Glow A2337 Portable Speaker
“
Specifications
- Power Button
- Power LED
- Light Effect Button
- Play/Pause Button
- Volume Up Button
- Bluetooth Button
- Bluetooth LED
- PartyCast Button
- Volume Down Button
- Strap
- AUX Input Port
- USB-C Charging Port
Product Usage Instructions
Charging Your Speaker
- Flashing Red: Low Battery
- Steady Red: Being Charged
- Steady White: Fully Charged
Powering On / Off
- Press: Steady White – Power On
- Press and Hold for 2 Seconds: Power Off
This speaker will power off automatically after 20 minutes if no
device is connected.
Using Your Speaker
Bluetooth Mode
Press the Bluetooth button to enter Bluetooth pairing mode, then
select soundcore Glow from the Bluetooth list to connect.
TWS Mode (True Wireless Stereo)
Two identical soundcore speakers can pair for stereo sound.
Press and hold the Bluetooth button for 2 seconds on two speakers
to enter TWS pairing mode.
PartyCast Mode
Press the PartyCast button on up to 100 soundcore speakers with
PartyCast function to synchronize audio and light.
Light Modes
The light on the speaker changes with the rhythm of the music.
There are 5 preset music-sync light modes available.
AUX-In Mode
Use the AUX input port for wired connections.
FAQ
Q: How do I check the battery status of the
speaker?
A: The battery status is indicated by the LED lights (Flashing Red,
Steady Red, Steady White).
Q: How do I pair two speakers for stereo
sound?
A: Press and hold the Bluetooth button for 2 seconds on both
speakers to enter TWS pairing mode.
Q: How many light modes are available on the
speaker?
A: There are 5 preset music-sync light modes available on the
speaker.
“`
At a Glance
Power Button Power LED Light Effect Button Play/Pause Button Volume Up Button Bluetooth Button
Bluetooth LED PartyCast Button Volume Down Button Strap AUX Input Port USB-C Charging Port
Charging Your Speaker
· Use a certified USB-C cable and charger to prevent any damage.
Flashing Red Steady Red Steady White
Low Battery Being Charged Fully Charged
Powering On / Off
Press Steady White Press and Hold for 2 Seconds Light Off
Power On Power Off
This speaker will power off automatically after 20 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode Press the Bluetooth button to enter Bluetooth pairing mode, then select “soundcore Glow” from the Bluetooth list to connect.
Glow
Press Flashing Blue Steady Blue
PAIRING CONNECTED
Enter Bluetooth Pairing Mode Bluetooth Pairing Bluetooth Connected
· To re-enter Bluetooth pairing mode, press the Bluetooth button once. · This speaker can only play music on one mobile device at a time. To play from another connected
device, pause the device that’s currently active first. · Each time you power on your speaker, it will automatically connect to your last connected device if
available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.
TWS Mode Two identical soundcore speakers can pair with each other for stereo sound. Both speakers can play the same audio (one as the left channel and the other as the right channel). With one speaker connected to a smartphone, press and hold the Bluetooth button for 2 seconds on two speakers to enter TWS pairing mode.
Speaker 1
1
Speaker 1
Speaker 2
2
Speaker 1/ Speaker 2 Speaker 1
Speaker 2
2s
PAIRING
CONNECTED CONNECTED
Press and Hold for 2 Seconds Flashing White Steady Blue (Speaker 1) Steady White (Speaker 2)
Enter TWS Pairing Mode TWS Pairing
TWS Connected
· To exit TWS mode, press and hold the Bluetooth button for at least 2 seconds.
PartyCast Mode With one speaker connected to a smartphone, press the PartyCast button on up to 100 soundcore speakers with PartyCast function to synchronize audio and light.
1
2
3
×1
×1
PAIRING
PAIRING
CONNECTED
Primary Speaker
CONNECTED
Press Flashing White Steady White
Enter / Exit PartyCast Pairing Mode PartyCast Pairing PartyCast Connected
soundcore speakers with PartyCast function can also be connected with this speaker.
