sonoff S60TPF Wi-Fi Smart Plug User Manual

Introduction

A “safe and reliable” Wi-Fi Smart Plug with main functions such as remote control, monitoring, and voice control. You are able to check the daily/monthly power consumption on the energy overview page in the ewe Link App. Home automation can be achieved by the configuration of smart scenes, timers, schedules, etc.

• Remote Control

  

• Timers/Schedule

  

• Voice Control

  

• Device Sharing

  

• Smart Scene

  

• Inching Mode

  

• Energy Overview

  

• Over-load Protection

  

1. Button

   Press once: Turn on/off the smart plug. Press and hold for 5 seconds : Device enters the pairing mode.

2. Wi-Fi LED indicator (Blue)

   Keeps on: Device is online. Two short and one long flashes: Device is in pairing mode. Quick flash: Router not connected. Flash twice: Connected to the router, noninfected to the cloud. Flash three times: Firmware upgrade in progress.

3. Power LED indicator (Red)
   Light on: The device is on. Light off: The device is off.

   

Compatible Voice Assistants

Specification

Model	S60TPF
MCU	ESP32-C3
Input	250V~,50/60Hz,16A
Max. Load	4000W
Wireless Connectivity	Wi-Fi IEEE 802.11 b/g/n 2.4GHz
Net Weight	79g
Dimension	50x50x61.5mm
Color	White
Casing Material	PC V0
Applicable Place	Indoor
Working Temperature	-10℃~40℃
Working Humidity	5%~95% RH, non-condensing
Certified Compliance	CE/RoHS

Add Device

1. Enter “Scan”
   
2. Scan the QR code on the device
   
3. Select “Add Device”
   
4. Plug in
   
5. Long press the button for 5 seconds
   
6. Check Wi-Fi LED indicator flashing status (Two short and one long flashes)
   
7. Search for the device and start connecting
   
8. Select the “Wi-Fi” network and enter the password
   
9. Device added completely
   

EU Declaration of Conformity

Hereby, Shenzhen Soloff Technologies Co., Ltd. declares that the radio equipment type S60TPF is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

https://sonoff.tech/usermanuals

Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user

For CE Frequency

Operation frequency Range
BLE: 2402-2480MHz
Wi-Fi Operation Frequency: 802.11 b/g/n20 2412-2472 MHz，802.11 n40: 2422-2462 MHz
RF Output Power: BLE: ≤10dBm，Wi-Fi: ≤20dBm

WEEE Disposal and Recycling Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as i direct/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

Manufacturer: Shenzhen Soloff Technologies Co., Ltd.
Address: 3F & 6F, Bldg. A, No. 663, Belong Rd, Shenzhen, Guangdong, China

ZIP code: 518000
Service email: support@itead.cc
Website: sonoff.tech
Made in China

Documents / Resources

	sonoff S60TPF Wi-Fi Smart Plug [pdf] User Manual S60TPF Wi-Fi Smart Plug, S60TPF, Wi-Fi Smart Plug, Smart Plug, Plug
	SONOFF S60TPF Wi-Fi Smart Plug [pdf] User Guide S60TPF Wi-Fi Smart Plug, S60TPF, Wi-Fi Smart Plug, Smart Plug, Plug
	SONOFF S60TPF Wi-Fi Smart Plug [pdf] User Guide S60TPF Wi-Fi Smart Plug, S60TPF, Wi-Fi Smart Plug, Smart Plug, Plug

References

• User Manual