SONOFF Pro-120 Control Panel Smart Home Automation
Power off
- Please install and maintain the device by a professional electrician. To avoid electric shock hazards, do not operate any connection or contact the terminal connector while the device is powered on!
Wiring instruction
- Make sure all wires are connected correctly.
Download the eWeLink App
Installation
POWER NO
- After powering on, click “Start,” choose the language and region, and then select Wi-Fi and input the password to enter the device’s main interface.
Log In
- Tap “Log In” on the device and tap “+” on the eWeLink App to select “Scan”, then scan the QR code on the device screen by your App.
User Manual
Scan the QR code or visit the website to learn about the detailed user manual and help.
FCC
FCC compliance statement
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ISED Notice
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES – 003(B). This device complies with RSS – 247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.
ISED Radiation Exposure Statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
SAR Warning
Under normal use conditions, this equipment should keep a separation distance of at least 20 cm between the antenna and the body of the user.
EU Declaration of Conformity
Hereby, Shenzhen Sonoft technologies Co., Ltd declares that the radio equipment type NSPanel120PW/NSPanel120PB complies with Directive 2014/53/EU. The full text of the EU declaration of Conformity is available at the following internet address: https://sonoff.tech/compliance/
For CE frequency
EU Operating Frequency Range
Wi-Fi:
- 802.11 b/g/n20 2412-2472 MHz
- 802.11 n40: 2422-2462 MHz
- BT: 2402-2480 MHz
- Zigbee : 2405-2480 MHz
EU Output Power
- Wi-Fi 2.4G≤20dBm
- BT≤10dBm
- Zigbee≤10dBm
This product is only suitable for safe use at altitudes below 2000m.
Warning:
A suitable circuit breaker in accordance with Annex L of standard TEC/UL/CSA/EN 62368-1 shall be incorporated in the electrical installation of the building. A suitable circuit breaker shall be provided as part of the building installation.
The product should be installed in concrete wall or other non-combusti- ble locations.
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.
CONTACT INFORMATION
- Shenzhen Sonoff Technologies Co., Ltd.
- 3F & 6F, BIdg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China
- ZIP code: 518000
- Website: sonoff.tech
- Service email: support@itead.cc
- MADE IN CHINA
Documents / Resources
 |
SONOFF Pro-120 Control Panel Smart Home Automation [pdf] User Guide Pro-120 Control Panel Smart Home Automation, Pro-120, Control Panel Smart Home Automation, Smart Home Automation, Home Automation, Automation |
