be distributed to the public. The use of this product to record images of performances, exhibitions or commercial activities may infringe the legal rights of the others.
Warning
Dissembling the device may void the warranty. Please read the instructions carefully before installing or ask for professional help. Do not change any settings while driving only after the vehicle is parked.
Installation Notice
This product should be installed onto the windshield in order to obtain the best view of the front traffic. However, some states prohibit drivers frommounting devices on the windshield or on certain area of the windshield. It is owner’s responsibility to mount and use this device in compliance with local laws.
-1-

herald
·For the safety of your life and the lives of others, please do not watch videos or operate in-car video players while driving your vehicle. State regulations prohibit watching videos and operating in-car video players while driving a vehicle. · Some of the features of this product can only be used as an aid when you are driving your vehicle, and it does not mean that you can be distracted, careless or even lose your judgment when you are driving your vehicle. We do not assume any legal responsibility for any safety accidents caused by this product. · The pictures and contents of this brochure are for reference only, and we are not responsible for any misunderstanding. · Electronic products updated and upgraded quickly, such as hardware and software upgrades, the operating interface has changed without notice, to the actual machine operation shall prevail.
A. Installation guide
1. Turn off the car engine. 2. Insert the TF card correctly into the recorder card slot. [Note] Please use genuine high-speed TF card (Class10 U3 and above), capacity is not less than 8GB, maximum support 128G. 3. Fix the recorder in place on the windshield of the car. 4. Connect the vehicle power cord to the cigarette lighter port. 5. Connect the power cord to the Type-C connector of the recorder. [Note] When wiring, the vehicle power cord can be laid along the edge of the windshield. 6. Install the rear camera near the rear license plate of the vehicle and pay attention to the direction when installing it. Wiring can be routed along the roof of the vehicle, and after installation, connect the rear view plug to the rear view interface of the recorder. 7. Adjust the angle ofthe lens to ensure that the lens is level with the ground. 8. Start the engine and check if the machine is installed correctly. [Note] When the machine is installed correctly, the machine starts to enter the recording state, and the video indicator flashes.
-2-

B. WIFI interconnection
WIFI interconnection method: Scan the QR code above to download APP. or enter Setting, WIFI interface on the machine and scan the code to download Mobile Connected APP. Turn on the WIFI switch on your cell hone, find the machine WIFI name: S3XXX, enter the password 12345678, you can enter the Wind Recorder APP on your cell phone to carry out interconnection operation. Note: When connecting the device WIFI, the cell phone pop-up box prompts whether to use the WIFI network, point to confirm the choice, before you can carry out the interconnection operation.
C. Key function description
Confirm key/toggle key Function 1: Confirm key When inserting TF card that does not match the machine, it will automatically pop up the window to prompt formatting. After short press the key to confirm the formatting, the video can be recorded normally. Function 2: Switch key In standby preview and recording mode, short press can switch the display date, WIFI information and QR code APP Function 3: Switch Press and hold 5S to turn on and off
-3-

Notice
·Please insert the rear view plug into the machine correctly before powering on the machine. ·Do not plug and unplug the rear view head with electricity, or you will lose the signal and even damage the rear view. ·Do not touch the lens with your fingers and clean the lens surface regularly. ·Please mount the rear view head near the rear license plate. ·Reverse Rear View screen is only an auxiliary reference, please refer to the actual environment safety.
Disclaimer
The audio and videos recorded by the dashcam are for reference only. The following situations may damage or lose recorded footages: 1. Pulling out the SD card while recording may cause the last recorded file to be lost. 2. The last image or video may be damaged or lost, if the dashcam suddenly lost power. 3. If the vehicle experience a major collision, the dashcam may be damaged; thus the files and data may also be damaged or lost. 4. Major collision during recording may cause the memory card to loosen or disconnect which may lead to data loss. is not liable for any type of loss resulting from the use of this device. 5. You should not set/install this dash cam at a place that would obstruct or reduce a driver’s view; make sure your usage complies with pertinent vehicle codes of your state, province, territory or country.
-4-

FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
NOTE2: Any changes or modifications to this unit not expressiveness by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Statement To maintain compliance with FCC’S RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operation conjunction with any other antenna or transmitter.
-5-

Documents / Resources

SourceSecurity S3 Digital Video Recorder [pdf] User Manual
S3, S3 Digital Video Recorder, Digital Video Recorder, Video Recorder

References

Leave a comment

Your email address will not be published. Required fields are marked *