Light Modes The light on the speaker changes with the rhythm of the music. There are 5 preset music-sync light modes: Campfire Vibes / Neon Night / Spring Break / Euphoric Dance / Romantic Stroll. You can also check all available light modes in the soundcore app.
Press
Switch Light Modes
Press and Hold for 2 Seconds
Turn off
AUX-In Mode
AUX
AUX
· AUX cable is not included. · When using AUX-In mode, control audio playback via the connected device.
Button Controls
Press Press and Hold for 2 Seconds
Power On Power Off
Press Press Twice Press Three Times Press Press and Hold for 2 Seconds Press and Hold for 2 Seconds Press Press and Hold for 2 Seconds Press Press and Hold for 2 Seconds
Play / Pause Next Track Previous Track Answer / End a Call Reject a Call Activate Voice Assistant Software Enter Bluetooth Pairing Mode Enter / Exit TWS Pairing Mode Switch Light Modes Turn off
Press Press
Volume Up / Down Enter / Exit PartyCast Pairing Mode
soundcore App
Download the soundcore app to enhance your experience.
soundcore
Google Play and the Google Play logo are trademarks of Google Inc.
Apple and the Apple logo are trademarks of Apple Inc.
Product information: Check the product name and software version, or read the user guide. Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker with the app. Battery status: Indicates the remaining battery level of your speaker.
Volume control: Adjust the volume level via the app without pressing the buttons on the speaker. EQ settings: There are 4 preset EQ settings you can choose from in the app to optimize your experience while enjoying different music genres. · soundcore Signature: Standard EQ mode optimized for well-balanced sound. · Voice: Voices stand out more clearly from other ambient sounds. · Balance: No enhancement for high-frequency and low-frequency sounds. · BassUp: Turn on BassUp to enhance the low-frequency sound. Set auto-power off time: Set an auto-power off time. The speaker will automatically turn off when the time is up. Light effects: Besides the music-sync light effects, you can also choose your favorite light effects. Voice prompt: Mute or restore the voice prompt while powering on/off.
Reset
Press and hold the Bluetooth button and volume up button simultaneously for at least 4 seconds to reset the speaker.
Specifications
DC Power Input
5V 3A
Battery Capacity
3350mAh/7.2V
Audio Output Power
30W
Speaker Driver
2.5″ Full Range x1
Charging Time
4 Hours
Play Time (varies by volume level and music content) Up to 18 Hours
Waterproof Level
IP67
Bluetooth Version
5.3
Bluetooth Range
100m / 328ft
Note: The ‘x’ of SN Code: xxxxxxxxxxxxxxxx is a variable, see below table.
Variable ‘x’ Seventh Eighth Ninth and tenth Eleventh The last five
Range of variable 0-9 or A-F 8,9,A,B,C… 01,02,03… 1-7 00001-99999
Content Denotes the hardware version which is not effected on the safety compliance. Denotes the year, 8 means 2018, 9 means 2019, A means 2020, B means 2021, C means 2022, and so on. Denotes weeks, 01 means the first week in this year, 02 means the secondary week in this year, and so on. Denotes date, 1 means Monday, 2 means Tuesday…, 7 means Sunday and so on. Denotes serial No.
1. Power consumption in standby mode: 0.5W 2. Power management: 20min 3. Information of applicable adapter: Brand: ANKER Manufacturer: Anker Innovations Limited Model: A2337 Input: 100-240V~ 1.0A, 50-60Hz Output: 5.0V 3.0A 15.0W / 9.0V 3.0A 27.0W / 12.0V 2.5A 30.0W / 15.0V 2.0A 30.0W / 20.0V 1.5A 30.0W (30.0W Max)
Default Open Port: Classic Bluetooth + BLE (Bluetooth Low Energy) Port Description: After the device is powered on, both Classic Bluetooth visibility (or pairing mode) and BLE broadcasting are automatically enabled, providing Bluetooth pairing (or control) services. The Bluetooth service is disabled when the device is powered off.
Documents / Resources
 |
soundcore Glow A2337 Portable Speaker [pdf] User Guide V03, A3166, Glow A2337 Portable Speaker, Glow A2337, Portable Speaker, Speaker |